NKR-XRAGP1Second Generation RFID Smart Reader

Second Generation RFID Smart Reader with Fan-out Box and RF Switch User Manual English Table of Contents Second Generation RFID Smart Reader 1 REGULATORY INFORMATION ......................................................................... 2 FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT ...................... 2 INDUSTRY CANADA STATEMENT: ........................................................................... 3 GETTING STARTED .......................................................................................... 5 IN THE PACKAGE ................................................................................................. 5 INTRODUCTION ................................................................................................... 6 HARDWARE OVERVIEW- RFID SMART READER ...................................................... 8 HARDWARE OVERVIEW- LED INDICATORS ........................................................... 10 HARDWARE OVERVIEW- FAN-OUT BOX ............................................................... 11 HARDWARE OVERVIEW - RF SWITCH .................................................................. 11 CONNECTING THE CABLES ................................................................................. 12 CONFIGURATION SOFTWARE ....................................................................... 15 ACCESS THE MANAGEMENT INTERFACE (WEB UI) ................................................ 15 MANAGEMENT: HOME ........................................................................................ 16 MANAGEMENT: ETHERNET ................................................................................. 17 LAN Settings .............................................................................................................................. 17 WAN Settings ............................................................................................................................ 18 MANAGEMENT: SYSTEM .................................................................................... 19 Firmware Upgrade .................................................................................................................... 19 User Account ............................................................................................................................ 20 Time Settings ............................................................................................................................ 21 System Log ................................................................................................................................ 22 LLRP Mode ................................................................................................................................ 23 Factory Reset & Reboot ............................................................................................................ 23 APPENDIX ........................................................................................................ 24 SPECIFICATIONS: RFID SMART READER ............................................................. 24 SPECIFICATIONS: FAN-OUT BOX ......................................................................... 26 SPECIFICATIONS: RF SWITCH ............................................................................ 27 PIN DEFINITION ................................................................................................. 28 2 Software Second Generation RFID Smart Reader 2 Regulatory Information Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 22 cm between the radiator & your body. 2 Software Second Generation RFID Smart Reader 3 Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produi…

Text truncated - open the document above for the full version.

20 Park Avenue II, Hsinchu Science Park,Hsinchu 308, Taiwan, R.O.C. July 2, 2013 FCC ID: NKR-XRAGP1 We, WISTRON NEWEB CORP. declare that the device does not support any non-US channels in all the operational mode(s) for the following product. If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you! ------------------------------------------------------- Troy Chien Associate Technical Director Tel: +886-3-6667799 Ext 6361 Fax: + 886-3-6667323 E-mail: [email protected]

20 Park Avenue II, Hsinchu Science Park,Hsinchu 308, Taiwan, R.O.C. July 2, 2013 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request FCC ID: NKR-XRAGP1 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematic Diagram Block Diagram Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, --------------------------------------------------------------- Troy Chien Associate Technical Director Tel: +886-3-6667799 Ext 6361 Fax: + 886-3-6667323 E-mail: [email protected]

20 Park Avenue II, Hsinchu Science Park,Hsinchu 308, Taiwan, R.O.C. July 2, 2013 Power of Attorney FCC ID: NKR-XRAGP1 To whom it may concern: We, the undersigned WISTRON NEWEB CORP. hereby authorize Bureau Veritas Consumer Products Services (H.K) Ltd., Taoyuan Branch. of Taiwan to act on our behalf in all matters relating to all processes required in the FCC Part 15C approval and any communication needed with the national authority. Any and all acts carried out by Bureau Veritas Consumer Products Services (H.K) Ltd., Taoyuan Branch. on our behalf shall have the same effects as acts of our own. This authorization shall expire six months from the original date. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, Troy Chien Associate Technical Director Tel: +886-3-6667799 Ext 6361 Fax: + 886-3-6667323 E-mail: [email protected]

Report No.: 130617E08 Page 1 CONSTRUCTION PHOTOS OF EUT Model : XRAG-P1 Report No.: 130617E08 Page 8 Model : XRAG-P2 Report No.: 130617E08 Page 15 Model : XRAG-P4 Report No.: 130617E08 Page 22 Adapter(Brand : CHANNEL WELL / Model : KPL-040F) Report No.: 130617E08 Page 23 Report No.: 130617E08 Page 24 Antenna(Brand : WNC / Model : XRAB-N1) Report No.: 130617E08 Page 25

FCC ID: NKR-XRAGP1 LABEL LOCATION Bottom of EUT FCC / IC Label Location

Report No.: 130617E08 Page 2 Model : XRAG-P1 Report No.: 130617E08 Page 3 Report No.: 130617E08 Page 4 Report No.: 130617E08 Page 5 Report No.: 130617E08 Page 6 Report No.: 130617E08 Page 7 Report No.: 130617E08 Page 9 Model : XRAG-P2 Report No.: 130617E08 Page 10 Report No.: 130617E08 Page 11 Report No.: 130617E08 Page 12 Report No.: 130617E08 Page 13 Report No.: 130617E08 Page 14 Report No.: 130617E08 Page 16 Model : XRAG-P4 Report No.: 130617E08 Page 17 Report No.: 130617E08 Page 18 Report No.: 130617E08 Page 19 Report No.: 130617E08 Page 20 Report No.: 130617E08 Page 21

