OWT-CEU5000BTBluetooth Hi Fi Music System with Light Effects

Stereo Mini System INSTRUCTION MANUAL CEU5000-BT Thank you for purchasing this Stereo Mini System. Please read this instruction manual carefully before using this product to ensure proper use. Keep this manual in a safe place for future reference. www.AKAI-USA.com C A UTION:T O P R EVENT T H E R I SK O F ELECTRIC SHOCK, DO NOT REMOV E COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING T O QUALIFIED PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. This symbol is intended to alert you to the presence of uninsulated dangerous voltage within the product’s enclosure that might be of sufficient magnitude to constitute a risk of electric shock. Do not open the product’s case. This symbol is intended to inform you t h at important operating and maintenance instructions are included in the literature accompanying this product. DRIPPING WARNING The product shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the product. VENTILATION WARNING The normal ventilation of the product shall not be impeded for intended use. Warning:Changes or modif ications to this unit not expressly approved by the party responsible for This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference recieved, including interference that may cause undesired operation. compliance could void the user’s authority to operate the equipment. Class ll equipment symbol This symbol indicates that the power adaptor has a double insulation system. This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Installer must ensure that 20 cm separation distance will be maintained between the device and user. FCC RADIATION EXPOSURE STATEMENT DECLARATION DE LA FCC RELATIVE A L'EXPOSITION AU RAYONNEMENT Cet appareil est conforme aux limites d'exposition au rayonnement RF stipulées par la FCC pour une utilisation dans un environnement non contrôlé. Les antenne utilisées pour cet émetteur doivent être installées et doivent fonctionner à au moins 20 cm de distance des utilisateurs et ne doivent pas être placées près d’ autres antennes ou émetteurs ou fonctionner avec ceux-ci. Les installateurs doivent s'assurer qu’une distance de 20 cm sépare l’appareil des utilisateurs. FCC ID: OWT-CEU5000BT EN - 1 NOTE: This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of Industry Canada. Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de Classe B prescrites dans le règlement sur le brouillage radioélectrique édicté par Industrie Canada. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television (which can be determined by turning the equipment off), the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connecttheequipment into anoutletona circuitdifferent from that to which the receiver is connected. Consult the dealer or an experienced / TV technician for help. EN - 2 1. Read these Instructions. 2. Keep these Instructions. 3. Heed all Warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (in cluding amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or groundin g - type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11.Only use attachment s/accessories specified by the manufacturer. 12.Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Portable Cart Warning 13. Unplug this apparatus during lig htning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture , does not operate normally, or has been dropped. To reduce the ri…

Text truncated - open the document above for the full version.

香港新界沙田火炭坳背灣街26-28號富騰工業中心17字樓1704室 Room 1704, 17/F, Fo Tan Industrial Center, 26-28 Au Pui Wan Street, Fo Tan, Shatin, N.T. Tel: +852 3188 2618 Fax: +852 3188 1060 Letter of Agency "I, an officer of (Arts Digital Technology(HK) Limited) do hereby authorize Intertek Testing Services (Mr. Terry Chan / Koo Wai Ip / Kenneth Wong) to act on our behalf in front of the Federal Communications Commission with respect to all matters relating to certification of equipment under Part 15 and Part 18 of the FCC Rules until further notice." I further certify that no party (as defined in §1.2002(b) of CFR 47, 2004) to this application, including myself, is subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.,862. Dated this 13 day May of 2015 By Signature Dora Lee Printed Name Merchandising Manager Title Remark: The person who signs this authorization letter must be the grantee contact of record in the Grantee Code data base.

