NKR-S705Bluetooth Module

DBUB-S705 Bluetooth Module User’s Manual This document provides safety instructions and describes the specifications. Read this document carefully before installing to ensure your safety and product performance. Federal Communication Commission (FCC) Interference Statement This device complies with Part 15B and 15C of FCC Rules and RSS-210 of IC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of this device. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Radiation Exposure Statement: Radiation Exposure Statement:Radiation Exposure Statement: Radiation Exposure Statement: The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Industry Canada statement: Industry Canada statement:Industry Canada statement: Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Radiation Exposure Statement: Radiation Exposure Statement:Radiation Exposure Statement: Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclarati DéclaratiDéclarati Déclaration d on don d on d' '' 'exposition aux radiations: exposition aux radiations:exposition aux radiations: exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Taiwan TaiwanTaiwan Taiwan statement statementstatement statement: :: : 第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、 加大功率或變更原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停 用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 Caution: Be aware of the following limits before using the Bluetooth Module .
Do not subject the Bluetooth Module to high temperatures, direct sunlight or moisture.
Do not bend, or subject the Bluetooth Module to strong impacts.
Do not disassemble or alter the Bluetooth Module in any way.
Do not attempt to install the Bluetooth Module in any incompatible device.
Do not remove the Bluetooth Module from the TV’s during operations.
Data transmitted and received over radio waves may be intercepted and monitored.
To avoid malfunctions caused by radio wave interface, keep the TV away from the devices such as other wireless devices, microwaves and the devices that use 2.4 GHz signals when using the Bluetooth Module.
Depending on the area, this Bluetooth Module may not be available. Setup the Bluetooth connection The Bluetooth Module is pre-installed in the TV set. No extra installation steps are required for users. Follow the steps below to start using the feature of this adapter: 1. Turn on your TV. 2. Switch to the channel that delivers 3D contents. If you are watching a disc with 3D contents, you will also need to activate your player for playing the disc. 3. Turn on your 3D glasses. 4. The 3D glasses will pair with this Bluetooth Module automatically and are now ready for use. Specification Power supply DC 3.3V 38.5mA Antenna Tx 1, Rx 1 Host Interface USB 2.0 + GPIO x1 Standard Compliance Bluetooth 3.0 Frequency Range 2.4 GHz (2.40GHz-2.4835GHz) Modulation ・GFSK ・Pi/4 QPSK ・8DPSK Receiver Sensitivity -88 dBm(typ.) GFSK, 0.1%BER -85 dBm(typ.) for pi/4-DQPSK, 0.01%BER Transfer rate (standard) * 3.0Mbps(MAX, Theoretical Value) Output Power Class 2, 0dBm typical, class 2 device (-6dBm < output power <4dBm). Antenna Type and Gain Metal Antenna with Peak Gain at 4.34dBi Security BT E0/AES/SAFER+ * Transfer rate are theoretical values; however, actual communication rate will vary according to communication environment or connected equipment. Specifications SpecificationsSpecifications Specifications

FCC ID: NKR-S705 Date: 2012-10-23 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, __________________________________ Troy Chien / Associate Technical Director Tel: +886-3-6667799 Fax: +886-3-6667323 E-mail:[email protected]

A G E N C Y A U T H O R I Z A T I O N L E T T E R FCC ID: NKR-S705 Date: 2012-10-23 To whom it may concern: We, the undersigned, hereby authorize Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf, as our agent, in the following matters related to the FCC approval of our products: report submittal, related correspondence, the signing of all documents relating to these matters, and any other lawful activity necessary to obtain such certification. Any act carried out by BV CPS Taoyuan within the scope of this authorization shall have the same effects as our own. This authorization shall expire 6 months from original date. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you. Sincerely, __________________________________ Troy Chien / Associate Technical Director Tel: +886-3-6667799 Fax: +886-3-6667323 E-mail:[email protected]

FCC ID: NKR-S705 Report No.: RF121016C06 Modular Approval Request Letter Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch November 9, 2012 Dear Application Examiner, Wistron NeWeb Corp., It’s a Bluetooth Module. FCC ID: NKR-S705 would like to have your authorization as a modular approval. The requirements of section 15.212 of FCC rules have been met and shown on the following statements. 1. “The modular transmitter must have its own RF shielding.” The radio portion of this module has been shielded, please see exhibition External Photo. 2. “The modular transmitter must have buffered modulation/data inputs.” The EUT has buffered data inputs, it is integrated in chip BCM20705. 3. “The modular transmitter must have its own power supply regulation.” The part number of this regulator is BCM20705. 4. “The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The spurious emission, unique antenna connector and photo of antennas are shown in the test report. 5. “The modular transmitter must be tested in a stand-alone configuration” The EUT was tested in a stand-alone configuration via a extender. Please see section Photographs of Test Configuration in the test report, the EUT was plugged in this extender. 6. “The modular transmitter must be labeled with its own FCC ID number.” Please see exhibition Label Sample for the FCC ID of this module. And also in the exhibition Users Manual, there are instructions give to the OEM on how to label the end product. FCC ID: NKR-S705 Report No.: RF121016C06 7. “The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements.” The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the Users Manual. 8. “The modular transmitter must comply with any applicable RF exposure requirements.” The EUT is compliant with all applicable RF exposure requirements. RF Exposure is addressed in the RF exposure exhibition. Please contact me if you have any further questions. Thanks for your attention. Best Regards, signature Robert Huang Senior Engineer Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch

Page 1 CONSTRUCTION PHOTOS OF EUT

Label location

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3

FCC ID: NKR-S705 Report No.: RF121016C06 Operational Description This device is a Bluetooth Module. The transmitter of the EUT is powered by 3.3Vdc from host devices. The antenna is Metal PIFA antenna without antenna connectors. For more detailed instruction, please take a look at the user’s manual.

