P27OC830HD IP Camera

Date：July 3, 2015 BABT TCB Confidentiality Request FCC ID: P27OC830 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, Sercomm Corporation hereby requests permanent confidential treatment of information accompanying this application as outlined below: Common exhibits for which confidentiality is requested are: Schematics Block Diagrams Theory of Operation The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Your Sincerely, Kevin Kuo Sr. Manager / R&D Division Sercomm Corporation TEL: 886-2-2655-3988#2631 FAX: 886-2-2655-7379 E-Mail: [email protected]

Date：July 3, 2015 Subject:DoC declaration To Whom it may concern, We, as the grantee of this project FCC ID: P27OC830, would like to declare that the composite Portion categorized as computer peripheral has been authorized under the Declaration of Conformity procedures. Brand Name & Model Name of the specified radio equipment: Sercomm / OC830xxxxxxxx (the 1st x should be "blank" or "-"; the rest x could be 0 to 9, A to Z, "blank" or “-“ , for marking purpose) FCC ID: P27OC830 Product Name: HD IP Camera Regards, Your Sincerely, Kevin Kuo Sr. Manager / R&D Division Sercomm Corporation TEL: 886-2-2655-3988#2631 FAX: 886-2-2655-7379 E-Mail: [email protected]

Compliance Certification Services Inc. Report No.: T150508D06 A1 - 1 / 10 Rev. 00 APPENDIX 1 - PHOTOGRAPHS OF EUT EXTERNAL PHOTOGRAPHS OF EUT Compliance Certification Services Inc. Report No.: T150508D06 A1 - 2 / 10 Rev. 00 Compliance Certification Services Inc. Report No.: T150508D06 A1 - 3 / 10 Rev. 00 Compliance Certification Services Inc. Report No.: T150508D06 A1 - 4 / 10 Rev. 00

單位用量x1

Compliance Certification Services Inc. Report No.: T150508D06 A1 - 5 / 10 Rev. 00 INTERNAL PHOTOGRAPHS OF EUT Compliance Certification Services Inc. Report No.: T150508D06 A1 - 6 / 10 Rev. 00 Compliance Certification Services Inc. Report No.: T150508D06 A1 - 7 / 10 Rev. 00 Compliance Certification Services Inc. Report No.: T150508D06 A1 - 8 / 10 Rev. 00 Compliance Certification Services Inc. Report No.: T150508D06 A1 - 9 / 10 Rev. 00 Compliance Certification Services Inc. Report No.: T150508D06 A1 - 10 / 10 Rev. 00 Antenna RF IC

Compliance Certification Services Inc. Report No.: T150508D06 A1 - 5 / 10 Rev. 00 INTERNAL PHOTOGRAPHS OF EUT Compliance Certification Services Inc. Report No.: T150508D06 A1 - 6 / 10 Rev. 00 Compliance Certification Services Inc. Report No.: T150508D06 A1 - 7 / 10 Rev. 00 Compliance Certification Services Inc. Report No.: T150508D06 A1 - 8 / 10 Rev. 00 Compliance Certification Services Inc. Report No.: T150508D06 A1 - 9 / 10 Rev. 00 Compliance Certification Services Inc. Report No.: T150508D06 A1 - 10 / 10 Rev. 00 Antenna RF IC

Compliance Certification Services Inc. Report No.: T150508D06 A1 - 5 / 10 Rev. 00 INTERNAL PHOTOGRAPHS OF EUT Compliance Certification Services Inc. Report No.: T150508D06 A1 - 6 / 10 Rev. 00 Compliance Certification Services Inc. Report No.: T150508D06 A1 - 7 / 10 Rev. 00 Compliance Certification Services Inc. Report No.: T150508D06 A1 - 8 / 10 Rev. 00 Compliance Certification Services Inc. Report No.: T150508D06 A1 - 9 / 10 Rev. 00 Compliance Certification Services Inc. Report No.: T150508D06 A1 - 10 / 10 Rev. 00 Antenna RF IC

