P27DLC200SUSDigital Life Controller

i DLC-200S Digital Life Controller User Guide ii Table of Contents CHAPTER 1 INTRODUCTION .............................................................................................. 1 Features .............................................................................................................................. 1 LEDs ................................................................................................................................... 2 CHAPTER 2 INITIAL INSTALLATION............................................................................... 4 Requirements ..................................................................................................................... 4 Procedure ........................................................................................................................... 4 APPENDIX A SPECIFICATIONS .......................................................................................... 6 Digital Life Controller ....................................................................................................... 6 Regulatory Approvals ....................................................................................................... 6 Copyright  2014. All Rights Reserved. Document Version: 1.0 All trademarks and trade names are the properties of their respective owners. 1 Chapter 1 Introduction This Chapter provides an overview of the Controller's features and capabili- ties. Congratulations on the purchase of your new device. The Digital Life controller uses multiple radios to control and manage appliances, lighting; remotely lock or unlock doors and other security and automation services. In addition, the controller even includes 24-hour backup and advanced diagnostics. Ultimately, this device is designed for users to gain remote, wireless access to cameras, window and door sensors, smoke detectors, thermostats and other appliance controls. A professional initial installation is required. Features • NAND 4GB Flash • DDR3 RAM 1GB • One WAN port with RJ45 connector • One LAN port with RJ45 connector (LAN is disable, for debug only) • PoE (802.3at Type) Support • Front Panel LEDs • One button for turning off sounder • 24-hour battery backup • One Micro SD card slot (Optional) • Internal antenna for 3G, WiFi, DECT, Z-Wave, ZigBee, One-way Radio and Two-way Radio 1 2 LEDs Top-mounted LEDs The device has five LEDs. Power • On (Green) - Power On • On (Red) - Power Failure • Off - Power Off Battery • On (Green) - The battery is installed • On (Red) - The battery needs to be Replaced. • Off – Battery not installed. System • On (Green) - System is good • On (Red) - There is a system problem • On (Yellow) - The system is in Maintenance • Flashing - Indicates Radio Frequency (RF) Jamming Wireless Broadband • On (Green) - Wireless connection established. • Off - No active connection on the corresponding LAN port. Wireline Broadband • On (Green) - Wireline connection established. • Off - No active connection on the WAN port. 3 Rear Panel LAN Port The standard Ethernet cable can provide the power to the device by connecting the device to your router or PC. WAN Port Connect this port to your ADSL connection. Micro SD Card (Optional) Insert the SD card into the slot, if required. SIM Card Slot Insert the SIM card for mobile broadband access. 4 Chapter 2 Initial Installation This Chapter covers the software installation of the Controller. Requirements • Use standard 10/100BaseT network (UTP) cables with RJ45 connectors. Procedure 1. Choose an Installation Site Select a suitable place to install the Controller. Note: You can open the front cover by removing the two screws with a screwdriver if re- quired. Note: Use a screwdriver to remove the two screws of the battery cover before installing the battery. 2 5 2. Connect Ethernet Cables Route a standard Ethernet cable from the LAN port through the openings to connect to the device. Route a standard Ethernet cable from the WAN port through the openings to connect to the ADSL router. 3. Check the LEDs • The Power LED should be ON. • The Wireless Broadband LED should be ON. 6 Appendix A Specifications Digital Life Controller Model Digital Life Controller Network Interface Two Ethernet 10/100BaseT (RJ45) Ports: One RJ-45 for WAN One RJ-45 for LAN (LAN is disable, for debug only) Operating Temperature -10° C to 55° C Storage Temperature -45° C to 85° C Micro SD Card (Op- tional) One SD Card slot Button 1 LEDs 5 Power Power Over Ethernet (PoE) Battery Backup support Regulatory Approvals FCC Statement This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica- tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). A 7 FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This device complies with Part 15 of the FCC Rules. Operatio…

Text truncated - open the document above for the full version.

