P27-SCE5164-B48Bridgestone

Bridgestone Model: SCE5164-B48 User Manual Manufactured By: Sercomm Corporation 8F, No. 3-1, YuanQu Street, Nankang, Taipei 115, Taiwan, R.O.C. i Table of Contents CHAPTER 1 INTRODUCTION ............................................................................................. 1 Package Contents .............................................................................................................. 1 Key ...................................................................................................................................... 1 LEDs ................................................................................................................................... 2 Side Views .......................................................................................................................... 3 CHAPTER 2 INITIAL INSTALLATION .............................................................................. 5 Network Diagram and Device Start up Procedure ........................................................ 5 Mechanical Installation ..................................................................................................... 6 CHAPTER 3 SPECIFICATIONS ........................................................................................... 7 General Specification ........................................................................................................ 7 RF Characteristics ............................................................................................................. 7 Regulatory Requirements ................................................................................................. 8 Safety Information ............................................................................................................ 9 Device Surface Cleaning ................................................................................................. 11 Accessories ....................................................................................................................... 12 1 Chapter 1 Introduction SCE5164-B48 is an indoor, self-configuring sub 6G small cell, that is used to ensure improved performance using customer sub 6G network and extend 5G signal coverage at the customer premises. Package Contents Package will mainly include following items: 1 x SCE5164-B48 Device 1 x 19V 3A AC/DC Power Supply Adapter, and 1x 1.5M Power Cord 1 x 1.5M CAT.5E Ethernet Cable 1 x 10M GPS Antenna 1 x Wall Mount or Ceiling Mount Bracket and Screws Set If any of the above items are damaged or missing, please contact your dealer immediately. Key • Designed for indoor/enterprise scenario • Sub 6G access up to 32 active users • Support Sub 6G N48 access • 4 x LEDs for status display • 2 x Gigabit Ethernet Ports for LAN and WAN, and 1 x Reset Button • Internal N48 antennas • GPS SMA connector to connect GPS antenna • Support PoE++ function on WAN port • One SFP port reserved • 1PPS output port reserved 1 2 LEDs SCE5164-B48 has 4 LEDs indicators. Table below describes the definition of each of LED: 3 Side Views Top View Buttom and Back View Back Panel Power Input: 19V DC, 3A, Power Jack to Power Adaptor Reset Button 1 x Reset Button for System Reset or Factory Default on Side LAN One Gigabit Ethernet Port 4 WAN One Gigabit Ethernet Port, also supporting PoE++ GPS GPS SMA connector SFP One Gigabit SFP Port reserved 1PPS Output 1PPS output port reserved 5 Chapter 2 Initial Installation SCE5164-B48 is designed for Plug-n-Play(PnP) and self-configure which not require any software installation to use. When power on the device with pre provisioned configuration during production in factory, it will begin the device PnP and provision processes. The PnP and provision process will take approximate 20 min. to bring up and activate the device service. Network Diagram and Device Start up Procedure 2 6 Mechanical Installation SCE5164-B48 is designed for wall mount or ceiling mount. Before power on the device, it should have been mechanical installed well enough. The following procedure shows the process step by step. 1. Drill holes for 4 anchors in the wall or ceiling. 2. Insert 4 anchors into holes. 3. Place the bracket 4 wall/ceiling mount holes precisely to 4 installed anchors, and mount the 4 screws through bracket wall/ceiling mount holes into anchors and tighten the screws one by one. Anchor Screw Bracket 4. Mount the 4 back buttons of device into 4 device mounting holes of bracket, and push device slide down the side open cut of device mounting holes to fix it. Note: 1. If installing this device as wall mounting, please make sure Ethernet port is downside. 2. If using PoE injector for power supply, please make sure the power source of PoE injector is from power socket in house. 7 3. Wall mounting screw dimension specification is as below, unit is in mm: Chapter 3 Specifications General Specification Connectivity 1 x Gigabit Ethernet Port for WAN and/or PoE++ Power Supply External Power Adapter: Input: AC 100-240V~50/60Hz, 1.5A Output: 19V DC, 3A Operating Requirement Operating Temp. 0ºC to 40ºC Storage Temp. -5ºC to 45ºC Operating Humidity 5% to 90% Non-Condensing Storage Humidity 5% to 95% Non-Condensing Reset button 1 x Reset Button LED 4 x LED for Status. Housing 240mm(W)x240mm(H)x69mm(D) RF Characteristics Sub 6G Access RF Chipset Band QCA FSM10056 Band 48 8 Technology Tx Power 2T2R MIMO <30dBm Regulatory Requirements FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Th…

Text truncated - open the document above for the full version.

