OTA83436HERO PORTAL-HTTYD

Mild Fantasy Violence Hero Portal ™ DreamWorks Dragons Figures only work with the Hero Portal ™ DreamWorks Dragons Game System. FOR SET-UP: (ADULT INSTALLATION REQUIRED) 1. Battery installation: Locate the battery compartment on the bottom side of the portal. Using a Phillips Head screwdriver, remove the screw and the battery door. Install fresh batteries, matching polarity icons with those on the unit. Replace the battery compartment and the screw. 2. Unit Connection: Connect unit to TV, VCR or DVD player and select the appropriate “line in” source. Consult the audio/video device's manual for details. GAME PLAY: 6 STAGES, 18 MISSIONS Flap, glide and blast! Find the Hero gates and unlock sub-levels for 6 different types of play. Battle through waves of enemy dragons, collect dragon eggs and challenge yourself to reach 100% completion. FIGURE 1 FIGURE 2 CONTROLLER PORTAL A/V CABLE If you experience further difficulties, reset the PORTAL by turning it OFF and ON again or consult the audio/video device’s manual to troubleshoot. If you experience screen problems such as horizontal lines, distorted graphics, ghosting or fading, batteries may need to be changed. Before replacing batteries, turn power off and disconnect the AV cable from the TV. VIDEO GAME Requires 4 “AA” alkaline batteries (not included) DreamWorks Dragons © 2014 DreamWorks Animation L.L.C. TM & © 2014 MANUFACTURED BY JAKKS PACIFIC, INC., 22619 PCH, MALIBU, CA, 90265 U.S.A. All other symbols, marks, logos, and designs (collectively “Trademarks”) are Trademarks of and proprietary to their respective owners and used under license. MADE IN CHINA. Contents may vary in style, color, shape and decoration from images shown on package or in advertising. Questions or comments? www.jakks.com, [email protected], or 1-877-875-2557 in North America. Developed by HotGen Ltd London. The ratings icon is a trademark of the Entertainment Software Association. ATTENTION! Remove and discard packaging ties and fasteners before giving toy to child. IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 8. Only use attachments/accessories specified by the manufacturer. 9. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio / TV technician for help. Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits. SEIZURE WARNING: A small percentage of individuals may experience epileptic seizures when exposed to certain light patterns or flashing lights. Exposure to certain patterns or backgrounds on a television screen or while playing video games, including games played on the TV Games unit, may induce an epileptic seizure in these individuals. Certain conditions may induce previously undetected epileptic seizure or symptoms in these individuals or in persons who have no history of prior seizures or epilepsy. If you or anyone in your family has an epileptic condition, consult your physician prior to playing. If you or anyone in your family experience any of the following symptoms while playing a video game — dizziness, altered vision, eye or muscle twitches, loss of awareness, disorientation, any involuntary movement or convulsions — IMMEDIATELY discontinue use and consult your physician before resuming play. -To reduce the likelihood of a seizure while playing video games: 1. Sit or stand as far from the screen as possible. 2. Play video games in a well-lit room and on the smallest available screen. 3. Do not play if you are tired. 4. Take a 10 to 15 minute break every hour. REPETITIVE STRAIN WARNING: Playing video games continuously can make your muscles, joints or skin hurt after a few hours. To avoid problems such as Tendonitis, Carpel Tunnel Syndrome or skin irritation: 1. Take a 10 to 15 minute break every hour, even if you don’t think you need it. 2. If your hands, wrists or arms become tired or sore while playing, stop and rest them for several hours before playing again. 3. If you…

Text truncated - open the document above for the full version.

Revision: 080408A Request of Confidentiality 08/20/2014 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: OTA83436 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. Best Regards ------------------------------------------------------------------- Name : Dick Au Title : Senior Manager, Product Integrity Tel.: 22697631 Fax: 23111386 Mail:[email protected]

Revision: 080408A Power of Attorney 08/20/2014 To whom it may concern: We, the undersigned, JAKKS Pacific(HK) Ltd, hereby authorize Bureau Veritas (Hong Kong) Limited, Mr, Keith Yeung to act on our behalf in all matters relating to all processes required in the FCC part 15 approval and any communication needed with the national authority. Any and all acts carried out by Bureau Veritas (Hong Kong) Limited on our behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please do not hesitate to contact us. Thank you! Sincerely yours, ------------------------------------------------------------------- Name : Dick Au Title : Seniotr Manager, Product Integrity Tel.: 22697631 Fax: 23111386 Mail: [email protected] Date : 08/20/2014