Snap-on Diagnostics Tune up procedure The output power setting of EUT is set in the factory and followed the max level in below. There is no tune up procedure except factory default setting: 17 dBm± 2dB Kevin Kuo Sr. Manager / R&D Division Sercomm Corporation TEL: 886-2-2655-3988#2631 FAX: 886-2-2655-7379 E-Mail: [email protected]

Snap-on Diagnostics Tune up procedure The output power setting of EUT is set in the factory and followed the max level in below. There is no tune up procedure except factory default setting: 17 dBm± 2dB Kevin Kuo Sr. Manager / R&D Division Sercomm Corporation TEL: 886-2-2655-3988#2631 FAX: 886-2-2655-7379 E-Mail: [email protected]

Snap-on Diagnostics Tune up procedure The output power setting of EUT is set in the factory and followed the max level in below. There is no tune up procedure except factory default setting: 17 dBm± 2dB Kevin Kuo Sr. Manager / R&D Division Sercomm Corporation TEL: 886-2-2655-3988#2631 FAX: 886-2-2655-7379 E-Mail: [email protected]

Compliance Certification Services Inc. Report No.: T150508D06-MF Page 1 Rev.00 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. KDB 447498 D03 IEEE C95.1 47 C.F.R. Part 1, Subpart I, Section 1.1310 47 C.F.R. Part 2, Subpart J, Section 2.1091 RF EXPOSURE REPORT For HD IP Camera Model: OC830xxxxxxxx (the 1st x should be "blank" or "-"; the rest x could be 0 to 9, A to Z, "blank" or “-“ , for marking purpose) Trade Name: Sercomm Issued to Sercomm Corporation 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. Issued by Compliance Certification Services Inc. No.11, Wugong 6th Rd., Wugu Dist., New Taipei City 24891, Taiwan. (R.O.C.) http://www.ccsrf.com [email protected] Issued Date: June 11, 2015 Compliance Certification Services Inc. Report No.: T150508D06-MF Page 2 Rev.00 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Revision History Rev. Issue Date Revisions Effect Page Revised By 00 2015/06/11 Initial Issue ALL Becca Chen Compliance Certification Services Inc. Report No.: T150508D06-MF Page 3 Rev.00 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. TABLE OF CONTENTS 1. LIMIT .................................................................................................................... 4 2. EUT SPECIFICATION .......................................................................................... 4 3. TEST RESULTS................................................................................................... 5 4. MAXIMUM PERMISSIBLE EXPOSURE .............................................................. 6 Compliance Certification Services Inc. Report No.: T150508D06-MF Page 4 Rev.00 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. 1. LIMIT According to §15.247(i), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission's guidelines. See § 1.1307(b)(1) of this chapter. 