SercommCorporation中磊電子股份有限公司 TaipeiOffice:8F,No.3-1,YuanQuSt.,NanKang,Taipei115,Taiwan,R.O.C. TEL:886-2-2655-3988FAX:886-2-2655-3966 Date:2023-02-16 FCCID:P27-SCE5164-B48 Totheattentionof FederalCommunicationsCommission AuthorizationandEvaluationDivision AttestationStatements AttestationStatementsPart2.911(d)(5)(i)Filing SercommCorporationcertifiesthattheequipmentforwhichauthorizationissoughtisnot“covered” equipmentprohibitedfromreceivinganequipmentauthorizationpursuanttosection2.903ofthe FCCrules. AttestationStatementsPart2.911(d)(5)(ii)Filing SercommCorporationcertifiesthat,asofthedateofthefilingoftheapplication,theapplicantisnot identifiedontheCoveredListasanentityproducing“covered”equipment. Sincerelyyours, ----------------------------------------------------- SercommCorporation NickWu/Engineer TEL:886-2-2655-3988*2556 FAX:886-2-2655-3965 E-mail:[email protected]

U.S. Agent for Service of Process Attestation To the attention of Federal Communications Commission Authorization and Evaluation Division U.S. Agent Company Name: Sercomm USA Inc. FRN: 0026191601 Contact Name: Janus Hao Street Address: 42808 Christy St. Ste 231 City/Province/Zip: Fremont, CA 94538, U.S.A Telephone No: 5105656973 Email: [email protected] This letter is to confirm that we have accepted the responsibility to act as the designated U.S. Agent for service of process as required by §2.911(d)(7) on behalf of theApplicantnoted below. U.S. Agent Signature: Date:2023-02-19 Signed by Janus Hao Applicant Company name: Sercomm Corporation FCC ID: : P27-SCE5164-B48 Contact Name: Nick Wu Street Address: 8F, No. 3-1, YuanQu St, NanKang City/Province/Zip: Taipei, Taiwan, 115 Telephone No:+886-2-2655-3988 Email:[email protected] This letter is to confirm that the Applicant has designated theU.S Agentnoted above for the purpose of accepting service of process on their behalf as required by §2.911(d)(7). The Applicant further acknowledges acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission- related proceeding involving the equipment. Applicant Signature: Date:2023-02-20 Signed by Nick Wu

SercommCorporation中磊電子股份有限公司 TaipeiOffice:8F,No.3-1,YuanQuSt.,NanKang,Taipei115,Taiwan,R.O.C. TEL:886-2-2655-3988FAX:886-2-2655-3966 Date:2023-02-16 FCCID:P27-SCE5164-B48 Totheattentionof FederalCommunicationsCommission AuthorizationandEvaluationDivision PermanentConfidentialityRequest PursuanttoSections0.457and0.459oftheCommission’sRules,theApplicantherebyrequests confidentialtreatmentofinformationaccompanyingthisApplicationasoutlinedbelow: Schematics BlockDiagram OperationalDescription Partlist Tune-upProcedure Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarilyreleasedto thepublic.ThepublicdisclosureofthesemattersmightbeharmfultotheApplicantandprovide unjustifiedbenefitstoitscompetitors. TheApplicantunderstandsthatpursuanttoRule0.457,disclosureofthisApplicationandall accompanyingdocumentationwillnotbemadebeforethedateoftheGrantforthisapplication. Sincerelyyours, ----------------------------------------------------- SercommCorporation NickWu/Engineer TEL:886-2-2655-3988*2556 FAX:886-2-2655-3965 E-mail:[email protected]