Report No.: SA130617E08 1 of 6 Report Format Version 5.0.0 RF EXPOSURE REPORT REPORT NO.: SA130617E08 MODEL NO.: XRAG-P1, XRAG-P2, XRAG-P4 FCC ID: NKR-XRAGP1 RECEIVED: June 17, 2013 TESTED: June 26, 2013 ISSUED: July 09, 2013 APPLICANT: Wistron NeWeb Corp. ADDRESS: 20 Park Avenue II, Hsinchu Science Park,Hsinchu 308, Taiwan, R.O.C. ISSUED BY : Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: SA130617E08 2 of 6 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD .................................................................................... 3 1. CERTIFICATION ..................................................................................................... 4 2. RF EXPOSURE LIMIT ............................................................................................. 5 3. MPE CALCULATION FORMULA ............................................................................ 5 4. CLASSIFICATION ................................................................................................... 5 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER .......................... 6 Report No.: SA130617E08 3 of 6 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA130617E08 Original release July 09, 2013 Report No.: SA130617E08 4 of 6 Report Format Version 5.0.0 1.CERTIFICATION PRODUCT: Second Generation RFID Smart Reader BRAND NAME: WNC MODEL NO.: XRAG-P1, XRAG-P2, XRAG-P4 TEST SAMPLE: ENGINEERING SAMPLE APPLICANT: Wistron NeWeb Corp. TESTED: June 26, 2013 STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (Model: XRAG-P1) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: July 09, 2013 ( Midoli Peng, Specialist) APPROVED BY : , DATE: July 09, 2013 ( May Chen, Manager ) Report No.: SA130617E08 5 of 6 Report Format Version 5.0.0 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 22cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA130617E08 6 of 6 Report Format Version 5.0.0 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER FREQUENCY BAND (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 902.75 ~ 927.25 977.237 5.50 22 0.57009 0.6 Note: Limit of Power Density = F/1500 --- END --- Directional gain = gain of antenna element + 10 log (# of TX antenna elements) Effective Legacy Gain (dBi)=6.5 CONCLUSION: Both of the WLAN and Bluetooth can transmit simultaneously, the formula of calculated the MPE is: CPD 1 / LPD 1 + CPD 2 / LPD 2 + ......etc. < 1 CPD = Calculation power density LPD = Limit of power density Therefore, the worst-case situation is 0.085 / 1 + 0.006 / 1 = 0.091, which is less than “1”. This confirmed that the device comply with FCC 1.1310 MPE limit.

Report No.: RF130617E08 1 of 50 Report Format Version 5.2.0 Reference No.: 110819E02 FCC TEST REPORT REPORT NO.: RF130617E08 MODEL NO.: XRAG-P1, XRAG-P2, XRAG-P4 FCC ID: NKR-XRAGP1 RECEIVED: June 17, 2013 TESTED: June 26 to 28, 2013 TESTEFFD: July 09, 2013 APPLICANT: Wistron NeWeb Corp. ADDRESS: 20 Park Avenue II, Hsinchu Science Park,Hsinchu 308, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF130617E08 2 of 50 Report Format Version 5.2.0 Reference No.: 110819E02 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................ 4 1 CERTIFICATION ..................................................................................................... 5 2 SUMMARY OF TEST RESULTS.............................................................................. 6 2.1 MEASUREMENT UNCERTAINTY ........................................................................... 7 3 GENERAL INFORMATION ...................................................................................... 8 3.1 GENERAL DESCRIPTION OF EUT ........................................................................ 8 3.2 DESCRIPTION OF TEST MODES ........................................................................ 10 3.3 TEST MODE APPLICABLITY AND TESTED CHANNEL DETAIL: ......................... 11 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................ 13 3.5 DESCRIPTION OF SUPPORT UNITS ................................................................... 14 3.6 CONFIGURATION OF SYSTEM UNDER TEST .................................................... 15 4 TEST PROCEDURES AND RESULTS .................................................................. 18 4.1 CONDUCTED EMISSION MEASUREMENT ......................................................... 18 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ....................................... 18 4.1.2 TEST INSTRUMENTS ........................................................................................... 18 4.1.3 TEST PROCEDURES ........................................................................................... 19 4.1.4 DEVIATION FROM TEST STANDARD .................................................................. 19 4.1.5 TEST SETUP ........................................................................................................ 20 4.1.6 EUT OPERATING CONDITIONS........................................................................... 20 4.1.7 TEST RESULTS(MODE 1) .................................................................................... 21 4.1.8 TEST RESULTS(MODE 2) .................................................................................... 23 4.2 NUMBER OF HOPPING FREQUENCY USED ...................................................... 25 4.2.1 LIMIT OF HOPPING FREQUENCY USED ............................................................ 25 4.2.2 TEST INSTRUMENTS ........................................................................................... 25 4.2.3 TEST PROCEDURES ........................................................................................... 25 4.2.4 DEVIATION FROM TEST STANDARD .................................................................. 25 4.2.5 TEST SETUP ........................................................................................................ 26 4.2.6 TEST RESULTS .................................................................................................... 26 4.3 DWELL TIME ON EACH CHANNEL ...................................................................... 27 4.3.1 LIMIT OF DWELL TIME USED .............................................................................. 27 4.3.2 TEST INSTRUMENTS ........................................................................................... 27 4.3.3 TEST PROCEDURES ........................................................................................... 28 4.3.4 DEVIATION FROM TEST STANDARD .................................................................. 28 4.3.5 TEST SETUP ...............................................................................…

Text truncated - open the document above for the full version.

1 of 4 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST (POE mode) 2 of 4 CONDUCTED EMISSION TEST (Adapter mode) 3 of 4 RADIATED EMISSION TEST 4 of 4