2. EUT SPECIFICATION EUT HD IP Camera Model OC830xxxxxxxx (the 1st x should be "blank" or "-"; the rest x could be 0 to 9, A to Z, "blank" or “-“ , for marking purpose) RF Module REALTEK Model: RTL8192EU Model Discrepancy All the above models are identical except for the designation of model numbers. The suffix of "X" (the 1st x should be "blank" or "-"; the rest x could be 0 to 9, A to Z, "blank" or “-“ , for marking purpose) on model number is just for marketing purpose only. Frequency band (Operating) 802.11b/g/n HT20: 2.412GHz ~ 2.462GHz 802.11 n HT40: 2.422GHz ~ 2.452GHz Others Device category Portable (<20cm separation) Mobile (>20cm separation) Others Exposure classification Occupational/Controlled exposure (S = 5mW/cm 2 ) General Population/Uncontrolled exposure (S=1mW/cm 2 ) Antenna Specification PIFA Antenna 2.4GHz: Right Antenna Gain :2.52 dBi (Numeric gain:1.79) wost Lift Antenna Gain :2.16 dBi (Numeric gain:1.64) Maximum Average output power IEEE 802.11b Mode: 18.31 dBm(67.764 mW) IEEE 802.11g Mode:16.34 dBm(43.053 mW) IEEE 802.11n HT 20 Mode: 18.24 dBm(66.681 mW) IEEE 802.11n HT 40 Mode: 18.26 dBm(66.988 mW) Maximum Tune up Power IEEE 802.11b Mode: 19.00 dBm(79.433 mW) IEEE 802.11g Mode:19.00 dBm(79.433 mW) IEEE 802.11n HT 20 Mode: 19.00 dBm(79.433 mW) IEEE 802.11n HT 40 Mode: 19.00 dBm(79.433 mW) Evaluation applied MPE Evaluation* SAR Evaluation N/A Compliance Certification Services Inc. Report No.: T150508D06-MF Page 5 Rev.00 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. 3. TEST RESULTS No non-compliance noted. Calculation Given d GP E   30 & 377 2 E S Where E = Field strength in Volts / meter P = Power in Watts G = Numeric antenna gain d = Distance in meters S = Power density in milliwatts / square centimeter Combining equations and re-arranging the terms to express the distance as a function of the remaining variables yields: 2 377 30 d GP S   Changing to units of mW and cm, using: P (mW) = P (W) / 1000 and d (cm) = d(m) / 100 Yields   22 0796.0 100/377 1000/30 d GP d GP S      Equation 1 Where d = Distance in cm P = Power in mW G = Numeric antenna gain S = Power density in mW / cm 2 Compliance Certification Services Inc. Report No.: T150508D06-MF Page 6 Rev.00 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. 4. MAXIMUM PERMISSIBLE EXPOSURE Substituting the MPE safe distance using d = 20 cm into Equation 1: GPS000199.0 Where P = Power in mW G = Numeric antenna gain S = Power density in mW / cm 2 IEEE 802.11b mode: Ch.Frq.(MHz)P (mW)Gain (num.)D (cm) Power density in mW / cm 2 Limit (mW/cm2) 6243779.4331.79200.02831 IEEE 802.11g mode: Ch.Frq.(MHz)P (mW)Gain (num.)D (cm) Power density in mW / cm 2 Limit (mW/cm2) 11246279.4331.79200.02831 IEEE 802.11n HT20 mode: Ch.Frq.(MHz)P (mW)Gain (num.)D (cm) Power density in mW / cm 2 Limit (mW/cm2) 6243779.4331.79200.02831 IEEE 802.11n HT40 mode: Ch.Frq.(MHz)P (mW)Gain (num.)D (cm) Power density in mW / cm 2 Limit (mW/cm2) 9245279.4331.79200.02831