SercommCorporation中磊電子股份有限公司 TaipeiOffice:8F,No.3-1,YuanQuSt.,NanKang,Taipei115,Taiwan,R.O.C. TEL:886-2-2655-3988FAX:886-2-2655-3966 Date:2023-02-16 FCCID:P27-SCE5164-B48 Totheattentionof FederalCommunicationsCommission AuthorizationandEvaluationDivision ConfidentialityRequest PursuanttoSections0.457and0.459ofthecommission’srules,werequestshort-termconfidential treatmentforthefollowinginformationuntil(180daysaftertheGrantDateofEquipment Authorization)inordertoensuresensitivebusinessinformationremainsconfidentialuntiltheactual marketingofthedevice: Externalphotos TestSetupphotos User’smanual InternalPhotos Sincerelyyours, ----------------------------------------------------- SercommCorporation NickWu/Engineer TEL:886-2-2655-3988*2556 FAX:886-2-2655-3965 E-mail:[email protected]

SercommCorporation中磊電子股份有限公司 TaipeiOffice:8F,No.3-1,YuanQuSt.,NanKang,Taipei115,Taiwan,R.O.C. TEL:886-2-2655-3988FAX:886-2-2655-3966 Date:2023-02-16 FCCID:P27-SCE5164-B48 AUTHORIZATIONLETTER Towhomitmayconcern: We,theundersigned,herebyauthorizeAndreaHsia/SupervisorofBureauVeritasConsumer ProductsServices(H.K.)Ltd.,TaoyuanBranch(BVCPSTaoyuan)ofTaiwantoactonourbehalfinall mannersrelatingtoFCCapplicationforequipmentauthorization,includingsigningofalldocuments relatingtothesematters.AnyandallactscarriedoutbyAndreaHsia/SupervisorofBVCPSTaoyuan onourbehalfshallhavethesameeffectasactsofourown. Ifyouhaveanyquestionsregardingtheauthorization,pleasedon’thesitatetocontactus. Sincerelyyours, ----------------------------------------------------- SercommCorporation NickWu/Engineer TEL:886-2-2655-3988*2556 FAX:886-2-2655-3965 E-mail:[email protected]

SercommCorporation中磊電子股份有限公司 TaipeiOffice:8F,No.3-1,YuanQuSt.,NanKang,Taipei115,Taiwan,R.O.C. TEL:886-2-2655-3988FAX:886-2-2655-3966 Date:2023-03-08 Re:SupersederequestforFCCID:P27-SCE5164-B48;Grantedon03/07/2023 ToWhomItMayConcern: Weregrettoinformyouthatduetostandardversionchange,wehavesubmittedthe wrongTestReport(CBSD)exhibittothefiling. Topreventmisunderstandingtothepublic,wewouldliketorequesttheFCCto supersedetheexhibitdescribedasTestReport(CBSD)rev. Ifyouhaveanyquestions,feelfreetocontactus.Thankyou. ----------------------------------------------------- SercommCorporation NickWu/Engineer TEL:886-2-2655-3988*2556 FAX:886-2-2655-3965 E-mail:[email protected]

Reference No.: BEIH-WTW-P22110003_EXT Page 1/6 CONSTRUCTION PHOTOS OF EUT Reference No.: BEIH-WTW-P22110003_EXT Page 2/6 Reference No.: BEIH-WTW-P22110003_EXT Page 3/6 Reference No.: BEIH-WTW-P22110003_EXT Page 4/6 Reference No.: BEIH-WTW-P22110003_EXT Page 5/6 Reference No.: BEIH-WTW-P22110003_EXT Page 6/6

