NKRDRCMPart 15 Spread Spectrum Module (802.11 B/G)

WLAN 802.11 b/g Embedded Module User Manual (DRCM-81) Version: 1.0 Nov. 2005 1 Copyright Statement No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, whether electronic, mechanical, photocopying, recording or otherwise without the prior writing of the publisher. Windows ™ 98SE/2000/ME/XP are trademarks of Microsoft ® Corp. Pentium is trademark of Intel. All copyright reserved. 2 Contents FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT .3 FOR OEM INTEGRATORS..........................................................................................4 HARDWARE INSTALLATION & ANTENNA INFORMATION ...............................5 1. INTRODUCTION .....................................................................................................8 1.1 THE WLAN 802.11G...............................................................................................8 1.2 FEATURES................................................................................................................8 2. PLANNING YOUR WIRELESS NETWORK .........................................................9 2.1 WLAN .....................................................................................................................9 2.2 AD-HOC AND INFRASTRUCTURE.............................................................................9 3. SOFTWARE INSTALLATION AND UNINSTALLATION................................... 11 3.1 SETUP WIZARD INSTALLATION............................................................................. 11 3.2 ADDITIONAL SETUP PROCESSES............................................................................15 3.3 UNINSTALLATION...................................................................................................16 4. USING IEEE802.11G WLAN UTILITY ................................................................17 4.1 OVERVIEW.............................................................................................................17 4.2 ACCESSING THE CONFIGURATION UTILITY..........................................................17 4.3 L INK STAT US..........................................................................................................18 4.4 CONFIGURE PROFILE............................................................................................19 4.5 SITE SURVEY..........................................................................................................23 APPENDIX A: GLOSSARY .......................................................................................24 3 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Information To assure continued compliance, (example - use only shielded interface cables when connecting to computer or peripheral devices) any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 4 For OEM integrators This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as the 2 conditions above are met, further transmitter testing will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in devices where the antenna may be installed such that 20 cm may be maintained between the antenna and users (for example Notebook PC, access points, routers, wireless ASDL modems, and similar equipment)…

Text truncated - open the document above for the full version.

Wistron Neweb Corporation No. 10-1, Li-hsin Road 1, Science-based Industrial Park,Hsinchu 300, Taiwan, R. O. C. TEL: 886-3-666-7799 FAX: 886-3-666-1654 Date: Jun. 30th, 2006 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: Certification Applications FCC ID: NKRDRCM Model: DRCM-81 Dear Sir, We would like to declare that our product, Model: DRCM-81, FCC ID: NKRDRCM meets the requirements as a modular device which was indicated in FCC Public DA 00-1407, and to have your authorization as a modular approval. The statements are listed below: 1. “The modular transmitter must have its own RF shielding.” The radio portion of this module has been shielded, please refer to EUT photo. 2. “The modular transmitter must have buffered modulation/data inputs.” The EUT has buffered data inputs, it is integrated in chip Marvell 88W8385+88W8015 .(Please see the schematic file) 3. “The modular transmitter must have its own power supply regulation.” The modulator of the transmitter needs 3.3 V DC power supply for RF transmitting level. The CF interface provides 3.3V DC power supply, so there is a 1.5V/ 2.8V DC regulator on the module, and the part number of this regulator is AME8801LEEVZ/ AME8801CEEVZ. Please refer to EUT photo. 4. “The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(c).” The EUT meets the FCC antenna requirements. The spurious emission, unique antenna connector and photos of antennas are showed in the test report. 5. “The modular transmitter must be tested in a stand-alone configuration”. The EUT is tested in a stand-alone configuration via a PCMCIA extender board. The EUT is outside the notebook PC chassis using the extender board to extend the EUT outside the computer chassis. Please refer to EUT photo. 6. “The modular transmitter must be labeled with its own FCC ID number, and, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module.” Please refer to label samples listed below “Label NKRDRCM” & “Label Exterior”. And also in the OEM installation manual, there are labels and the instructions on how to label the end product. Wistron Neweb Corporation No. 10-1, Li-hsin Road 1, Science-based Industrial Park,Hsinchu 300, Taiwan, R. O. C. TEL: 886-3-666-7799 FAX: 886-3-666-1654 „ “Label NKRDRCM” „ “Label Exterior” Contains Transmitter Module DRCM-81 FCC ID: NKRDRCM 7. “The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirement.” The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the manual. 8. “The modular transmitter must comply with any applicable RF exposure requirements.” The EUT is compliant with the applicable RF exposure requirements. RF Exposure is addressed in the MPE test report. This request for modular approval is restricted to applications in mobile Host configurations only. Thanks for your help and do not hesitate to contact us if you have any further questions. Sincerely, ________________ Mr. Edward Yeh / Engineer Wistron NeWeb Corporation

