OTARC73635T49XPV AEROPLANE

TEST REPORT Report No. : AG013533-001 Date : 2006 June 16 Page 1 of 11 FCC ID: OTARC73635T49 This document shall not be reproduced except in full or with written approval by the laboratory. CMA Industrial Development Foundation Limited Room 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: [email protected] Web Site: http://www.cmatcl.com Application No. : LG211861(8) Applicant : Jakks Pacific (HK) Ltd Rm 718 West Wing office Building, New World Centre, 20 Salisbury Road, Tsimshatsui, Kowloon, Hong Kong Sample Description : One(1) submitted sample(s) stated to be XPV Aeroplane of Model No. 73635 Rating : 6 x 1.5V AAA size batteries No. of submitted sample : Three (3) piece(s) *** Date Received : 2006 May 23 Test Period : 2006 May 26 – 2006 June 12 Test Requested : FCC Part 15 Certification. Test Method : 47 CFR Part 15 (10-1-05 Edition) ANSI C63.4 – 2003 Test Result : See attached sheet(s) from page 2 to 11. Conclusion : The submitted sample was found to comply with requirement of FCC Part 15 Subpart C. For and on behalf of CMA Industrial Development Foundation Limited Authorized Signature : ____________________________________________________ Danny Chui Deputy Manager - EL. Division TEST REPORT Report No. : AG013533-001 Date : 2006 June 16 Page 2 of 11 FCC ID: OTARC73635T49 This document shall not be reproduced except in full or with written approval by the laboratory. CMA Industrial Development Foundation Limited Room 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: [email protected] Web Site: http://www.cmatcl.com Table of Contents 1 General Information............................................................................................................................. 3 1.1 General Description ..................................................................................................................... 3 1.2 Location of the test site ................................................................................................................ 4 1.3 List of measuring equipment........................................................................................................ 5 2 Description of the radiated emission test ............................................................................................. 6 2.1 Test Procedure ............................................................................................................................. 6 2.2 Test Result ................................................................................................................................... 6 2.3 Radiated Emission Measurement Data ........................................................................................ 7 3 Description of the Line-conducted Test............................................................................................... 8 3.1 Test Procedure ............................................................................................................................. 8 3.2 Test Result ................................................................................................................................... 8 3.3 Graph and Table of Conducted Emission Measurement Data ..................................................... 8 4 Photograph ........................................................................................................................................... 9 4.1 Photographs of the Test Setup for Radiated Emission and Conduction Emission....................... 9 4.2 Photographs of the External and Internal Configurations of the EUT......................................... 9 5 Supplementary document................................................................................................................... 10 5.1 Bandwidth .................................................................................................................................. 10 5.2 Duty cycle .................................................................................................................................. 10 5.3 Transmission time ...................................................................................................................... 10 6 Appendices......................................................................................................................................... 11 TEST REPORT Report No. : AG013533-001 Date : 2006 June 16 Page 3 of 11 FCC ID: OTARC73635T49 This document shall not be reproduced except in full or with written approval by the laboratory. CMA Industrial Development Foundation Limited Room 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: [email protected] Web Site: http://www.cmatcl.com 1 General Information 1.1 General Description The equipment under test (EUT) is a transmitter for XPV Aeroplane. It is operate at 49.860MHz which is controlled by a crystal. The EUT is powered by 6 x 1.5V AAA size batteries. There are two control trigger in the EUT. When the forward, turn left, turn right and landing trigger is pressed once. It will transmit radio signal to receiver unit. The brief circuit description is listed as follows: - U1, Q1 and associated circuit act as encoder. - Q3 and associated circuit act as RF amplify. - Q4, Q2, Y2 and associated circuit act as oscillation. - Q7, Q8 and associated circuit act as voltage control. TEST REPORT Report No. : AG013533-001 Date : 2006 June 16 Page 4 of 11 FCC ID: OTARC73635T49 This document shall not be reproduced except in full or with written approval by the laboratory. CMA Industrial Development Foundation Limited Room 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: [email protected] Web Site: http://www.cmatcl.com 1…

Text truncated - open the document above for the full version.