OZ5TC011MARF Remote Control Unit

Order Number : GETEC-C1-20-647 FCC Part 15 subpart C Test Report Number : GETEC-E3-20-087 Page 1 / 1 EUT Type: RF Remote Control Unit FCC ID.: OZ5TC011MA APPENDIX H : USER’S MANUAL [KOREA] C011 User Information (Model Name : C011) Table of Contents 1.Overview and Specification of C011 (1)Overview (2)Specification 2.Precautions 3.Customer Support (1)Overview This remote control uses wireless communication in the 2.4GHz band, It is a product that can be controlled with the MAKITA Module receiver and key button. (2) Specifications 구 분내 용 Model No. C011 Range of frequency 2402~2480 MHz Channel 40 Channel Output power 3 dBm Receive sensitivity –92 dBm Size Width 58mm X Thickness 15.9 mm X Length 131.5 mm (tolerance± 0.8 mm) Weight 63.2g (tolerance± 5g, battery not applied) Power source AAA x 2EA, (2 alkaline batteries are used) Operational Temperature range -20 °C ~ + 50 °C Importer 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446- 8502 Japan 1. Overview and Specification of C011 2. Precaution (1) After replacement of the battery, use the remote control following pairing in accordance with user manual. (2) If the unit does not operate after replacement of battery, reattempt pairing in accordance with the user manual. (3) If the remote controller is not being used for prolonged period of time, it is recommended you remove the battery from the unit. (4) Do not dismantle or exert heat to the battery. (5) Do not drop battery or exert extreme impact that may even cause the case to be damaged. (6) Do not immerse the battery in water. (7) There is danger of explosion if a the battery is inserted reversely. (8)Properly dispose of used batteries. 3. Customer Support Refer to the contact number for services provided in the MAKITA Manual. [KC certification mark and number] Certification number : R-C-OHS-C011 [TELEC certification mark and number] Certification number :XXXXXX [FCC ID certification mark and number] Certification number :OZ5TC011MA [IC certification mark and number] Certification number :21703-C011 [CE certification mark] “Since the wireless device has the potential for radio wave interference, services related to personal safety cannot be provided.” Business name : Ohsung Electronics Co., Ltd Manufacturing date : 2020.12 Manufacturer/Country of Manufacture : Ohsung Electronics Co., Ltd / Korea Equipment/Model name : Specific low power wireless device (wireless device for wireless data communication system / C011 FCC Caution This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.This device may not cause harmful interference 2.This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Federal Communication Commissions (FCC) Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Canadian (IC) Two-part Statement (English and French) This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1) L’appareil ne doit pas produire de brouillage; 2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Order Number : GETEC-C1-20-647 FCC Part 15 subpart C Test Report Number : GETEC-E3-20-087 Page 1 / 1 EUT Type: RF Remote Control Unit FCC ID.: OZ5TC011MA APPENDIX A : ATTESTATION STATEMENT Oct. 22, 2020 Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakla nd Mills Road Columbia, MD 21046 U.S.A. To whom it may concern: We, the undersigned, hereby authorize Hyun Kim at GUMI University EMC Center to act on our behalf in all matters relating to applications for equipment authorization, including the signing of all documents relation to these matters. Any and all acts carried out by Hyun Kim at GUMI University EMC Center on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to the application is subject of a denial of benefits, including FCC benefits, pursuant 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Sincerely, Hak-Ki, Kim / General Manager OHSUNG ELECTRONICS CO., LTD.

Confidentiality Request Letter Ohsung Electronics Co.,Ltd #181 Gongdan-Dong, Gumi-Si,Gyeongsangbuk-Do, South Korea Tel: +82-54-468-7282, Fax: +82-54-461-8368 Feb. 02, 2021 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: OZ5TC011MA Pursuant to sections 0.457 and 0.459 of CFR 47, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application as: - Schematic Diagram - Block Diagram - Part List - Operational Description - Antenna Specification The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature Client’s name : Hak-Ki Kim Title : General Manager Contact information : +82-54-468-7282 Address : #181 Gongdan-Dong, Gumi-Si,Gyeongsangbuk-Do, South Korea Ohsung Electronics Co.,Ltd #181 Gongdan-Dong, Gumi-Si,Gyeongsangbuk-Do, South Korea Tel: +82-54-468-7282, Fax: +82-54-461-8368 Feb. 02, 2021 To: Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Short Term Confidentiality Request for FCC ID: OZ5TC011MA To Whom It May Concern: Pursuant to sections 0.457 and 0.459 of CFR 47, and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 or 180 days; or for a specified date of / / not to exceed 180 days from the Grant Date. See KDB 726920. - User Manual - Test Setup Photos - External Photos - Internal Photos The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, Client’s signature Client’s name : Hak-Ki Kim Title : General Manager Contact information : +82-54-468-7282 Address : #181 Gongdan-Dong, Gumi-Si,Gyeongsangbuk-Do, South Korea

