NKR-LS03Smart Home Hub

Product name ： Smart Home Hub Model name ： S40LR0-01 © 2020 ADT. All rights reserved. Blue by ADT and other product/service names are marks and/or registered marks of their respective owners and used under license. Unauthorized use strictly prohibited. www.BluebyADT.com y is Arming Cancel Cameras View Saved Med ia Motion Detected · ont Do, r Senso, blue by ADT Quick start guide Table of contents Setting up your system Welcome 4 Plan your setup 6 Setting up your hub 7 Home automation devices 16 Using your system Arming your system 17 What to do in the event of an alarm 19 User codes & keychains 20 Panic & duress 20 False alarm prevention 21 Alarm registration & permits 22 Customer help Base LED light quick reference guide 23 Troubleshooting 24 Warranty disclaimer 25 Welcome Welcome to Blue by ADT! You have made a great decision to help protect your family and home with the purchase of your new security system. Setting up the system is easy and does not require any tools. Registering your security system If purchased from ADT online or by phone: Your system and monitoring information has been pre-configured to make your setup even easier. To begin registration, go to login.BluebyADT.com on your browser or download the iOS or Android Blue by ADT app and log in with the username and password that was sent in your order confirmation email. After you are logged in, follow the instructions to verify your monitoring information and set up your system on Wi-Fi or Ethernet. If purchased from a retailer, such as Amazon, etc.: To get started, please visit www.BluebyADT.com/activate to activate your system with the activation code on the flyer you received in the device package. The activation code is a unique ID number used to associate your base to your account. You will only use this code once during the activation process. Note: During the activation process, it is important to set up professional monitoring so that your home is protected in the event of burglary and fire. Enrolling in professional monitoring ensures that you are contacted by the monitoring center and emergency authorities are dispatched. If you have any questions during setup, you can contact our Onboarding Specialists at 877-725-3838 or visit the Support Center at www.BluebyADT.com/support Master user code The master user code is used to arm and disarm your security system and is utilized during the setup process. This randomly generated code should be changed after the setup is completed. Master user code 4 Make sure to take advantage of your new system with our interactive app. You can access the web portal at login.BluebyADT.com or download the Blue by ADT app in the Google Play Store and iOS App Store through your device’s app store below: If you have any issues during setup, please feel free to visit our online Support Center at www.BluebyADT.com/support or call us at 877-725-3838. 5 Tip: Go beyond the alarm! Did you know that you can do more than just arm and disarm your system? You can easily set up alerts through the web portal and mobile app. Alerts give you peace of mind and keep you informed about what is happening inside your home. Blue by ADT also gives you the freedom to customize your system with the push of a button! Plan your setup Take a few moments to walk around your home and identify these key locations: 1. A central location within your home to place your base. 2. We recommend that you protect all first-floor doors and windows, and any windows on upper floors which an intruder could access. 3. Find a location for your entry keypad, preferably near your front door or the main entry point to your home that you use most often. This may be a side door or the door to your garage. 4. The motion sensor should be placed in an empty corner of the room, or on a shelf within the room, or near an entry point you would like to protect. 5. Find good locations for your indoor and/or outdoor camera(s) that provide unobstructed views of the areas you need to monitor. 6. Determine the locations of your smoke alarms and/or CO detectors. 6 Congratulations! You have completed planning your setup. Now start unpacking your home security system equipment. Setting up your hub Your hub is the most important piece in your home security system. The hub requires a Wi-Fi/internet connection. Please keep in mind that the base needs to be free from metal objects and appliances that generate heat. Avoid setting the hub directly on or near any major appliances, kitchen appliances, heaters, entertainment consoles, cable boxes, internet routers, televisions, and stereos. Once you have determined the ideal location for your hub, you may begin setup. 1. Open the box that says “Smart Home Hub”. 2. Unpack the contents and plug the power cord into the hub. Then plug the power cord into the closest power outlet. 3. While your hub is starting up, open up the Blue by ADT app on your mobile device and log in to your account. 4. Follow the in-app setup instructions to connect your Hub bottom base via Wi-Fi. 5. Once your hub powers on, it will begin to communicate with our security network. When the top LED light on your base is solid green or flashing yellow, you can proceed to the next step. Power Ethernet If the top LED on your base is not solid green or flashing yellow within 10 minutes, please contact Customer Support for additional assistance at 877-725-3838. 7 Setting up your hub 7 Hub top Home automation devices) Home automation devices Your system supports the use of Z-Wave lights, locks, thermostats, and garage door controllers. To learn more about how to add the devices to your system, control them, and what is supported, please visit www.BluebyADT.com/support and explore our Support Center articles. 8 Arming your system Blue by ADT provides a variety of options for arming and disarming your system. Depending on your needs, you may choose one of three different arming modes: ARM-STAY: Press the Stay button on top of the hub, then enter your …

Text truncated - open the document above for the full version.