香港新界沙田火炭坳背灣街26-28號富騰工業中心17字樓1704室 Room 1704, 17/F, Fo Tan Industrial Center, 26-2 8 Au Pui Wan Street, Fo Tan, Shatin, N.T. Tel: +852 3188 2618 Fax: +852 3188 1060 Attention: Application Examiner Re: Request for confidentiality Applicant: Arts Digital Technology (HK) Ltd FCC ID: [OWT-CEU5000BT] To whom it may concern, Permanent Confidentiality[Complete this section if permanent confidentiality is requested] Request is hereby submitted by Arts Digital Technology (HK) Ltd. to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: [Select one or more of items below, as appropriate] • Schematics • Detailed Block diagrams • Detailed Operational/Functional Description Short-term Confidentiality [Complete this section if short-term confidentiality is requested] Request is hereby submitted by {Your company name] to withhold from public review for a period of 45 days from the date of the Grant of Equipment Authorization and prior to marketing, certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) of the FCC Rules. In particular, the following sections of the application are to bekept confidential for a period of 180 days from the date of Authorization: [Select one or more of items below that are not selected in the list above, as appropriate] • Schematics • Detailed Block diagrams • Detailed Operational/Functional Description • Test setup photos • External photos • Internal photos • User manual 香港新界沙田火炭坳背灣街26-28號富騰工業中心17字樓1704室 Room 1704, 17/F, Fo Tan Industrial Center, 26-2 8 Au Pui Wan Street, Fo Tan, Shatin, N.T. Tel: +852 3188 2618 Fax: +852 3188 1060 Rationale for request for confidentiality: Arts Digital Technology (HK) Ltd. has invested considerable time and materials in research and development to produce the referenced product. [Permanent confidentiality: Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us.][Short term confidentiality: Disclosure of the shortterm confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development.] [For FCC certification; delete for TCB certification: The fee for confidentiality has been submitted along with the fee for certification.] If you have questions or need further information, please contact the undersigned. Sincerely, [Signature] [Title] Merchandising Manager [Company name] Arts Digital Technology (HK) Ltd.

INTERTEK TESTING SERVICE Report No.: 15040320HKG-002 FCC ID: OWT-CEU5000BT Equipment Photographs Model: CEU5000-BT (External) INTERTEK TESTING SERVICE Report No.: 15040320HKG-002 FCC ID: OWT-CEU5000BT Equipment Photographs Model: CEU5000-BT (External) INTERTEK TESTING SERVICE Report No.: 15040320HKG-002 FCC ID: OWT-CEU5000BT Equipment Photographs Model: CEU5000-BT (External) INTERTEK TESTING SERVICE Report No.: 15040320HKG-002 FCC ID: OWT-CEU5000BT Equipment Photographs Model: CEU5000-BT (External)

Label Location ICES-003. CEU5000-BT Product Rating Label (Scale 1:1)Label Size = 105 X 74mm. White letters on Black BackgroundMM/YY ; MM=month/YY=year. Quantity : 1pcs on unit rear panel Bluetooth Mini System with Light Effects MODEL: CEU5000-BT AUDIO PRODUCTS AND ACCESSORIES FM: 87.5-108MHz AM:530-1710kHzPOWER SOURCE:AC 100-240V~50/60Hz 280W MAX.Made in PRCDate Code: 04/2015 CONFORMS TOANSI/UL STD.60065CERTIFIED TO CAN/CSA STD. C22.2 No.60065 5001112 FCC ID: OWT-CEU5000BT NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

INTERTEK TESTING SERVICE Report No.: 15040320HKG-002 FCC ID: OWT-CEU5000BT Equipment Photographs Model: CEU5000-BT (Internal) INTERTEK TESTING SERVICE Report No.: 15040320HKG-002 FCC ID: OWT-CEU5000BT Equipment Photographs Model: CEU5000-BT (Internal) INTERTEK TESTING SERVICE Report No.: 15040320HKG-002 FCC ID: OWT-CEU5000BT Equipment Photographs Model: CEU5000-BT (Internal) INTERTEK TESTING SERVICE Report No.: 15040320HKG-002 FCC ID: OWT-CEU5000BT Equipment Photographs Model: CEU5000-BT (Internal) INTERTEK TESTING SERVICE Report No.: 15040320HKG-002 FCC ID: OWT-CEU5000BT Equipment Photographs Model: CEU5000-BT (Internal) INTERTEK TESTING SERVICE Report No.: 15040320HKG-002 FCC ID: OWT-CEU5000BT Equipment Photographs Model: CEU5000-BT (Internal) INTERTEK TESTING SERVICE Report No.: 15040320HKG-002 FCC ID: OWT-CEU5000BT Equipment Photographs Model: CEU5000-BT (Internal) INTERTEK TESTING SERVICE Report No.: 15040320HKG-002 FCC ID: OWT-CEU5000BT Equipment Photographs Model: CEU5000-BT (Internal) INTERTEK TESTING SERVICE Report No.: 15040320HKG-002 FCC ID: OWT-CEU5000BT Equipment Photographs Model: CEU5000-BT (Internal) INTERTEK TESTING SERVICE Report No.: 15040320HKG-002 FCC ID: OWT-CEU5000BT Equipment Photographs Model: CEU5000-BT (Internal) INTERTEK TESTING SERVICE Report No.: 15040320HKG-002 FCC ID: OWT-CEU5000BT Equipment Photographs Model: CEU5000-BT (Internal) INTERTEK TESTING SERVICE Report No.: 15040320HKG-002 FCC ID: OWT-CEU5000BT Equipment Photographs Model: CEU5000-BT (Internal) INTERTEK TESTING SERVICE Report No.: 15040320HKG-002 FCC ID: OWT-CEU5000BT Equipment Photographs Model: CEU5000-BT (Internal) INTERTEK TESTING SERVICE Report No.: 15040320HKG-002 FCC ID: OWT-CEU5000BT Equipment Photographs Model: CEU5000-BT (Internal) INTERTEK TESTING SERVICE Report No.: 15040320HKG-002 FCC ID: OWT-CEU5000BT Equipment Photographs Model: CEU5000-BT (Internal) INTERTEK TESTING SERVICE Report No.: 15040320HKG-002 FCC ID: OWT-CEU5000BT Equipment Photographs Model: CEU5000-BT (Internal)

