NKR-LS02Keypad

Keypad Quick start guide © 2020 ADT. All rights reserved. Blue by ADT and other product /service names are marks and/or registered marks of their respective owners and used under license. Unauthorized use strictly prohibited. www.BluebyADT.com NOT APPROVED AS FINAL DO NOT PRODUCE Welcome to Blue by ADT You’ve made a great decision to help protect your family and home with the purchase of your Blue by ADT Keypad. The Blue Keypad is a convenient in-home controller for your security system. Use it to arm your system when you leave and to disarm your system when you come home. The keypad includes a Panic button to trigger the Panic Alarm in case of an emergency. It also connects to your Blue by ADT Smart Home Hub and sends you an alert if your smoke and/or CO detector alarms. The smoke/CO detector alarm requires the keypad to have AC power connected. Customize your keypad’s settings from the Blue by ADT app at any time. Box includes: • Keypad • 4 AAA batteries • Tabletop stand • Mounting hardware • Power supply Before you get started You will need: • Blue by ADT Smart Home Hub • Blue by ADT app on the latest iOS or Android OS • Phillips screwdriver or a drill with a Phillips driver bit (optional) • Power drill with drill bits for pilot holes (optional) Setting up your Blue by ADT Keypad Getting started is simple. Just follow these steps: 1. Remove the keypad and power supply from the box. 2. Remove the back cover of the keypad to access the battery slots and mounting holes. 3. Plug the power cord into the back of the keypad. Then, plug the keypad into an outlet for the best experience. Alternatively, use the device with batteries if you don’t have access to a power outlet nearby. a. Insert the batteries. Note: The keypad can run on AC power or batteries. If you are using AC power with inserted batteries, the batteries will act as a back-up power source. 4. Download the iOS or Android app by visiting www.BluebyADT.com/apps 5. Open the app to create an account or log in to your existing account. 6. Select Menu > Devices > (+) Add Security Device and select Blue Keypad. 7. Follow the in-app screens to pair your device to the Blue Smart Home Hub. 8. Set up the device in your desired location. Pairing To pair your Blue by ADT Keypad with the Blue Smart Home Hub, launch your Blue by ADT app. Once logged in, select Menu > Devices > (+) Add Security Device > Blue Keypad, and follow the in-app setup help to pair with your system. Note: The keypad and devices in a Blue by ADT system may be preconfigured. If so, they will be pre-paired to your system and can be added by simply powering the devices on. Mounting your Blue by ADT Keypad Note: The Blue by ADT Keypad should be located by an entrance in your home, like your front door or garage door. The keypad can either be mounted onto the wall or placed on a tabletop. 1. To mount the keypad on a wall: Secure the keypad to the wall by removing the back panel of the device and screwing the back panel into the wall using the included hardware. Once the back panel is mounted to the wall, press the keypad into place. Note: If you’re using the power cord, make sure the cord is attached to the keypad before connecting the device onto the back panel and plugging it into a power source. 2. To set up the keypad on a table: a. Remove the back panel of your keypad to plug the power cord into the device. Replace the back panel. b. Secure the table stand to the keypad by inserting the stand posts into the screw holes on the back panel of the keypad. Push the stand upward to lock it into place. Note: Make sure the stand is oriented as shown to ensure it is propped up correctly. Users & User Codes Blue by ADT allows for multiple User Codes, which will enable you to keep track of who arms and disarms your system. You can manage users and User Codes in the Blue by ADT app or web portal, not on the keypad. Log in, go to Menu > Users, and select User Name to view code details. • Master User Code: You will only have one 4-digit Master User Code, which gives you complete access to your entire system. Protect this code, and do not share it with others. • Users: Invite your trusted friends and family and keep track of who arms and disarms your system. Users will be invited via email, and they can set their login password, security question, and manage their notifications under My profile. As the Master User, you may invite any of the following user types to your system: 1. Admin Users get full access to all platforms and functionalities. 2. Standard Users have access to monitoring, controlling, and limited settings management. As the Master User, you may also add any of the following user types to your system: 1. Basic Users can only arm/disarm. 2. Duress User is a code to disarm the system and notify the monitoring center. You may only have one duress code, which is shared by all, to trigger a duress alert to the monitoring center if professionally monitored. Learn more about Users by visiting www.BluebyADT.com/support • Press 1 for police • Press 2 for fire • Press 3 for medical Press OFF to cancel a Panic Alarm siren locally on your keypad or smart home hub. Note: Once a Panic Alarm is triggered, you can’t cancel emergency services from being dispatched if you are monitored. Duress code: You can set up a unique code (different from your User Codes), which you can use when you feel threatened by someone forcing you to disarm from inside your home. When you enter this code, the alarm will not sound — but a special duress message is sent to the monitoring center, and emergency services will respond appropriately. • To create a duress code, select Menu > Users > (+) Add, and select Duress User. • Create a Duress User with a unique 4-digit duress code and then press Add User. Note: The Panic button and duress codes should only be used in an emergency. There is no option to cancel dispatch if you are not in an emergency. Your local municipality and police department will treat this…

Text truncated - open the document above for the full version.

