OFK-AT-216Dog training colla

R www.aetertek.com AT-216 User's Manual for Dog training colla AT-216 Additional Information for Terms of Use and Limitation of Liability 1. Terms of Use This product is offered to you conditioned upon your acceptance without modification of the terms, conditions, notices contained herein. Usage of this product implies acceptance of all such terms, conditions, and notices. 2. Proper Use This product is designed for use with dogs where training is desired. The specific temperament of your dog may not work with this product. We recommend that you not use this product if your dog is less than 8 pounds or if your dog is aggressive. If you are unsure whether this is appropriate for your dog, please consult your veterinarian, certified trainer or contact our customer support. 3. No Unlawful or Prohibited Use This product is designed for use with dogs only. This dog training device is not intended to harm, injure, or provoke. Using this product in a way that is not intended could result in violation of Federal, State or local laws. 4.Limitation of Liability In no event shall Aetertek be liable for any direct, indirect, punitive, incidental, special or consequential damages, or any damages whatsoever arising out of or connected with the use or misuse of this product. Buyer assumes all risks and liability from the use of this product. 5. Modification of Terms and Conditions Aetertek reserves the right to change the terms, conditions, and notices under which this product is offered. For parts and warranty, contact with authorized dealer shown in warranty card Hardware Included------------------------------------------------------------------------02 Quick Start --------------------------------------------------------------------------------03-04 Training Tips ------------------------------------------------------------------------------05-06 S a f e t y - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 0 7 Common Problems & Fixes-------------------------------------------------------------08-09 Safety Guidance---------------------------------------------------------------------------10 Warranty , Terms & Conditions , compliance------------------------------------------11-12 Additional Information for Terms of Use and Limitation of Liability------------------13 -01- R Super Remote Dog Trainer AT-216 AT-216 AT-216 -02- Quick Start R Super Remote Dog Trainer 1 Step 1 Install the antenna onto the transmitter. Make sure the antenna is securely attached. 4 Step 4 Charge the receivers. A RED LED light of the receiver is on during charging. When charging is over, the red LED light will be off with the BLUE LED light on. Full battery charge takes about 3 hours. Tips: Recommend to charge the receiver upto 4 hours for the first 3 times . 2 Step 2 Install the 9V battery into the transmitter correctly . (Note: pay attention to the positive and negative poles ) a:Press and hold on On/Off button until the red LED light to be solid. Note:if receiver just charg ed, the red LED light is solid and receiver is waiting for sync, so no need to do this Step 5: Sync the receiv er and t ransmitter. b: press down Shoc k, Beep o r Vibr ate b ut t on, rec eiv er w ill get t o be c om m unic at ed w ith t rans m it t er. 5 3 Step 3: Screw the metal prongs onto the receiver till securely attached. a: Unplug the charger, the red Led light is solid and receiver is waiting for sync ; Note:if receiver had been turned off and still have power remained,press and hold on the On/Off button until the red Led light to be solid, then the receiver is waiting for sync. b:push any of the f unction buttons (shock, beep, vibrate) on the transmitter. As soon as the receiver pairs with the transmitter, the RED LED light turns off and BLUE LED light flashes every 10 seconds. -03- Quick Start 6 Step 6: Check the Function buttons (beep, vibrate, shock) Push the Beep button or Vibrate button, the receiver will produce beeping sound or vibration. To test the shocks, cap the shock test kit on the metal prongs, push the shock button to see the bulb light up immediately. 0 7 8 Step 8 Choose the dog mode(Dog1, or Dog2, or Dog3) Push the Dog Switch button in the left of the transmitter to choose a dog mode(Dog 1,Dog2,Dog3). Push the button to change dog mode from Dog1-Dog2-Dog3 . Dog 1 means the first dog , Dog2 is for the second dog , Dog3 is for the second dog . If you need to train the 3 dogs separately, please pair the transmitter and receiver one by one 7 0 7 Step 7 Adjust the intensity or duration of the functions Rotate the thumbwheel dial to choose the des ired levels of correctional signals. Note: Longer(shorter) holding beep, vibrate or shock button will lead to longer (shorter) duration of beep, vibrate or shock time. Start to train: Put the collar into the receiver, wear the receiver around dog ’s neck, leave one finger place between the collar and the neck, then it ’s -04- ready to train. Super Remote Dog Trainer R -05- R Super Remote Dog Trainer Aetertek -06- AT-216 R Super Remote Dog Trainer -07- R Super Remote Dog Trainer No beep, vibration or sho ck -08- R Super Remote Dog Trainer -09- R Super Remote Dog Trainer Aetertek AT-216 -10- R Super Remote Dog Trainer Aetertek -11- R Super Remote Dog Trainer -12- Warranty, Terms & Conditions, Compliance(continued) Aetertek Additional Information for Terms of Use and Limitation of Liability R Super Remote Dog Trainer 1. Terms of Use This product is offered to you conditioned upon your acceptance without modification of the terms, conditions, notices contained herein. Usage of this product implies acceptance of all such terms, conditions, and notices. 2. Proper Use This product is designed for use with dogs where training is desired. The specific temperament of your dog may not work with this product. We recommend that you not use this product if your dog is less than 8 pounds o…

Text truncated - open the document above for the full version.

