P27SCE4103CBVBridgewood 4G Femto cell

Bridgewood Small Cell Model: SCE4103C-BV Quick Installation Guide Manufacture By: Sercomm Corporation 8F, No. 3-1, YuanQu Street, Nankang, Taipei 115, Taiwan, R.O.C. i Table of Contents CHAPTER 1 INTRODUCTION .............................................................................................. 1 Package Contents .............................................................................................................. 1 Key Feature ........................................................................................................................ 1 LEDs ................................................................................................................................... 2 Front & Rear Panel ........................................................................................................... 3 CHAPTER 2 INITIAL INSTALLATION............................................................................... 4 CHAPTER 3 SPECIFICATIONS ............................................................................................ 5 General Specification ........................................................................................................ 5 RF Characteristics ............................................................................................................. 5 Safety Information............................................................................................................. 7 Device Surface Cleaning ................................................................................................... 9 Accessories ....................................................................................................................... 10 1 Chapter 1 Introduction Bridgewood is an indoor, self-configuring small cell device that will be used to public network and LTE coverage at the customer premises. Package Contents Package will include following items: 1 x Bridgewood SCE4103C-BV Device 1 x AC/DC Power Supply Adapter If any of the above items are damaged or missing, please contact your dealer immediately. Key Feature  Designed for indoor/Small Office Retention  LTE Femto Cell Access up to 16 LTE active users  2T2R LTE with OMNI antenna for easy installation  Support 4G FD-LTE Band 66/4, 13 for Femto Cell access  Support Ethernet for LTE Backhaul  1 x LED status display and Info Button  Internal LTE antennas 1 2 LEDs Bridgewood has 1 LED indicators. Table below describes the definition of LED: Installation Mode Boot Booting Up LED - Solid: Green WAN Connecting to Internet LED - Blinking: Green Sync 1PPS Synchronizing LED - Fast Blink: Green Initial VPN Establishing IPSec Tunnel to Initial Security GW LED - Blink: Yellow Initial HeMS Establishing TR069 Connec- tion to Initial HeMS LED - Fast Blinking: Yellow Serving VPN Establishing IPSec Tunnel to Serving Security GW LED - Fast Blink: Blue Serving HeMS Establishing TR069 Connec- tion to Serving HeMS LED - Blinking: Blue MME Establishing S1 connection LED - Blinking: Purple Regular usage mode X2 4G cell ready and establish- ing X2 connection to 5G LED - Solid: Blue In Service NSA mode is enabled LED - Solid: White Error Critical alarm happens LED - Blinking: Red FW Update / Reset 2 Seconds before rebooting LED - Fast Blink: White 3 Front & Rear Panel Front Panel Interface Panel Power Input: 12 Vdc, 2A, Power Jack to Power Adaptor 1PPS External 1PPS signal input connector X2 LAN port input or 5G DUT configuration WAN WAN port for backhaul connect Reset Factory reset button 4 Chapter 2 Initial Installation SCE4103C-BV is designed for Plug-n-Play(PnP) and self-configure which not require any software installation to use. When device power on the device, it will start to connect to back- haul eNB and begin the device Plug PnP and provision processes. The PnP and provision process will take approximate 6~7 min. to bring up and activate the device service. 1. Small cell device provides mobile network SON（Self-Organizing Network）, it is plug& play which can auto configuration to install. 2. Install the Ethernet cable into device WAN port. 3. Another Ethernet cable connector connects to router. 4. Install the Power Adapter DC port into device power jack. 5. When LED steady to flash to green, the device can be used. If the LED indicates different the LED status, please call your agent. 2 5 Chapter 3 Specifications General Specification Connectivity - 3 x Internal Antennas - Ethernet wired connection Power Supply External Power Adapter: Input: AC100～240V, 50Hz/60Hz, 0.7A Max. Output: 12 Vdc, 2A Operating Requirement Operating Temp. 0ºC to 40ºC Storage Temp. -5ºC to 45ºC Operating Humidity 5% to 90% Non-Condensing Storage Humidity 5% to 95% Non-Condensing Reset button Reset & Info Button LED 1 LED for Status. Housing 220mm(W)x 220mm(D)x 63mm(H) RF Characteristics LTE Access RF Transceiver Working LTE frequency Technology Tx Power(B48) Listening bands Bandwidth QCA FTR8930 B66/4, 13 2T2R MIMO, 17dBm Max per chain (Conduced) B66/4, 13 5, 10, 15, 20 Mhz 3 6 Regulatory Requirements FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec- tion against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can b…

Text truncated - open the document above for the full version.