Wistron Neweb Corporation No. 10-1, Li-hsin Road 1, Science-based Industrial Park,Hsinchu 300, Taiwan, R. O. C. 886-3-666-7799 886-3-666-1654 Rev 2 C:\tmp\06LR017 DRCM-81\AP FORM.doc 02/08/02 Letter Of Agency Date: Jun. 30, 2006 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: Please be advised that Wistron NeWeb Corporation authorizes International Standards Laboratory (ISL) to act on our behalf, until otherwise notified, for applications submitted to American Telecommunications Certification Body, Inc. (ATCB). We certify that we are not subject to denial of federal benefits that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C. 862. Further, no party as defined in 47 CFR 1.2002(b), for this application is subject to denial of federal benefits that includes FCC benefits. Thank you for your attention to this matter. ________________ Mr. Edward Yeh / Engineer Wistron NeWeb Corporation Wistron Neweb Corporation No. 10-1, Li-hsin Road 1, Science-based Industrial Park,Hsinchu 300, Taiwan, R. O. C. 886-3-666-7799 886-3-666-1654 Rev 2 C:\tmp\06LR017 DRCM-81\AP FORM.doc 02/08/02 Date: Jun. 30, 2006 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: Certification Application FCC ID: NKRDRCM Model: DRCM-81 We would like to apply for FCC Certification on the subject model (EUT). The EUT is a WLAN 802.11B/G CF MODULE. We have uploaded the related document for the EUT onto your website. Please review the information we submitted and issue us a grant for the subject model. If you have any comments, please do not hesitate to contact us. Thank you for your attention to these matters. Sincerely, ________________ Mr. Edward Yeh / Engineer Wistron NeWeb Corporation Wistron Neweb Corporation No. 10-1, Li-hsin Road 1, Science-based Industrial Park,Hsinchu 300, Taiwan, R. O. C. 886-3-666-7799 886-3-666-1654 Rev 2 C:\tmp\06LR017 DRCM-81\AP FORM.doc 02/08/02 FCC Labeling Requirements and Information Date: Jun. 30, 2006 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: Certification Application FCC ID: NKRDRCM Model: DRCM-81 The following label information is required by the FCC Rules and Regulations for certified devices. Please find marketing information required by the FCC Rules and Regulations as following: Label Requirements An intentional radiator device subject to certification by the FCC shall carry a warning label which includes the following statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. (Due to the space limitation, the statement is listed on page 3 of the users’ manual) The sample label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time of purchase. Sincerely, ________________ Mr. Edward Yeh / Engineer Wistron NeWeb Corporation FCC ID: NKRDRCM Wistron Neweb Corporation No. 10-1, Li-hsin Road 1, Science-based Industrial Park,Hsinchu 300, Taiwan, R. O. C. 886-3-666-7799 886-3-666-1654 Rev 2 C:\tmp\06LR017 DRCM-81\AP FORM.doc 02/08/02 Request for Confidentiality Date: Jun. 30, 2006 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: Certification Application FCC ID: NKRDRCM Model: DRCM-81 In regards the exhibits submitted in support of the application for FCC ID: NKRDRCM, please classify the following as confidential under the provision of 47 CFR 0.459: ‰ Block Diagram ‰ Schematics ‰ Technical Spec The application contains technical information which Wistron NeWeb Corporation deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Sincerely, ________________ Mr. Edward Yeh / Engineer Wistron NeWeb Corporation

