OF5PG-IH119TX2.4G WIRELESS HOME THEATER AUDIO AND CHARGER DOCK (TX)

PEGA Limited Address: Unit 10A, 12/F, Tower 2, China Hong Kong City, No.33 Canton Road, Tsim Sha Tsui, Hong Kong Tel: +852-27361068 / 27361069 / 27361075 / 27361076 Fax: +852-27361065 Email: [email protected] Web Site: www.pega.hk Name ： iPhone 2.4G home theater speaker Product model ： PG-IH119 Product photo Built ‐ in transmitter Built ‐ in transmitter Introduction This product is 2.4G wireless speaker, it's suitable for iPhone 3, iPhone 3GS, iPhone4, iPhone 4S, iPad, iPad2,iPod touch, iPod nano, PS vita and PC. The speakers are 2.4G wireless transmission and can be charged by the charge stand. 1. With 2pcs 2.4G wireless speakers , which can audio output for iPhone, iPad, iPod, PS vita, PC and etc. 2. The packaging include 3pcs removable connectors( Apple, PS vita plug and Micro USB connectors), user can use the connector for charge and play audio with coresponding consoles. （ Micro USB only provide battery charging function. Apply to Sumsong, HTC, NOKIA and Blackberry cellphones ） 3. The speakers built ‐ in lithium battery, can be charged by the charge stand. 4. Two speakers had independent volume control and left/right channel for choice. 4. The speakers can be audio played in any place in a effective range. 5. With "BALANCE" "BASS" sound rotational knob, which can adjust sounds effects as per indoor ‐ condition and individual preference. With "ON/OFF" rotational power switch. 6. It has charging indicate light, receiving and transmetting indicate light. 7. with 3.5mm audio interface, using the attached 3.5mm cable to connect other external audio equipment for audio play (such as MP3, MP4, etc.). 8. With 1 pc remote controller for control music playback for iPhone/ iPad/iPod. (remote controll is not all compatible with IPAD3) Packaging include: Apple connector X 1pc PS VITA connector X 1pc Micro USB connector X 1pc 2.4G dongle X 1pc iPhone/iPad Remote controller X 1pc 3.5mm audio cable X 1pc AC adapter x 1pc Electronic Parameters ： Power adaptor ： DC9V/2.5A Wireless audio transmission surface distance : 20m Speaker output power ： 4.5W*2 Remote controller built ‐ in battery ： <2032> Speaker built ‐ in battery capacity ： 1000mAh<nomal use 2 hours> Remote controller distance ： 45° 8 ‐ 10m Speakers charging current ： 400mA User Manual 1. Connet iPhone to playback music: ( Same usage as connect an external audio source to palyback music) Place the Apple connector to the slot of charge stand → get through the power to the charge stand, the charge stand power indicator light red → Plug in the 2.4G dongle to the back of charge stand (dongle LED slowly flash red) → press the "Play / Pause" key on the charger stand (dongle's LED slowly flash red) → turn on the power switch of receiver(speaker) (blue light flashing slowly) → press the code key on the receiver(speaker)(blue light flashing quickly with sound) → press the code key on dongle ( dongle's code LED light red and flashing quickly, speaker's code LED light blue ) → success of match the code → plug iPhone into the charger stand for playback music (dongle's LED light red ). The same usage for use with PS vita and other Micro USB device, just need to change the corresponding connectors. Note: * After success match mode, the dongle and receiver(speakers) will be stay in connection status while you reconnect the power after interruption of power supply. *Plug in external device when playing with iPhone,iPad, PSV or Micro USB device, speakers will preferred automatically switching play external device music while playing musice with iPhone, PS Vita or Micro USB device. 2. Connect PC to playback music: Plug dongle into PC's USB port (dongle's LED will slowly flash red ) → turn on the power switch of receiver(speaker) (blue light flashing slowly) → press the code key on the receiver (blue light flashing quickly with sound) → press the code key on dongle( dongle's LED light red and flashing quickly, receiver's LED light blue ) → successful match the code → open the music player and playback music (dongle's LED light red ). 3 Remote ‐ controller function 13 functional keys on remote controller: 1. AL OFF, 2. Menu, 3. Enter, 4. Previous (Fast ‐ backward), 5. Next (Fast ‐ forward), 6. Direction"up", 7. Direction"under", 8. Play/ Pause, 9. VOL"+", 10. VOL" ‐ ", 11.Cycleplay 12. Mute, 13. Random play 4. Charger stand After powered on, the LED on charge stand light red ‐‐ place iphone/ipad or PS vita or Micro USB connector to charge slot for charging the corresponding device ‐‐‐ can autoplay music by press "Play/Pause” key ‐‐‐ press " Play/Pause" key again to stop play ; voulume control keys “+ and ‐ ” on left and right side ‐‐‐ Speaker charge indicator on both sides of charge stand, when charging for the speaker, the corresponding indicator light blue, indicator will be off after speaker was fully charged ‐‐‐ There is a dual color indicator at middle of charge stand, the indicator light red when pause music, the indicator light blue when replay music. 5. Speakers There are two volume control keys on the speakers ‐‐‐ you can seperately adjust the volume of speaker. A dual color indicator on the speaker (light blue means wireless audio connection status, light red means low power), two push button on speakers (one is power key, another one is left channel and right channel select key; one Soft ‐ touch code key on speakers. Attention 1. When charging for the speaker, steady placed in the corresponding charging slot. 2. When not in use, turn off the speaker power to ensure that the built ‐ in battery can be prolong the usage time. 3. Please do not expose your product to high temperature place the product into fire. 4. Please do not squeeze hard or fall to drop this product. 5. Please do not use chemical solvents to clean the product, for clean, gently wipe with a damp cloth. 6. The proper use of this product and proper maintenance to extend their useful life. FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the follow…

