ONACTF901NPager Receiver

FLEX NUMERIC PAGER CTF-903N MICRO FLX USER’S GUIDE AIRBANK,INC. POWER ON/OFF Press the button and the button at the same time Till the pager starts up. To turn the page off, Press the button and button at the same time for two seconds. To turn the page on, press the button and button at the same time for two seconds. READING MESSAGE In case being an unread message, “UNREAD” is displayed on the LCD Screen. And the pager will beep once every two minutes for 30 minutes.
REMINDER BEEP Press the button to read a message. Press the button to read a message receipt In case being no message receipt, “NO PAGE” is displayed. If there is no message and no message is stored “NO PAGE” is displayed When you press the button,. If there is a message, the message number-day-time of the message receipt is displayed during pressing the button. And the message is displayed after releasing the button. Number Day Time stamp Press the button to read remained message. If the message contains more than 15 character, the mark is displayed. And then press the button to read remained message Press the button to read the next message(s). Also, if a message receipt contains less than 15 characters, the next message is displayed when you press the button TONE ONLY “TONE ONLY” is displayed when it received a call without any message or is called by machinery telephone. DUPLCATE MESSAGE When it received the same message repeatedly, the mark is displayed on the LCD screen and the first message will be deleted automatically. FUNCTION MENU OPERATION. If you press the button after reading a message, “PROTECT ?” is displayed. Press the button to protect a message. Press the button to change to “delete function” Mode Press the button on the protect function mode to protect a message. after pressing the button. “PROTECTED” is displayed on the LCD Screen with icon. A message receipt is protected. If you press the button one more time, “DELETE ONE ?” is displayed on the LCD Screen. Press the button to delete a message. Press the button to change to “protect function” mode “DELETED ONE” is displayed and the function is on activation. A message receipt is deleted. If the reading message is already protected, “UNPROTECT ?” is displayed on the LCD Screen Press the button to cancel the protecting Function. If you press the button, ”UNPROTECTED” is displayed and the protect function is canceled. And then press the button to go back to the delete function. if you do not cancel the protect function, it is impossible to delete a protected message. It displays that “protect function” is canceled. If you want to select the delete function again, Press the button. THE OTHER FUNCTIONS If you press the button, “ALERT SEL ?” is displayed on the LCD screen and then, whenever you press the button, ALERT SEL ?, TIME SET ?, ALARM SET ?, AUTO-P SET ?, DELETE ALL ? Will be displayed on LCD Screen sequentially. Press the button to activate the function mode wanted. Press the button to select the other functions. RECEIVING MODE SET If you press the button on “ALERT SEL ?” function, the present alert mode is displayed. Press the button to select alert type (Beep, Motor, Silent). Press the button to activate it. ALERT SEL If you press the button on “BEEP ?” function, the present tone type is displayed. and then, whenever you press the button, the tone type is changed and beeping out.
The mode procedure is as follows. Tone-1 to tone-7, Melody-1 to Melody-7
icon is displayed on the LCD screen after setting the melody alert. Whenever you press the button once, the alert mode is changed from Tone-1 to Melody-7. Press the button to select a favorable one. TONE LENGTH SEL When the alert tone is activated, the tone length is displayed if you press the button and you can choose the tone length by pressing the button. Whenever you press the button the tone length changes from Long-1 to Long-3.
Three different tone length is as follows. Press the button to select a favorable one. Long-1(8seconds), Long-2(12seconds), Long-3(16seconds), TIME SET If you press the button on “TIME SET ?” mode, And when you press the button, “month/date/hour/minutes/AM/PM” is blinking by turns. During displaying the “date/hour/minutes/AM/PM”, press the button for adjusting time, alarm and date. After finishing all settings, press the button to Press the button to set time. complete settings. Press the button to change the blinking “month” Press the button to move the cursor to “date” Press the button to change the blinking “date” Press the button to move the cursor to “hour” Press the button to set the blinking “hour” Press the button to move the cursor to “minutes” Press the button set the blinking “minutes” Press the button to move the cursor to “AM/PM”. Press the button changing the blinking “AM/PM” Press the button to finish setting.
Automatic back lighting function is on activation from 6:00 PM to 6:00 AM everyday, therefore you have to set time correctly. GPS TIME ON/OFF If you press the button after setting AM/PM, “GPS ON ?” mode is displayed. Whenever you press the button, the mode changes. To activate it, press button again. Press the button to toggle ”GPS ON”, ”GPS OFF”. Press the button to activate it.
GPS(Automatic Time Correction) This function is to correct present time exactly and automatically by GPS(Global Positioning System) ALARM SET If you press the button on “ALARM SET ?” mode, the present alarm mode is blinking. and then whenever you press the button, mode toggles will be displayed as follows. “ALARM ON ?”, “ALARM OFF ?” Press the button to set “ALARM ON/OFF” mode, Press the button to set alarm function. Setting alarm function is on activation with icon. Then set time by pressing button. Then press the button to confirm. Press the button to toggle “ALARM ON ?”, “ALARM OFF ?” Press the button to activate it. After setting “ALARM OFF”, icon is disappeared Setting alarm time is same as the above “TIME SET”. SET AUTO POWER ON/OFF If you press the button on “AUT…

