OD6FT2301Remote Control 17FT HANGING REAPER

Battery Case/Sound Box Remote Control ON/OFF/DEMO Switch Cover Screw Back View Of Head D D D SET-UP/ OPERATING INSTRUCTIONS FOR 17 FT HANGING REAPER SET-UP/ OPERATING INSTRUCTIONS FOR 17 FT HANGING REAPER Wireless Remote Control Wireless Remote Control Hanging Cord Set-Up Instructions: Step. 1:Carefully remove product from package. Properly discard any fasteners, bags or tags with care. CAUTION: Be sure to secure the remote control device from the packaging. Step. 2: Carefully lay-out the 17 foot Reaper and the “hanging cords” in an open area adjacent to where you plan on hanging the Reaper. CAUTION:This is a large display piece and we advise that at least two people assist in the hanging of the display. Be sure to use a stable and secure ladder when hanging the display. Step. 3: Before hanging the display, activate the sound box by switching to the “ON” position. This will allow the Reaper to interact with the remote control. Step. 4: The hanging cords that are included with the Reaper can be secured or tied to a stable overhead support. Make sure that whatever the Reaper is secured to is strong enough to support the weight of the Reaper. BE SURE THAT THE EYE SCREWS ARE SECURELY ANCHORED INTO “SOLID” MATERIAL. (Eye Screws are not included) Step. 5: Test the remote control system from the required distance between the remote and the Reaper. Important: The maximum remote activation distance is 20 ft. Note: If you plan on suspending your Reaper from a ceiling, we suggest that you use ¼ inch “eye screws” and securely attach to the ceiling. Use heavy duty tie cords to secure the Reaper to the eye screws and make sure that the eye screws are securely anchored into “solid” material strong enough to support the weight of the Reaper. Please note that “eye screws” are not included with the Reaper. READ CAREFULLY & RETAIN FOR FUTURE REFERENCE! I12-23-H014©2012 PAC (BVI), Ltd Printed in China READ CAREFULLY & RETAIN FOR FUTURE REFERENCE! I12-23-H014©2012 PAC (BVI), Ltd Printed in China Battery Replacement Battery Powered – Requires three (3) “D” batteries for the “Sound Box” and three (3) “AAA” batteries for the Wireless Remote Control. Please note that the batteries are included with your purchase. To Replace Sound Box Battery: 1. Remove battery case cover. Battery case is located in the back of the hanging reaper. Please Open the hook and loop closure and use a screwdriver to remove the safety screw and then remove the battery compartment cover (See diagram). 2. Clean the battery contacts and also those of the device prior to battery installation. 3. Insert 3 “D” batteries with correct polarity and replace cover and safety screw. 4. Turn switch to the “ON” position. Replace batteries if the lights become dim or sound is distorted or faint. To Replace the Remote Control Batteries: 1. Remove the battery compartment case cover which is located on the back of the remote control. 2. Clean the battery contacts and also those of the device prior to battery installation. 3. Insert 3 “AAA” batteries with correct polarity and replace cover and safety screw. Replace batteries if the lights become dim or sound is distorted or faint. To Activate Sound Box: The ON/OFF/DEMO switch is located on the sound box in the back of the neck of the Reaper. Move the switch to the “ON” position to activate the sound box so it will interact with the remote control. Switch to the “DEMO” position for in-store “Try-Me” feature and then press the “Try-Me” button to see and hear a demonstration. Switch to “OFF” and remove batteries when not in use. To Activate Remote Control: Press the “right” button to activate the LED lights. Press the “left” button to activate the lights and the sounds. (Important: The maximum remote activation distance is 20 ft.) BATTERIES SHOULD BE REMOVED AND REPLACED BY ADULTS ONLY. • Do not mix old and new batteries. • Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc.) batteries. • To avoid the possibility of explosion or leakage, do not dispose of batteries in a fire or attempt to recharge standard or alkaline batteries. • Be sure to insert batteries with correct polarities and always follow the product and battery manufacturer’s instructions. • Remove batteries and store them in a cool, dry place when not in use. SAFETY INSTRUCTIONS: 1. This item is for INDOOR/OUTDOOR use. 2. All cautions listed in these operating instructions should be followed. 3. Do not use near water, such as a bathtub, laundry tub, kitchen sink, swimming pool or other areas where open water is stored. 4. Do not display reaper near any heat source, such as a radiator, stove, fireplace, etc. 5. Display should only be serviced by a qualified service technician. 6. Take extra care when displaying any figure that contains small parts around small children. 7. Use of the reaper should always be under the supervision of an adult. 8. Remove batteries when not in use or when storing the reaper. CAUTION: Please remove batteries if their power is consumed or if the product is to be left unused for a long period of time. RECYCLE YOUR BATTERIES: To help protect our environment, we recommend that all batteries be recycled. You can find a local recycling center by going to: http://earth911.com/hazardous/single-use-batteries/ Or, in the United States call 1-800-CLEANUP for a recycling location near you. This item is not a toy. For decorative purposes only. Not intended for use by children under the age of 14. PRESS LEFT BUTTON FOR LIGHT & SOUND PRESS RIGHT BUTTON FOR LIGHT ONLY AA AA AA ON OFF DEMO Neck This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to oper…