Compliance Certification Services Inc. Report No.: T150508D06-MF Page 1 Rev.00 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. KDB 447498 D03 IEEE C95.1 47 C.F.R. Part 1, Subpart I, Section 1.1310 47 C.F.R. Part 2, Subpart J, Section 2.1091 RF EXPOSURE REPORT For HD IP Camera Model: OC830xxxxxxxx (the 1st x should be "blank" or "-"; the rest x could be 0 to 9, A to Z, "blank" or “-“ , for marking purpose) Trade Name: Sercomm Issued to Sercomm Corporation 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. Issued by Compliance Certification Services Inc. No.11, Wugong 6th Rd., Wugu Dist., New Taipei City 24891, Taiwan. (R.O.C.) http://www.ccsrf.com [email protected] Issued Date: June 11, 2015 Compliance Certification Services Inc. Report No.: T150508D06-MF Page 2 Rev.00 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Revision History Rev. Issue Date Revisions Effect Page Revised By 00 2015/06/11 Initial Issue ALL Becca Chen Compliance Certification Services Inc. Report No.: T150508D06-MF Page 3 Rev.00 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. TABLE OF CONTENTS 1. LIMIT .................................................................................................................... 4 2. EUT SPECIFICATION .......................................................................................... 4 3. TEST RESULTS................................................................................................... 5 4. MAXIMUM PERMISSIBLE EXPOSURE .............................................................. 6 Compliance Certification Services Inc. Report No.: T150508D06-MF Page 4 Rev.00 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. 1. LIMIT According to §15.247(i), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission's guidelines. See § 1.1307(b)(1) of this chapter. 2. EUT SPECIFICATION EUT HD IP Camera Model OC830xxxxxxxx (the 1st x should be "blank" or "-"; the rest x could be 0 to 9, A to Z, "blank" or “-“ , for marking purpose) RF Module REALTEK Model: RTL8192EU Model Discrepancy All the above models are identical except for the designation of model numbers. The suffix of "X" (the 1st x should be "blank" or "-"; the rest x could be 0 to 9, A to Z, "blank" or “-“ , for marking purpose) on model number is just for marketing purpose only. Frequency band (Operating) 802.11b/g/n HT20: 2.412GHz ~ 2.462GHz 802.11 n HT40: 2.422GHz ~ 2.452GHz Others Device category Portable (<20cm separation) Mobile (>20cm separation) Others Exposure classification Occupational/Controlled exposure (S = 5mW/cm 2 ) General Population/Uncontrolled exposure (S=1mW/cm 2 ) Antenna Specification PIFA Antenna 2.4GHz: Right Antenna Gain :2.52 dBi (Numeric gain:1.79) wost Lift Antenna Gain :2.16 dBi (Numeric gain:1.64) Maximum Average output power IEEE 802.11b Mode: 18.31 dBm(67.764 mW) IEEE 802.11g Mode:16.34 dBm(43.053 mW) IEEE 802.11n HT 20 Mode: 18.24 dBm(66.681 mW) IEEE 802.11n HT 40 Mode: 18.26 dBm(66.988 mW) Maximum Tune up Power IEEE 802.11b Mode: 19.00 dBm(79.433 mW) IEEE 802.11g Mode:19.00 dBm(79.433 mW) IEEE 802.11n HT 20 Mode: 19.00 dBm(79.433 mW) IEEE 802.11n HT 40 Mode: 19.00 dBm(79.433 mW) Evaluation applied MPE Evaluation* SAR Evaluation N/A Compliance Certification Services Inc. Report No.: T150508D06-MF Page 5 Rev.00 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. 3. TEST RESULTS No non-compliance noted. Calculation Given d GP E   30 & 377 2 E S Where E = Field strength in Volts / meter P = Power in Watts G = Numeric antenna gain d = Distance in meters S = Power density in milliwatts / square centimeter Combining equations and re-arranging the terms to express the distance as a function of the remaining variables yields: 2 377 30 d GP S   Changing to units of mW and cm, using: P (mW) = P (W) / 1000 and d (cm) = d(m) / 100 Yields   22 0796.0 100/377 1000/30 d GP d GP S      Equation 1 Where d = Distance in cm P = Power in mW G = Numeric antenna gain S = Power density in mW / cm 2 Compliance Certification Services Inc. Report No.: T150508D06-MF Page 6 Rev.00 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. 4. MAXIMUM PERMISSIBLE EXPOSURE Substituting the MPE safe distance using d = 20 cm into Equation 1: GPS000199.0 Where P = Power in mW G = Numeric antenna gain S = Power density in mW / cm 2 IEEE 802.11b mode: Ch.Frq.(MHz)P (mW)Gain (num.)D (cm) Power density in mW / cm 2 Limit (mW/cm2) 6243779.4331.79200.02831 IEEE 802.11g mode: Ch.Frq.(MHz)P (mW)Gain (num.)D (cm) Power density in mW / cm 2 Limit (mW/cm2) 11246279.4331.79200.02831 IEEE 802.11n HT20 mode: Ch.Frq.(MHz)P (mW)Gain (num.)D (cm) Power density in mW / cm 2 Limit (mW/cm2) 6243779.4331.79200.02831 IEEE 802.11n HT40 mode: Ch.Frq.(MHz)P (mW)Gain (num.)D (cm) Power density in mW / cm 2 Limit (mW/cm2) 9245279.4331.79200.02831

