OCVRCAA1MOBILE PHONE

A1 User Manual GSM/WCDMA Digital mobile phone 1 Overview Thank you for choosing the WCDMA/GSM digital mobile phone. After reading this guide you will be able to fully master the use of your phone and appreciate all its functions and ease of use. Not only does the smartphone provide you with basic call functions such as call Register, but also with many practical functions and services, to improve the time you spend working and playing. The color screen mobile phone complies with the WCDMA/GSM technology and has been approved by certification authorities both domestically and abroad. The availability of some services and features described in this manual depends on the network and your subscription. Therefore, some menu items may not be available in your phone. The shortcuts to menus and features may also vary from phone to phone. Our company reserves the right to revise this manual content without prior notice. 1.2 Safety guide If your mobile phone is lost or stolen, please contact the telecommunications authorities or a sales agent immediately to have a hold on the phone and the SIM card. This will prevent economic loss caused by unauthorized calls made from your mobile phone. When you contact the telecommunications authorities or a sales agent, they will need to know the IMEI number of our mobile phone (remove battery to expose number located on the label on back of phone). Please copy this number and keep in a safe place for future use. In order to avoid the misuse of your mobile phone please take the following preventative measures: Set the PIN number of your mobile phone’s SIM card and change this number immediately if it becomes known to a third party. Please keep the phone out of sight when leaving it in a vehicle. It is best to carry the phone with you, or lock it in the trunk. Set call barring. 1.3 Safety warnings and notices Before using your mobile phone, read and understand the following notices carefully to ensure you will use it safely and properly. 1.3.1 General attention Only the battery and battery charger specified by our company should be used in your phone. Other products might result in battery leakage, overheating, fire or explosion. To avoid your phone malfunctioning, or catching fire, please do not violently impact, jolt or throw your phone. Please do not place the battery, mobile phone, or charger in a microwave oven or high-pressure equipment. Otherwise it could lead to unexpected accidents such as damage to the circuitry or fire hazard. Please do not use your phone near flammable or explosive gases, otherwise it could cause malfunction of your phone or fire hazard. Please do not subject your phone to high temperatures, high humidity or dusty places; otherwise this may lead to the malfunction of your phone. Keep your phone out of the reach of small children. Your phone is not a toy. Children could hurt themselves. To avoid your phone falling and malfunctioning or being damaged, please do not place it on uneven or unstable surfaces. 1.3.2 Notices when using your phone Turn off your mobile phone where the phone is not allowed, such as, on the airplane or in hospitals. Using the mobile phone in those places may impact the normal operation of electronic devices and medical instruments. Follow relevant regulations when using your mobile phone in those places. Your mobile phone has the auto turn-on feature. Check your alarm clock settings to confirm that your mobile phone will not be turned on automatically during flight. Please do not use your mobile phone near the weak signal or high precision electronic devices. RF interference might cause malfunctioning of such electronic devices and other problems. Special tips must be paid near the following equipment: hearing aids, pace makers and other medical electronic devices, fire detectors, automatic doors and other automatic control installations. To find out the effect of mobile phones on a pacemaker or other pieces of electronic medical equipment please contact the manufacturers or local sales agents of the equipment. Please do not subject the LCD to impact or use the screen to strike things, as this will damage the LCD board and cause leakage of the liquid crystal. There is a risk of blindness if the liquid crystal substance gets into the eyes. If this occurs rinse eyes immediately with clear water (under no circumstances rub your eyes) and go immediately to a hospital for treatment. Do not disassemble or modify your mobile phone, as it will lead to damage to the phone such as battery leakage or circuitry failure. Under very rare circumstances using the mobile phone in certain model cars may negatively affect the internal electronic equipment. In order to assure your safety under such circumstances please do not use the mobile phone. Please do not use needles, pen tips, or other sharp objects on the keypad as this may damage the mobile phone or cause it to malfunction. In the event of antenna malfunction, do not use your phone, as it could be harmful to human body. Avoid letting the phone come into close contact with magnetic objects such as magnetic cards as the radiation waves of the mobile phone may erase the information stored on floppy disks, pay cards and credit cards. Please keep small metal objects, such as thumbtacks far away from the receiver. When the receiver is in use it becomes magnetic and may attract these small metal objects and thus these may cause injury or damage the mobile phone. Avoid having the mobile phone come into contact with water or other liquids. If liquids enter the phone, this could cause a short circuit, battery leakage or other malfunction. 1.3.3 Notices when using the battery The battery has a limited service life. The remaining life gets shorter as the times of charging increase. If the battery becomes feeble even after the charging, this indicates the service life is over and you have to use a new battery. Do not dispose of old batteries with everyday domestic garbage. Please dispo…

Text truncated - open the document above for the full version.

Report No: CCIS13120056501 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS131200565RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 98 of 107 8 EUT Constructional Details Report No: CCIS13120056501 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS131200565RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 99 of 107 Report No: CCIS13120056501 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS131200565RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 100 of 107 Report No: CCIS13120056501 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS131200565RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 101 of 107

Label and label location Size：38.0mm X 25.0mm Label location

Report No: CCIS13120056501 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS131200565RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 102 of 107 Report No: CCIS13120056501 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS131200565RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 103 of 107 Report No: CCIS13120056501 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS131200565RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 104 of 107 Report No: CCIS13120056501 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS131200565RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 105 of 107 Report No: CCIS13120056501 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS131200565RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 106 of 107 Report No: CCIS13120056501 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS131200565RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 107 of 107 ------End of report------