Text truncated - open the document above for the full version.

PAN ASIAN CREATIONS LIMITED —————————————————————————————————————— PHOENIX TEST-LAB GmbH Product Certification Königswinkel 10 D 32825 Blomberg Date: 14.06.2012 Authority to Act as an Agent We declare that the following representative (agent) Name Jamy Yu Position Manager Company Name Dongguan Dongdian Testing Service Co.,Ltd. Address 17, Zongbu Road 2, Songshan Lake Sci&Tech, Industry Park, Dongguan City, Guangdong Province, China, 523808 Tel / Fax Tel: +86-0769-22891499 fax:0769-22895596 E-Mail [email protected] to act on our behalf on all matters concerning the application and documents submitted to PHOENIX TEST-LAB for product certification below Product Name 17FT HANGING REAPER Model Name 2301-17438 Brand Name / We also authorize BZT – TCP Certification GmbH, Ms.Wanida Patthanavoj (address: Hermann - Loens - Weg 6, 15859 Storkow b. Berlin Germany) to process the application. Yours sincerely, Signatory Name Didy Hu Position Manager Company Name PAN ASIAN CREATIONS LIMITED Address 1104#GuanJinRd.,GuanGuangRd.&MissionHillsRd. Intersections, Guan Lan, Bao An, Shenzhen, China Tel / Fax 755-27971666 E-Mail [email protected] In case of FCC, we certify that we are not subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance.

PAN ASIAN CREATIONS LIMITED ————————————————————————————————————— Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Request for Confidentiality Company name: PAN ASIAN CREATIONS LIMITED FCC ID: OD6FT2301 FCC Part 15 Certification Gentlemen, Pursuant to 47 CFR 0.457(d)(1)(ii) and 0.459 we hereby requests permanent confidentiality of the following documents for the subject application: Exhibit Type Description ☒ Schematics All circuitry of devices and component values ☒ Block Diagrams Details of device showing the frequency of all oscillators ☐ Bill Of Materials Parts list of the product for the radio device ☒ Operational Description Description of the circuit functions These documents contain detailed system and equipment description and related information about the product which we considers to be proprietary, confidential and a custom design and otherwise would not release to the general public. Since the design is a basis from which future technological products will evolve, we consider that this information would be of benefit to its competitors and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Yours sincerely, Signatory Name Didy Hu Position Manager Company Name PAN ASIAN CREATIONS LIMITED Address 1104#GuanJinRd.,GuanGuangRd.&MissionHillsRd. Intersections, Guan Lan, Bao An, Shenzhen, China Tel / Fax 755-27971666 E-Mail [email protected]

Dongguan Dongdian Testing Service Co., Ltd Report No: DDT-F12035 Page 23 of 27 7. Photos of the EUT Dongguan Dongdian Testing Service Co., Ltd Report No: DDT-F12035 Page 24 of 27 Dongguan Dongdian Testing Service Co., Ltd Report No: DDT-F12035 Page 25 of 27