External photo

Label Location Warning statement Label

International Standards Laboratory Report Number: ISL-06LR017P HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067 LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1 Appendix Photographs of EUT of Product Name WLAN 802.11B/G CF MODULE Model DRCM-81 International Standards Laboratory Report Number: ISL-06LR017P HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067 LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1 -1- EUT-1. International Standards Laboratory Report Number: ISL-06LR017P HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067 LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1 -2- EUT-2. International Standards Laboratory Report Number: ISL-06LR017P HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067 LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1 -3- EUT-3. International Standards Laboratory Report Number: ISL-06LR017P HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067 LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1 -4- EUT-4.

Report Number: ISL-06LR017MPE Issue Date:2006/06/30 HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067 LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1 ISL-T10-R2-3 MPE Test Report of Product Name WLAN 802.11B/G CF MODULE Model DRCM-81 Applied by: Wistron Neweb Corporation No. 10-1, Li-hsin Road 1,, Science-based Industrial0 Taiwan, R. O. C.. Test Performed by: International Standards Laboratory No. 120, Lane 180, San Ho Tsuen, Hsin Ho Rd. Lung-Tan Hsiang, Tao Yuan County 325 Taiwan, R.O.C. Tel:(03)407-1718 Fax:(03)407-1738 International Standards Laboratory Report Number: 06LR017MPE HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067 LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1 Contents of Report 1. General...................................................................................................... 1 1.1 Certification of Accuracy of Test Data ...................................................................... 1 2. Description of Equipment Under Test (EUT).................................. 2 2.1 General Test Conditions ............................................................................................ 3 3. RF Exposure Measurement [Section 15.247(b)(4) & 1.1307(b)] .............. 4 3.1 Applied Standards ...................................................................................................... 4 3.2 Test Procedure ........................................................................................................... 4 3.3 Test Setup................................................................................................................... 4 3.4 Calculation for Maximum Permissible Exposure (MPE) .......................................... 4 4. Appendix : Test Equipment ........................................................................ 6 4.1 Test Equipment List ................................................................................................... 6 FCC ID:NKRDRCM International Standards Laboratory Report Number: 06LR017MPE HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067 LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1 -1- 1. General 1.1 Certification of Accuracy of Test Data Standards: CFR 47 Part 15 Subpart B Class B CFR 47 Part 15 Subpart C (Section 15.247) Test Procedure: ANSI C63.4:2003 Equipment Tested: WLAN 802.11B/G CF MODULE Model: DRCM-81 Applied by: Wistron Neweb Corporation Sample received Date: 2006/06/28 Final test Date : 2006/06/27-2006/06/29 Test Result PASS Test Site: Chamber 02, Conduction 02 Temperature Refer to each site test data Humidity: Refer to each site test data Test Engineer: ______________________ Jerry Chiou All the tests in this report have been performed and recorded in accordance with the standards described above and performed by an independent electromagnetic compatibility consultant, International Standards Laboratory. The test results contained in this report accurately represent the measurements of the characteristics and the energy generated by sample equipment under test at the time of the test. The sample equipment tested as described in this report is in compliance with the limits of above standards. Approve & Signature --------------------------------------- Eddy Hsiung/Director Test results given in this report apply only to the specific sample(s) tested under stated test conditions. This report shall not be reproduced other than in full without the explicit written consent of ISL. This report totally contains 8 pages, including 1 cover page , 1 contents page, and 6 pages for the test description. This report must not be use to claim product endorsement by NVLAP or any agency of the U.S. Government. This test data shown below is traceable to NIST or national or international standard. International Standards Laboratory certifies that no party to this application has been denied the FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). FCC ID:NKRDRCM International Standards Laboratory Report Number: 06LR017MPE HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067 LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1 -2- 2. Description of Equipment Under Test (EUT) Description: WLAN 802.11B/G CF MODULE Model No.: DRCM-81 Frequency Range 802.11b/g: 2400~2483.5 MHz Support channel: 802.11b/g 11 Channels Modulation Skill: 802.11b DBPSK(1Mbps), DQPSK(2Mbps), CCK(5.5/11Mbps) 802.11g OFDM (6M - 54Mbps) Antennas Type: Antenna 1: Dipole (F1B-204406-52, made by Long-Chu Co.) Antenna 2: Dipole (C478-510028-A, made by Wha Yu Co.) Antenna Connected: The antenna is connected to the RF connector of the WLAN adapter. Antenna peak Gain: Antenna 1: 1.82 dBi (11b/g) Antenna 2: 2.5 dBi (11b/g) WLAN Power Type : 3.3V DC from the EUT The channel and the operation frequency of 802.11b and 802.11g is listed below: Channel Frequency(MHz) Channel Frequency(MHz) 01 2412 07 2442 02 2417 08 2447 03 2422 09 2452 04 2427 10 2457 05 2432 11 2462 06 2437 During the test, the EUT was tested as a modular device of a notebook PC using a PCMCIA extender board to extend the EUT outside the notebook PC enclosure. There are two Dipole antennas in the EUT: All of antennas have been tested. The worse data of each antenna type are shown. Configuration list as below: DRCM-81 PIFA Antenna 802.11b/g Antenna 2 FCC ID:NKRDRCM International Standards Laboratory Report Number: 06LR017MPE HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067 LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-…

