O2R-226MSWi-Fi Module

ReZolt RZ226MS Module Regulatory Certification Note 1 RZEMFIAN-007-20140121 ReZolt ® AN-007 ReZolt ® RZ226MS Module Regulatory Certification User Guide ReZolt Confidential Revision 0.1 January 21, 2014 ReZolt RZ226MS Module Regulatory Certification Note 2 RZEMFIAN-007-20140121 ReZolt reserves the right to make corrections, modifications, enhancements, improvements, and other changes to its products and platforms at any time and to discontinue any product or platform without notice. ReZolt assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using ReZolt products. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. ReZolt does not warrant or represent that any license, either express or implied, is granted under any ReZolt patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which ReZolt products or platforms are used. Information that ReZolt publishes regarding third-party products or services does not constitute a license from ReZolt to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from ReZolt under the patents or other intellectual property of ReZolt. ReZolt assumes no liability whatsoever, and provides no warranty, express or implied, relating to the sale or license of ReZolt products and platforms or engineering services provided by ReZolt. ReZolt products and platforms are not authorized for use in safety-critical applications (such as medical, life-saving or life-sustaining applications) where a failure of the ReZolt product would reasonably be expected to cause severe personal injury or death. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products. ReZolt may make changes to the product specifications and descriptions at any time without notice. ReZolt Confidential Revision 0.1 January 21, 2014 ReZolt RZ226MS Module Regulatory Certification Note 3 RZEMFIAN-007-20140121 Table of Contents 1. Introduction ........................................................................................................................................ 4 1.1. Intended Audience and Reading Suggestions ........................................................................ 4 1.2. Scope of the Document .............................................................................................................. 4 2. Module Description ........................................................................................................................... 5 3. Eligibility Requirements on Regulatory Certification ................................................................... 6 4. Users Manual Requirements ............................................................................................................ 7 4.1 United States Requirements ..................................................................................................... 7 5. United States Regulatory Approval ................................................................................................. 8 5.1 Design Requirements ................................................................................................................ 8 5.2 Unintentional Radiation Testing ............................................................................................. 8 5.3 Co-Location of Additional Transmitters ................................................................................. 8 5.4 Product Labeling Requirements .............................................................................................. 9 6. Industry Canada Regulatory Approval .......................................................................................... 10 6.1 Design Requirements .............................................................................................................. 10 6.2 Unintentional Radiation Testing ........................................................................................... 10 6.3 Product Labeling Requirements ............................................................................................ 10 6.4 RF Exposure .............................................................................................................................. 11 Revision History ....................................................................................................................................... 12 ReZolt RZ226MS Module Regulatory Certification Note 4 RZEMFIAN-007-20140121 1. Introduction ReZolt provides embedded Wi-Fi (Em-Fi TM ) moduleRZ226MS, to enable low-power Wi-Fi communication on deeply embedded devices. The ReZolt Em-Fi modules transmit and receive radio signals in accordance with the spectrum regulations for the 2.4 Ghz unlicensed ISM band. Regional regulatory agency approval may be required to operate these modules throughout the world. This document describes regulatory certifications applicable to ReZolt Em-Fi modules, as well as regulatory certification requirements on end-products that integrate these modules. 1.1. Intended Audience and Reading Suggestions This document is intended for customers of ReZolt Em-Fi modules. 1.2. Scope of the Document This document provides general information involved with Regulatory Certification when installing and operating ReZolt Em-Fi modules. ReZolt RZ226MS Module Regulatory Certification Note 5 RZEMFIAN-007-20140121 2. Module Description ReZolt provides several Embedded Wi-Fi modules, including RZ226M…

Text truncated - open the document above for the full version.

Rezolt Corporation FCC ID: O2R-226MS; IC: 10363A-226MS Report Number: R1304094-247 Page 77 of 79 FCC Part 15C/IC RSS-210 Test Report 16 Exhibit C – EUT Photographs 16.1 EUT Front View 16.2 EUT Back View Rezolt Corporation FCC ID: O2R-226MS; IC: 10363A-226MS Report Number: R1304094-247 Page 78 of 79 FCC Part 15C/IC RSS-210 Test Report 16.3 EUT on the Support Board 1 View 16.4 Support Board 2 View

