P27NA300Z-WAVE BRIDGE

NA300 Z-Wave Bridge User Guide i Table of Contents CHAPTER 1 INTRODUCTION...................................................................................... 1 Package Contents ................................................................................................ 1 Specfication .......................................................................................................... 1 CHAPTER 2 BOARD DESCRIPTION .......................................................................... 2 Components and connectors.............................................................................. 2 CHAPTER 3 FCC STATEMENT ................................................................................... 5 Copyright 2011. All Rights Reserved. Document Version: 1.0 All trademarks and trade names are the properties of their respective owners. 1 Chapter 1 Introduction This Chapter provides an overview of the Z-Wave Bridge's features and capabilities. Congratulations on the purchase of your new Z-Wave Bridge. The Z-Wave Bridge is a consumer electronic device, which is used for home monitoring and security. Package Contents The following items should be included: • The Z-Wave Bridge Unit • Power Adapter • Batteries If any of the above items are damaged or missing, please contact your dealer imme- diately. Specfication • DDR2 SDRAM 64MB • NAND 32MB Flash • One Ethernet port with RJ45 connectors. • Z-Wave Function • One USB 2.0 ports • Add button • Remove button • Reset button • One Internal antennae 1 2 Chapter 2 Board Description This Chapter provides board description for the Z-Wave Bridge. Components and connectors y 1. USB type A connector • 2. LAN port • 3. Push buttons • 4. Console port • 5. LEDs • 6. DC power jack 2 1 2 3 4 5 6 3 Console port connection guide For platform debugging, please locate the console cable accompanied with the devel- opment kit. Then follow the steps illustrated below: Pin definition 1. Connect cable to console port 4 2. Execute minicom on Linux host machine 3. Press Ctrl+A then Z to enter minicom configuration 4. Set Comm port to baud rate 57600, 8 data bits, no parity bits, and one stop bit. 5 Chapter 3 FCC STATEMENT 3 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interfer- ence by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

SerComm Corporation中磊電子股份有限公司 Taipei Office: 8F, No.3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. TEL: 886-2-2655-3988 FAX: 886-2-2655-3966 Chu Nan Office: 3F, No. 81, YuYi Rd., Chu-Nan, Miao-Li 350, Taiwan, R.O.C. TEL: 886-37-585-899 FAX: 886-37-585-000 Date：November 17, 2011 Federal Communications Commission Authorization and Evaluation Division FCC ID : P27NA300 Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: 1. Schematics 2. Operational Description 3. Block diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Your Sincerely, Ronnie Cheng Associate Manager / R&D Division SerComm Corporation TEL: 886-2-2655-3988 #2547 FAX: 886-2-2655-7379 E-Mail: [email protected]

SerComm Corporation中磊電子股份有限公司 Taipei Office: 8F, No.3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. TEL: 886-2-2655-3988 FAX: 886-2-2655-3966 Chu Nan Office: 3F, No. 81, YuYi Rd., Chu-Nan, Miao-Li 350, Taiwan, R.O.C. TEL: 886-37-585-899 FAX: 886-37-585-000 Date：November 17, 2011 Subject: DoC declaration To Whom it may concern, We, as the grantee of this project FCC ID: P27NA300 , would like to declare that the composite portion categorized as computer peripheral has been authorized under the Declaration of Conformity procedures. Regards, Your Sincerely, Ronnie Cheng Associate Manager / R&D Division SerComm Corporation TEL: 886-2-2655-3988 #2547 FAX: 886-2-2655-7379 E-Mail: [email protected]

SerComm Corporation磊 Taipei Office: 8F, No.3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. TEL: 886-2-2655-3988 FAX: 886-2-2655-3966 Chu Nan Office: 3F, No. 81, YuYi Rd., Chu-Nan, Miao-Li 350, Taiwan, R.O.C. TEL: 886-37-585-899 FAX: 886-37-585-000 DateNovember 10, 2011 Dear Sir, I hereby have entrusted the following person to be a proxy regarding application for Type Certification. Compliance Certification Services Inc. Address: No. No.11, Wu-Gong 6 th Rd., Wugu Industrial Park, New Taipei City 248, Taiwan(R.O.C.) Mr. Jason Lin Job Title: Section Manager Email: [email protected] I am therefore responsible for the contents of the application. Brand Name and Model Name of the specified radio equipment: SerComm ; MiOS Limited / NA300xxxxx (Where x is 0-9A-Z-or blank) ; G100 FCC ID: P27NA300 Product Name: Z-Wave Bridge

Compliance Certification Services Inc. Report No.: T111101202 Date of Issue: November 16, 2011 A1 - 1 / 14 APPENDIX 1 - PHOTOGRAPHS OF EUT EXTERNAL PHOTOGRAPHS OF EUT Compliance Certification Services Inc. Report No.: T111101202 Date of Issue: November 16, 2011 A1 - 2 / 14 Compliance Certification Services Inc. Report No.: T111101202 Date of Issue: November 16, 2011 A1 - 3 / 14 Compliance Certification Services Inc. Report No.: T111101202 Date of Issue: November 16, 2011 A1 - 4 For SUNNY / SYS1381-1212-W2 Compliance Certification Services Inc. Report No.: T111101202 Date of Issue: November 16, 2011 A1 - 5 For Leader / MU12-G120100-A1

