P270V910Wireless Network Camera

Network Camera User’s Guide Regulatory Approvals FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica- tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Channel The Wireless Channel sets the radio frequency used for communication. Access Points use a fixed Channel. You can select the Channel used. This allows you to choose a Channel which provides the least interference and best performance. In the USA and Canada, 11 channel are available. If using multiple Access Points, it is better if adjacent Access Points use different Channels to reduce interference. In "Infrastructure" mode, Wireless Stations normally scan all Channels, looking for an Access Point. If more than one Access Point can be used, the one with the strongest signal is used. (This can only happen within an ESS.) If using "Ad-hoc" mode (no Access Point), all Wireless stations should be set to use the same Channel. However, most Wireless stations will still scan all Channels to see if there is an existing "Ad-hoc" group they can join. Note:This equipment marketed in USA is restricted by firmware to only operate on 2.4G channel 1-11 . Table of Contents CHAPTER 1 INTRODUCTION..............................................................................................1 Overview............................................................................................................................1 Models................................................................................................................................3 Physical Details - Network Camera.................................................................................4 Package Contents..............................................................................................................5 CHAPTER 2 BASIC SETUP ...................................................................................................6 System Requirements........................................................................................................6 Installation - Network Camera.........................................................................................6 Setup using the Windows Wizard....................................................................................8 CHAPTER 3 VIEWING LIVE VIDEO ................................................................................14 Overview.......................................................................................................................... 14 Requirements...................................................................................................................14 Connecting to a Camera on your LAN ..........................................................................14 Connecting to a Camera via the Internet......................................................................16 Viewing Live Video.........................................................................................................18 CHAPTER 4 ADVANCED VIEWING SETUP...................................................................20 Introduction..................................................................................................................... 20 Adjusting the Video Image.............................................................................................20 Controlling User Access to the Video Stream...............................................................23 Making Video available from the Internet ....................................................................24 Viewing Live Video via the Internet ..............................................................................26 Motion Detection Alerts..................................................................................................28 CHAPTER 5 WEB-BASED MANAGEMENT...............................................................…

Text truncated - open the document above for the full version.

55 44 33 22 11 D D C C B B A A e l t i T v e R r e b m u N t n e m u c o D e z i S t e e h S : e t a D f o > e d o C v e R < > c o D < h g f B 1 1 6 0 0 2 , 3 2 t s u g u A , y a d s e n d e W e l t i T v e R r e b m u N t n e m u c o D e z i S t e e h S : e t a D f o > e d o C v e R < > c o D < h g f B 1 1 6 0 0 2 , 3 2 t s u g u A , y a d s e n d e W e l t i T v e R r e b m u N t n e m u c o D e z i S t e e h S : e t a D f o > e d o C v e R < > c o D < h g f B 1 1 6 0 0 2 , 3 2 t s u g u A , y a d s e n d e W N O I T A M R O F N I Y R A T E I R P O R P m a r g a i D k c o l B T 1 0 8 B M . p r o C m m o c r e S MINIPCI connector 0 3 1 1 W T E N T M O R P E E 2 2 4 2 C R O L F L l a t s y r C M 0 4 r e t l i F W A S 6 2 3 2 C R O L F L F P B F P B a n n e t n A H C T I W S 1 a n n e t n A 2 a n n e t n A Operating Frequency in USA: 2412-2462 MHz Operating Frequency in Europe: 2412-2472 MHz

NC802APT/NC402APT Block Diagram Operating Frequency in USA: 2412-2462 MHz Operating Frequency in Europe: 2412-2472 MHz