Shenzhen Zhongjian Nanfang Testing Co., Ltd. Report No: CCIS13120056601 Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the CCIS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 1 Cover Page FCC SAR REPORT Applicant: SONOMA COMMUNICATIONS L.L.C Address of Applicant: 1159 SONORA CT SET 322 SUNNYVALE CA 94086 UNITED STATES Equipment Under Test (EUT) Product Name: Mobile phone Model No.: A1,A2,G1,G2,M1,M2,Q1,Q2 FCC ID: OCVRCAA1 Applicable standards: FCC 47 CFR Part 2.1093 Date of Test: 12 Dec., 2013 ~ 19 Dec., 2013 Test Result: Maximum Reported 1-g SAR (W/kg) Head: 0.708 Body: 1.211 Hotspot: 1.352 Report No: CCIS13120056601 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS131200566RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 2 of 162 2 Version Version No. Date Description 00 19 Dec., 2013 Original Prepared by: Date: 19 Dec., 2013 Report Clerk Reviewed by: Date: 03 Jan.,2014 Project Engineer Report No: CCIS13120056601 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS131200566RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 3 of 162 3 Contents 1 COVER PAGE ................................................................................................................................................ 1 2 VERSION ........................................................................................................................................................ 2 3 CONTENTS .................................................................................................................................................... 3 4 SAR RESULTS SUMMARY ........................................................................................................................... 5 5 GENERAL INFORMATION ............................................................................................................................ 6 5.1 CLIENT INFORMATION ............................................................................................................................................ 6 5.2 GENERAL DESCRIPTION OF EUT .......................................................................................................................... 6 5.3 MAXIMUM RF OUTPUT POWER ............................................................................................................................. 7 5.4 ENVIRONMENT OF TEST SITE ................................................................................................................................ 7 5.5 TEST LOCATION ..................................................................................................................................................... 7 6 INTRODUCTION ............................................................................................................................................ 8 6.1 INTRODUCTION ...................................................................................................................................................... 8 6.2 SAR DEFINITION ................................................................................................................................................... 8 7 RF EXPOSURE LIMITS ................................................................................................................................. 9 7.1 UNCONTROLLED ENVIRONMENT ........................................................................................................................... 9 7.2 CONTROLLED ENVIRONMENT ................................................................................................................................ 9 7.3 RF EXPOSURE LIMITS ........................................................................................................................................... 9 8 SAR MEASUREMENT SYSTEM ................................................................................................................. 10 8.1 E-FIELD PROBE ................................................................................................................................................... 11 8.2 DATA ACQUISITION ELECTRONICS (DAE) .......................................................................................................... 11 8.3 ROBOT ................................................................................................................................................................. 12 8.4 MEASUREMENT SERVER ..................................................................................................................................... 12 8.5 LIGHT BEAM UNIT .......................................................................................................................................…

Text truncated - open the document above for the full version.

Shenzhen Zhongjian Nanfang Testing Co., Ltd. Report No: CCIS13120056501 Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the CCIS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 1. Cover Page FCC REPORT Applicant: SONOMA COMMUNICATIONS L.L.C. Address of Applicant: 1159 SONORA CT STE 322 SUNNYVALE CA 94086 UNITED STATES Equipment Under Test (EUT) Product Name: MOBILE PHONE Model No.: A1,A2,G1,G2,M1,M2,Q1,Q2 Trade mark: RCA FCC ID: OCVRCAA1 Applicable standards: FCC CFR Title 47 Part 2 FCC CFR Title 47 Part22 Subpart H FCC CFR Title 47 Part24 Subpart E Date of sample receipt: 12 Dec., 2013 Date of Test: 13 Dec., to 02 Jan., 2014 Date of report issued: 03 Jan., 2013 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No: CCIS13120056501 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS131200565RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 2 of 107 2. Version Version No. Date Description 00 03 Jan.,2013 Original Prepared by: Date: 03 Jan.,2013 Report Clerk Reviewed by: Date: 03 Jan.,2013 Project Engineer Report No: CCIS13120056501 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS131200565RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 3 of 107 3. Contents Page 1. COVER PAGE .............................................................................................................................................................. 1 2. VERSION ....................................................................................................................................................................... 2 3. CONTENTS ................................................................................................................................................................... 3 4. TEST SUMMARY ......................................................................................................................................................... 4 5. GENERAL INFORMATION ........................................................................................................................................ 5 5.1 CLIENT INFORMATION ............................................................................................................................................ 5 5.2 GENERAL DESCRIPTION OF E.U.T. ....................................................................................................................... 5 5.3 TEST MODES .......................................................................................................................................................... 8 5.4 RELATED SUBMITTAL(S) / GRANT (S) .................................................................................................................... 8 5.5 TEST METHODOLOGY ............................................................................................................................................ 8 5.6 LABORATORY FACILITY.......................................................................................................................................... 8 5.7 LABORATORY LOCATION ....................................................................................................................................... 9 5.8 TEST INSTRUMENTS LIST ....................................................................................................................................... 9 6. SYSTEM TEST CONFIGURATION ........................................................................................................................ 10 6.1 EUT CONFIGURATION ......................................................................................................................................... 10 6.2 EUT EXERCISE .................................................................................................................................................... 10 6.3 CONFIGURATION OF TESTED SYSTEM ................................................................................................................ 10 6.4 DESCRIPTION OF TEST MODES ........................................................................................................................... 10 6.5 CONDUCTED OUTPUT POWER ............................................................................................................................ 11 6.6 OCCUPY BANDWIDTH .......................................................................................................................................... 18 6.7 MODULATION CHARACTERISTIC .......................................................................................................................... 45 6.8 OUT OF BAND EMISSION AT ANTENNA TERMINALS .....…

Text truncated - open the document above for the full version.

Report No: CCIS13120056501 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS131200565RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 97 of 107 7 Test Setup Photo Radiated Spurious Emission