Compliance Certification Services Inc. Report No.: T111101202 Date of Issue: November 16, 2011 A1 - 6 INTERNAL PHOTOGRAPHS OF EUT Compliance Certification Services Inc. Report No.: T111101202 Date of Issue: November 16, 2011 A1 - 7 Compliance Certification Services Inc. Report No.: T111101202 Date of Issue: November 16, 2011 A1 - 8 Compliance Certification Services Inc. Report No.: T111101202 Date of Issue: November 16, 2011 A1 - 9 Compliance Certification Services Inc. Report No.: T111101202 Date of Issue: November 16, 2011 A1 - 10 Compliance Certification Services Inc. Report No.: T111101202 Date of Issue: November 16, 2011 A1 - 11 Compliance Certification Services Inc. Report No.: T111101202 Date of Issue: November 16, 2011 A1 - 12 Compliance Certification Services Inc. Report No.: T111101202 Date of Issue: November 16, 2011 A1 - 13 Antenna Compliance Certification Services Inc. Report No.: T111101202 Date of Issue: November 16, 2011 A1 - 14

Part No : 61721051WY REV: 0Where use: Maker : WHA YU INDUSTRIAL CO., LTD Maker P/N : C147-510755-A REV: X2 Part Name : ANTENNAVendor : WHA YUPlace/Origin : China Part Description : ANTENNA C147-510755-A,125mm/50ohm/GA WYI Green Related RoHS Contents or Instructions : *ٚ۶᧢ޓႊࠃছᆖ࠰ᓳࠀࢭᎁ৵ࡨױ᧢ޓ.Any change must be negotiated in advance, and execute the revision after SerComm's Approval. Final Approval :ԩ Conditional Approval : Temporary Approval : ԩ Attachments : Final disposition : Ϯ ApprovedREV ϭ Conditional Approved : ϭ Temporary approved : آᆖءֆ׹๺ױΔᣤᆃ਒ߦ. Prohibit from Copying without SerComm's permission. DISTRIBUTION :ϮCHUNANϮ SERNETϮVENDORϮR/D Jason Chen 12/17/2010 David Chiang 12/17/2010 PS Yang 12/17/2010 (mm)/ (dd)/ (yy) ϭ sampleϮ specificationϭ drawingϭ other For purchasing to by pcs, for pilot poduction test. Vendor is requested to supply samples again before Related Document ( ઌᣂ֮ٙ FILE No. ( ᒳᇆ ) Component Mechanical PE Change history ( ᧢ޓಖᙕ ) ϭ electricalϭ dimensionalϭ visualϭ function ϮelectricalϮ dimensionalϮ visualϮ function PM EMI ϭ electricalϭ dimensionalϭ visualϭ functionH/W EE In Charge (Name/Date) Checked By (Name/Date) Disposition Countersign ܍!ᇡ!ਜ Approval Sheet May Hsu 12/17/2010 PAO No : PAO-1004454 Page : 1 of 1 Date : 12 / 17 / 2010 NA300 Detailed specification is shown as attachment. ύድႝηިҽԖज़Ϧљ ЎҹᆅڋύЈวՉക Dec. 17 2010 Item Page 1.1 2.2 3.3~6 4.7~9 5.10~13 5.14~17 6.18~19 ګ঴ቹ .................................... Dpoofdupsޗᢞ'VM ..................... ྒྷᇢ໴ܫ ............... ..................... ..................... Dbcmf๵௑'VM ..................... ᠨ૿ᓄޗᔆᢞࣔ ............... Contents Description ֚ᒵ๵௑। .................................... ............... ............... ..................... QDCޗᢞ'VM ............... Specification (With housing) 1. Electrical Properties : 1.1 Frequency Range.................. 1.2 Impedance ........................ 1.3 VSWR .............................. 1.4 Return Loss........................ 1.5 Radiation ........................... 1.6 Gain(peak).........................2.21dBi (excluding cable loss ) 1.7 Cable Loss........................ 0.5 dB Max. 1.8 Polarization........................Linear ; Vertical 1.9 Admitted Power.................. 1.10 Cable.................................ĭ1.13 Coaxial Cable 1.11 Connector...........................MHF 2. Physical Properties : 2.1 Operating Temp. ..................-10к ~ +60к 2.2 Storage Temp. .....................-10к ~ +70к PCB Antenna Assembly Omni-directional 1W 860~930MHz 50ȍ Nominal 2.1:1 Max. -9 dB Max. 1 2 RF Antenna Assembly P/NO : C147-510755-A(SSR-02278) SPEC:860~930MHz With housing 3 C147-510755-A(SSR-02278) X-Z plane(Phi=0) Y-Z plane(Phi=90) 4 C147-510755-A(SSR-02278) X-Y plane(theta=90) 5