Reference No.: 200225E06-1 Page 1 CONSTRUCTION PHOTOS OF EUT Reference No.: 200225E06-1 Page 2 Reference No.: 200225E06-1 Page 3 Reference No.: 200225E06-1 Page 4 Battery Reference No.: 200225E06-1 Page 5 Adapter Reference No.: 200225E06-1 Page 6

LABEL LOCATION FCC ID: NKR-LS03 FCC Label Location in battery chamber (bottom of EUT)

Reference No.: 200225E06-2 Page 1 CONSTRUCTION PHOTOS OF EUT Reference No.: 200225E06-2 Page 2 Reference No.: 200225E06-2 Page 3 Reference No.: 200225E06-2 Page 4 Reference No.: 200225E06-2 Page 5 Reference No.: 200225E06-2 Page 6 Reference No.: 200225E06-2 Page 7 Reference No.: 200225E06-2 Page 8 Reference No.: 200225E06-2 Page 9 Reference No.: 200225E06-2 Page 10 Reference No.: 200225E06-2 Page 11 Reference No.: 200225E06-2 Page 12 Reference No.: 200225E06-2 Page 13 Reference No.: 200225E06-2 Page 14 Reference No.: 200225E06-2 Page 15

Reference No.: 200225E06-2 Page 16 Reference No.: 200225E06-2 Page 17 Antenna - DECT 1 Reference No.: 200225E06-2 Page 18 Antenna - DECT 2 Antenna - BLE Reference No.: 200225E06-2 Page 19 Reference No.: 200225E06-2 Page 20 Antenna – LTE-1 Reference No.: 200225E06-2 Page 21 Antenna – WiFi 2.4G Chain 0 Reference No.: 200225E06-2 Page 22 Reference No.: 200225E06-2 Page 23 Antenna – WiFi 2.4G Chain 1 Reference No.: 200225E06-2 Page 24 Reference No.: 200225E06-2 Page 25 Antenna – Zigbee Reference No.: 200225E06-2 Page 26 Reference No.: 200225E06-2 Page 27 Antenna – Zwave

Report No.: SA200225E06 Page No. 1 / 8 Report Format Version: 6.1.1 Reference No.: 200204E11 RF Exposure Report Report No.: SA200225E06 FCC ID: NKR-LS03 Test Model: S40LR0-01 Received Date: Feb. 25, 2020 Test Date: Mar. 05, 2020 Issued Date: Apr. 15, 2020 Applicant: Wistron NeWeb Corp. Address: 20 Park Avenue II, Hsinchu Science Park,Hsinchu 308, Taiwan, R.O.C. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan FCC Registration / Designation Number: 723255 / TW2022 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by any government agencies. Report No.: SA200225E06 Page No. 2 / 8 Report Format Version: 6.1.1 Reference No.: 200204E11 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.1 MPE Calculation Formula ................................................................................................................... 5 2.2 Classification ....................................................................................................................................... 5 2.3 Antenna Gain ...................................................................................................................................... 6 2.4 Calculation Result of Maximum Conducted Power ............................................................................. 7 Appendix .......................................................................................................................................................... 8 Report No.: SA200225E06 Page No. 3 / 8 Report Format Version: 6.1.1 Reference No.: 200204E11 Release Control Record Issue No. Description Date Issued SA200225E06 Original release. Apr. 15, 2020 Report No.: SA200225E06 Page No. 4 / 8 Report Format Version: 6.1.1 Reference No.: 200204E11 1 Certificate of Conformity Product: Smart Home Hub Brand: ADT Test Model: S40LR0-01 Sample Status: ENGINEERING SAMPLE Applicant: Wistron NeWeb Corp. Test Date: Mar. 05, 2020 Standards: FCC Part 2 (Section 2.1091) IEEE C95.3-2002 References Test Guidance: KDB 447498 D01 General RF Exposure Guidance v06 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Apr. 15, 2020 Vivian Huang / Specialist Approved by : , Date: Apr. 15, 2020 Clark Lin / Technical Manager Report No.: SA200225E06 Page No. 5 / 8 Report Format Version: 6.1.1 Reference No.: 200204E11 2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f 2 )* 30 30-300 27.5 0.073 0.2 30 300-1500 ... ... f/1500 30 1500-100,000 ... ... 1.0 30 2 f = Frequency in MHz ; *Plane-wave equivalent power density 2.1 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.2 Classification The antenna of this product, under normal use condition, is at least 20 cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA200225E06 Page No. 6 / 8 Report Format Version: 6.1.1 Reference No.: 200204E11 2.3 Antenna Gain Antenna NO. Antenna Net Gain(dBi) Frequency range Antenna Type Connector Type WiFi 2.4GHz 6.07 2.4~2.4835GHz PCB i-pex(MHF) WiFi 2.4GHz 4.67 2.4~2.4835GHz PCB i-pex(MHF) BLE 5.38 2.4~2.4835GHz PCB i-pex(MHF) LTE_ANT1 0.87 2.38 2.25 698 ~ 716 MHz …

Text truncated - open the document above for the full version.