SerComm Corporation磊 Taipei Office: 8F, No.3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. TEL: 886-2-2655-3988 FAX: 886-2-2655-3966 Chu Nan Office: 3F, No. 81, YuYi Rd., Chu-Nan, Miao-Li 350, Taiwan, R.O.C. TEL: 886-37-585-899 FAX: 886-37-585-000 Date: 2006-08-15 Declaration of Authorization We; SerComm Corporation; local at 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C., is declared the Exclusive Certification Corporation; local at 4F-2, no. 28, Lane 78, Xing-ai Rd., Neihu, Taipei City 114, Taiwan, R.O.C., is authorized to apply for Certification of the following product(s): Product description: Wireless Network Camera Type designation: NC802APT, NC802A, NC802AN, ICA-550W, ICA-150W, ALL2250, ALL2211, RV-E1 Trademark: SerComm, Planet, ALLNET or Blank. on our behalf. Yours sincerely, Ronnie Cheng Associate Manager / R&D Division SerComm Corporation 8F, No. 3-1, YuanQu St., NanKang Taipei 115, Taiwan, R.O.C. TEL: 886-2-2655-3988 #2547 FAX: 886-2-2655-3975 E-Mail: [email protected] RF-160, Issue 01.,

Request for non-disclosure RF_501_02 SerComm Corporation 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. To: Telefication B.V. Attn: Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for non-disclosure FCC ID: P270V910 Reference number: NC802APT, NC802A, NC802AN, ICA-550W, ICA-150W, ALL2250, ALL2211, RV-E1 Date: Aug. 07, 2006 Dear FCC TCB, Pursuant to 47 CFR Section 0.459(a) & (b), SerComm Corporation hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application for FCC ID: P270V910 a. Schematic diagrams b. Operational description c. Bill Of Materials Above materials contain secrets, proprietary and technical information, which would customarily be quarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. SerComm Corporation understands that pursuant to 47 CFR section 0.457 (d) (1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. Yours sincerely, Ronnie Cheng Associate Manager / R&D Division TEL: 886-2-2655-3988 #2547 FAX: 886-2-2655-3975 E-Mail: [email protected]

Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Aug. 08, 2006 1 of 9 FCC Test Report: FI06032703-A Appendix A. Photographs of EUT 06062703-A 06062703-A

Exclusive Certification Corp.Tel:886-2-2792-3366 Fax:886-2-2792-1100Issued date: Aug. 08, 2006 1 of 9 FCC Test Report: FI06032703-A 06062703-A

Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Aug. 08, 2006 2 of 9 FCC Test Report: FI06032703-A 06062703-A 06062703-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Aug. 08, 2006 3 of 9 FCC Test Report: FI06032703-A 06062703-A 06062703-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Aug. 08, 2006 4 of 9 FCC Test Report: FI06032703-A 06062703-A 06062703-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Aug. 08, 2006 5 of 9 FCC Test Report: FI06032703-A 06062703-A 06062703-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Aug. 08, 2006 6 of 9 FCC Test Report: FI06032703-A 06062703-A 06062703-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Aug. 08, 2006 7 of 9 FCC Test Report: FI06032703-A 06062703-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Aug. 08, 2006 8 of 9 FCC Test Report: FI06032703-A 06062703-A 06062703-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Aug. 08, 2006 9 of 9 FCC Test Report: FI06032703-A 06062703-A 06062703-A

1.1. Test Result of RF Exposure Evaluation . Product: Wireless Network Camera . Test Item: RF Exposure Evaluation Data . Test site: OATSI-SD . Test Mode: Transmit / Receive 1.1.1. Antenna Gain The maximum Gain is 2.0 dBi. 1.1.2. EUT Operation condition Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 1.1.3. Output Power into Antenna & RF Exposure Evaluation Distance Modulation Standard: IEEE 802.11b Test Date: Jul. 26, 2006 Temperature: 25 Humidity: 68 Channel Channel Frequency (MHz) Output Power to Antenna (dBm) Power Density (S) (mW/cm 2 ) 01 2412 18.25 0.021 06 2437 18.29 0.021 11 2462 18.28 0.021 Modulation Standard: IEEE 802.11g Test Date: Jul. 26, 2006 Temperature: 25 Humidity: 68 Channel Channel Frequency (MHz) Output Power to Antenna (dBm) Power Density (S) (mW/cm 2 ) 01 2412 14.06 0.008 06 2437 14.02 0.008 11 2462 14.01 0.008 The MPE is calculated as 0.021 mW / cm 2 < limit 1 mW / cm 2 . So, RF exposure limit warning or SAR test are not required. For 2412-2462 MHz, the EUT will only be used with a separation of 20cm or greater between the antenna and nearby persons and can therefore be considered a mobile transmitter per 47CFR2.1091 (b). The RF Exposure Information page from the manual is included here for reference.

Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Aug. 08, 2006 1 of 54 FCC Test Report: FI06062703-A FCC TEST REPORT according to FCC Rules and Regulations Part 15 Subpart C Laboratory Accreditation 1332 ‚ The test result refers exclusively to the test presented test model / sample., ‚ Without written approval of Exclusive Certification Corp. the test report shall not be reproduced except in full. ‚ The EUT is also considered as a kind of computer peripheral, because the connection to computer is necessary for typical use. It has been verified to comply with the requirements of FCC Part 15, Subpart B, Class B (DoC). The test report has been issued separately. Applicant SerComm Corporation Address 3F No.81 YuYi Rd. Chu-Nan Miao-Li 350 Taiwan R.O.C. Equipment Wireless Network Camera Model No. NC802APT Series No. ICA-550W , ALL2250 , RV-E1 , NC802A , ICA-150W , ALL2211 , NC802AN FCC ID P270V910 Trade Name SerComm / Planet / ALLNET Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Aug. 08, 2006 2 of 54 FCC Test Report: FI06062703-A Contents CERTIFICATE OF COMPLIANCE ................................................................................................................ 4 1. Report of Measurements and Examinations .................................................................................... 5 1.1 List of Measurements and Examinations ................................................................................... 5 2. Test Configuration of Equipment under Test ................................................................................... 6 2.1 Feature of Equipment under Test............................................................................................... 6 2.2 Test Mode and Test Software.....................................................................................................7 2.3 Description of Test System......................................................................................................... 7 2.4 Connection Diagram of Test System.......................................................................................... 7 2.5 RF Specifications ....................................................................................................................... 8 2.6 The series name and model ......................................................................................................8 2.7 History of this test report ............................................................................................................ 8 2.8 General Information of Test........................................................................................................ 9 3. Antenna Requirements.....................................................................................................................10 3.1 Standard Applicable .................................................................................................................10 3.2 Antenna Construction and Directional Gain............................................................................. 10 4. Test of Conducted Emission............................................................................................................ 11 4.1 Test Limit .................................................................................................................................. 11 4.2 Test Procedures ....................................................................................................................... 11 4.3 Typical Test Setup ....................................................................................................................12 4.4 Measurement equipment ......................................................................................................... 12 4.5 Test Result and Data................................................................................................................13 4.6 Test Photographs .....................................................................................................................15 5. Test of Radiated Emission ...............................................................................................................16 5.1 Test Limit .................................................................................................................................. 16 5.2 Test Procedures .......................................................................................................................17 5.3 Typical Test Setup ....................................................................................................................18 5.4 Measurement equipment ......................................................................................................... 18 5.5 Test Result and Data................................................................................................................19 5.6 Test Photographs .....................................................................................................................35 6. 6dB Bandwidth Measurement Data .................................................................................................36 6.1 Test Limit .................................................................................................................................. 36 6.2 Test Procedures .......................................................................................................................36 6.3 Test Setup Layout ....................................................................................................................36 6.4 Measurement equipment ......................................................................................................... 36 6.5 Test Result and Data................................................................................................................36 7. Maximum Peak Output Po…

Text truncated - open the document above for the full version.

Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Aug. 08, 2006 15 of 54 FCC Test Report: FI06062703-A 4.6 Test Photographs Front View Rear View Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Aug. 08, 2006 35 of 54 FCC Test Report: FI06062703-A 5.6 Test Photographs Front View Rear View