Compliance Certification Services Inc. FCC ID: P27NA300 Report No.: T111101202-RP Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. Page 1 / 26 FCC 47 CFR PART 15 Subpart C TEST REPORT For Z-Wave Bridge Model Number: Trade Name NA300xxxxx (Where x is 0-9，A-Z，-or blank) SerComm G100 MiOS Limited Issued to SerComm Corporation 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. Issued by Compliance Certification Services Inc. No.11, Wu-Gong 6th Rd., Wugu Industrial Park, New Taipei City 248, Taiwan (R.O.C.) http://www.ccsrf.com [email protected] Issued Date: November 16, 2011 Compliance Certification Services Inc. FCC ID: P27NA300 Report No.: T111101202-RP Page 2 Revision History Rev. Issue Date Revisions Effect Page Revised By 00 November 16, 2011 Initial Issue ALL Angel Cheng Compliance Certification Services Inc. FCC ID: P27NA300 Report No.: T111101202-RP Page 3 TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION................................................................................................................ 4 2. EUT DESCRIPTION...................................................................................................................................... 5 3. TEST METHODOLOGY ............................................................................................................................... 6 3.1 EUT CONFIGURATION................................................................................................................. 6 3.2 EUT EXERCISE............................................................................................................................. 6 3.3 GENERAL TEST PROCEDURES...................................................................................................... 6 3.4 FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS.................................................. 7 3.5 DESCRIPTION OF TEST MODES.................................................................................................... 7 4. INSTRUMENT CALIBRATION................................................................................................................... 8 4.1 MEASURING INSTRUMENT CALIBRATION............................................................................... 8 4.2 MEASUREMENT EQUIPMENT USED .................................................................................. 8 4.3 MEASUREMENT UNCERTAINTY ........................................................................................ 9 5. FACILITIES AND ACCREDITATIONS .................................................................................................... 10 5.1 FACILITIES ................................................................................................................................ 10 5.2 EQUIPMENT...............................................................................................................................10 5.3 TABLE OF ACCREDITATIONS AND LISTINGS.............................................................................. 11 6. SETUP OF EQUIPMENT UNDER TEST ...................................................................................................12 6.1 SETUP CONFIGURATION OF EUT................................................................................................ 12 6.2 SUPPORT EQUIPMENT ........................................................................................................ 12 7. FCC PART 15.249 REQUIREMENTS ........................................................................................................ 13 7.1 20 DB BANDWIDTH.............................................................................................................. 13 7.2 SPURIOUS EMISSION .......................................................................................................... 15 7.3 POWERLINE CONDUCTED EMISSIONS ........................................................................... 21 APPENDIX I PHOTOGRAPHS OF TEST SETUP ............................................................................................24 APPENDIX 1 - PHOTOGRAPHS OF EUT Compliance Certification Services Inc. FCC ID: P27NA300 Report No.: T111101202-RP Page 4 1. TEST RESULT CERTIFICATION Applicant: SerComm Corporation 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. Equipment Under Test: Z-Wave Bridge Tr a d e N a m e : SerComm, MiOS Limited Model Number: NA300xxxxx (Where x is 0-9，A-Z，-or blank), G100 Date of Test: November 7 ~ 10, 2011 APPLICABLE STANDARDS STANDARD TEST RESULT FCC 47 CFR Part 15 Subpart C No non-compliance noted We hereby certify that: The above equipment was tested by Compliance Certification Services Inc. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4: 2003 and the energy emitted by the sample EUT tested as described in this report is in compliance with the requirements emission limits of FCC Rules Part 15.107, 15.109,15.207, 15.209 and 15.249. The test results of this report relate only to the tested sample identified in this report. Approved by: Reviewed by: Jason Lin Gina Lo Section Manager Section Manager Compliance Certification Services Inc. Compliance Certification Services Inc. Compliance Certification Services Inc. FCC ID: P27NA300 Report No.: T111101202-RP Page 5 2. EUT DESCRIPTION Product Z-Wave Bridge Trade Name SerComm, MiOS Limited Model Number NA300xxxxx (Where x is 0-9，A-Z，-or blank), G100 Model Discrepancy All the specification and layout are identical except they come with different model numbers for marketing purposes. Received Date November 1, 2011 Power Supply 1. Power adapter a) Trade Name: Sunny Model Number: SYS13…

Text truncated - open the document above for the full version.

Compliance Certification Services Inc. FCC ID: P27NA300 Report No.: T111101202-RP Page 24 APPENDIX I PHOTOGRAPHS OF TEST SETUP Conducted Emission Set Up Photo Compliance Certification Services Inc. FCC ID: P27NA300 Report No.: T111101202-RP Page 25 Radiated Emission Set up Photos Compliance Certification Services Inc. FCC ID: P27NA300 Report No.: T111101202-RP Page 26 Powerline Conducted Emissions Setup Photos