Order Number : GETEC-C1-20-647 FCC Part 15 subpart C Test Report Number : GETEC-E3-20-087 Page 1 / 8 EUT Type: RF Remote Control Unit FCC ID.: OZ5TC011MA APPENDIX F : EXTERNAL PHOTOGRAPHS Order Number : GETEC-C1-20-647 FCC Part 15 subpart C Test Report Number : GETEC-E3-20-087 Page 2 / 8 EUT Type: RF Remote Control Unit FCC ID.: OZ5TC011MA < Front view > Order Number : GETEC-C1-20-647 FCC Part 15 subpart C Test Report Number : GETEC-E3-20-087 Page 3 / 8 EUT Type: RF Remote Control Unit FCC ID.: OZ5TC011MA < Rear view #1 > Order Number : GETEC-C1-20-647 FCC Part 15 subpart C Test Report Number : GETEC-E3-20-087 Page 4 / 8 EUT Type: RF Remote Control Unit FCC ID.: OZ5TC011MA < Rear view #2 > Order Number : GETEC-C1-20-647 FCC Part 15 subpart C Test Report Number : GETEC-E3-20-087 Page 5 / 8 EUT Type: RF Remote Control Unit FCC ID.: OZ5TC011MA < Left view > Order Number : GETEC-C1-20-647 FCC Part 15 subpart C Test Report Number : GETEC-E3-20-087 Page 6 / 8 EUT Type: RF Remote Control Unit FCC ID.: OZ5TC011MA < Right view > Order Number : GETEC-C1-20-647 FCC Part 15 subpart C Test Report Number : GETEC-E3-20-087 Page 7 / 8 EUT Type: RF Remote Control Unit FCC ID.: OZ5TC011MA < Top view > Order Number : GETEC-C1-20-647 FCC Part 15 subpart C Test Report Number : GETEC-E3-20-087 Page 8 / 8 EUT Type: RF Remote Control Unit FCC ID.: OZ5TC011MA < Bottom view >

Order Number : GETEC-C1-20-647 FCC Part 15 subpart C Test Report Number : GETEC-E3-20-087 Page 1 / 2 EUT Type: RF Remote Control Unit FCC ID.: OZ5TC011MA APPENDIX B : ID SAMPLE LABEL & LOCATION Order Number : GETEC-C1-20-647 FCC Part 15 subpart C Test Report Number : GETEC-E3-20-087 Page 2 / 2 EUT Type: RF Remote Control Unit FCC ID.: OZ5TC011MA LABELLING REQUIREMENTS The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time of purchase.  ID Label  ID Label Location of EUT ID Label

Order Number : GETEC-C1-20-647 FCC Part 15 subpart C Test Report Number : GETEC-E3-20-087 Page 1 / 4 EUT Type: RF Remote Control Unit FCC ID.: OZ5TC011MA APPENDIX G : INTERNAL PHOTOGRAPHS Order Number : GETEC-C1-20-647 FCC Part 15 subpart C Test Report Number : GETEC-E3-20-087 Page 2 / 4 EUT Type: RF Remote Control Unit FCC ID.: OZ5TC011MA < Inside view > Order Number : GETEC-C1-20-647 FCC Part 15 subpart C Test Report Number : GETEC-E3-20-087 Page 3 / 4 EUT Type: RF Remote Control Unit FCC ID.: OZ5TC011MA < Main board Top view > Order Number : GETEC-C1-20-647 FCC Part 15 subpart C Test Report Number : GETEC-E3-20-087 Page 4 / 4 EUT Type: RF Remote Control Unit FCC ID.: OZ5TC011MA < Main board bottom view > Antenna

Order Number : GETEC-C1-20-647 FCC Part 15 subpart C Test Report Number : GETEC-E3-20-087 Page 1 / 2 EUT Type: RF Remote Control Unit FCC ID.: OZ5TC011MA APPENDIX L : RF EXPOSURE EVALUATION Order Number : GETEC-C1-20-647 FCC Part 15 subpart C Test Report Number : GETEC-E3-20-087 Page 2 / 2 EUT Type: RF Remote Control Unit FCC ID.: OZ5TC011MA 1. RF Exposure Evaluation Test Result of RF Exposure Evaluation According to the KDB-447498 D01 V06, FCC 47CFR § 2.1093 the following RF exposure evaluation shall to demonstrate RF exposure compliance [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] *[√f(GHz)] Frequency (MHz) Average Conducted Output Power(dBm) Target Power /tolerance (dBm) Max tune up power Tolerance (dBm) Maximum Average Output Power(mW) Separation Destance (mm) RF Exposure 2 402 2.8 3 ± 1 4 2.512 5 0.78 2 440 2.9 3 ± 1 4 2.512 5 0.78 2 480 3.1 3 ± 1 4 2.512 5 0.79 The Max RF exposure is 0.79 Threshold at which no SAR required is << 3 for 1-g SAR, Separation distance is 5 mm Conclusion: So no SAR is required.