SerComm Corporation中磊電子股份有限公司 Taipei Office: 8F, No.3‐1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. TEL: 886‐2‐2655‐3988 FAX: 886‐2‐2655‐3966 Declaration for no non‐US channel operation Date: May 18, 2015 We, Sercomm Corp. declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non‐US channels in all the operational mode(s) for the following product. FCC ID: P27DLC200SUS If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you! ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ Sercomm Corporation Kevin Kuo/ Sr. Manager TEL: 886‐2‐2655‐3988*2631 FAX: 886‐2‐2655‐3965 E‐mail: [email protected]

SerComm Corporation中磊電子股份有限公司 Taipei Office: 8F, No.3‐1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. TEL: 886‐2‐2655‐3988 FAX: 886‐2‐2655‐3966 Date: 2015‐05‐08 FCC ID: P27DLC200SUS AUTHORIZATION LETTER To whom it may concern: We, the undersigned, hereby authorize Amanda Wu/ Senior Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Amanda Wu/ Senior Specialist of BV CPS Taoyuan on our behalf shall have the same effect as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ Sercomm Corporation Kevin Kuo/ Sr. Manager TEL: 886‐2‐2655‐3988*2631 FAX: 886‐2‐2655‐3965 E‐mail: [email protected]

SerComm Corporation中磊電子股份有限公司 Taipei Office: 8F, No.3‐1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. TEL: 886‐2‐2655‐3988 FAX: 886‐2‐2655‐3966 Date: 2015‐05‐18 FCC ID: P27DLC200SUS To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description Part list Tune‐up Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ Sercomm Corporation Kevin Kuo/ Sr. Manager TEL: 886‐2‐2655‐3988*2631 FAX: 886‐2‐2655‐3965 E‐mail: [email protected]

SerComm Corporation中磊電子股份有限公司 Taipei Office: 8F, No.3‐1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. TEL: 886‐2‐2655‐3988 FAX: 886‐2‐2655‐3966 Date: 2015‐05‐18 FCC ID: P27DLC200SUS To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we request short‐term confidential treatment for the following information until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: External photos Test Setup photos User’s manual Internal Photos Sincerely yours, ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ Sercomm Corporation Kevin Kuo/ Sr. Manager TEL: 886‐2‐2655‐3988*2631 FAX: 886‐2‐2655‐3965 E‐mail: [email protected]

Page 1 CONSTRUCTION PHOTOS OF EUT

FCC Label Location (at bottom) C1.88x2 Manufacturing Date: Sercomm

Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30

Report No.: SA150116D04 Page No. 1 / 6 Report Format Version: 6.1.1 RF Exposure Report Report No.: SA150116D04 FCC ID: P27DLC200SUS Test Model: DLC-200SUS Series Model: DLC-200Sxxx (where “x” is blank, number or any characters) Received Date: Jan. 16, 2015 Test Date: Jan. 26 ~ Jul. 17, 2015 Issued Date: Jul. 23, 2015 Applicant: Sercomm Corp. Address: 8F, No. 3-1, YuangQu St., NanKang, Taipei 115, Taiwan, R.O.C. (NanKang Software Park) Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C.) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: SA150116D04 Page No. 2 / 6 Report Format Version: 6.1.1 Table of Contents Release Control Record ............................................................................................................................. 3 1 Certificate of Conformity ................................................................................................................. 4 2 RF Exposure .................................................................................................................................... 5 2.1 Limits For Maximum Permissible Exposure (MPE) .......................................................................... 5 2.2 Mpe Calculation Formula ................................................................................................................ 5 2.3 Classification .................................................................................................................................. 5 3 Calculation Result Of Maximum Conducted Power ....................................................................... 6 Report No.: SA150116D04 Page No. 3 / 6 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued SA150116D04 Original release. Jul. 23, 2015 Report No.: SA150116D04 Page No. 4 / 6 Report Format Version: 6.1.1 1 Certificate of Conformity Product: Digital Life Controller Brand: Sercomm Test Model: DLC-200SUS Series Model: DLC-200Sxxx (where “x” is blank, number or any characters) Sample Status: Engineering sample Applicant: Sercomm Corp. Test Date: Jan. 26 ~ Jul. 17, 2015 Standards: FCC Part 2 (Section 2.1091) KDB 447498 D03 IEEE C95.1 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Jul. 23, 2015 Celia Chen / Senior Specialist Approved by : , Date: Jul. 23, 2015 Rex Lai / Assistant Manager Report No.: SA150116D04 Page No. 5 / 6 Report Format Version: 6.1.1 2 RF Exposure 2.1 Limits For Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 25cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA150116D04 Page No. 6 / 6 Report Format Version: 6.1.1 3 Calculation Result Of Maximum Conducted Power Function Frequency Band (MHz) Max Power (dBm) Max Power (mW) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) WLAN 2412-2462 29.80 954.793 6.96 25 0.6038 1 Zigbee 2405-2475 15.98 39.628 3.27 25 0.0107 1 LPRF 903.248-927.715 10.76 11.912 1.22 25 0.0020 0.602 DECT 1920-1930 15.98 39.628 0 25 0.0050 1 NOTE: WLAN: Directional gain = 3.95dBi + 10log(2) = 6.96dBi Frequency Band (MHz) ERP (dBm) EIRP (dBm) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) EGPRS: 824.2MHz ~ 848.8MHz 29.15 31.30 25 0.1718 0.550 WCDMA: 826.4MHz ~ 846.6MHz 23.57 25.72 25 0.0475 0.551 Note: EIRP = ERP + 2.15 Frequency Band (MHz) EIRP (dBm) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) EGPRS: 1850.2MHz ~ 1909.8MHz 30.64 25 0.1475 1 WCDMA: 1852.4MHz ~ 1907.6MHz 23.87 25 0.0310 1 Conclusion: The formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LP…