Text truncated - open the document above for the full version.

EXTERNAL TOP SIDE EXTERNAL BOTTOM SIDE FCC ID : ONACTF901N

PROPOSED FCC ID. LABEL AND MARKING BOTTOM SIDE

INTERNAL TOP SIDE INTERNAL BOTTOM SIDE FCC ID : ONACTF901N INTERNAL TOP SIDE INTERNAL BOTTOM SIDE FCC ID : ONACTF901N FCC ID : ONACTF901N FCC ID : ONACTF901N

KTL Korea Testing Laboratory 1 Page of 10 TEST REPORT This test report only responds to the tested sample and shall not be reproduced except in full without written approval of the Korea Testing Laboratory. Tested and reported by Reviewed by Soun-Kweon Seol , Senior Engineer Seok-Jin Kim , EMC Team Leader KOREA TESTING LABORATORY FG101-01-02-00 222-13, Guro-Dong Guro-Gu Seoul Korea 152-053 http://www.ktl.re.kr Ref. Report No. 99-341-035 Name and address of the applicant Comtex Telecom Co., Ltd. Kwanglim Bldg. 201, 218-26,Poi-Dong, Kangnam-Ku, Seoul, Korea 135-260 Standard / Test regulation FCC Part 15, Subpart B Test result Pass Incoming date : July 7, 1999 Test item(s) ; Communications Receiver (Pager Receiver) Model/type ref. ; CTF-903 Manufacturer ; Comtex Telecom Co.,Ltd. Additional information ; -Required Authorization :Certification -FCC ID. : ONACTF901N Test date : July 10, 1999 Issue date : July 22, 1999 Ref. Report No. 99-341 - 035 2 Page of 10 TABLE OF CONTENTS I. GENERAL INFORMATION ............................................................................................................ 3 1. Grantee Name and Mailing Address 2. Manufacturer's Name and Mailing Address 3. Equipment Descriptions 4. Rules and Regulations 5. Measuring Procedure 6. Date of Measurement . GENERAL REQUIREMENTS OF THE EUT .................................................................4 1. Labelling Requirement (Section 15.19) 2. Information to User (Sections 15.21) 3. Special Accessories (Section 15.27) . RADIATED EMISSION MEASUREMENT (Section 15.109) ........................................................... 5-9 1. Test Procedure 2. Photograph for the worst case configuration 3. Sample Calculation 4. Measurement Data . TEST EQUIPMENTS USED FOR MEASUREMENT..................................................................10 Ref. Report No. 99 - 341 - 035 3 Page of 10 . GENERAL INFORMATION 1. Grantee Name and : Comtex Telecom Co., Ltd. Mailing Address Kwanglim Bldg. 201, 218-26, Poi-Dong, Kangnam-Ku, Seoul, Korea 135-260 2. Manufacturer's Name and: Comtex Telecom Co., Ltd. Mailing Address Kwanglim Bldg. 201, 218-26, Poi-Dong, Kangnam-Ku, Seoul, Korea 135-260 3. Equipment Descriptions 3.1 Tuning Frequency : 929.000MHz ~ 932.000MHz (25kHz Spacing) 3.2 Detect Method : Superheterodyne Detector 3.3 Local Oscillator: 1st Local Osc. Frequency = Tuning Frequency - 21.4MHz(1st IF) 2nd Local Osc. Frequency = 20.945MHz (2nd IF : 455kHz) 3.4 Used Crystal: 1st Local Crystal = 1st Local Osc. Frequency/12 2nd Local Crystal = 20.945MHz 3.5 Power Supply : DC 1.5V (Battery) 4. Rules and Regulations: FCC Part 15, Subpart B 5. Measuring Procedure: ANSI C63.4-1992 6. Date of Measurement 6.1 Line Conducted: Not Applicable 6.2 Radiated Emission : July 10, 1999 Ref. Report No. 99 - 341 - 035 4 Page of 10 . GENERAL REQUIREMENTS OF THE EUT 1. Labelling Requirement (Section 15.19) This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. 