Order Number : GETEC-C1-20-647 FCC Part 15 Subpart C Test Report Number : GETEC-E3-20-087 Page 2 / 32 GETEC-QP-16-008 (Rev.00) EUT Type: RF Remote Control Unit FCC ID.: OZ5TC011MA G E T E C Version Test Report No. Date Description GETEC-E3-20-087 Jan. 04, 2021 - First Approval Report Order Number : GETEC-C1-20-647 FCC Part 15 Subpart C Test Report Number : GETEC-E3-20-087 Page 3 / 32 GETEC-QP-16-008 (Rev.00) EUT Type: RF Remote Control Unit FCC ID.: OZ5TC011MA G E T E C CONTENTS 1. GENERAL INFORMATION ...................................................................................................................................... 5 2. INTRODUCTION ........................................................................................................................................................ 6 3. PRODUCT INFORMATION ...................................................................................................................................... 7 3.1 DESCRIPTION OF EUT .............................................................................................................................................. 7 3.2 DEFINITION OF MODELS ........................................................................................................................................... 7 3.3 SUPPORT EQUIPMENT / CABLES USED ..................................................................................................................... 8 3.4 MODIFICATION ITEM(S) ........................................................................................................................................... 8 4. ANTENNA REQUIREMENT - §15.203 ..................................................................................................................... 9 4.1 DESCRIPTION OF ANTENNA ...................................................................................................................................... 9 5. DESCRIPTION OF TESTS ......................................................................................................................................... 9 5.1 TEST CONDITION ...................................................................................................................................................... 9 6. REFERENCES STANDARDS .................................................................................................................................... 9 7. SUMMARY OF TEST RESULTS ............................................................................................................................. 10 8. 6 DB BANDWIDTH MEASUREMENT .................................................................................................................. 11 8.1 OPERATING ENVIRONMENT.................................................................................................................................... 11 8.2 TEST SET-UP (LAYOUT) .......................................................................................................................................... 11 8.3 LIMIT ...................................................................................................................................................................... 11 8.4 TEST EQUIPMENT USED .......................................................................................................................................... 11 8.5 TEST TEST PROCEDURE ......................................................................................................................................... 11 8.6 TEST RESULT .......................................................................................................................................................... 12 9. CONDUCTED MAXIMUM OUTPUT POWER MEASUREMENT .................................................................... 14 9.1 OPERATING ENVIRONMENT.................................................................................................................................... 14 9.2 TEST SET-UP (LAYOUT) .......................................................................................................................................... 14 9.3 LIMIT ...................................................................................................................................................................... 14 9.4 TEST EQUIPMENT USED .......................................................................................................................................... 14 9.5 TEST PROCEDURE .................................................................................................................................................. 14 9.6 TEST RESULT .......................................................................................................................................................... 15 10. POWER SPECTRAL DENSITY MEASUREMENT ............................................................................................ 16 10.1 OPERATING ENVIRONMENT ................................................................................................................................. 16 10.2 TEST SET-UP (LAYOUT) ........................................................................................................................................ 16 10.3 LIMIT .................................................................................................................................................................... 16 10.4 TEST EQUIPMENT USED ........................................................................................................................................ 16 10.5 TEST PROCEDURE ................................................................................................................................................ 16 10.6 TEST RESULT .................................................................................................................…

Text truncated - open the document above for the full version.

Order Number : GETEC-C1-20-647 FCC Part 15 subpart C Test Report Number : GETEC-E3-20-087 Page 1 / 3 EUT Type: RF Remote Control Unit FCC ID.: OZ5TC011MA APPENDIX E : TEST SET UP PHOTOGRAPHS Order Number : GETEC-C1-20-647 FCC Part 15 subpart C Test Report Number : GETEC-E3-20-087 Page 2 / 3 EUT Type: RF Remote Control Unit FCC ID.: OZ5TC011MA  Radiated Test Picture: Below 30 MHz  Radiated Test Picture: Below 1 GHz Order Number : GETEC-C1-20-647 FCC Part 15 subpart C Test Report Number : GETEC-E3-20-087 Page 3 / 3 EUT Type: RF Remote Control Unit FCC ID.: OZ5TC011MA  Radiated Test Picture: Above 1 GHz  EUT Setup Picture