P27OC1101Industrial LTE CPE

Industrial LTE CPE User Manual July 2, 2020 V1.3.6 Before Use Steps: 1.Remove bottom cover 2.Insert Micro SIM card into card socket(yellow frame) 3.Connect power cable and LAN cable * Please wear anti-static gloves and always remove/insert micro SIM card when the device is power off. 1 RP131CBRS-P User Manual v1.3 Power 12~24V LAN Configure Laptop/PC Ethernet to Fixed IP To connect to video bridge, please use fixed IP all the time no matter in configuration or assigned IP check period. Steps: 1. Configure Laptop IP to 10.10.2.10/255.255.255.0 (Don’t use DHCP to get IP from CPE) 2. Click “OK” RP131CBRS-P User Manual v1.3 2 How to Login GUI 1. Visit https://10.10.2.254 2. User ID/PW: admin/admin 3 RP131CBRS-P User Manual v1.3 Steps: 1.Visit https://10.10.2.254 2.User ID/PW: admin/admin 3.Click “Sing In” How to Get LTE information Steps: 1.Visit https://10.10.2.254 2.Click “Status” on the left menu RP131CBRS-P User Manual v1.3 1. Visit https://10.10.2.254 2. Click ”Status” LTE information Sercomm FW version 4 How to configure APN Name-NAT 1. Visit https://10.10.2.254 3. Configure APN name 2. Click ”Setting” 5. Click ”Restart” to reboot device 4. Click “Save” 5 RP131CBRS-P User Manual v1.3 Steps: 1.Visit https://10.10.2.254 2.Click “Setting” on the left menu 3.Configure APN Name if required 4.Click ”Save” 5.Click “Restart “ or unplug to reboot the device How to configure APN Name-Bridge 1. Visit https://10.10.2.254 3. Configure APN name Steps: 1.Visit https://10.10.2.254 2.Click “Setting” on the left menu 3.Tick the checkbox of Bridge and configure APN Name if required 4.Click ”Save” 5.Click “Restart “ or unplug to reboot the device 6.Configure laptop/PC ethernet to DHCP to get IP in bridge mode. 7.Configure laptop/PC ethernet to fixed IP when need to enter GUI in bridge mode. 2. Click ”Setting” 5. Click ”Restart” to reboot device 4. Click “Save” 6 RP131CBRS-P User Manual v1.3 7 How to Upgrade Firmware 1. Visit https://10.10.2.254 2. Click 3. Click to choose firmware file 4. Click “Upload” Steps: 1.Visit https://10.10.2.254 2.Click “Administration” on the left menu 3.Click “Choose File” to choose firmware file 4.Click ”Upload” RP131CBRS-P User Manual v1.3 8 How to Reset to Default 1. Visit https://10.10.2.254 2. Click 4. Click “Factory Defaults” Steps: 1.Visit https://10.10.2.254 2.Click “Administration” on the left menu 3.Click “Config File” 4.Click “Factory Defaults” to reset to default settings 5.Click “Restart “ or unplug to reboot the device 3. Click “Config File” 5. Click ”Restart” to reboot device RP131CBRS-P User Manual v1.3 9 How to Read LEDs STATUS STATUS LED LTE SIGNAL LED Green Red Blue Green Orange Power On On Off Off Off Off Power Off Off Off Off Off Off No SIM card Off On Off Off Off FW Upgrading Blink Off Off Off Off FW Upgrading Fail On Blink Off Off Off PLMN Search / Network Attaching On Off Off Blink Off RSRP (> -87) dBm On Off On Off Off RSRP ( -106 ~ -87) dBm On Off Off On Off RSRP (< -106) dBm On Off Off Off On RP131CBRS-P User Manual v1.3 10 How to Mount the Device_Pole Mount RP131CBRS-P User Manual v1.3 11 RP131CBRS-P User Manual v1.3 How to Mount the Device_Wall Mount 12 RP131CBRS-P User Manual v1.3 Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