FCC ID: P27-SCE5164-B48 FCC Label Location Back Side Label Location

Reference No.: BEIH-WTW-P22110003_INT Page 1/18 CONSTRUCTION PHOTOS OF EUT Reference No.: BEIH-WTW-P22110003_INT Page 2/18 Reference No.: BEIH-WTW-P22110003_INT Page 3/18 Reference No.: BEIH-WTW-P22110003_INT Page 4/18 Reference No.: BEIH-WTW-P22110003_INT Page 5/18 Reference No.: BEIH-WTW-P22110003_INT Page 6/18 Reference No.: BEIH-WTW-P22110003_INT Page 7/18 Reference No.: BEIH-WTW-P22110003_INT Page 8/18 Reference No.: BEIH-WTW-P22110003_INT Page 9/18 Reference No.: BEIH-WTW-P22110003_INT Page 10/18 Reference No.: BEIH-WTW-P22110003_INT Page 11/18 Reference No.: BEIH-WTW-P22110003_INT Page 12/18 Reference No.: BEIH-WTW-P22110003_INT Page 13/18 Reference No.: BEIH-WTW-P22110003_INT Page 14/18 Reference No.: BEIH-WTW-P22110003_INT Page 15/18 Reference No.: BEIH-WTW-P22110003_INT Page 16/18 Reference No.: BEIH-WTW-P22110003_INT Page 17/18 Reference No.: BEIH-WTW-P22110003_INT Page 18/18

Report No.: MFBEIH-WTW-P22110003 Page No. 1 / 5 Report Format Version: 6.1.1 FCC RF Exposure Report Report No.: MFBEIH-WTW-P22110003 FCC ID: P27-SCE5164-B48 Test Model: SCE5164-B48 Received Date: Nov. 03, 2022 Test Date: Dec. 05 ~ Dec. 30, 2022 Issued Date: Feb. 22, 2023 Applicant: Sercomm Corp. Address: 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Designation Number: 788550 / TW0003 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: MFBEIH-WTW-P22110003 Page No. 2 / 5 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 3 Calculation Result of Maximum Density Power ................................................................................ 5 Report No.: MFBEIH-WTW-P22110003 Page No. 3 / 5 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued MFBEIH-WTW-P22110003 Original release Feb. 22, 2023 Report No.: MFBEIH-WTW-P22110003 Page No. 4 / 5 Report Format Version: 6.1.1 1 Certificate of Conformity Product: Bridgestone Brand: Sercomm Test Model: SCE5164-B48 Sample Status: Engineering sample Applicant: Sercomm Corp. Test Date: Dec. 05 ~ Dec. 30, 2022 FCC Rule Part: FCC Part 2 (Section 2.1091) Standards: KDB 447498 D01 General RF Exposure Guidance v06 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date:Feb. 22, 2023 Celine Chou / Senior Specialist Approved by : , Date:Feb. 22, 2023 Jeremy Lin / Project Engineer Report No.: MFBEIH-WTW-P22110003 Page No. 5 / 5 Report Format Version: 6.1.1 2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 3 Calculation Result of Maximum Density Power Function Frequency Band (MHz) EIRP (dBm) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) NR Band 48 3555.00-3694.98 35.45 20 0.698 1 Note: Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. --- END ---

Report No.: RFBEIH-WTW-P22110003 Page No. 1 / 92 Report Format Version: 6.1.1 FCC Test Report (Part 96 – NR B48) Report No.: RFBEIH-WTW-P22110003 FCC ID: P27-SCE5164-B48 Test Model: SCE5164-B48 Received Date: Nov. 03, 2022 Test Date: Dec. 05 ~ Dec. 30, 2022 Issued Date: Feb. 22, 2023 Applicant: Sercomm Corp. Address: 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Designation Number: 788550 / TW0003 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: RFBEIH-WTW-P22110003 Page No. 2 / 92 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Test Mode Applicability and Tested Channel Detail ............................................................................ 9 3.3 Description of Support Units .............................................................................................................. 11 3.3.1 Configuration of System under Test .................................................................................................. 12 3.4 General Description of Applied Standards and References .............................................................. 13 4 Test Types and Results ...................................................................................................................... 14 4.1 Maximum Output Power Measurement ............................................................................................ 14 4.1.1 Limits of Maximum Output Power Measurement .............................................................................. 14 4.1.2 Test Setup .......................................................................................................................................... 14 4.1.3 Test Instruments ................................................................................................................................ 14 4.1.4 Test Procedures ................................................................................................................................. 15 4.1.5 Deviation from Test Standard ............................................................................................................ 15 4.1.6 EUT Operating Conditions ................................................................................................................. 15 4.1.7 Test Results ....................................................................................................................................... 16 4.2 Maximum Power Spectral Density Measurement ............................................................................. 22 4.2.1 Limits of Maximum Power Spectral Density Measurement ............................................................... 22 4.2.2 Test Setup .......................................................................................................................................... 22 4.2.3 Test Instruments ................................................................................................................................ 22 4.2.4 Test Procedure ............................................................…

Text truncated - open the document above for the full version.