INTERTEK TESTING SERVICE FCC ID: OWT-CEU5000BT MPE Analysis Report The Equipment Under Test (EUT) is a Bluetooth Hi Fi Music System with Light Effects, also equipped with microphone input, FM/AM tuner, AUX-in, CD, USB flash memory playback and Video output. It can be paired with Bluetooth audio device for wireless audio playing. For Bluetooth, the EUT occupies a frequency range from 2402MHz to 2480MHz (79 channels with channel spacing of 1MHz). The EUT is powered by 120VAC only. The NFC tag is a passive device which is powered by external RF field. 2.4GHz Bluetooth Module: Antenna Type: Integral, Internal Antenna gain: 0dBi Operating mode Nominal Production Modulation Radiated Tolerance Type Field Strength Bluetooth 3.0 90.8 dBμV/m at 3m +3/-3dB GFSK For Maximum Permissible Exposure (MPE) evaluation, the maximum power density at 20 cm from this mobile transmitter shall be less than the General Population / Uncontrolled MPE limit in OET Bulletin 65. The maximum field strength measured (FS) was 93.8dBμV/m. The distance (D) between the antenna and the equipment under test (EUT) was 3 meters. And the maximum source-based time-averaging duty factor is 100%. From these data, the exposed power density at a distance (R) of 20cm from the center of radiation of the antenna can be calculated according to OET Bulletin 65 as follow: The radiated power = (FS*D)^2 / 30 = 0.72 mW The radiated (EIRP) source-based time-averaging output power = (0.72 * 1) mW = 0.72 mW The power density at 20 cm from the antenna = EIRP / 4 πR^2 = 0.000143 mW cm-2 INTERTEK TESTING SERVICE FCC ID: OWT-CEU5000BT In the frequency range of 1,500 - 100,000MHz, the MPE limit is 1.0 mWcm-2 for general population and uncontrolled exposure. As the measured power density at 20cm from the transmitter is lower than the MPE limit, the compliance to the MPE limit can be ensured by indicating the minimum 20cm separation between the transmitter's radiating structures and body of the user or nearby persons. The following RF exposure statement is proposed to be included in the user manual: “ FCC Radiation Exposure Statement: This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used forth is transmitter must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter.”

- Intertek's standard Terms and Conditions can be obtained at our website http://www.intertek.com/terms/. - The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. - This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com TEST REPORT Report No.: 15040320HKG-002 Arts Digital Technology (HK) Limited Application For Certification (Original Grant) (FCC ID: OWT-CEU5000BT) Transceiver Prepared and Checked by: Approved by: Signed On File Wong Cheuk Ho, Herbert Lead Engineer Wong Kwok Yeung, Kenneth Lead Engineer Date: May 29, 2015 INTERTEK TESTING SERVICES Report No.: 15040320HKG-002 i FCC ID: OWT-CEU5000BT GENERAL INFORMATION Grantee: Arts Digital Technology (HK) Limited Grantee Address: 1704, 17/F, Fo Tan Industrial Centre, 26-28 Au Pui Wan Street, Fo Tan, N.T., Hong Kong. Contact Person: Dora Lee Tel: (852) 3188-2618 Fax: (852) 3188-1016 e-mail: [email protected] Manufacturer: Dongguan Hong Yin Industrial Co., Ltd. Manufacturer Address: Yang Fu Industrial Zone, SangYuan, DongGuan City, Guangdong, China. Brand Name: AKAI Model: CEU5000-BT CEU4000-BT, KS5500-BT, KS4400-BT, XD500, XD4 Type of EUT: Transceiver Description of EUT: Bluetooth Hi Fi Music System with Light Effects Serial Number: N/A FCC ID: OWT-CEU5000BT Date of Sample Submitted: April 08, 2015 Date of Test: April 08, 2015 to 04 Jun, 2015 Report No.: 15040320HKG-002 Report Date: May 29, 2015 Environmental Conditions: Temperature: +10 to 40°C Humidity: 10 to 90% INTERTEK TESTING SERVICES Report No.: 15040320HKG-002 ii FCC ID: OWT-CEU5000BT SUMMARY OF TEST RESULT TEST SPECIFICATION REFERENCE RESULTS Transmitter Power Line Conducted Emissions 15.207 Pass Radiated Emission Radiated Emission on the Bandedge 15.249, 15.209 Pass Radiated Emission in Restricted Bands 15.205 Pass The equipment under test is found to be complying with the following standards: FCC Part 15, October 1, 2013 Edition Note: 1. The EUT uses a permanently attached antenna which, in accordance to section 15.203, is considered sufficient to comply with the pervisions of this section. 2. Pursuant to FCC part 15 Section 15.215(c), the 20 dB bandwidth of the emission was contained within the frequency band designated (mentioned as above) which the EUT operated. The effects, if any, from frequency sweeping, frequency hopping, other modulation techniques and frequency stability over excepted variations in temperature and supply voltage were considered. INTERTEK TESTING SERVICES Report No.: 15040320HKG-002 iii FCC ID: OWT-CEU5000BT Table of Contents 1.0 General Description....................................................................................... 1 1.1 Product Description ...................................................................................... 1 1.2 Related Submittal(s) Grants .......................................................................... 1 1.3 Test Methodology ......................................................................................... 1 1.4 Test Facility .................................................................................................. 1 2.0 System Test Configuration ............................................................................ 2 2.1 Justification................................................................................................... 2 2.2 EUT Exercising Software .............................................................................. 2 2.3 Special Accessories...................................................................................... 2 2.4 Measurement Uncertainty ............................................................................. 3 2.5 Support Equipment List and Description........................................................ 3 3.0 Emission Results ........................................................................................... 4 3.1 Field Strength Calculation ............................................................................. 4 3.2 Radiated Emission Configuration Photograph ............................................... 5 3.3 Radiated Emission Data ............................................................................... 5 3.4 Conducted Emission Configuration Photograph ............................................ 5 3.5 Conducted Emission Data............................................................................. 5 4.0 Equipment Photographs .............................................................................. 11 5.0 Product Labelling......................................................................................... 11 6.0 Technical Specifications.............................................................................. 11 7.0 Instruction Manual ....................................................................................... 11 8.0 Miscellaneous Information...........................................…

Text truncated - open the document above for the full version.

INTERTEK TESTING SERVICE Report No: 15040320HKG-002 FCC ID: OWT-CEU5000BT Configuration Photographs Worst-Case Radiated Emissions (Front View) Model: CEU5000-BT 15040320HKG-002 Model: CEU5000-BT Side-A INTERTEK TESTING SERVICE Report No: 15040320HKG-002 FCC ID: OWT-CEU5000BT Configuration Photographs Worst-Case Radiated Emissions (Rear View) Model: CEU5000-BT 15040320HKG-002 Model: CEU5000-BT Side-B

INTERTEK TESTING SERVICE Report No: 15040320HKG-002 FCC ID: OWT-CEU5000BT i Configuration Photographs Worst-Case Line-Conducted Emissions (Front View) Model: CEU5000-BT INTERTEK TESTING SERVICE Report No: 15040320HKG-002 FCC ID: OWT-CEU5000BT ii Configuration Photographs Worst-Case Line-Conducted Emissions (Rear View) Model: CEU5000-BT INTERTEK TESTING SERVICE Report No: 15040320HKG-002 FCC ID: OWT-CEU5000BT iii Configuration Photographs Worst-Case Line-Conducted Emissions (Side View) Model: CEU5000-BT