1.1 Location on Enclosure : Manual for Installation and Operating Instruction 1.2 How Applied : Printing 2. Information to User (Section 15.21) The following or similar statements were provided in the manual for user instruction. Please refer page 7 of the attached manual for details. CAUTION : Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 3. Special Accessories (Section 15.27) 3.1 Were the special Accessories provided? [ ] yes, [ x ] no 3.2 If yes, details for the special accessories are as follows : 3.3 If yes, were the appropriate instructions provided on the first page of the text concerned with the device? [ ] yes, [ ] no 3.4 Are these accessories provided of the type which can be readily obtained from multiple retail outlets ? [ ] yes, [ ] no And therefore does the manual specify what additional components or accessories are required to used in order to comply with the Rules? [ ] yes, [ ] no Ref. Report No. 99 - 341 - 035 5 Page of 10 . RADIATED EMISSION MEASUREMENT (Section 15.109) 1. Test Procedure 1.1 Preliminary Testing for Reference This pager receiver(EUT) is designed to operate in the band 929.000MHz to 932.000MHz by changing a local oscillator installed in internal PCB. According to section 15.31(m), the measurements were performed with three equipments which were selected as bottom, middle, and top frequency in the operating band. Preliminary testing was performed in a KTL absorber-lined room to determine the emission characteristics of the EUT. The EUT was placed on the wooden table which has dimensions of 0.8 meters in height, 1 meter in length and 1.5 meters in width. Receiving antenna(Biconical antenna : 30 to 300MHz, Log-periodic antenna : 200 to 1000MHz or Horn Antenna : 1 to 18GHz) was placed at the distance of 1 meter from the EUT. An attempt was made to maximize the emission level with the various configurations of the EUT while rotating the table and varying antenna height. Emissions level from the EUT with various configurations were examined on a Spectrum Analyzer connected with a RF amplifier and graphed by a plotter. 1.2 Final Radiated Emission Test at a Absorber-Lined Room The final measurement of radiated field strength was carried out in a KTL Absorber-Lined Room that was listed up at FCC according to the "Radiated Emissions Testing" procedure specified by ANSI C63.4. Based on the test results in preliminary test, measurement was made in same test set up and configuration which produced maximum emission level. Receiving antenna was installed at 3-meter distance from the EUT, and was connected to an EMI receiver or spectrum analyzer(for above 1GHz) with a RF amplifier. Turntable was rotated through 360 degrees and receiving antenna height was varied from 1 to 4 meters above the ground plane to read maximum emission level. If neces…

Text truncated - open the document above for the full version.

TEST SETUP PHOTOS RADIATED EMISSION