SercommCorporation中磊電子股份有限公司 TaipeiOffice:8F,No.3-1,YuanQuSt.,NanKang,Taipei115,Taiwan,R.O.C. TEL:886-2-2655-3988FAX:886-2-2655-3966 Date:2020-05-20 FCCID:P27OC1101 Totheattentionof FederalCommunicationsCommission AuthorizationandEvaluationDivision ConfidentialityRequest PursuanttoSections0.457and0.459oftheCommission’sRules,theApplicantherebyrequests confidentialtreatmentofinformationaccompanyingthisApplicationasoutlinedbelow: Schematics BlockDiagram OperationalDescription Partlist Tune-upProcedure Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarilyreleasedto thepublic.ThepublicdisclosureofthesemattersmightbeharmfultotheApplicantandprovide unjustifiedbenefitstoitscompetitors. TheApplicantunderstandsthatpursuanttoRule0.457,disclosureofthisApplicationandall accompanyingdocumentationwillnotbemadebeforethedateoftheGrantforthisapplication. Sincerelyyours, ----------------------------------------------- SercommCorporation NickWu/Engineer TEL:886-2-2655-3988*2556 FAX:886-2-2655-3965 E-mail:[email protected]

SercommCorporation中磊電子股份有限公司 TaipeiOffice:8F,No.3-1,YuanQuSt.,NanKang,Taipei115,Taiwan,R.O.C. TEL:886-2-2655-3988FAX:886-2-2655-3966 Date:2020-04-27 FCCID:P27OC1101 AUTHORIZATIONLETTER Towhomitmayconcern: We,theundersigned,herebyauthorizeAndreaHsia/SupervisorofBureauVeritasConsumer ProductsServices(H.K.)Ltd.,TaoyuanBranch(BVCPSTaoyuan)ofTaiwantoactonourbehalfinall mannersrelatingtoFCCapplicationforequipmentauthorization,includingsigningofalldocuments relatingtothesematters.AnyandallactscarriedoutbyAndreaHsia/SupervisorofBVCPSTaoyuan onourbehalfshallhavethesameeffectasactsofourown. Ifyouhaveanyquestionsregardingtheauthorization,pleasedon’thesitatetocontactus. Sincerelyyours, ----------------------------------------------- SercommCorporation NickWu/Engineer TEL:886-2-2655-3988*2556 FAX:886-2-2655-3965 E-mail:[email protected]

Reference No.:191108D01_ExtPho Page 1/4 CONSTRUCTION PHOTOS OF EUT Reference No.:191108D01_ExtPho Page 2/4 Reference No.:191108D01_ExtPho Page 3/4 Reference No.:191108D01_ExtPho Page 4/4 Antenna

Industrial LTE CPE– Product Label 1 Industrial LTE CPE–Label Location 2 Product Label

Reference No.:191108D01_IntPho Page 1/6 CONSTRUCTION PHOTOS OF EUT Reference No.:191108D01_IntPho Page 2/6 Reference No.:191108D01_IntPho Page 3/6 Reference No.:191108D01_IntPho Page 4/6 Reference No.:191108D01_IntPho Page 5/6 Reference No.:191108D01_IntPho Page 6/6

Report No.: SA191108D01 Page No. 1 / 5 Report Format Version: 6.1.1 RF Exposure Report Report No.: SA191108D01 FCC ID: P27OC1101 Test Model: OC1101 Received Date: Nov. 8, 2019 Test Date: Feb. 20 to May 29, 2020 Issued Date: Jun. 1, 2020 Applicant: Sercomm Corp. Address: 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. (NanKang Software Park) Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan FCC Registration / Designation Number: 198487 / TW2021 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: SA191108D01 Page No. 2 / 5 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits For Maximum Permissible Exposure (MPE) ............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 2.4 Calculation Result of Maximum Conducted Power ............................................................................. 5 Report No.: SA191108D01 Page No. 3 / 5 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued SA191108D01 Original release. Jun. 1, 2020 Report No.: SA191108D01 Page No. 4 / 5 Report Format Version: 6.1.1 1 Certificate of Conformity Product: Industrial LTE CPE Brand: Sercomm Test Model: OC1101 Sample Status: Engineering sample Applicant: Sercomm Corp. Test Date: Feb. 20 to May 29, 2020 Standards: FCC Part 2 (Section 2.1091) IEEE C95.1-1992 References Test Guidance: KDB 447498 D01 General RF Exposure Guidance v06 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: Jun. 1, 2020 Celia Chen / Supervisor Approved by : , Date: Jun. 1, 2020 Rex Lai / Associate Technical Manager Report No.: SA191108D01 Page No. 5 / 5 Report Format Version: 6.1.1 2 RF Exposure 2.1 Limits For Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f 2 )* 30 30-300 27.5 0.073 0.2 30 300-1500 ... ... f/1500 30 1500-100,000 ... ... 1.0 30 f = Frequency in MHz ; *Plane-wave equivalent power density 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 2.4 Calculation Result of Maximum Conducted Power Frequency Band (MHz) EIRP (dBm) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) CBRS band: 3552.5 ~ 3697.5 23.46 20 0.0441 1 Note: Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. --- END ---