Label and Location FCC ID: OD6FT2301 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Dongguan Dongdian Testing Service Co., Ltd Report No: DDT-F12035 Page 26 of 27 Dongguan Dongdian Testing Service Co., Ltd Report No: DDT-F12035 Page 27 of 27 END OF REPORT

FCC CERTIFICATION TEST REPORT FOR Issued By: Dongguan Dongdian Testing Service Co., Ltd. Add: No. 17, Zongbu Road 2, Songshan Lake Sci&Tech, Industry Park, Dongguan City, Guangdong Province, China, 523808 Tel: +86-0769-22891499 http://www.dgddt.com Report No: DDT-F12035 Issued Date: 2012/06/08 Applicant : PAN ASIAN CREATIONS LIMITED Address : 1104# Guan Jin Rd., Guan Guang Rd.& Mission Hills Rd. Intersections, Guan Lan, Bao An, Shenzhen, China Equipment under Test : 17FT HANGING REAPER Model No : 2301-17438 FCC ID : OD6FT2301 Manufacturer : MODERN GLOBAL INC Address : LIAN ZI FANG BUSINESS ROAD #32, GONGLIAN INDUSTRIAL ZONE, WANJIANG TOWN DONGGUAN, GD CN, 52300 Dongguan Dongdian Testing Service Co., Ltd Report No:DDT-F12035 Page 2 of 27 TABLE OF CONTENTS Test report declares..........................................................................................................3 1. Summary of test results ............................................................................................................... 4 2. General test information .............................................................................................................. 5 2.1. Description of EUT ..................................................................................................................... 5 2.2. Accessories of EUT..................................................................................................................... 5 2.3. Assistant equipment used for test ................................................................................................ 5 2.4. Block diagram of EUT configuration for test ............................................................................. 5 2.5. Test environment conditions ....................................................................................................... 5 2.6. Test laboratory............................................................................................................................. 6 2.7. Measurement uncertainty ............................................................................................................ 6 3. Radiated emission ....................................................................................................................... 7 3.1. Test equipment ............................................................................................................................ 7 3.2. Block diagram of test setup ......................................................................................................... 7 3.3. Limit ............................................................................................................................................ 8 3.4. Test Procedure............................................................................................................................. 9 3.5. Test result .................................................................................................................................. 10 4. stop transmitting time test ......................................................................................................... 18 4.1. Test equipment .......................................................................................................................... 18 4.2. Block diagram of test setup ....................................................................................................... 18 4.3. Limits ........................................................................................................................................ 18 4.4. Test Procedure........................................................................................................................... 18 4.5. Test result .................................................................................................................................. 18 5. 20dB Bandwidth........................................................................................................................ 20 5.1. Test equipment .......................................................................................................................... 20 5.2. Block diagram of test setup ....................................................................................................... 20 5.3. Limits ........................................................................................................................................ 20 5.4. Test Procedure........................................................................................................................... 20 5.5. Test result .................................................................................................................................. 20 6. Test setup photograph ............................................................................................................... 22 7. Photos of the EUT ..................................................................................................................... 23 Dongguan Dongdian Testing Service Co., Ltd Report No: DDT-F12035 Page 3 of 27 TEST REPORT DECLARE Test Standard Used: FCC Rules and Regulations Part 15 Subpart C: 2010 Test procedure used: ANSI C63.10:2009 We Declare: The equipment described above is tested by Dongguan Dongdian Testing Service Co., Ltd and in the configuration tested the equipment complied with the standards specified above. The test results are contained in this test report and Dongguan Dongdian Testing Service Co., Ltd is assumed of full responsibility for the accuracy and completeness of these tests. After test and evaluation, our opinion is that the equipment provided for test compliance with the requirement of the above FCC standards. Report No: DDT-F12035 Date of Test: 2012/06/07—2012/06/07 Date of Report: 2012/06/08 Prepared By: Approved By: ________________ _____________________ Leo Liu/Engineer Jamy Yu / EMC Manager Note: This report appli…

Text truncated - open the document above for the full version.

Dongguan Dongdian Testing Service Co., Ltd Report No: DDT-F12035 Page 22 of 27 6. Test setup photograph