Text truncated - open the document above for the full version.

Specification 1. Electrical Properties : 1.1 Frequency Range........... 1.2 Impedance .................. 1.3 VSWR ....................... 1.4 Return Loss.................. 1.5 Electrical Wave............. 1.6 Gain(peak)................... 2.5dBi @ 2.4GHz~2.5GHz 5dBi @ 5.15GHz~5.825GHz 2. Physical Properties : 2.1 Cable......................... RG-178 Coaxial Cable 2.2 Antenna Cover............ ...ABS+PC 2.3 Antenna Base...............ABS+PC 2.4 Antenna Base............... PBT 2.5 Operating Temp. ........... -20°C ~ +55°C 2.6 Storage Temp. .............. -30°C ~ +60°C 2.7 Color ........................ .Black 2.8 Connector.................. ...SMA Plug Reverse RF Antenna Cable Assembly 1/2λDiople 2.4GHz ~ 2.5GHz ；5.15GHz ~ 5.825GHz 50Ω Nominal 1.92 Max. -10 dB Maximum 1 RF Antenna Assembly P/NO :C478-510028-A SPEC : Dual Band 3 3/8/2005 0 345 330 315 300 285 270 255 240 225 210 195 180 165 150 135 120 105 90 75 60 45 30 15 -20-100 dB Far-field amplitude of C478-510028-A-V.nsi 2.400000 GHz2.450000 GHz2.500000 GHz 4 3/8/2005 0 345 330 315 300 285 270 255 240 225 210 195 180 165 150 135 120 105 90 75 60 45 30 15 -20-100 dB Far-field amplitude of C478-510028-A-H.nsi 2.400000 GHz2.450000 GHz2.500000 GHz 5 3/8/2005 0 345 330 315 300 285 270 255 240 225 210 195 180 165 150 135 120 105 90 75 60 45 30 15 -20-100 dB Far-field amplitude of C478-510028-A-V.nsi 5.150000 GHz5.250000 GHz5.350000 GHz 5.725000 GHz5.825000 GHz 6 3/8/2005 0 345 330 315 300 285 270 255 240 225 210 195 180 165 150 135 120 105 90 75 60 45 30 15 -20-100 dB Far-field amplitude of C478-510028-A-H.nsi 5.150000 GHz5.250000 GHz5.350000 GHz 5.725000 GHz5.825000 GHz 7 8 9 10 11 12 SGS Test Report Product：RF Antenna Contents No Description Report No. Page 1 Cable RG-178 Cable CE/2004/C1640 P.14~16 2 Antenna Housing Upper Base PC+ABS CE/2005/41836 P.17~20 3 Bottom Base PBT CE/2005/30689A111P.21~23 4 Rivet POM 11CE/2005/5070011111P.24~27 5 Connector SMA Plug Reverse GZSCR041250485/LP P.28 Result for RoHS：PASS 13 14 15 16 The content of this PDF file is in accordance with the original issued reports for reference only. This Test Report cannot be reproduced, except in full, without prior written permission of the Company SGS TAIWAN LIMITED NO. 136-1, Wu Kung Road, WuKu Industrial Zone, Taipei county, Taiwan. t(886-2) 22993939 f(886-2) 2299-3237 www.sgs.com.tw Test Report Report No. : CE/2005/41836 Date : 2005/04/18 Page : 1 of 4 Type of Product : Style/Item No : Sample Received : Testing Date : =========================================================================== = Test Result : - Please see the next page - 2005/04/11 2005/04/11 TO 2005/04/18 JIN CHI PLASTIC MATERIALS CO., LTD. 2F, NO. 161. JHONG SHAN RD., LUJHU TOWNSHIP, TAOYAN COUNTRY 338, TAIWAN The following merchandise was (were) submitted and identified by the client as : POLYCARBONATE / ACRYLONITRILE BUTADIENE STYRENE BAYER PC / ABS FR 2010 17 The content of this PDF file is in accordance with the original