Reference No.: 200210E09-1 Page 1 CONSTRUCTION PHOTOS OF EUT Reference No.: 200210E09-1 Page 2 Reference No.: 200210E09-1 Page 3 Reference No.: 200210E09-1 Page 4 Reference No.: 200210E09-1 Page 5 Adapter Reference No.: 200210E09-1 Page 6

LABEL LOCATION FCC ID: NKR-LS02 FCC Label Location Back of EUT

Reference No.: 200210E09-2 Page 1 CONSTRUCTION PHOTOS OF EUT Reference No.: 200210E09-2 Page 2 Reference No.: 200210E09-2 Page 3 Reference No.: 200210E09-2 Page 4 Reference No.: 200210E09-2 Page 5 Reference No.: 200210E09-2 Page 6 Reference No.: 200210E09-2 Page 7 Reference No.: 200210E09-2 Page 8 Reference No.: 200210E09-2 Page 9 Reference No.: 200210E09-2 Page 10 BLE antenna DECT antenna Reference No.: 200210E09-2 Page 11 Connect cable Reference No.: 200210E09-2 Page 12

Report No.: SA200210E09 Page No. 1 / 7 Report Format Version: 6.1.1 RF Exposure Report Report No.: SA200210E09 FCC ID: NKR-LS02 Test Model: SKP3R0-01 Received Date: Feb. 10, 2020 Test Date: Feb. 26, 2020 Issued Date: May 20, 2020 Applicant: Wistron NeWeb Corp. Address: 20 Park Avenue II, Hsinchu Science Park,Hsinchu 308, Taiwan, R.O.C. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan FCC Registration / Designation Number: 723255 / TW2022 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by any government agencies. Report No.: SA200210E09 Page No. 2 / 7 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Evaluation Result .................................................................................................................................. 5 3 SAR Test Exclusion Thresholds .......................................................................................................... 6 4 Conclusion ............................................................................................................................................ 7 Report No.: SA200210E09 Page No. 3 / 7 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued SA200210E09 Original release. May 20, 2020 Report No.: SA200210E09 Page No. 4 / 7 Report Format Version: 6.1.1 1 Certificate of Conformity Product: Keypad Brand: ADT Test Model: SKP3R0-01 Sample Status: ENGINEERING SAMPLE Applicant: Wistron NeWeb Corp. Test Date: Feb. 26, 2020 Standards: FCC Part 2 (Section 2.1093) IEEE C95.1-1992 References Test Guidance: KDB 447498 D01 General RF Exposure Guidance v06 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: May 20, 2020 Joyce Kuo / Specialist Approved by : , Date: May 20, 2020 Clark Lin / Technical Manager Report No.: SA200210E09 Page No. 5 / 7 Report Format Version: 6.1.1 2 Evaluation Result Following FCC KDB 447498 D01 “General SAR test exclusion guidance” The corresponding SAR Exclusion Threshold condition, listed below: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where  .  .  The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2) At 100 MHz to 6 GHz and for test separation distances > 50 mm, the SAR test exclusion threshold is determined according to the following: a) [Threshold at 50 mm in step 1) + (test separation distance - 50mm)·( f(MHz)/150)] mW, at 100MHz to 1500 MHz b) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·10] mW at > 1500 MHz and ≤ 6 GHz 3) At frequencies below 100 MHz, the following may be considered for SAR test exclusion. a) The threshold at the corresponding test separation distance at 100 MHz in step 2) is multiplied by [1 + log(100/f(MHz))] for test separation distances > 50 mm and < 200 mm. b) The threshold determined by the equation in a) for 50 mm and 100 MHz is multiplied by ½ for test separation distances ≤ 50 mm. c) SAR measurement procedures are not established below 100 MHz. When SAR test exclusion cannot be applied, a KDB inquiry is required to determine SAR evaluation requirements for any test results to be acceptable. Report No.: SA200210E09 Page No. 6 / 7 Report Format Version: 6.1.1 3 SAR Test Exclusion Thresholds BT-LE Avg. Power Table Channel Frequency (MHz) Average Power (mW) Average Power (dBm) 0 2402 1.122 0.50 19 2440 1.127 0.52 39 2480 1.132 0.54 For BT-LE SAR Test Exclusion Th…

Text truncated - open the document above for the full version.

Report No.: RF200210E09 Page No. 1 / 38 Report Format Version: 6.1.1 Reference No.: FCC Test Report (BT-LE) Report No.: RF200210E09 FCC ID: NKR-LS02 Test Model: SKP3R0-01 Received Date: Feb. 10, 2020 Test Date: Feb. 26 to Mar. 02, 2020 Issued Date: May 20, 2020 Applicant: Wistron NeWeb Corp. Address: 20 Park Avenue II, Hsinchu Science Park,Hsinchu 308, Taiwan, R.O.C. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan Test Location : E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan FCC Registration / Designation Number: 723255 / TW2022 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF200210E09 Page No. 2 / 38 Report Format Version: 6.1.1 Reference No.: Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT (BT-LE) ................................................................................................... 7 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 9 3.3 Duty Cycle of Test Signal .................................................................................................................. 10 3.4 Description of Support Units .............................................................................................................. 11 3.4.1 Configuration of System under Test ................................................................................................... 11 3.5 General Description of Applied Standards and References ............................................................. 12 4 Test Types and Results ...................................................................................................................... 13 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 13 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 13 4.1.2 Test Instruments ................................................................................................................................ 14 4.1.3 Test Procedures ................................................................................................................................. 15 4.1.4 Deviation from Test Standard ............................................................................................................ 15 4.1.5 Test Setup .......................................................................................................................................... 16 4.1.6 EUT Operating Conditions ................................................................................................................. 17 4.1.7 Test Results ....................................................................................................................................... 18 4.2 Conducted Emission Measurement .................................................................................................. 23 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 23 4.2.2 Test Instruments ................................................................................................................................ 23 4.2.3 Test Procedures ................................................................................................................................. 2…

Text truncated - open the document above for the full version.

Reference No.: 200109E07 Page No. 1 / 4 Reference No.: PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Reference No.: 200109E07 Page No. 2 / 4 Reference No.: RADIATED EMISSION TEST (Below 1GHz) Reference No.: 200109E07 Page No. 3 / 4 Reference No.: RADIATED EMISSION TEST (Above 1GHz) Reference No.: 200109E07 Page No. 4 / 4 Reference No.: