OZ5HNS1000Satellite Receiver Remote Control

SELECT MENU POWER SELECT MENU POWER Models GAEB0 GCEB0 Owner’s Manual Digital Satellite Receiver Draft A.03 5/1/01 Copyright © 2001 Hughes Network Systems, a Hughes Electronics Corporation company All rights reserved. This publication and its contents are proprietary to Hughes Network Systems, a Hughes Electronics Corporation company. No part of this publication may be reproduced in any form or by any means without the written permission of Hughes Network Systems, 11717 Exploration Lane, Germantown, Maryland 20876. Hughes Network Systems has made every effort to ensure the correctness and completeness of the material in this document. Hughes Network Systems shall not be liable for errors contained herein. The information in this document is subject to change without notice. Hughes Network Systems makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose Trademarks All trademarks, marks, names, or product names referenced in this publication are the property of their respective owners, and Hughes Network Systems neither endorses nor otherwise sponsors any such products or services referred to herein Disclaimer Every effort has been made to ensure the correctness and completeness of the material in this document. No company shall be liable for errors contained herein. The information in this document is subject to change without notice, No warranty of any kind is made with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. StarSight © Information StarSight© features licensed under one or more of the following patents: 4,706,121; 5,151789; 5,335,277; 5,353,121; 5,479,266; 5,479,268; and 5,532,754. Use rights reserved. Note on recording programming Most television programs and films are copyrighted. This means that someone has legal rights governing the reproduction and distribution of this material. In certain circumstances, copyright law may apply yo to private in-home taping of copyrighted materials. In most cases, it is permissible to record for your personal use, as long as you do not sell the material. You must act responsibly in this area–check into the matter if you are unsure. Some pay-per-view programs may be licensed from producers as “view-only” programs. These are copyrighted programs, and may not be copied or reproduced for any purpose without the express written permission of the copyright owner. DIRECTV © Programming For subscription information, pay-per-view, or to resolve problems related to programming, contact DIRECTV at 1-800-DIRECTV (347-3288). DIRECTV © programming is sold separately and independently of DIRECTV System hardware. A valid programming subscription is required to operate DIRECTV System hardware. Please contact DIRECTV directly at 1-800-DIRECTV to order programming. DIRECTV © system hardware and installation To arrange for professional installation of your DIRECTV system, ask questions, or to resolve problems related to your DIRECTV system, contact your dealer. If you need more information, please contact the Customer Care Center toll-free at 1-800-274-8995. Please record the following information for warranty System Model #: HSYS- _____ _____ _____ _____ ____ Receiver Model #: ______________________________ Receiver Serial #: ______________________________ Access Card #: __________ ___________ __________ LNB Serial #: __________________________________ Important Safety Instructions For your safety and protection, read this entire Owner’s Manual before you attempt to install or use your satellite system. In particular, read the following safety information carefully. Danger, Warning, Caution, and Notes defined below are used in this guide to alert you to, and familiarize you with possible safety and equipment hazards. Keep this safety information where you can refer to it if necessary. Heed Warnings - All warnings on the product and in the operating instructions should be adhered to. Follow Instructions - All operating and use instructions should be strictly followed. These alert definitions are used in this manual: These alert definitions appear in this manual: Note:A note presents additional information. DANGER Indicates an imminent shock hazard that, if not avoided, will result in death or severe personal injury caused by electric shock. WARNING Indicates a hazard or unsafe practice that, if not avoided, could result in death or severe personal injury. CAUTION Indicates a hazard or unsafe practice that might result in moderate or minor personal injury. DANGER Do not select a location to install the satellite dish antenna near electrical power lines. You can be killed if the satellite dish antenna comes into contact with electrical power lines. •Do not contact overhead power lines. •Check the distance to any nearby power lines before starting installation. Stay at least 20 feet (6.1 meters) away from all power lines. •If any part of the satellite dish antenna or mast assembly contacts a power line, call your local power company for assistance. Do not try to remove it yourself. They will remove it safely. WARNING For your safety, follow these important safety rules: •Perform as many tasks as possible on the ground. •Do not attempt to install the satellite dish antenna on a rainy or windy day. •If you start to drop the satellite dish antenna or mast assembly, get away from it and let it fall. CAUTION Local electrical codes and the National Electric Code (NEC) require the satellite dish antenna to be grounded. Grounding the satellite dish antenna helps protect against damage caused by static voltage buildup. Grounding can also protect against voltage surges created by nearby lightning strikes. iii iv INSTALLATION Polarization– This digital satellite receiver is equipped with a plug that will fit into the power outlet only one way. Do not modify the plug defeating t…

Text truncated - open the document above for the full version.

“Gaither” Remote Control, Top View “Gaither” Remote Control, Bottom View

Top Cover Removed Key Pad Membrane Removed, Top View of PCB Bottom View of PCB Assembly

SELECT MENU POWER SELECT MENU POWER Models GAEB0 GCEB0 Owner’s Manual Digital Satellite Receiver Draft A.03 5/1/01 Copyright © 2001 Hughes Network Systems, a Hughes Electronics Corporation company All rights reserved. This publication and its contents are proprietary to Hughes Network Systems, a Hughes Electronics Corporation company. No part of this publication may be reproduced in any form or by any means without the written permission of Hughes Network Systems, 11717 Exploration Lane, Germantown, Maryland 20876. Hughes Network Systems has made every effort to ensure the correctness and completeness of the material in this document. Hughes Network Systems shall not be liable for errors contained herein. The information in this document is subject to change without notice. Hughes Network Systems makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose Trademarks All trademarks, marks, names, or product names referenced in this publication are the property of their respective owners, and Hughes Network Systems neither endorses nor otherwise sponsors any such products or services referred to herein Disclaimer Every effort has been made to ensure the correctness and completeness of the material in this document. No company shall be liable for errors contained herein. The information in this document is subject to change without notice, No warranty of any kind is made with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. StarSight © Information StarSight© features licensed under one or more of the following patents: 4,706,121; 5,151789; 5,335,277; 5,353,121; 5,479,266; 5,479,268; and 5,532,754. Use rights reserved. Note on recording programming Most television programs and films are copyrighted. This means that someone has legal rights governing the reproduction and distribution of this material. In certain circumstances, copyright law may apply yo to private in-home taping of copyrighted materials. In most cases, it is permissible to record for your personal use, as long as you do not sell the material. You must act responsibly in this area–check into the matter if you are unsure. Some pay-per-view programs may be licensed from producers as “view-only” programs. These are copyrighted programs, and may not be copied or reproduced for any purpose without the express written permission of the copyright owner. DIRECTV © Programming For subscription information, pay-per-view, or to resolve problems related to programming, contact DIRECTV at 1-800-DIRECTV (347-3288). DIRECTV © programming is sold separately and independently of DIRECTV System hardware. A valid programming subscription is required to operate DIRECTV System hardware. Please contact DIRECTV directly at 1-800-DIRECTV to order programming. DIRECTV © system hardware and installation To arrange for professional installation of your DIRECTV system, ask questions, or to resolve problems related to your DIRECTV system, contact your dealer. If you need more information, please contact the Customer Care Center toll-free at 1-800-274-8995. Please record the following information for warranty System Model #: HSYS- _____ _____ _____ _____ ____ Receiver Model #: ______________________________ Receiver Serial #: ______________________________ Access Card #: __________ ___________ __________ LNB Serial #: __________________________________ Important Safety Instructions For your safety and protection, read this entire Owner’s Manual before you attempt to install or use your satellite system. In particular, read the following safety information carefully. Danger, Warning, Caution, and Notes defined below are used in this guide to alert you to, and familiarize you with possible safety and equipment hazards. Keep this safety information where you can refer to it if necessary. Heed Warnings - All warnings on the product and in the operating instructions should be adhered to. Follow Instructions - All operating and use instructions should be strictly followed. These alert definitions are used in this manual: These alert definitions appear in this manual: Note:A note presents additional information. DANGER Indicates an imminent shock hazard that, if not avoided, will result in death or severe personal injury caused by electric shock. WARNING Indicates a hazard or unsafe practice that, if not avoided, could result in death or severe personal injury. CAUTION Indicates a hazard or unsafe practice that might result in moderate or minor personal injury. DANGER Do not select a location to install the satellite dish antenna near electrical power lines. You can be killed if the satellite dish antenna comes into contact with electrical power lines. •Do not contact overhead power lines. •Check the distance to any nearby power lines before starting installation. Stay at least 20 feet (6.1 meters) away from all power lines. •If any part of the satellite dish antenna or mast assembly contacts a power line, call your local power company for assistance. Do not try to remove it yourself. They will remove it safely. WARNING For your safety, follow these important safety rules: •Perform as many tasks as possible on the ground. •Do not attempt to install the satellite dish antenna on a rainy or windy day. •If you start to drop the satellite dish antenna or mast assembly, get away from it and let it fall. CAUTION Local electrical codes and the National Electric Code (NEC) require the satellite dish antenna to be grounded. Grounding the satellite dish antenna helps protect against damage caused by static voltage buildup. Grounding can also protect against voltage surges created by nearby lightning strikes. iii iv INSTALLATION Polarization– This digital satellite receiver is equipped with a plug that will fit into the power outlet only one way. Do not modify the plug defeating t…

Text truncated - open the document above for the full version.

Document 6455-01, Rev. 0 OZ5HNS1030302 FCC Certification Test Report Washington Laboratories, Ltd ?month ?year FCC Certification Test Report FCC Rule Part 15.231 for OHSUNG Electronics Co., LTD FCC ID: OZ5HNS1030302 June 25, 2001 Prepared for: OHSUNG Electronics Co., LTD 181 Gongdang-Dong Gumi-City, Kyungbuk, Korea Prepared By: Washington Laboratories, Ltd. 7560 Lindbergh Drive Gaithersburg, Maryland 20879 FCC Certification Test Report Document 6455-01, Rev. 0 OZ5HNS1030302 FCC Certification Test Report Washington Laboratories, Ltd ?month ?year FCC Certification Test Program FCC Certification Test Report for the OHSUNG Electronics Co., LTD HRMC-9 Remote Control OZ5HNS1030302 June 25, 2001 WLL JOB# 6455 Prepared by: _______________________________ Michael F. Violette, P.E. President Reviewed by: _______________________________ Greg Snyder, NARTE-Certified EMC Test Engineer Chief EMC Engineer Document 6455, Rev. 0 FCC ID: OZ5HNS1030302 FCC Certification Test Report Washington Laboratories, Ltd June 2001 ii Abstract This report has been prepared on behalf of Ohsung Electronics Co., Ltd to support the attached Application for Equipment Authorization. The test report and application are submitted for a Low Power Periodic Intentional Radiator under Part 15.231 of the FCC Rules and Regulations. This Federal Communication Commission (FCC) Certification Test Report documents the test configuration and test results for a Ohsung Electronics Co., Ltd HRMC-9 Remote Control. Testing was performed on an Open Area Test Site (OATS) of Washington Laboratories, Ltd, 7560 Lindbergh Drive, Gaithersburg, MD 20879. Site description and site attenuation data have been placed on file with the FCC's Sampling and Measurements Branch at the FCC laboratory in Columbia, MD. Washington Laboratories, Ltd. has been accepted by the FCC and approved by NIST NVLAP (NVLAP Lab Code: 200066-0) as an independent FCC test laboratory. The Ohsung Electronics Co., Ltd HRMC-9 Remote Control complies with the limits for a Low Power Periodic Intentional Radiator device under Part 15.231 of the FCC Rules and Regulations. Document 6455, Rev. 0 FCC ID: OZ5HNS1030302 FCC Certification Test Report Washington Laboratories, Ltd June 2001 iii Table of Contents Abstract......................................................................................................ii 1 Introduction...................................................................................................................1 1.1 Compliance Statement............................................................................................1 1.2 Test Scope............................................................................................................1 1.3 Contract Information..............................................................................................1 1.4 Test Dates.............................................................................................................1 1.5 Test and Support Personnel....................................................................................1 1.6 Abbreviations.........................................................................................................1 2 Equipment Under Test....................................................................................................2 2.1 EUT Identification & Description............................................................................2 2.2 Test Configuration..................................................................................................2 2.3 Testing Algorithm...................................................................................................3 2.4 Test Location.........................................................................................................3 2.5 Measurements........................................................................................................3 2.5.1 References.........................................................................................................3 2.6 Measurement Uncertainty.......................................................................................3 3 Test Equipment..............................................................................................................3 4 Test Results...................................................................................................................4 4.1 Duty Cycle Correction...........................................................................................4 4.2 RF Power Output: (FCC Part §2.1046).................................................................7 4.3 Modulation Characteristics: (FCC Part §2.1047)....................................................7 4.4 Occupied Bandwidth: (FCC Part §2.1049)............................................................7 4.5 Spurious Emissions at Antenna Terminals (FCC Part §2.1051)...............................9 4.6 Radiated Spurious Emissions: §2.1053...................................................................9 4.6.1 Test Procedure................................................................................................9 4.7 Frequency Stability: (FCC Part §2.1055).............................................................15 4.8 Transient Frequency Response (Part 90.214).......................................................15 5 Transmitter Environmental Assessment, Maximum Permissible Exposure (MPE)............16 5.1 SCOPE...............................................................................................................16 Document 6455, Rev. 0 FCC ID: OZ5HNS1030302 FCC Certification Test Report Washington Laboratories, Ltd June 2001 iv List of Tables Figure 1. Occupied Bandwidth.............................................................................................8 Figure 2: Radiated Emission Test Configuration, X-Axis.....................................................13 Figure 3: Radiat…

Text truncated - open the document above for the full version.

Radiated Emissions Test Setup, Horizontal Radiated Emissions Test Setup, Horizontal 90 Degrees Radiated Emissions Test Setup, Vertical