OGGK3MF82SPEAKER

Model # PSP-2 Instruction Manual Instrucciones en español incluidas 8” RECHARGEABLE PARTY SPEAKER 2 TWS FUNCTION (1)TWS connection: TWS Connection is only for two speakers. (2)Turn on the Speakers , press the MODE button to switch to BT connection mode. (3)Please long press each unit’s TWS Button for about 3 seconds, then two speakers connected as a pair. (4)Connect the phone: Open the phone BT connection settings, Search and Connect the main device BT connection Name ‘ BB-B T-SP ’. (5)Select music from phone and enjoy TWS playing in pairs with two Speakers. (6)Exit TWS: Long press(almost 3 seconds) the TWS button on the device. Connecting to BLUETOOTH Bluetooth Mode: Open the Bluetooth of phone. Find the Bluetooth name of the unit called “BB-B T- SP”to connect. After a successful match, you can play the music from speaker. You won’t need reconnect the Bluetooth when switching mode. DISPLAY SYSTEM SETTINGS 1. Input Mode: The LED display screen will display the information of input mode for USB/MICRO SD input, the unit will automatically switch to USB/MICRO SD mode and 2.Track Number: The track number currently playing from the USB/MICRO SD will display. 3. FM Mode: All FM channels display here. Short press “play/pause” button for auto scan all channels. PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USING YOUR PAR- TY SPEAKER. KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. Your Speaker has an internal rechargeable battery. Improper usage may result in th e Speaker becoming hot, i gnite or b urst and cause injury if exposed to conditions of abuse. Be sure to follow th e sa fety warn- ings listed below: 1. Do not assemble, throw away or damage th e Party Speaker. 2. Store the Party Speaker in a dry p lace, keepin g it away f rom damp corrosi ve materials and e nvironments such as salt air. car during hot weather. Remember a closed car acts as a greenhouse allowin g th e inside temperatu re to p ossibly reach over 200F. 4. The Party Speaker is not a toy. Pleas e keep it out of th e reach of young children. Please do not discard this rechargeable device as trash. Consult your local was te collection agency for p roper disposalor recycling methods. You may also conta ct *Call2Re- ou. 4 Power ing up your speaker 1.Plug the micro USB plug into your speaker’s micro USB charging port 2. Plug the USB side of your cable into your computer or laptop’s USB charging port, or into a standard USB charger (not included) 3. Make certain that your computer or laptop is powered on, or the USB charger is p lugged in to b egin charging. 4. The Charging indicator LED light should illuminate RED when charging and then turn off when the battery is fully charged. FOR MAXIMUM BATTERY LIFE, IT IS IMPORTANT TO FULLY CHARGE YOUR BATTERY PRIOR TO USE. 5. Move the power switch to the ON position. The LED display should activate. 6.Adjust the volume control to the MIN position b efore connecting a device. 7.You’re now ready to connect your device! Connecting your w ired microphone 1.Connect your wired microphone using a ¼” cable into the Mic Input. 2.Make sure your microphone is in the ON position and talk normally. 3.Adjust the Mic Volume to your desired volume level. 4.Adjust the master volume as needed. Connecting your non-bluetooth device 1.Press the mode button until you see “AUX”in the LED sc reen. 2.You can connect most non-bluetooth devices using a 1/8” mini stereo cable. Plug this into the 1 /8” mini aux input. 3.Play the music from your device, and adjust the volume on your device to your desired level. 4.Adjust the master volume of your speaker to your desired level. Connecting your USB Device 1.Plug your USB stick or USB device into the USB interface 2.The mode should switch automatic ally to “USB Mode” 3.Your speaker should automatically play the first MP3 song on your USB device. 4.Adjust the volume as needed. 5.Press the Next , Previous , Play/Pause buttons as needed. 5 Connecting your TF Car d 1.Insert your TF Car d into the TF card interface. 2.The mode should switch automatically to “TF Mode” 4.Adjust the volume as needed. 5.Press the Next , Previous, Pla y/Pause buttons as needed. Recor ding onto your USB Device 1.Insert your USB Stick into the USB interface. 2.Long Press the RECORD button on your panel and start to record. 3.Pla y your music devices by long press the RECORD PLAY and use the microphone as needed and your vocals will be recorded from the wired and wireless microphones. 4.To stop recording by long press the RECORD PLAY button again. 5.Your recording is saved onto your USB device. Playing music from the built-in FM Radio 1.Press the MODE button until FM Radio appears on the LED screen. 2.Press and hold the Pla y/Pause button on your speaker, t o have the speaker scan all available FM radio stations in your area. 3.Adjust the volume as needed. About Rechargeable Batt eries Rechargeable lead-acid and lithium ion batt er ies are similar to what is used in your car today. I f you use your batt ery correctly and treat it well, then it can least for years. Here are some tips to get the longest life out of your rechargeable batt ery - mum batt ery life! 2.It is also recommended to charge the batt ery FULLY after each use. 3.It is OK to leave your speaker plugged in (charging) when not in use. The batt ery will not over -charge. 4.Do not store your batt ery in hot temperatures or moist areas. 5.If you are storing your batt ery for long periods of time, the charge may not store completely. I t is recommended to re-charge again fully before your next use. 6.It is recommended to charge your batt ery every few months. I f your batt ery is not charged for more then 6 months, it may need to be replaced. - 8.lf your batt ery does not charge, or does not keep the charge for long periods then it may need replacing. Please contact the service number for information on replac- ing your batt ery. 6 LIMITED WARRANTY ESI Cases & Accessories, Inc., warrants to the first consumer purchaser that this product, wh…