Report No.: RFBEIH-WTW-P22110003 Page No. 64 / 92 Report Format Version: 6.1.1 NR Band 48, Channel Bandwidth 10MHz Channel 641666 (3624.99MHz) Frequency Range : 9kHz ~ 1GHz Frequency Range : 1GHz ~ 20GHz Frequency Range : 20GHz ~ 40GHz Note: 1. The signal at 9 kHz is IF signal from spectrum analyzer. 2. Ref Lvl Offset = Attenuator (6dB) + Cable loss (2dB) + 10log(Numbers Ant ) (3.01dB) = 11.01dB Report No.: RFBEIH-WTW-P22110003 Page No. 65 / 92 Report Format Version: 6.1.1 NR Band 48, Channel Bandwidth 10MHz Channel 646332 (3694.98MHz) Frequency Range : 9kHz ~ 1GHz Frequency Range : 1GHz ~ 20GHz Frequency Range : 20GHz ~ 40GHz Note: 1. The signal at 9 kHz is IF signal from spectrum analyzer. 2. Ref Lvl Offset = Attenuator (6dB) + Cable loss (2dB) + 10log(Numbers Ant ) (3.01dB) = 11.01dB Report No.: RFBEIH-WTW-P22110003 Page No. 66 / 92 Report Format Version: 6.1.1 NR Band 48, Channel Bandwidth 20MHz Channel 637334 (3560.01MHz) Channel 641666 (3624.99MHz) Channel 646000 (3690.00MHz) Ref Lvl Offset = Attenuator (3dB) + Cable loss (2dB) + 10log(Numbers Ant ) (3.01dB) = 8.01dB Report No.: RFBEIH-WTW-P22110003 Page No. 67 / 92 Report Format Version: 6.1.1 NR Band 48, Channel Bandwidth 20MHz Channel 637334 (3560.01MHz) Frequency Range : 9kHz ~ 1GHz Frequency Range : 1GHz ~ 20GHz Frequency Range : 20GHz ~ 40GHz Note: 1. The signal at 9 kHz is IF signal from spectrum analyzer. 2. Ref Lvl Offset = Attenuator (6dB) + Cable loss (2dB) + 10log(Numbers Ant ) (3.01dB) = 11.01dB Report No.: RFBEIH-WTW-P22110003 Page No. 68 / 92 Report Format Version: 6.1.1 NR Band 48, Channel Bandwidth 20MHz Channel 641666 (3624.99MHz) Frequency Range : 9kHz ~ 1GHz Frequency Range : 1GHz ~ 20GHz Frequency Range : 20GHz ~ 40GHz Note: 1. The signal at 9 kHz is IF signal from spectrum analyzer. 2. Ref Lvl Offset = Attenuator (6dB) + Cable loss (2dB) + 10log(Numbers Ant ) (3.01dB) = 11.01dB Report No.: RFBEIH-WTW-P22110003 Page No. 69 / 92 Report Format Version: 6.1.1 NR Band 48, Channel Bandwidth 20MHz Channel 646000 (3690.00MHz) Frequency Range : 9kHz ~ 1GHz Frequency Range : 1GHz ~ 20GHz Frequency Range : 20GHz ~ 40GHz Note: 1. The signal at 9 kHz is IF signal from spectrum analyzer. 2. Ref Lvl Offset = Attenuator (6dB) + Cable loss (2dB) + 10log(Numbers Ant ) (3.01dB) = 11.01dB Report No.: RFBEIH-WTW-P22110003 Page No. 70 / 92 Report Format Version: 6.1.1 NR Band 48, Channel Bandwidth 30MHz Channel 637668 (3565.02MHz) Channel 641666 (3624.99MHz) Channel 645666 (3684.99MHz) Ref Lvl Offset = Attenuator (3dB) + Cable loss (2dB) + 10log(Numbers Ant ) (3.01dB) = 8.01dB Report No.: RFBEIH-WTW-P22110003 Page No. 71 / 92 Report Format Version: 6.1.1 NR Band 48, Channel Bandwidth 30MHz Channel 637668 (3565.02MHz) Frequency Range : 9kHz ~ 1GHz Frequency Range : 1GHz ~ 20GHz Frequency Range : 20GHz ~ 40GHz Note: 1. The signal at 9 kHz is IF signal from spectrum analyzer. 