This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions :(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Manufactured by: JAKKS Pacific lnc., 22619 PCH, Malibu, CA 90265 U.S.A. MADE IN CHINA © 2014 JAKKS 36.4mm 2.1mm 46.1mm 2.1mm FCC ID:OTA83436 2.0mm 15mm 52mm 2mm 54mm DreamWorks Dragons © 2014 DreamWorks Animation L.L.C. DreamWorks Dragons © 2014 DreamWorks Animation L.L.C. IC: 7783A-83436 MODEL: 83436 2.0mm

TEST REPORT No: (5214)233-0874 BUREAU VERITAS HONG KONG LIMITED – Kowloon Bay Office 1/F Pacific Trade Centre, 2 Kai Hing Road, Kowloon Bay, Kowloon,HONG KONG Tel: +852 2331 0888 Fax: +852 2331 0889 www.cps.bureauveritas.com This report is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. Our report is limited to the test samples identified herein. The results set forth in this report are not necessarily indicative or representative of the statistical quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof. You shall have thirty days from receipt of this report to request additional testing of the samples or to notify us of any errors or omissions relating to our report, provided, however, such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Page 1 of 16 TEST REPORT To: JAKKS PACIFIC (H.K.) LIMITED To: - Attn: Horace Chau / Kin Yiu / Jessica Ho Attn: - Address: 12/F, Wharf T&T Centre, 7 Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong. Address: - Fax: -- Fax: - E-mail: [email protected] / [email protected] / [email protected] E-mail: - Folder No.: -- Factory name: ROOTLAND PLASTIC FACTORY Location: -- Product: HERO PORTAL-HTTYD / HERO PORTAL-HTTYD Booster Pack (Colud Jumper and Meatlug) / HERO PORTAL- HTTYD Booster (Barf/ Belch and Hookfang) Model No.: 83436, 83461, 83462 Sample No: (5214)233-0874 Test Date(s): August 14, 2014 to August 18, 2014 Test Requested: FCC Part 15 – 2012 Test Method: ANSI C63.4 – 2009 FCC ID: OTA83436 The results given in this report are related to the tested specimen of the described electrical apparatus. CONCLUSION: The submitted sample was found to COMPLY with requirement of FCC Part 15 Subpart C. Authorized Signature: Reviewed by: Keith Yeung Approved by: Steven Tsang Date: August 27, 2014 Date: August 27, 2014 TEST REPORT No: (5214)233-0874 BUREAU VERITAS HONG KONG LIMITED – Kowloon Bay Office 1/F Pacific Trade Centre, 2 Kai Hing Road, Kowloon Bay, Kowloon,HONG KONG Tel: +852 2331 0888 Fax: +852 2331 0889 www.cps.bureauveritas.com This report is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. Our report is limited to the test samples identified herein. The results set forth in this report are not necessarily indicative or representative of the statistical quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof. You shall have thirty days from receipt of this report to request additional testing of the samples or to notify us of any errors or omissions relating to our report, provided, however, such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Page 2 of 16 Test Result Summary EMISSION TEST Test requirement: FCC Part 15 - 2012 Test Condition Test Method Test Result Pass Failed Radiated Emission Test, 9kHz to 1GHz ANSI C63.4 Frequency range of Fundamental Emission ANSI C63.4 26dB Bandwidth of Fundamental Emission ANSI C63.4 Frequency Drift ANSI C63.4 Report Revision & Sample Re-submit History: -- TEST REPORT No: (5214)233-0874 BUREAU VERITAS HONG KONG LIMITED – Kowloon Bay Office 1/F Pacific Trade Centre, 2 Kai Hing Road, Kowloon Bay, Kowloon,HONG KONG Tel: +852 2331 0888 Fax: +852 2331 0889 www.cps.bureauveritas.com This report is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. Our report is limited to the test samples identified herein. The results set forth in this report are not necessarily indicative or representative of the statistical quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof. You shall have thirty days from receipt of this report to request additional testing of the samples or to notify us of any errors or omissions relating to our report, provided, however, such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Page 3 of 16 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. NO. PRODUCT BRAND MODEL NO. SERIAL NO. 1 TELEVISION LG M197WAJ 905KCRN07566 NOTE: All power cords of the above support units are non-shielded (1.8m). TEST REPORT No: (5214)233-0874 BUREAU VERITAS HONG KONG LIMITED – Kowloon Bay Office 1/F Pacific Trade Centre, 2 Kai Hing Road, Kowloon Bay, Kowloon,HONG KONG Tel: +852 2331 0888 Fax: +852 2331 0889 www.cps.bureauveritas.com This report is intended for …

Text truncated - open the document above for the full version.