Text truncated - open the document above for the full version.

Model # PSP-2 Instrucciones en español 8” RECARGABLE ALTAVOZ DE FIESTA 10 PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USING YOUR PAR- TY SPEAKER. KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. Your Speaker has an internal rechargeable battery. Improper usage may result in th e Speaker becoming hot, i gnite or b urst and cause injury if exposed to conditions of abuse. Be sure to follow th e sa fety warn- ings listed below: 1. Do not assemble, throw away or damage th e Party Speaker. 2. Store the Party Speaker in a dry p lace, keepin g it away f rom damp corrosi ve materials and e nvironments such as salt air. car during hot weather. Remember a closed car acts as a greenhouse allowin g th e inside temperatu re to p ossibly reach over 200F. 4. The Party Speaker is not a toy. Pleas e keep it out of th e reach of young children. Please do not discard this rechargeable device as trash. Consult your local was te collection agency for p roper disposalor recycling methods. You may also conta ct *Call2Re- ou. FUNCION TWS (1) Conexión TWS: la conexión TWS es solo para dos altavoces. (2) Encienda los altavoces, presione el botón MODE para cambiar al modo de conexión BT. (3) Mantenga presionado el botón TWS de cada unidad durante aproximadamente 3 segundos, luego dos altavoces conectados como un par. nombre de la conexión BT del dispositivo principal “BB-B T-SP”. (5) Seleccione música del teléfono y disfrute de TWS jugando en parejas con dos altavoces. (6) Salir de TWS: mantenga presionado (casi 3 segundos) el botón TWS en el dispositivo. Conectando a BLUETOOTH Modo Bluetooth: abre el Bluetooth del teléfono. Busque el nombre de Bluetooth de la unidad llamada “BB-B T-SP” para conectarse. Después de un partido exitoso, puedes jugar La música del orador. No necesitará volver a conectar el Bluetooth cuando modo de conmutación CONFIGURACIÓN DEL SISTEMA DE VISUALIZACIÓN 1. Modo de entr ada: la pantalla LED mostrar á la información del modo de entr ada MICRO SD en la entr ada USB / MICRO SD, la unidad cambiará automáticamente al modo USB / MICRO SD y comenzará a reproducir archivos de audio Mp3 desde la 2. Número de pista: se mostrar á el número de pista que se está reproduciendo ac- tualmente desde el USB / MICRO SD. 3. Modo FM: aquí se muestran todos los canales FM. Presione brevemente el botón “reproducir / pausa” para escanear automáticamente todos los canales. 12 Encender tu altavoz 1.Enchufe el conector micro USB en el puerto de carga micro USB de su altavoz 2. Enchufe el lado USB de su cable en el puerto de carga USB de su computadora o computadora portá til , o en un cargador USB estándar (no incluido) 3. Asegúrese de que su computadora o computadora portá til esté encendida o que el cargador USB esté enchufado para comenzar a cargar. 4. La luz LED del indicador de carga debe iluminarse en ROJO durante la carga y luego apáguelo cuando la bater ía esté completamente cargada. PARA UNA VIDA MÁXIMA DE LA BATERÍA, ES IMPORTANTE CARGAR TOTALMENTE LA BATERÍA ANTES DE USARLA. 5. Mueva el inter ruptor de encendido a la posición ON. La pan- talla LED debería activarse. 6. Ajuste el contr ol de volumen a la posición MIN antes de conectar un dispositivo. 7.¡Ahora estás listo para conectar tu dispositivo! Conectar su micróf ono con cable 1.Conecte su micróf ono con cable con un cable de ¼ ”en la entr ada de micróf ono. 2. Asegúrese de que su micróf ono esté en la posición ON y hable normalmente. 3. Ajuste el volumen del micróf ono al nivel de volumen deseado. 4. Ajuste el volumen maestro según sea necesario . Conectar su dispositivo sin bluetooth 1.Presione el botón de modo hasta que vea “AUX” en la pantalla LE D. 2.Puede conectar la mayoría de los dispositivos que no son bluetooth utilizando un mini cable estér eo de 1/8 ”. Conéctelo a la entr ada auxiliar mini de 1/8 “. 3. Reproduzca la música desde su dispositivo y ajuste el volumen en su dispositivo a su nivel deseado. 4. Ajuste el volumen principal de su altavoz al nivel deseado. Conectar su dispositivo USB 1.Enchufe su dispositivo USB o dispositivo USB en la interfaz USB 2. El modo debería cambiar automáticamente a “Modo USB” 3. Su altavoz debe reproducir automáticamente la primera canción MP3 en su dis- positivo USB. 4. Ajuste el volumen según sea necesario . 5.Presione los botones Siguiente, Anter ior, Reproducir / Pausa según sea necesario . 13 Connecting your TF Car d 1.Inserte su tarjeta TF en la interfaz de la tarjeta TF. 2. El modo debería cambiar automáticamente al “Modo TF” 3. Su altavoz debe reproducir automáticamente la primera canción MP3 en su tarjeta TF. 4. Ajuste el volumen según sea necesario . 5.Presione los botones Siguiente, Anter ior, Reproducir / Pausa según sea necesario . Recor ding onto your USB Device 1.Inserte su memoria USB en la interfaz USB. 2.Mante nga presio nado e l b otón RECORD en su panel y comience a grabar. 3.Reproduzca sus dispositivos de música presionando prolongadamente RECORD PLAY y use el micrófono según sea necesario y su voz se grabará desde los micrófonos con cable e inalámbricos. 4. Par a detener la grabación, presione nuevamente el botó n RECORD PLAY. 5. Su grabación se guarda en su dispositivo USB. Playing music from the built-in FM Radio 1.Presione el botón MODE hasta que aparezca Radio FM en la pantalla LED. 2. Mantenga presionado el botón Reproducir / Pausa en su altavoz para que el al- ta voz explore todas las estaciones de radio FM disponibles en su área. 3. Ajuste el volumen según sea necesario . About Rechargeable Batt eries Las bater ías recargables de plomo-ácido y de iones de litio son similares a las que se usan hoy en su automóvil. Si usa la bater ía correctamente y la trata bien, e ntonces puede durar menos años. Aquí hay algunos consejos para aprovechar al máximo su bater ía recargable. - TANTE para una vida útil máxima de la bater ía! 2. También se recomienda cargar la bater ía COMPLETAMENTE después de cada uso. 3. Está bien dejar el altavoz enchufado (cargando) cuando no esté en uso. La ba…