Compliance Certification Services Inc. Report No.: T150508D06-MF Page 1 Rev.00 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. KDB 447498 D03 IEEE C95.1 47 C.F.R. Part 1, Subpart I, Section 1.1310 47 C.F.R. Part 2, Subpart J, Section 2.1091 RF EXPOSURE REPORT For HD IP Camera Model: OC830xxxxxxxx (the 1st x should be "blank" or "-"; the rest x could be 0 to 9, A to Z, "blank" or “-“ , for marking purpose) Trade Name: Sercomm Issued to Sercomm Corporation 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. Issued by Compliance Certification Services Inc. No.11, Wugong 6th Rd., Wugu Dist., New Taipei City 24891, Taiwan. (R.O.C.) http://www.ccsrf.com [email protected] Issued Date: June 11, 2015 Compliance Certification Services Inc. Report No.: T150508D06-MF Page 2 Rev.00 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Revision History Rev. Issue Date Revisions Effect Page Revised By 00 2015/06/11 Initial Issue ALL Becca Chen Compliance Certification Services Inc. Report No.: T150508D06-MF Page 3 Rev.00 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. TABLE OF CONTENTS 1. LIMIT .................................................................................................................... 4 2. EUT SPECIFICATION .......................................................................................... 4 3. TEST RESULTS................................................................................................... 5 4. MAXIMUM PERMISSIBLE EXPOSURE .............................................................. 6 Compliance Certification Services Inc. Report No.: T150508D06-MF Page 4 Rev.00 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. 1. LIMIT According to §15.247(i), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission's guidelines. See § 1.1307(b)(1) of this chapter. 2. EUT SPECIFICATION EUT HD IP Camera Model OC830xxxxxxxx (the 1st x should be "blank" or "-"; the rest x could be 0 to 9, A to Z, "blank" or “-“ , for marking purpose) RF Module REALTEK Model: RTL8192EU Model Discrepancy All the above models are identical except for the designation of model numbers. The suffix of "X" (the 1st x should be "blank" or "-"; the rest x could be 0 to 9, A to Z, "blank" or “-“ , for marking purpose) on model number is just for marketing purpose only. Frequency band (Operating) 802.11b/g/n HT20: 2.412GHz ~ 2.462GHz 802.11 n HT40: 2.422GHz ~ 2.452GHz Others Device category Portable (<20cm separation) Mobile (>20cm separation) Others Exposure classification Occupational/Controlled exposure (S = 5mW/cm 2 ) General Population/Uncontrolled exposure (S=1mW/cm 2 ) Antenna Specification PIFA Antenna 2.4GHz: Right Antenna Gain :2.52 dBi (Numeric gain:1.79) wost Lift Antenna Gain :2.16 dBi (Numeric gain:1.64) Maximum Average output power IEEE 802.11b Mode: 18.31 dBm(67.764 mW) IEEE 802.11g Mode:16.34 dBm(43.053 mW) IEEE 802.11n HT 20 Mode: 18.24 dBm(66.681 mW) IEEE 802.11n HT 40 Mode: 18.26 dBm(66.988 mW) Maximum Tune up Power IEEE 802.11b Mode: 19.00 dBm(79.433 mW) IEEE 802.11g Mode:19.00 dBm(79.433 mW) IEEE 802.11n HT 20 Mode: 19.00 dBm(79.433 mW) IEEE 802.11n HT 40 Mode: 19.00 dBm(79.433 mW) Evaluation applied MPE Evaluation* SAR Evaluation N/A Compliance Certification Services Inc. Report No.: T150508D06-MF Page 5 Rev.00 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. 3. TEST RESULTS No non-compliance noted. Calculation Given d GP E   30 & 377 2 E S Where E = Field strength in Volts / meter P = Power in Watts G = Numeric antenna gain d = Distance in meters S = Power density in milliwatts / square centimeter Combining equations and re-arranging the terms to express the distance as a function of the remaining variables yields: 2 377 30 d GP S   Changing to units of mW and cm, using: P (mW) = P (W) / 1000 and d (cm) = d(m) / 100 Yields   22 0796.0 100/377 1000/30 d GP d GP S      Equation 1 Where d = Distance in cm P = Power in mW G = Numeric antenna gain S = Power density in mW / cm 2 Compliance Certification Services Inc. Report No.: T150508D06-MF Page 6 Rev.00 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. 4. MAXIMUM PERMISSIBLE EXPOSURE Substituting the MPE safe distance using d = 20 cm into Equation 1: GPS000199.0 Where P = Power in mW G = Numeric antenna gain S = Power density in mW / cm 2 IEEE 802.11b mode: Ch.Frq.(MHz)P (mW)Gain (num.)D (cm) Power density in mW / cm 2 Limit (mW/cm2) 6243779.4331.79200.02831 IEEE 802.11g mode: Ch.Frq.(MHz)P (mW)Gain (num.)D (cm) Power density in mW / cm 2 Limit (mW/cm2) 11246279.4331.79200.02831 IEEE 802.11n HT20 mode: Ch.Frq.(MHz)P (mW)Gain (num.)D (cm) Power density in mW / cm 2 Limit (mW/cm2) 6243779.4331.79200.02831 IEEE 802.11n HT40 mode: Ch.Frq.(MHz)P (mW)Gain (num.)D (cm) Power density in mW / cm 2 Limit (mW/cm2) 9245279.4331.79200.02831