Text truncated - open the document above for the full version.

Audio signal OSC: 12 MHz Audio compression processor Flash SYNC OSC: 12.288 MHz LED 2.4G/RF OSC: 16 MHz Antenna

Page 1 of 1 TIMCO ENGINEERING INC. PRODUCT TESTING AND CERTIFICATION 849 NW State Road 45 Newberry Fl 32669 FCC Approvals 888.472.2424 or 352 472 5500 F 352.472.2030 Industry Canada Approvals Product Safety Approval Email: [email protected] http://www.timcoengr.com Notified Body for Europe Test Lab Attestation Letter Date of Test: 2012‐7‐3 Applicant Name: PEGA LIMITED FCC Id: OF5PG‐IH119TX Name of Engineer Performing Test: Eric Li Statement of Compliance: Shenzhen Certification Technology Service Co., Ltd, declares that this Unit has been tested in accordance with the test method identified in this test report and that we observed it being tested. It also declares that the Unit complies with the relevant limits. All instrumentation and accessories used to test this unit for compliance to the indicated test method are calibrated regularly in accordance with ISO 17025:2005 requirements by laboratories accredited by A2LA, NVLAP, or ACLAS for the measurement parameters. The measurements were made at: Shenzhen Certification Technology Service Co., Ltd 2F, Building B, East Area of Nanchang Second Industrial Zone, Gushu 2nd Road, Bao'an District, shenzhen 518126, China Test Lab Witness‐ Signature of Test Lab Witness: Full Name, Typed: Mark Zhu Title of Witness: General Manager Email Address: [email protected] Phone No.: 86‐755‐86375552

External Photo

FCC Certification Label FCC ID: OF5PG-IH119TX Label Location on EUT EUT View/ FCC ID Label Location

Internal Photo Antenna

Operational Description Transmitter is a 2.4G Hi-Fi wireless audio transmit moudle, built-in Hi-Fi 24Bit stereo ADC. This moudle could perfect wireless transmit iPhone/iPod/iPad/MP3/AV/TV etc analog audio and PC digital audio. This moudle is applicable to civil and professional wireless active speaker system, home theater system and wireless microphone system and other wireless audio transmission system and so on. This moudle Adopt 2.4GHz RF technology, low delay, high quality 24Bit/44.1K sampling rate. LED function: indicate speaker status, flash quickly when entered connection mode, flash slowly when dropped or no audio single transmission. Frequency range 2.401-2.479GHz