Text truncated - open the document above for the full version.

< GUANGZHOU PANYU MINFU SPEAKER FACTORY > Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD21046 Date: 2020-05-11 Subject; Request for Long Term Confidentiality FCC ID: OGGK3MF82 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Pan FuXin Title: Manager

Test model number: PSP-2

OGGK3MF82

Model No.: PSP-2 Label location

Test model number: PSP-2

Global United Technology Services Co., Ltd. Report No.: GTS202004000181F01 + TEST REPORT Applicant: GUANGZHOU PANYU MINFU SPEAKER FACTORY Address of Applicant: DONG SHENG SAN HENG RD., CHADONG, SHIJI, PANYU DIS, GUANGZHOU, China Manufacturer/Factory: GUANGZHOU PANYU MINFU SPEAKER FACTORY Address of Manufacturer/Factory: DONG SHENG SAN HENG RD., CHADONG, SHIJI, PANYU DIS, GUANGZHOU, China Equipment Under Test (EUT) Product Name: SPEAKER Model No.: PSP-2 Trade Mark: Billboard FCC ID: OGGK3MF82 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.249 Date of sample receipt: April 24, 2020 Date of Test: April 24-28, 2020 Date of report issued: April 28, 2020 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Authorized Signature: Robinson Lo Laboratory Manager This results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Page 1 of 28 Report No.: GTS202004000181F01 2 Version Version No. Date Description 00 April 28, 2020 Original Prepared By: Date: April 28, 2020 Project Engineer Check By: Date: April 28, 2020 Reviewer Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 28 Report No.: GTS202004000181F01 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 VERSION .................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................. 3 4 TEST SUMMARY ..................................................................................................................................... 4 4.1 MEASUREMENT UNCERTAINTY ............................................................................................................ 4 5 GENERAL INFORMATION ...................................................................................................................... 5 5.1 GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 5.2 TEST MODE ........................................................................................................................................ 7 5.3 DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 7 5.4 DEVIATION FROM STANDARDS ............................................................................................................. 7 5.5 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................... 7 5.6 TEST FACILITY .................................................................................................................................... 8 5.7 TEST LOCATION ................................................................................................................................. 8 5.8 ADDITIONAL INSTRUCTIONS ................................................................................................................. 8 6 TEST INSTRUMENTS LIST ..................................................................................................................... 9 7 TEST RESULTS AND MEASUREMENT DATA .................................................................................... 11 7.1 ANTENNA REQUIREMENT ................................................................................................................... 11 7.2 CONDUCTED EMISSIONS ................................................................................................................... 12 7.3 RADIATED EMISSION METHOD ........................................................................................................... 15 7.3.1 Field Strength of The Fundamental Signal ................................................................................ 17 7.3.2 Spurious emissions .................................................................................................................... 18 7.3.3 Bandedge emissions.................................................................................................................. 23 7.4 20DB OCCUPY BANDWIDTH .............................................................................................................. 25 8 TEST SETUP PHOTO ............................................................................................................................ 28 9 EUT CONSTRUCTIONAL DETAILS ..................................................................................................... 28 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 28 Report No.: GTS202004000181F01 4 Test Summary Test Item Section in CFR 47 Result Antenna requirement 15.203 Pass AC Power Line Conducted Emission 15.207 Pass Field strength of the fundamental signal 15.249 (a) Pass Spurious emissions 15.249 (a) (d)/15.209 Pass Band edge 15.249 (d)/15.205 Pass 20dB Occupied Bandwidth 15.215 (c) Pass Pass: The EUT complies with the essential requirements in the standard. Remark ：Test according to ANSI C63.10:2013. 4.1 Measurement Uncertainty Test Item Frequency Range Measuremen…