2. Ref Lvl Offset = Attenuator (6dB) + Cable loss (2dB) + 10log(Numbers Ant ) (3.01dB) = 11.01dB Report No.: RFBEIH-WTW-P22110003 Page No. 72 / 92 Report Format Version: 6.1.1 NR Band 48, Channel Bandwidth 30MHz Channel 641666 (3624.99MHz) Frequency Range : 9kHz ~ 1GHz Frequency Range : 1GHz ~ 20GHz Frequency Range : 20GHz ~ 40GHz Note: 1. The signal at 9 kHz is IF signal from spectrum analyzer. 2. Ref Lvl Offset = Attenuator (6dB) + Cable loss (2dB) + 10log(Numbers Ant ) (3.01dB) = 11.01dB Report No.: RFBEIH-WTW-P22110003 Page No. 73 / 92 Report Format Version: 6.1.1 NR Band 48, Channel Bandwidth 30MHz Channel 645666 (3684.99MHz) Frequency Range : 9kHz ~ 1GHz Frequency Range : 1GHz ~ 20GHz Frequency Range : 20GHz ~ 40GHz Note: 1. The signal at 9 kHz is IF signal from spectrum analyzer. 2. Ref Lvl Offset = Attenuator (6dB) + Cable loss (2dB) + 10log(Numbers Ant ) (3.01dB) = 11.01dB Report No.: RFBEIH-WTW-P22110003 Page No. 74 / 92 Report Format Version: 6.1.1 NR Band 48, Channel Bandwidth 40MHz Channel 638000 (3570.00MHz) Channel 641666 (3624.99MHz) Channel 645332 (3679.98MHz) Ref Lvl Offset = Attenuator (3dB) + Cable loss (2dB) + 10log(Numbers Ant ) (3.01dB) = 8.01dB Report No.: RFBEIH-WTW-P22110003 Page No. 75 / 92 Report Format Version: 6.1.1 NR Band 48, Channel Bandwidth 40MHz Channel 638000 (3570.00MHz) Frequency Range : 9kHz ~ 1GHz Frequency Range : 1GHz ~ 20GHz Frequency Range : 20GHz ~ 40GHz Note: 1. The signal at 9 kHz is IF signal from spectrum analyzer. 2. Ref Lvl Offset = Attenuator (6dB) + Cable loss (2dB) + 10log(Numbers Ant ) (3.01dB) = 11.01dB Report No.: RFBEIH-WTW-P22110003 Page No. 76 / 92 Report Format Version: 6.1.1 NR Band 48, Channel Bandwidth 40MHz Channel 641666 (3624.99MHz) Frequency Range : 9kHz ~ 1GHz Frequency Range : 1GHz ~ 20GHz Frequency Range : 20GHz ~ 40GHz Note: 1. The signal at 9 kHz is IF signal from spectrum analyzer. 2. Ref Lvl Offset = Attenuator (6dB) + Cable loss (2dB) + 10log(Numbers Ant ) (3.01dB) = 11.01dB Report No.: RFBEIH-WTW-P22110003 Page No. 77 / 92 Report Format Version: 6.1.1 NR Band 48, Channel Bandwidth 40MHz Channel 645332 (3679.98MHz) Frequency Range : 9kHz ~ 1GHz Frequency Range : 1GHz ~ 20GHz Frequency Range : 20GHz ~ 40GHz Note: 1. The signal at 9 kHz is IF signal from spectrum analyzer. 2. Ref Lvl Offset = Attenuator (6dB) + Cable loss (2dB) + 10log(Numbers Ant ) (3.01dB) = 11.01dB Report No.: RFBEIH-WTW-P22110003 Page No. 78 / 92 Report Format Version: 6.1.1 4.8 Radiated Emission Measurement 4.8.1 Limits of Radiated Emission Measurement The power of any emissions below 3530 MHz or above 3…

Text truncated - open the document above for the full version.