Report No.: RF200225E06-1 Page No. 1 / 40 Report Format Version: 6.1.1 Reference No.: FCC Test Report (BT-LE) Report No.: RF200225E06-1 FCC ID: NKR-LS03 Test Model: S40LR0-01 Received Date: Feb. 25, 2020 Test Date: Mar. 09 to 24, 2020 Issued Date: Apr. 15, 2020 Applicant: Wistron NeWeb Corp. Address: 20 Park Avenue II, Hsinchu Science Park,Hsinchu 308, Taiwan, R.O.C. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan Test Location : E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan FCC Registration / Designation Number: 723255 / TW2022 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF200225E06-1 Page No. 2 / 40 Report Format Version: 6.1.1 Reference No.: Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT (BT-LE) ................................................................................................... 7 3.2 Description of Test Modes ................................................................................................................... 9 3.2.1 Test Mode Applicability and Tested Channel Detail ........................................................................... 10 3.3 Duty Cycle of Test Signal ................................................................................................................... 11 3.4 Description of Support Units ............................................................................................................. 12 3.4.1 Configuration of System under Test .................................................................................................. 12 3.5 General Description of Applied Standards and References ............................................................. 13 4 Test Types and Results ...................................................................................................................... 14 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 14 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 14 4.1.2 Test Instruments ................................................................................................................................ 15 4.1.3 Test Procedures ................................................................................................................................. 18 4.1.4 Deviation from Test Standard ............................................................................................................ 19 4.1.5 Test Setup .......................................................................................................................................... 19 4.1.6 EUT Operating Conditions ................................................................................................................. 20 4.1.7 Test Results ....................................................................................................................................... 21 4.2 Conducted Emission Measurement .................................................................................................. 26 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 26 4.2.2 Test Instruments ................................................................................................................................ 26 4.2.3 Test Procedures ................................................................................................................................. 2…

Text truncated - open the document above for the full version.

Report No.: RF200225E06 Page No. 1 / 64 Report Format Version: 6.1.2 Reference No.: FCC Test Report (WLAN) Report No.: RF200225E06 FCC ID: NKR-LS03 Test Model: S40LR0-01 Received Date: Feb. 25, 2020 Test Date: Mar. 06 to 24, 2020 Issued Date: Apr. 15, 2020 Applicant: Wistron NeWeb Corp. Address: 20 Park Avenue II, Hsinchu Science Park,Hsinchu 308, Taiwan, R.O.C. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan FCC Registration / Designation Number: 723255 / TW2022 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF200225E06 Page No. 2 / 64 Report Format Version: 6.1.2 Reference No.: Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT (WLAN) .................................................................................................. 7 3.2 Description of Test Modes ................................................................................................................... 9 3.2.1 Test Mode Applicability and Tested Channel Detail ........................................................................... 10 3.3 Duty Cycle of Test Signal .................................................................................................................. 12 3.4 Description of Support Units ............................................................................................................. 13 3.4.1 Configuration of System under Test .................................................................................................. 13 3.5 General Description of Applied Standards and References ............................................................. 14 4 Test Types and Results ...................................................................................................................... 15 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 15 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 15 4.1.2 Test Instruments ................................................................................................................................ 16 4.1.3 Test Procedures ................................................................................................................................. 19 4.1.4 Deviation from Test Standard ............................................................................................................ 20 4.1.5 Test Setup .......................................................................................................................................... 20 4.1.6 EUT Operating Conditions ................................................................................................................. 21 4.1.7 Test Results ....................................................................................................................................... 22 4.2 Conducted Emission Measurement .................................................................................................. 36 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 36 4.2.2 Test Instruments ................................................................................................................................ 36 4.2.3 Test Procedures ................................................................................................................................. 37 4.2.4 Dev…

Text truncated - open the document above for the full version.

Report No.: RF200225E06-2 Page No. 1 / 45 Report Format Version: 6.1.1 Reference No.: FCC Test Report (Zigbee) Report No.: RF200225E06-2 FCC ID: NKR-LS03 Test Model: S40LR0-01 Received Date: Feb. 25, 2020 Test Date: Mar. 09 to 24, 2020 Issued Date: Apr. 15, 2020 Applicant: Wistron NeWeb Corp. Address: 20 Park Avenue II, Hsinchu Science Park,Hsinchu 308, Taiwan, R.O.C. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan FCC Registration / Designation Number: 723255 / TW2022 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF200225E06-2 Page No. 2 / 45 Report Format Version: 6.1.1 Reference No.: Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT (Zigbee) .................................................................................................. 7 3.2 Description of Test Modes ................................................................................................................... 9 3.2.1 Test Mode Applicability and Tested Channel Detail ........................................................................... 10 3.3 Duty Cycle of Test Signal .................................................................................................................. 12 3.4 Description of Support Units ............................................................................................................. 13 3.4.1 Configuration of System under Test .................................................................................................. 13 3.5 General Description of Applied Standards and references ............................................................... 14 4 Test Types and Results ...................................................................................................................... 15 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 15 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 15 4.1.2 Test Instruments .................................…

Text truncated - open the document above for the full version.