issued reports for reference only. This Test Report cannot be reproduced, except in full, without prior written permission of the Company SGS TAIWAN LIMITED NO. 136-1, Wu Kung Road, WuKu Industrial Zone, Taipei county, Taiwan. t(886-2) 22993939 f(886-2) 2299-3237 www.sgs.com.tw Test Report Report No. : CE/2005/41836 Date : 2005/04/18 Page : 2 of 4 Test Result PART NAME NO.1: Result No.1 Monobromobiphenyl%0.0005N.D. Dibromobiphenyl%0.0005N.D. Tribromobiphenyl%0.0005N.D. Tetrabromobiphenyl%0.0005N.D. Pentabromobiphenyl%0.0005N.D. Hexabromobiphenyl%0.0005N.D. Heptabromobiphenyl%0.0005N.D. Octabromobiphenyl%0.0005N.D. Nonabromobiphenyl%0.0005N.D. Decabromobiphenyl%0.0005N.D. Total PBBs(Polybrominated bi phenyls)/Sum of above %-N.D. Monobromobiphenyl ether%0.0005N.D. Dibromobiphenyl ether%0.0005N.D. Tribromobiphenyl ether%0.0005N.D. Tetrabromobiphenyl ether%0.0005N.D. Pentabromobiphenyl ether%0.0005N.D. Hexabromobiphenyl ether%0.0005N.D. Heptabromobiphenyl ether%0.0005N.D. Octabromobiphenyl ether%0.0005N.D. Nonabromobiphenyl ether%0.0005N.D. Decabromobiphenyl ether%0.0005N.D. Total PBBEs(PBDEs)(Polybromin ated biphenyl ethers)/Sum of above %-N.D. MethodMDLUnit With reference to USEPA3540C or USEPA3550C. Analysis was performed by HPLC/DAD, LC/MS or GC/MS. (prohibited by 2002/95/EC (RoHS), 83/264/EEC, and 76/769/EEC) BLACK PLASTIC PELLETS (PLEASE REFER TO THE PHOTO ATTACHED) JIN CHI PLASTIC MATERIALS CO., LTD. 2F, NO. 161. JHONG SHAN RD., LUJHU TOWNSHIP, TAOYAN COUNTRY 338, TAIWAN Test Item (s): With reference to USEPA3540C or USEPA3550C. Analysis was performed by HPLC/DAD, LC/MS or GC/MS. (prohibited by 2002/95/EC (RoHS), 83/264/EEC, and 76/769/EEC) 18 The content of this PDF file is in accordance with the original issued reports for reference only. This Test Report cannot be reproduced, except in full, without prior written permission of the Company SGS TAIWAN LIMITED NO. 136-1, Wu Kung Road, WuKu Industrial Zone, Taipei county, Taiwan. t(886-2) 22993939 f(886-2) 2299-3237 www.sgs.com.tw Test Report Report No. : CE/2005/41836 Date : 2005/04/18 Page : 3 of 4 Result No.1 Chromium VI (Cr+6)ppm UV-VIS after reference to US EPA 3060A. 2N.D. Cadmium (Cd)ppm ICP-AES after reference to EN 1122, method B:2001 or other acid digestion. 2N.D. Mercury (Hg)ppm ICP-AES after reference to US EPA 3052 or other acid digestion. 2N.D. Lead (Pb)ppm ICP-AES after reference to US EPA 3050B or other acid digestion. 2N.D. JIN CHI PLASTIC MATERIALS CO., LTD. 2F, NO. 161. JHONG SHAN RD., LUJHU TOWNSHIP, TAOYAN COUNTRY 338, TAIWAN Test Item (s):MDLMethodUnit NOTE (1) N.D. = Not detected (<MDL) (2) ppm = mg/kg (3) MDL = Method Detection Limit (4) " --- " = Not Applicable (5) " - " = No Regulation 19 The content of this PDF file is in accordance with the original issued reports for reference only. This Test Report cannot be reproduced, except in full, without prior written permission of the Company SGS TAIWAN LIMITED NO. 136-1, Wu Kung Road, WuKu Industrial Zone, Taipei county, Taiwan. t(886-2) 22993939 f(886…