Compliance Certification Services Inc. FCC : P27OC830 Report No.: T150508D06-RP Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. Page 1 / 129 Rev. 00 FCC 47 CFR PART 15 SUBPART C TEST REPORT For HD IP Camera Model: OC830xxxxxxxx (the 1st x should be "blank" or "-"; the rest x could be 0 to 9, A to Z, "blank" or “-“ , for marking purpose) Trade Name: Sercomm Issued to Sercomm Corporation 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. Issued by Compliance Certification Services Inc. No.11, Wugong 6th Rd., Wugu Dist., New Taipei City 24891, Taiwan. (R.O.C.) http://www.ccsrf.com [email protected] Issued Date: June 5, 2015 Compliance Certification Services Inc. FCC : P27OC830 Report No.: T150508D06-RP Page 2 Rev. 00 Revision History Rev. Issue Date Revisions Effect Page Revised By 00 June 5, 2015 Initial Issue ALL Becca Chen Compliance Certification Services Inc. FCC : P27OC830 Report No.: T150508D06-RP Page 3 Rev. 00 TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION .................................................................................................... 4 2. EUT DESCRIPTION ........................................................................................................................... 5 3. TEST METHODOLOGY .................................................................................................................... 6 3.1 EUT CONFIGURATION ................................................................................................................. 6 3.2 EUT EXERCISE ............................................................................................................................... 6 3.3 GENERAL TEST PROCEDURES .................................................................................................. 6 3.4 FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS .................................................... 7 3.5 DESCRIPTION OF TEST MODES ................................................................................................. 8 4. INSTRUMENT CALIBRATION ........................................................................................................ 9 4.1 MEASURING INSTRUMENT CALIBRATION ............................................................................ 9 4.2 MEASUREMENT EQUIPMENT USED ......................................................................................... 9 4.3 MEASUREMENT UNCERTAINTY ............................................................................................. 10 5. FACILITIES AND ACCREDITATIONS ........................................................................................ 11 5.1 FACILITIES ................................................................................................................................... 11 5.2 EQUIPMENT ................................................................................................................................. 11 5.3 TABLE OF ACCREDITATIONS AND LISTINGS ...................................................................... 12 6. SETUP OF EQUIPMENT UNDER TEST ....................................................................................... 13 6.1 SETUP CONFIGURATION OF EUT ............................................................................................ 13 6.2 SUPPORT EQUIPMENT ............................................................................................................... 13 7. FCC PART 15.247 REQUIREMENTS ............................................................................................. 14 7.1 6DB BANDWIDTH ....................................................................................................................... 14 7.2 PEAK POWER ............................................................................................................................... 34 7.3 AVERAGE POWER ...................................................................................................................... 36 7.4 BAND EDGES MEASUREMENT ................................................................................................ 38 7.5 PEAK POWER SPECTRAL DENSITY ........................................................................................ 68 7.6 SPURIOUS EMISSIONS ............................................................................................................... 88 7.7 RADIATED EMISSIONS ............................................................................................................ 107 7.8 POWERLINE CONDUCTED EMISSIONS ................................................................................ 124 APPENDIX I PHOTOGRAPHS OF TEST SETUP ............................................................................. 127 APPENDIX 1 - PHOTOGRAPHS OF EUT Compliance Certification Services Inc. FCC : P27OC830 Report No.: T150508D06-RP Page 4 Rev. 00 1. TEST RESULT CERTIFICATION Applicant: Sercomm Corporation 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. Equipment Under Test: HD IP Camera Trade Name: Sercomm Model Number: OC830xxxxxxxx (the 1st x should be "blank" or "-"; the rest x could be 0 to 9, A to Z, "blank" or “-“ , for marking purpose) Date of Test: May 28 ~ June 3, 2015 APPLICABLE STANDARDS STANDARD TEST RESULT FCC 47 CFR Part 15 Subpart C No non-compliance noted We hereby certify that: The above equipment was tested by Compliance Certification Services Inc. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10: 2009 and the energy emitted by the sample EUT tested as described in this report is in compliance with the requirements of FCC Rules Part 15.207, 15.209, 15.247.…