Report No.: RF191108D01-1 Page No. 1 / 13 Report Format Version: 6.1.1 CBSD-EUD Test Report Report No.: RF191108D01-1 FCC ID: P27OC1101 Test Model: OC1101 Received Date: Nov. 08, 2019 Test Date: Apr. 17, 2020 Issued Date: Apr. 21, 2020 Applicant: Sercomm Corp. Address: 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. (NanKang Software Park) Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan FCC Registration/ Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF191108D01-1 Page No. 2 / 13 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT ................................................................................................................ 6 4 Measurement ......................................................................................................................................... 7 4.1 End User Device additional requirements ........................................................................................... 7 4.2 Test Procedure .................................................................................................................................... 7 4.3 Test Environment ................................................................................................................................ 8 4.4 Test Equipment ................................................................................................................................... 8 4.5 Test Setup ........................................................................................................................................... 8 5 Test Result ............................................................................................................................................. 9 6 Pictures of Test Arrangements .......................................................................................................... 12 Appendix – Information of the Testing Laboratories ................................................................................. 13 Report No.: RF191108D01-1 Page No. 3 / 13 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued RF191108D01-1 Original release Apr. 21, 2020 Report No.: RF191108D01-1 Page No. 4 / 13 Report Format Version: 6.1.1 1 Certificate of Conformity Product: Industrial LTE CPE Brand: Sercomm Test Model: OC1101 Sample Status: Engineering sample Applicant: Sercomm Corp. Test Date: Apr. 17, 2020 Standards: FCC Part 96.47 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date:Apr. 21, 2020 Pettie Chen / Senior Specialist Approved by : , Date:Apr. 21, 2020 Bruce Chen / Senior Project Engineer Report No.: RF191108D01-1 Page No. 5 / 13 Report Format Version: 6.1.1 2 Summary of Test Results Applied Standard : FCC Part 96.47 FCC Clause Test Item Result Remarks 96.47(a)(1) End User Device additional requirements Pass Meet the requirement Note: Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. 2.1 Modification Record There were no modifications required for compliance. Report No.: RF191108D01-1 Page No. 6 / 13 Report Format Version: 6.1.1 3 General Information 3.1 General Descriptio…

Text truncated - open the document above for the full version.

Report No.: RF191108D01 Page No. 1 / 69 Report Format Version: 6.1.1 FCC Test Report (Part 96) Report No.: RF191108D01 FCC ID: P27OC1101 Test Model: OC1101 Received Date: Nov. 8, 2019 Test Date: Feb. 20 to May 29, 2020 Issued Date: Jun. 1, 2020 Applicant: Sercomm Corp. Address: 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. (NanKang Software Park) Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan FCC Registration / Designation Number: 198487 / TW2021 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF191108D01 Page No. 2 / 69 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 9 3.3 Description of Support Units ............................................................................................................. 10 3.3.1 Configuration of System under Test .................................................................................................. 10 3.4 General Description of Applied Standards and References ............................................................... 11 4 Test Types and Results ...................................................................................................................... 12 4.1 Maximum EIRP Measurement .......................................................................................................... 12 4.1.1 Limits of Maximum EIRP Measurement ............................................................................................ 12 4.1.2 Test Setup .......................................................................................................................................... 12 4.1.3 Test Instruments ................................................................................................................................ 13 4.1.4 Test Procedures ................................................................................................................................. 14 4.1.5 Deviation from Test Standard ............................................................................................................ 14 4.1.6 EUT Operating Conditions ................................................................................................................. 14 4.1.7 Test Results ....................................................................................................................................... 15 4.2 Modulation Characteristics Measurement ......................................................................................... 25 4.2.1 Limits of Modulation Characteristics .................................................................................................. 25 4.2.2 Test Procedure .................................................................................................................................. 25 4.2.3 Test Setup .......................................................................................................................................... 25 4.2.4 Test Results ....................................................................................................................................... 26 4.3 Frequency Stability Measurement ...............................…

Text truncated - open the document above for the full version.

Reference No.: 191108D01-1 Page No. 1 / 1 PHOTOGRAPHS OF THE TEST CONFIGURATION CBSD-EUD Test

Reference No.: RF191108D01 Page No. 1 / 2 PHOTOGRAPHS OF THE TEST CONFIGURATION RADIATED EMISSION TEST <Frequency Range below 1GHz> Reference No.: RF191108D01 Page No. 2 / 2 RADIATED EMISSION TEST <Frequency Range above 1GHz>