Rezolt Corporation FCC ID: O2R-226MS; IC: 10363A-226MS Report Number: R1304094-247 Page 72 of 79 FCC Part 15C/IC RSS-210 Test Report 14 Exhibit A – FCC & IC Equipment Labeling Requirements 14.1 FCC ID Label Requirements As per FCC §2.925, (a) Each equipment covered in an application for equipment authorization shall bear a nameplate or label listing the following: (1) FCC Identifier consisting of the two elements in the exact order specified in §2.926. The FCC Identifier shall be preceded by the term FCC ID in capital letters on a single line, and shall be of a type size large enough to be legible without the aid of magnification. Example: FCC ID: XXX123 Where: XXX—Grantee Code, 123—Equipment Product Code As per FCC §15.19, (a) In addition to the requirements in part 2 of this chapter, a device subject to certification, or verification shall be labeled as follows: (3) All other devices shall bear the following statement in a conspicuous location on the device: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. (4) Where a device is constructed in two or more sections connected by wires and marketed together, the statement specified above is required to be affixed only to the main control unit. If the EUT is integrated within another device then a label affixed to the host shall also state, “Contains FCC ID: XXXXXX” (5) When the device is so small or for such use that it is not practicable to place the statement specified under paragraph (a) of this section on it, the information required by this paragraph shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. However, the FCC identifier or the unique identifier, as appropriate, must be displayed on the device. 14.2 IC Label Requirements As per IC RSS-Gen §5.2, the certification number shall appear as follows: IC: XXXXXX-YYYYYYYY Where:  "XXXXXX-YYYYYYYY" is the certification number  "XXXXXX" is the Certificate Holder Number (CHN), made of at most 6 alphanumeric characters (A-Z, 0-9), assigned by Industry Canada; and  "YYYYYYYY" is the Unique Product Number (UPN), made of at most 11 alphanumeric characters (A-Z, 0-9) assigned by the applicant.  Note 1: The term "IC" before the equipment certification number only signifies that the Industry Canada technical specifications were met.  Note 2: Note 1 shall be conspicuously placed in the equipment user manual.  Note 3: Permitted alphanumeric characters used in the CHN and UPN are limited to capital letters (A-Z) and digits (0-9). Other characters, such as "#", "/" or "-", shall not be used. Rezolt Corporation FCC ID: O2R-226MS; IC: 10363A-226MS Report Number: R1304094-247 Page 73 of 79 FCC Part 15C/IC RSS-210 Test Report As per RSS-Gen §5.2 Equipment Labeling: Equipment subject to certification under the applicable RSS, shall be permanently labeled on each item, or as an inseparable combination. The label must contain the following information for full compliance: (a) the certification number, prefixed by the term “IC:”; (b) the manufacturer's name, trade name or brand name; and (c) a model name or number. Equipment for which a certificate has been issued is not considered certified if it is not properly labeled. The information on the Canadian label can be combined with the manufacturer’s other labeling requirements. If the device size is too small to put a label, the label can be included in the user’s manual, upon agreement with Industry Canada. 14.3 FCC ID & IC Label Contents and Location

Rezolt Corporation FCC ID: O2R-226MS; IC: 10363A-226MS Report Number: R1304094-247 Page 79 of 79 FCC Part 15C/IC RSS-210 Test Report 16.5 EUT Shielding off View --- END OF REPORT ---

Rezolt Corporation FCC ID: O2R-226MS; IC: 10363A-226MS Report Number: R1304094-247 Page 10 of 79 FCC Part 15C/IC RSS-210 Test Report 4 FCC §15.247 (i), §2.1091 & IC RSS-102 – RF Exposure 4.1 Applicable Standard According to FCC §15.247(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minutes) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 * (100) 30 1.34-30 824/f 2.19/f * (180/f 2 ) 30 30-300 27.5 0.073 0.2 30 300-1500 / / f/1500 30 1500-100,000 / / 1.0 30 f = frequency in MHz * = Plane-wave equivalent power density Before equipment certification is granted, the procedure of IC RSS-102 must be followed concerning the exposure of humans to RF fields. According to IC RSS-102 Issue 2 section 4.1, RF limits used for general public will be applied to the EUT. Frequency Range (MHz) Electric Field (V/m rms) Magnetic Field (A/m rms) Power Density (W/m 2 ) Time Averaging (min) 0.003 - 1 280 2.19 - 6 1 - 10 280 / f 2.19 / f - 6 10 - 30 28 2.19 / f - 6 30 – 300 28 0.073 2* 6 300 – 1 500 1.585 f 0.5 0.0042 f 0.5 f / 150 6 1 500 – 15 000 61.4 0.163 10 6 15 000 – 150 000 61.4 0.163 10 616000 / f 1.2 150 000- 300 000 0.158 f 0.5 4.21 x 10 -4 f 0.5 6.67 x 10 -5 f 616000 / f 1.2 Note: ƒ is frequency in MHz * = Power density limit is applicable at frequencies greater than 100 MHz Rezolt Corporation FCC ID: O2R-226MS; IC: 10363A-226MS Report Number: R1304094-247 Page 11 of 79 FCC Part 15C/IC RSS-210 Test Report 4.2 MPE Prediction Predication of MPE limit at a given distance, Equation from OET Bulletin 65, Edition 97-01 S = PG/4R² Where: S = power density P = power input to antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna 4.3 MPE Results Maximum peak output power at antenna input terminal (dBm): 17.39 Maximum peak output power at antenna input terminal (mW): 54.828 Prediction distance (cm): 20 Prediction frequency (MHz): 2462 Maximum Antenna Gain, typical (dBi): 0 Maximum Antenna Gain (numeric): 1 Power density of prediction frequency at 20.0 cm (mW/cm 2 ): 0.0109 Power density of prediction frequency at 20.0 cm (W/m 2 ): 0.109 MPE limit for uncontrolled exposure at prediction frequency (mW/cm 2 ): 1.0 MPE limit for uncontrolled exposure at prediction frequency (W/m 2 ): 10 The device is compliant with the requirement MPE limit for uncontrolled exposure. The maximum power density at the distance of 20 cm is 0.011 mW/cm 2 (0.11W/m 2 ). Limit is1 mW/cm 2 (10W/m 2 ).