Text truncated - open the document above for the full version.

Report Number: ISL-06LR017FC Issue Date: 2006/06/30 HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067 LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1 ISL-T10-R2-3 Test Report for FCC Part 15 Subpart B & C of Product Name WLAN 802.11B/G CF MODULE Model DRCM-81 Applied by: Wistron Neweb Corporation No. 10-1, Li-hsin Road 1, Science-based Industrial Park, Hsinchu 300, Taiwan, R. O. C. Test Performed by: International Standards Laboratory No. 120, Lane 180, San Ho Tsuen, Hsin Ho Rd. Lung-Tan Hsiang, Tao Yuan County 325 Taiwan, R.O.C. Tel:(03)407-1718 Fax:(03)407-1738 FCC ID:NKRDRCM International Standards Laboratory Report Number: 06LR017FC HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067 LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1 -i- Contents of Report 1. General........................................................................................................ 1 1.1 Certification of Accuracy of Test Data ........................................................................ 1 2. Test Results Summary............................................................................ 2 3. Description of Equipment Under Test (EUT)................................... 3 4. TEST RESULTS (802.11b)............................................................. 4 4.1 Powerline Conducted Emissions [Section 15.207] ...................................................... 4 4.1.1 EUT Configuration................................................................................................................. 4 4.1.2 Test Procedure.......................................................................................................................... 4 4.1.3 EMI Receiver/Spectrum Analyzer Configuration (for the frequencies tested).4 4.1.4 Test Data:.................................................................................................................................... 5 4.2 Bandwidth for DSSS [Section 15.247 (a)(2)]............................................................... 7 4.2.1 Test Procedure.......................................................................................................................... 7 4.2.2 Test Setup................................................................................................................................... 7 4.2.3 Test Data:.................................................................................................................................... 7 4.3 DSSS Maximum Peak Output Power [Section 15.247 (b)(1)] ................................... 10 4.3.1 Test Procedure.........................................................................................…

Text truncated - open the document above for the full version.