Text truncated - open the document above for the full version.

Compliance Certification Services Inc. FCC : P27OC830 Report No.: T150508D06-RP Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. Page 1 / 129 Rev. 00 FCC 47 CFR PART 15 SUBPART C TEST REPORT For HD IP Camera Model: OC830xxxxxxxx (the 1st x should be "blank" or "-"; the rest x could be 0 to 9, A to Z, "blank" or “-“ , for marking purpose) Trade Name: Sercomm Issued to Sercomm Corporation 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. Issued by Compliance Certification Services Inc. No.11, Wugong 6th Rd., Wugu Dist., New Taipei City 24891, Taiwan. (R.O.C.) http://www.ccsrf.com [email protected] Issued Date: June 5, 2015 Compliance Certification Services Inc. FCC : P27OC830 Report No.: T150508D06-RP Page 2 Rev. 00 Revision History Rev. Issue Date Revisions Effect Page Revised By 00 June 5, 2015 Initial Issue ALL Becca Chen Compliance Certification Services Inc. FCC : P27OC830 Report No.: T150508D06-RP Page 3 Rev. 00 TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION .................................................................................................... 4 2. EUT DESCRIPTION ........................................................................................................................... 5 3. TEST METHODOLOGY .................................................................................................................... 6 3.1 EUT CONFIGURATION ................................................................................................................. 6 3.2 EUT EXERCISE ............................................................................................................................... 6 3.3 GENERAL TEST PROCEDURES .................................................................................................. 6 3.4 FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS .................................................... 7 3.5 DESCRIPTION OF TEST MODES ................................................................................................. 8 4. INSTRUMENT CALIBRATION ........................................................................................................ 9 4.1 MEASURING INSTRUMENT CALIBRATION ............................................................................ 9 4.2 MEASUREMENT EQUIPMENT USED ......................................................................................... 9 4.3 MEASUREMENT UNCERTAINTY ............................................................................................. 10 5. FACILITIES AND ACCREDITATIONS ........................................................................................ 11 5.1 FACILITIES ................................................................................................................................... 11 5.2 EQUIPMENT ................................................................................................................................. 11 5.3 TABLE OF ACCREDITATIONS AND LISTINGS ...................................................................... 12 6. SETUP OF EQUIPMEN…

Text truncated - open the document above for the full version.