PCB Top PCB Bottom PCB

1 2 3 4 5 6 78 A BC D E F 8 7 6 5 4 3 2 1 F E D CB A I2S0_MCLKI2S0_LRCKI2S0_DATAI2S0_SCLK SPI _MI SOSPI _MOSISPI _SCKSPI _CS0SPI _CS1SPI _CS2 D1V2 CK_TRSTCK_TCKCK_TDICK_TMSCK_TDONRST D3V3 D3V3SPI_SCKSPI_MOSI SPI _CS0SPI _MI SOGNDD3V3 IRQ_RF D3V3 LED D3.3V 1.8VD3.3V D+ V+5V V+5V D3.3V 1.8V D-D+ SL _CL KSL _SDASPI1_MISOSPI1_MOSISPI1_SCKDREQU SPI1_CS DREQUPA_TXCESPI1_CSSPI1_SCKSPI1_MOSISPI1_MISO A3V3RF3V3D1V2 D3V3 D3V3 KEY1ADC_PCN D- AD/USB POWER USB MCU 10R RF3V3 0RNC 10K 1K 10R 56K4K710K10K10K10K 12.288M RF_LED 104 104 104 104 104 104 IMCLK 20 AVSS 1 GP B6/SCLK2 25 VDD 8 VDD 29 CS1 6 CS2 7 VDD33 33 AVDD 2 DFTC1 13 DFTC0 14 VSS 10 VSS 27 VSS 47 VSSD 31 IWS 16 RST 46 VDD 48 MI SO 11 SCLK 9 VDD33 15 GPA7/CS22 32 IDATA/SPDIF 17 TRST 45 GPB0/ISCK2 23 GPB1/IWS2 22 GPA4 36 GPA5/PWM2 35 GPA6/PWM1 34 GPB5/MISO2 26 GPB7 24 XI 3 XO 4 GPA0 40 TCLK 44 CS0 5 ISCLK 19 MOSI 12 GPB4/CS21 28 GPB3/CS20 30 GPB2IDATA2/SPDIF2 21 GPA3 37 GPA2 38 GPA1 39 TDO 41 TDI 42 TMS 43 MAF0578TX 10520P20P 20P 20P 12M 1M 1M CS 1 SO 2 WP 3 GND 4 SI 5 SCK 6 HOLD 7 VCC 8 AT25L512 104 104 104 104104 104104 104 104 104 104 104 104 106 106 106 106 106106106 SYNC AR_IAL_I ADC_PCN A+5V FLASH NCNC 104 A3V3 ADC 10R10R10R10R 6.8nH3.9nH 1.0nH 2.2pF 1.2pF 0.5pF 0.5pF 33nF 22K 8.2nH NC 4.7pF SPI_MISOSPI_MOSISPI_SCKSPI_CS1IRQ_RFCE 16M 10pF 1.2pF 10nF RF3V3 1M 1R0 2.2pF 1.0nH 100pF1.5pF U+5V A+5VAL_IAR_IAGNDPGND V+5V 20pF 20pF 6.8pF 2.7nH 0.5pF 1.0nH 0.5pF 10pF RF_VCC RF_VCC RF_O 750R 1.1K 1.2K RF PA_TX NCNC MCLK 11 LRCK 10 SDTO 9 SCLK 12 CKS2 15 PDN 9 DIF 14 CKS0 16 VD 7 VA 6 AINL 2 AINR 1 AGND 5 VCOM 4 CKS1 3 DGND 8 AK5357 USB_VBUS 1 USB_DATA- 2 USB_DATA+ 3 USB_GND 4 SIG_GND 5 SI G_RCH 6 SI G_LCH 7 A/D+VCC 8 DETEC_ I/O 9 JACK_ GND 10 USB 3.0 LDO_3V3 1 LDO_1V8 2 USB_3V3 3 DM 4 DP 5 OSCI 6 OSCO 7 OSC_3V3 8 CORE_1V8 9 SAR_VREF_3V3 10 VDD_3V3_IO 11 SEL_6M 12 VSS 13 P4.4 14 P4.3 15 P4.2 16 P4.1 17 P4.0 18 OSCSEL 19 P0.7 20 P0.6 21 P0.5 22 P0.4 23 P0.3 24 P0.2 25 P0.1 26 P0.0 27 TSET_MODE 28 VPP 29 P1.2 30 P1.1 31 LDO_5V 32 MP01006 4K74K7 10R A+5V CE 1 MOSI 4 SCK 3 CSN 2 XP 9 MOSO 5 VDD 15 IRQ 6 RFN 13 VSS 14 VDDPA 11 XN 10 IREF 16 RFP 12 VDD 7 VSS 8 VDD 18 VSS 17 CDVDD 19 VSS 20 BK2421 I 4 O 2 G 1 G 3 O I BF2520 1 2 ANT 2 3 1 IO G CE6219 P1.2M 2 3 1 IO G CE6219 P3.3M 2 3 1 IO G BL8550-3.3 VCC 1 RFin 2 V_Bias 3 NC 4 Vb1 5 Vb2 6 RFout 7 RFout 8 GND 9 AP1110 476 474106 106106 106 MAF0578TX PA