Text truncated - open the document above for the full version.

Report No.: RF150116D04 Page No. 1 / 53 Report Format Version: 6.1.1 FCC Test Report Report No.: RF150116D04 FCC ID: P27DLC200SUS Test Model: DLC-200SUS Series Model: DLC-200Sxxx (where “x” is blank, number or any characters) Received Date: Jan. 16, 2015 Test Date: Jan. 26 ~ Mar. 17, 2015 Issued Date: Mar. 23, 2015 Applicant: Sercomm Corp. Address: 8F, No. 3-1, YuangQu St., NanKang, Taipei 115, Taiwan, R.O.C. (NanKang Software Park) Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C.) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF150116D04 Page No. 2 / 53 Report Format Version: 6.1.1 Table of Contents Release Control Record ............................................................................................................................. 4 1 Certificate of Conformity ................................................................................................................. 5 2 Summary of Test Results ................................................................................................................ 6 2.1 Measurement Uncertainty............................................................................................................... 6 2.2 Modification Record........................................................................................................................ 6 3 General Information ......................................................................................................................... 7 3.1 General Description of EUT ............................................................................................................ 7 3.2 Description of Test Modes .............................................................................................................. 9 3.2.1 Test Mode Applicability and Tested Channel Detail ........................................................................ 10 3.3 Duty Cycle of Test Signal .............................................................................................................. 12 3.4 Description of Support Units ......................................................................................................... 13 3.4.1 Configuration of System under Test .............................................................................................. 13 3.5 General Description of Applied Standards ..................................................................................... 14 4 Test Types and Results.................................................................................................................. 15 4.1 Radiated Emission and Bandedge Measurement.......................................................................... 15 4.1.1 Limits of Radiated Emission and Bandedge Measurement ............................................................ 15 4.1.2 Test Instruments ........................................................................................................................... 16 4.1.3 Test Procedures ........................................................................................................................... 17 4.1.4 Deviation from Test Standard ........................................................................................................ 17 4.1.5 Test Set Up................................................................................................................................... 18 4.1.6 EUT Operating Conditions ............................................................................................................ 18 4.1.7 Test Results .................................................................................................................................. 19 4.2 Conducted Emission Measurement .............................................................................................. 32 4.2.1 Limits of Conducted Emission Measurement ................................................................................. 32 4.2.2 Test Instruments ........................................................................................................................... 32 4.2.3 Test Procedures ........................................................................................................................... 33 4.2.4 Deviation from Test Standard ........................................................................................................ 33 4.2.5 Test Setup .................................................…

Text truncated - open the document above for the full version.