Shenzhen Aetertek Technology Co.,Ltd Address: 4th floor, 49th Bldg, 5th Cuigang Industrial Zone, Huaide,Fuyong, BaoAn, guangdong,shenzhen, China Tel: +86-755-89471077 Fax: +86-755-27344006 2014-04-22 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Confidentiality Request regarding application for certification of FCC ID: OFK-AT-216 We hereby request confidential treatment of information accompanying this application as outlined below: - Schematics Diagram - Block Diagram - Operation description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s name / title : Jason Lau / Manager Contact information / address : 4th floor, 49th Bldg, 5th Cuigang Industrial Zone, Huaide,Fuyong, BaoAn, guangdong,shenzhen, China Tel: +86-755-89471077 Fax: +86-755-27344006

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:OFK-AT-216 Report No.: LCS1404170653E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 4 1. EXTERIOR PHOTOGRAPHS Fig.1 Fig.2 Antenna SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:OFK-AT-216 Report No.: LCS1404170653E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 4 Fig.3 Fig.4 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:OFK-AT-216 Report No.: LCS1404170653E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 3 of 4 Fig.5 Fig.6 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:OFK-AT-216 Report No.: LCS1404170653E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 4 of 4 Fig.7 Fig.8

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: OFK-AT-216 Report No.: LCS1404160653E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 1 LABEL AND LOCATION Size: L2.0mm*W1.5mm Material: Tagboard Glue: adhesive sticker Font color: Black Label color: White Label Location Dog training colla Model No.: AT-216 FCC ID: OFK-AT-216

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: OFK-AT-216 Report No.: LCS1404160653E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 3 1. INTERIOR PHOTOGRAPHS Fig.1 Fig.2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: OFK-AT-216 Report No.: LCS1404160653E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 3 Fig.3 Fig.4 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: OFK-AT-216 Report No.: LCS1404160653E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 3 of 3 Fig.5

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: OFK-AT-216 Report No.: LCS1404160653E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 22 FCC TEST REPORT FOR Shenzhen Aetertek Technology Co.,Ltd Dog training colla Model No.: AT-216 Additional Model No.: Please refer to page 22 Prepared for : Shenzhen Aetertek Technology Co.,Ltd Address : 4th floor, 49th Bldg, 5th Cuigang Industrial Zone, Huaide, Fuyong, BaoAn, guangdong, shenzhen, China Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd Address : 1/F., Xingyuan Industrial Park, Tongda Road, Bao’an Avenue, Bao’an District, Shenzhen, Guangdong , China Date of receipt of test sample : April 16, 2014 Number of tested samples : 1 Serial number : Prototype Date of Test : April 16, 2014 - April 25, 2014 Date of Report : April 25, 2014 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: OFK-AT-216 Report No.: LCS1404160653E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 22 FCC TEST REPORT FCC CFR 47 PART 15 C(15.249): 2013 Report Reference No. ............... : LCS1404160653E Date of Issue ................................. : April 25, 2014 Testing Laboratory Name .......... : Shenzhen LCS Compliance Testing Laboratory Ltd. Address ......................................... : 1/F., Xingyuan Industrial Park, Tongda Road, Bao’an Avenue, Bao’an District, Shenzhen, Guangdong, China Testing Location/ Procedure......... : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name ....................... : Shenzhen Aetertek Technology Co.,Ltd Address ......................................... : 4th floor, 49th Bldg, 5th Cuigang Industrial Zone, huaide, Fuyong, BaoAn, guangdong, shenzhen, China Test Specification Standard ........................................ : FCC CFR 47 PART 15 C(15.249): 2013 Test Report Form No. ................... : LCSEMC-1.0 TRF Originator ............................. : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF .................................. : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test Item Description. ................ : Dog training colla Trade Mark ................................... : Model/ Type reference.................. : AT-216 Ratings .......................................... : DC 9.0V Result ......................................... : Positive Compiled by: Supervised by: Approved by: Jacky Li/ File administrators Fox Zhang/ Technique principal Gavin Liang/ Manager SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: OFK-AT-216 Report No.: LCS1404160653E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 3 of 22 FCC -- TEST REPORT Type / Model........................... : AT-216 EUT......................................... : Dog training colla Applicant............................... : Shenzhen Aetertek Technology Co.,Ltd Address.................................. : 4th floor, 49th Bldg, 5th Cuigang Industrial Zone, huaide, Fuyong, BaoAn, guangdong, shenzhen, China Telephone............................... : / Fax.......................................... : / Manufacturer........................ : Shenzhen Aetertek Technology Co.,Ltd Address................................... : 4th floor, 49th Bldg, 5th Cuigang Industrial Zone, huaide, Fuyong, BaoAn, guangdong, shenzhen, China Telephone............................... : / Fax.......................................... : / Factory................................... : Shenzhen Aetertek Technology Co.,Ltd Address................................... : 4th floor, 49th Bldg, 5th Cuigang Industrial Zone, huaide, Fuyong, BaoAn, guangdong, shenzhen, China Telephone............................... : / Fax.......................................... : / Test Result Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Report No. : LCS1404160653E April 25, 2014 Date of issue SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: OFK-AT-216 Report No.: LCS1404160653E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 4 of 22 TABLE OF CONTENTS 1. GENERAL INFORMATION .................................................................................................... 5 1.1. Description of Device (EUT) ............................................................................................................. 5 1.2. Host System Configuration List and Details ...................................................................................... 5 1.3. External I/O ........................................................................................................................................ 5 1.4. Description of Test Facility ................................................................................................................ 6 1.5. Statement of the measurement uncertainty ......................................................................................... 6 1.6. Measurement Uncertainty .................................................................................................................. …

Text truncated - open the document above for the full version.

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: OFK-AT-216 Report No.: LCS1404160653E _______________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 1 1. TEST SETUP PHOTOGRAPHS 1.1 Photo Of Radiated Emission Measurement(X Position) Fig.1 Fig.2