Text truncated - open the document above for the full version.

Global United Technology Services Co., Ltd. Report No.: GGTS202004000181F02 TEST REPORT Applicant: GUANGZHOU PANYU MINFU SPEAKER FACTORY Address of Applicant: DONG SHENG SAN HENG RD., CHADONG, SHIJI, PANYU DIS, GUANGZHOU, China Manufacturer/Factory: GUANGZHOU PANYU MINFU SPEAKER FACTORY Address of Manufacturer/Factory: DONG SHENG SAN HENG RD., CHADONG, SHIJI, PANYU DIS, GUANGZHOU, China Equipment Under Test (EUT) Product Name: SPEAKER Model No.: PSP-2 Trade Mark: Billboard FCC ID: OGGK3MF82 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.249 Date of sample receipt: April 24, 2020 Date of Test: April 24-28, 2020 Date of report issued: April 28, 2020 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Authorized Signature: Robinson Lo Laboratory Manager This results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Page 1 of 26 Report No.: GTS202004000181F02 2 Version Version No. Date Description 00 April 28, 2020 Original Prepared By: Date: April 28, 2020 Project Engineer Check By: Date: April 28, 2020 Reviewer Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 26 Report No.: GTS202004000181F02 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 VERSION .................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................. 3 4 TEST SUMMARY ..................................................................................................................................... 4 4.1 MEASUREMENT UNCERTAINTY ............................................................................................................ 4 5 GENERAL INFORMATION ...................................................................................................................... 5 5.1 GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 5.2 TEST MODE ........................................................................................................................................ 7 5.3 DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 7 5.4 DEVIATION FROM STANDARDS ............................................................................................................. 7 5.5 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................... 7 5.6 TEST FACILITY .................................................................................................................................... 7 5.7 TEST LOCATION ................................................................................................................................. 7 5.8 ADDITIONAL INSTRUCTIONS ................................................................................................................. 7 6 TEST INSTRUMENTS LIST ..................................................................................................................... 8 7 TEST RESULTS AND MEASUREMENT DATA .................................................................................... 10 7.1 ANTENNA REQUIREMENT ................................................................................................................... 10 7.2 CONDUCTED EMISSIONS ................................................................................................................... 11 7.3 RADIATED EMISSION METHOD ........................................................................................................... 14 7.3.1 Field Strength of The Fundamental Signal ................................................................................ 16 7.3.2 Spurious emissions .................................................................................................................... 17 7.3.3 Bandedge emissions.................................................................................................................. 22 7.4 20DB OCCUPY BANDWIDTH .............................................................................................................. 24 8 TEST SETUP PHOTO ............................................................................................................................ 26 9 EUT CONSTRUCTIONAL DETAILS ..................................................................................................... 26 Global United Technology Services Co., Ltd. No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 26 Report No.: GTS202004000181F02 4 Test Summary Test Item Section in CFR 47 Result Antenna requirement 15.203 Pass AC Power Line Conducted Emission 15.207 Pass Field strength of the fundamental signal 15.249 (a) Pass Spurious emissions 15.249 (a) (d)/15.209 Pass Band edge 15.249 (d)/15.205 Pass 20dB Occupied Bandwidth 15.215 (c) Pass Remarks: 1. Test according to ANSI C63.10: 2013. 2. Pass: The EUT complies with the essential requirements in the standard. 4.1 Measurement Uncertainty Test Item Frequency Range Mea…

Text truncated - open the document above for the full version.

Test model number: PSP-2 Radiated Emission Conducted Emission