Report No.: RF150116D04-3 Page No. 1 / 40 Report Format Version: 6.1.1 FCC Test Report Report No.: RF150116D04-3 FCC ID: P27DLC200SUS Test Model: DLC-200SUS Series Model: DLC-200Sxxx (where “x” is blank, number or any characters) Received Date: Jan. 16, 2015 Test Date: Jan. 26 ~ Jul. 17, 2015 Issued Date: Jul. 23, 2015 Applicant: Sercomm Corp. Address: 8F, No. 3-1, YuangQu St., NanKang, Taipei 115, Taiwan, R.O.C. (NanKang Software Park) Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C.) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF150116D04-3 Page No. 2 / 40 Report Format Version: 6.1.1 Table of Contents Release Control Record ............................................................................................................................. 4 1 Certificate of Conformity ................................................................................................................. 5 2 Summary of Test Results ................................................................................................................ 6 2.1 Measurement Uncertainty............................................................................................................... 6 2.2 Modification Record........................................................................................................................ 6 3 General Information ......................................................................................................................... 7 3.1 General Description of EUT ............................................................................................................ 7 3.2 Description of Test Modes .............................................................................................................. 8 3.2.1 Test Mode Applicability and Tested Channel Detail .......................................................................... 9 3.3 Description of Support Units ..........................................................................................................11 3.3.1 Configuration of System under Test ...............................................................................................11 3.4 General Description of Applied Standards ..................................................................................... 12 4 Test Types and Results.................................................................................................................. 13 4.1 Radiated Emission and Bandedge Measurement.......................................................................... 13 4.1.1 Limits of Radiated Emission and Bandedge Measurement ............................................................ 13 4.1.2 Test Instruments ........................................................................................................................... 14 4.1.3 Test Procedures ........................................................................................................................... 15 4.1.4 Deviation from Test Standard ........................................................................................................ 15 4.1.5 Test Set Up................................................................................................................................... 16 4.1.6 EUT Operating Conditions ............................................................................................................ 16 4.1.7 Test Results .................................................................................................................................. 17 4.2 Conducted Emission Measurement .............................................................................................. 23 4.2.1 Limits of Conducted Emission Measurement ................................................................................. 23 4.2.2 Test Instruments ........................................................................................................................... 23 4.2.3 Test Procedures ........................................................................................................................... 24 4.2.4 Deviation From Test Standard ....................................................................................................... 24 4.2.5 Test Setup .................................................................................................................................... 24 4.2.6 EUT Operating Condition .....................…

Text truncated - open the document above for the full version.

FCC ID: P27DLC200SUS Sheet 1 of 91 Sheets ETC Report No.: 15-02-MAS-032 Electronics Testing Center, Taiwan No.8, Lane 29, Wenming Rd. Guishan Dist.Taoyuan City 33383, Taiwan, R.O.C. Rev. No 1.0 CONFORMANCE TEST REPORT FOR FCC Part 15, subpart D Report No.: 15-02-MAS-032 Client: Sercomm Corp. Product: Digital Life Controller Model: DLC-200SUS, DLC-200Sxxx (where “x” is blank, number or any characters) FCC ID: P27DLC200SUS Manufacturer/supplier: Sercomm Corp. Date test item received: 2015/02/09 Date test campaign completed: 2015/03/30 Date of issue: 2015/04/17 The test result only corresponds to the tested sample. It is not permitted to copy this report, in part or in full, without the permission of the test laboratory. Total number of pages of this test report: 91 pages Total number of pages of photos: External photos 2 pages Internal photos 8 pages Setup photos 4 pages Test Engineer Checked By Approved By John Li Falcon Shi James Cheng FCC ID: P27DLC200SUS Sheet 2 of 91 Sheets ETC Report No.: 15-02-MAS-032 Electronics Testing Center, Taiwan No.8, Lane 29, Wenming Rd. Guishan Dist.Taoyuan City 33383, Taiwan, R.O.C. Rev. No 1.0 Table of Contents Page 1 GENERAL INFORMATION......................................................................................................... 4 1.1 Testing Laboratory..................................................................................................................... 4 1.2 Client Information....................................................................................................................... 4 1.3 Manufacturer...............................................................................................................................4 2 TEST INFORMATION................................................................................................................... 5 2.1 Description of Tested Device(s)...........................................................................…

Text truncated - open the document above for the full version.