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA*, NIST, or any agency of the Federal Government. * This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “*” (Rev.2) FCC PART 15, SUBPART C IC RSS-210, ISSUE 8, DECEMBER 2010 TEST AND MEASUREMENT REPORT For Rezolt Corporation 1248 Reamwood Avenue, Sunnyvale, CA 94089, USA Report Type: Original Report Product Type: 802.11 b/g/n Module Prepared By: Jeffrey Wu Report Number: R1304094 Report Date: 2014-01-23 Reviewed By: Hans Mellberg Chief Technical Officer Bay Area Compliance Laboratories Corp. 1274 Anvilwood Avenue, Sunnyvale, CA 94089, USA Tel: (408) 732-9162 Fax: (408) 732-9164 FCC ID: O2R-226MS IC: 10363A-226MS Rezolt Corporation FCC ID: O2R-226MS; IC: 10363A-226MS Report Number: R1304094-247 Page 2 of 79 FCC Part 15C/IC RSS-210 Test Report TABLE OF CONTENTS 1 General Description ..................................................................................................................................................... 5 1.1 Product Description for Equipment Under Test (EUT) ...................................................................................... 5 1.2 Mechanical Description ...................................................................................................................................... 5 1.3 Objective ............................................................................................................................................................. 5 1.4 Related Submittal(s)/Grant(s) ............................................................................................................................. 5 1.5 Test Methodology ............................................................................................................................................... 5 1.6 Measurement Uncertainty ................................................................................................................................... 5 1.7 Test Facility ........................................................................................................................................................ 6 2 System Test Configuration.......................................................................................................................................... 7 2.1 Justification ......................................................................................................................................................... 7 2.2 EUT Exercise Software....................................................................................................................................... 7 2.3 Special Equipment .............................................................................................................................................. 7 2.4 Equipment Modifications.................................................................................................................................... 7 2.5 Local Support Equipment ................................................................................................................................... 7 2.6 EUT Internal Configuration Details .................................................................................................................... 8 2.7 External I/O Cabling List and Details ................................................................................................................. 8 2.8 Power Supply List and Details ............................................................................................................................ 8 3 Summary of Test Results ............................................................................................................................................ 9 4 FCC §15.247 (i), §2.1091 & IC RSS-102 – RF Exposure .......................................................................................... 10 4.1 Applicable Standard .......................................................................................................................................... 10 4.2 MPE Prediction ................................................................................................................................................. 11 4.3 MPE Results ..................................................................................................................................................... 11 5 FCC §15.203 & IC RSS-Gen §7.1.2 – Antenna Requirements ................................................................................ 12 5.1 Applicable Standard .......................................................................................................................................... 12 5.2 Antenna List ...................................................................................................................................................... 12 6 FCC §15.207 & IC RSS-Gen §7.2.4 – AC Line Conducted Emissions .................................................................... 13 6.1 Applicable Standards ........................................................................................................................................ 13 6.2 Test Setup ......................................................................................................................................................... 13 6.3 Test Procedure .................................................................................................................................................. 13 6.4 Test Setup Block Diagram .......................................................................................…

Text truncated - open the document above for the full version.

Rezolt Corporation FCC ID: O2R-226MS; IC: 10363A-226MS Report Number: R1304094-247 Page 74 of 79 FCC Part 15C/IC RSS-210 Test Report 15 Exhibit B – Test Setup Photographs 15.1 Conducted Emissions - Front View 15.2 Conducted Emissions - Side View Rezolt Corporation FCC ID: O2R-226MS; IC: 10363A-226MS Report Number: R1304094-247 Page 75 of 79 FCC Part 15C/IC RSS-210 Test Report 15.3 Radiated Emission Front View at 3 Meter 15.4 Radiated Emission below 1 GHz Rear View at 3 Meter Rezolt Corporation FCC ID: O2R-226MS; IC: 10363A-226MS Report Number: R1304094-247 Page 76 of 79 FCC Part 15C/IC RSS-210 Test Report 15.5 Radiated Emission above 1 GHz Rear View at 3 Meter