FCC PART 15.249 EMI MEASUREMENT AND TEST REPORT For PEGA LIMITED Unit 10A, 12/F, Tower 2, China Hong Kong City, No.33 Canton Road, Tsim Sha Tsui, Hong Kong FCC ID: OF5PG-IH119TX July 6, 2012 This Report Concerns: Original Report Equipment Type: 2.4G Wireless Home Theater Audio and Charger Dock (TX) Test Engineer: Eric Li Report No.: BST12060250Y-1ER-3 Receive EUT Date/Test Date: June 29, 2012/ July 2-5, 2012 Reviewed By: Christina Deng Prepared By: Shenzhen BST Technology Co.,Ltd. 3F,Weames Technology Building, No. 10 Kefa Road, Science Park, Nanshan District,Shenzhen,Guangdong,China Tel: 0755-267477513 Fax: 0755-267477513 ext.826 Note: The test report is specially limited to the above company and this particular sample only. It may not be duplicated without prior written consent of Shenzhen BST Technology Co.,Ltd. This report must not be used by the client to claim product certification,approval,or endorsement by NVLAP, NIST or any agency of the US Government. PEGA LIMITED FCC ID: OF5PG-IH119TX BST FCC ID REPORT: BST12060250Y-1ER-3 Page 2/23 TABLE OF CONTENTS 1. GENERAL INFORMATION ....................................................................................................3 1.1. Report information ............................................................................................................3 1.2. Measurement Uncertainty .................................................................................................3 2. PRODUCT DESCRIPTION ......................................................................................................4 2.1. EUT Description ...............................................................................................................4 2.2. Block Diagram of EUT Configuration..............................................................................4 2.3. Support Equipment List ....................................................................................................5 2.4. Test Conditions .................................................................................................................5 3. FCC ID LABEL...........................................................................................................................6 4. TEST RESULTS SUMMARY ...................................................................................................7 Modifications ................................................................................................................................7 5. TEST EQUIPMENT USED .......................................................................................................8 6. ANTENNA REQUIREMENT ...................................................................................................9 6.1. Standard Applicable..........................................................................................................9 6.2. Antenna Connected Construction .....................................................................................9 6.3. Result ................................................................................................................................9 7. CONDUCTED POWER LINE TEST .....................................................................................10 7.1. Test Equipment ...............................................................................................................10 7.2. Test Procedure ................................................................................................................10 7.3. Test Setup........................................................................................................................10 7.4. Conducted Power line Emission Limits..........................................................................10 7.5. Conducted Power Line Test Result.................................................................................11 8. RADIATED EMISSION TEST ...............................................................................................13 8.1. Test Equipment ...............................................................................................................13 8.2. Test Procedure ................................................................................................................13 8.3. Radiated Test Setup ........................................................................................................13 8.4. Radiated Emission Limit.................................................................................................15 8.5. Radiated Emission Test Result .......................................................................................16 9. BAND EDGE .............................................................................................................................18 9.1. Test Equipment ...............................................................................................................18 9.2. Test Procedure ................................................................................................................18 9.3. Band Edge FCC 15.249(d) Limit ....................................................................................18 9.4. Band Edge Test Result ....................................................................................................19 PEGA LIMITED FCC ID: OF5PG-IH119TX BST FCC ID REPORT: BST12060250Y-1ER-3 Page 3/23 1. GENERAL INFORMATION 1.1. Report information 1.1.1.This report is not a certificate of quality; it only applies to the sample of the specific product/equipment given at the time of its testing. The results are not used to indicate or imply that they are application to the similar items. In addition, such results must not be used to indicate or imply that BST approves recommends or endorses the manufacture, supplier or use of such product/equipment, or that BST in any way guarantees the later performance of the product/equipment. 1.1.2.The…

Text truncated - open the document above for the full version.

Radiated emissions test Conducted emissions test