Report No.: SA121016C06 1 of 5 Report Format Version 5.0.0 RF EXPOSURE REPORT REPORT NO.: SA121016C06 MODEL NO.: DBUB-S705 FCC ID: NKR-S705 RECEIVED: Oct. 16, 2012 TESTED: Oct. 19 ~ Oct. 20, 2012 ISSUED: Nov. 01, 2012 APPLICANT: Wistron NeWeb Corp. ADDRESS: 20 Park Avenue II, Hsinchu Science Park,Hsinchu 308, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: SA121016C06 2 of 5 Report Format Version 5.0.0 Table of Contents RELEASE CONTROL RECORD .............................................................................................................. 3 1. CERTIFICATION ........................................................................................................................... 4 2. REDUCED CONDITION FOR SAR .............................................................................................. 5 3. MAXIMUM MEASURED POWER OF EUT .................................................................................. 5 4. CONCLUSION .............................................................................................................................. 5 Report No.: SA121016C06 3 of 5 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA121016C06 Original release Nov. 01, 2012 Report No.: SA121016C06 4 of 5 Report Format Version 5.0.0 1. CERTIFICATION PRODUCT: Bluetooth Module MODEL NO.: DBUB-S705 BRAND: SHARP APPLICANT: Wistron NeWeb Corp. TESTED: Oct. 19 ~ Oct. 20, 2012 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1093) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (model: DBUB-S705) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE :Nov. 01, 2012 Maggie Wu / Specialist APPROVED BY: , DATE :Nov. 01, 2012 Ken Liu / Manager Report No.: SA121016C06 5 of 5 Report Format Version 5.0.0 2. REDUCED CONDITION FOR SAR When output power is ≤ 60/f(GHz) mW, SAR evaluation is not required. 3. MAXIMUM MEASURED POWER OF EUT Maximum measured transmitter power: Bluetooth Pout (dBm) Pout (mW) Conducted Power 4.76 2.99 EIRP Power 9.10 8.13 Note: The antenna type is Metal PIFA antenna with 4.34dBi gain. 4. CONCLUSION No SAR evaluation is required since output power of EUT is less than threshold of SAR.

Report No.: RF121016C06 1 of 47 Report Format Version 5.0.0 FCC TEST REPORT REPORT NO.: RF121016C06 MODEL NO.: DBUB-S705 FCC ID: NKR-S705 RECEIVED: Oct. 16, 2012 TESTED: Oct. 19 ~ Oct. 20, 2012 ISSUED: Oct. 31., 2012 APPLICANT: Wistron NeWeb Corp. ADDRESS: 20 Park Avenue II, Hsinchu Science Park,Hsinchu 308, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF121016C06 2 of 47 Report Format Version 5.0.0 Table of Contents RELEASE CONTROL RECORD .............................................................................................................. 4 1. CERTIFICATION ........................................................................................................................... 5 2. SUMMARY OF TEST RESULTS .................................................................................................. 6 2.1 MEASUREMENT UNCERTAINTY ................................................................................................ 6 3. GENERAL INFORMATION ........................................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ............................................................................................. 7 3.2 DESCRIPTION OF TEST MODES ............................................................................................... 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................................... 9 3.3 DESCRIPTION OF SUPPORT UNITS ....................................................................................... 11 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ........................................................................ 11 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................ 12 4. TEST TYPES AND RESULTS .................................................................................................... 13 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT .................................................... 13 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .................................. 13 4.1.2 TEST INSTRUMENTS ................................................................................................................ 14 4.1.3 TEST PROCEDURES ................................................................................................................ 15 4.1.4 DEVIATION FROM TEST STANDARD ...................................................................................... 15 4.1.5 TEST SETUP .............................................................................................................................. 16 4.1.6 EUT OPERATING CONDITIONS ............................................................................................... 16 4.1.7 TEST RESULTS ......................................................................................................................... 17 4.2 CONDUCTED EMISSION MEASUREMENT ............................................................................. 24 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT .......................................................... 24 4.2.2 TEST INSTRUMENTS ................................................................................................................ 24 4.2.3 TEST PROCEDURES ................................................................................................................ 25 4.2.4 DEVIATION FROM TEST STANDARD ...................................................................................... 25 4.2.5 TEST SETUP .............................................................................................................................. 26 4.2.6 EUT OPERATING CONDITIONS ............................................................................................... 26 4.2.7 TEST RESULTS ......................................................................................................................... 27 4.3 NUMBER OF HOPPING FREQUENCY USED .......................................................................... 29 4.3.1 LIMIT OF HOPPING FREQUENCY USED ................................................................................ 29 4.3.2 TEST SETUP ...............................................................................…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 3 4 RADIATED EMISSION TEST 5