SercommCorporation中磊電子股份有限公司 TaipeiOffice:8F,No.3-1,YuanQuSt.,NanKang,Taipei115,Taiwan,R.O.C. TEL:886-2-2655-3988FAX:886-2-2655-3966 Date:2020-07-01 FCCID:P27SCE4103CBV Totheattentionof FederalCommunicationsCommission AuthorizationandEvaluationDivision ConfidentialityRequest PursuanttoSections0.457and0.459oftheCommission’sRules,theApplicantherebyrequests confidentialtreatmentofinformationaccompanyingthisApplicationasoutlinedbelow: Schematics BlockDiagram OperationalDescription Partlist Tune-upProcedure Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarilyreleasedto thepublic.ThepublicdisclosureofthesemattersmightbeharmfultotheApplicantandprovide unjustifiedbenefitstoitscompetitors. TheApplicantunderstandsthatpursuanttoRule0.457,disclosureofthisApplicationandall accompanyingdocumentationwillnotbemadebeforethedateoftheGrantforthisapplication. Sincerelyyours, ----------------------------------------------- SercommCorporation NickWu/Engineer TEL:886-2-2655-3988*2556 FAX:886-2-2655-3965 E-mail:[email protected]

Sercomm Corporation中磊電子股份有限公司 Taipei Office: 8F, No.3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. TEL: 886-2-2655-3988 FAX: 886-2-2655-3966 Date: 2020-07-14 FCC ID: P27SCE4103CBV To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we request short-term confidential treatment for the following information until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: External photos Test Setup photos User’s manual Internal Photos Sincerely yours, ----------------------------------------------- Sercomm Corporation Nick Wu / Engineer TEL: 886-2-2655-3988*2632 FAX: 886-2-2655-3965 E-mail: [email protected]

SercommCorporation中磊電子股份有限公司 TaipeiOffice:8F,No.3-1,YuanQuSt.,NanKang,Taipei115,Taiwan,R.O.C. TEL:886-2-2655-3988FAX:886-2-2655-3966 Date:2020-07-01 FCCID:P27SCE4103CBV AUTHORIZATIONLETTER Towhomitmayconcern: We,theundersigned,herebyauthorizeAndreaHsia/SupervisorofBureauVeritasConsumer ProductsServices(H.K.)Ltd.,TaoyuanBranch(BVCPSTaoyuan)ofTaiwantoactonourbehalfinall mannersrelatingtoFCCapplicationforequipmentauthorization,includingsigningofalldocuments relatingtothesematters.AnyandallactscarriedoutbyAndreaHsia/SupervisorofBVCPSTaoyuan onourbehalfshallhavethesameeffectasactsofourown. Ifyouhaveanyquestionsregardingtheauthorization,pleasedon’thesitatetocontactus. Sincerelyyours, ----------------------------------------------- SercommCorporation NickWu/Engineer TEL:886-2-2655-3988*2556 FAX:886-2-2655-3965 E-mail:[email protected]

Reference No.:200504D06_ExtPho Page 1/9 CONSTRUCTION PHOTOS OF EUT Reference No.:200504D06_ExtPho Page 2/9 Reference No.:200504D06_ExtPho Page 3/9 Reference No.:200504D06_ExtPho Page 4/9 Reference No.:200504D06_ExtPho Page 5/9 Reference No.:200504D06_ExtPho Page 6/9 Reference No.:200504D06_ExtPho Page 7/9 Reference No.:200504D06_ExtPho Page 8/9 Reference No.:200504D06_ExtPho Page 9/9

FCC ID: P27SCE4103CBV Back Side (remove the Bracket base) FCC Label Location

Notes: 1.材質: 50#白色Mylar,上打字用霧面PET 2.背壓花膠/ 葛拉馨底紙,成捲 3.尺寸/印刷:如圖示 4.方框內尺寸為重點檢驗尺寸 5.公差:+0,- 0.2mm 6.本料件使用之材料須符合RoHS 2020.07.02 Bridgewood 11 藍色線條/字樣為工廠列印辨識使用 無須印刷 紅框為刀模線不印刷 出紙方向, Label間距3mm, 撕紙邊 Label< 正面 > Label< 正面 > Label< 正面 > 3 3 3 10 虛線刀 定位孔 4mm Label 932DGT01GJ Product Label/Verizon 45.0 65.0 黑色 Model: SCE4103C-BV Power Rating: 12V 2A FCC ID: P27SCE4103CBV Made in Taiwan 90.0 30.0 1.82 1.82 4G Femto/Bridegewood 193630000004 UPC-A code: MAC ID: Sercomm P/N: 0DGT0500GJ5 SN: 193630000004 UPC-A code: Model: SCE4103C-BV MAC ID: 35.0 SW Version: 44xxxxxxxx (10 digi) xxxxxxxxxxxx (12 digi) DGTyymmnnnnnn (13 digi) xxxxxxxxxxxx (12 digi) Model: SCE4103C-BV Power Rating: 12V 2A FCC ID: P27SCE4103CBV Made in Taiwan Model: SCE4103C-BV Power Rating: 12V 2AFCC ID: P27SCE4103CBV Made in Taiwan

Reference No.:200504D06_IntPho Page 1/11 CONSTRUCTION PHOTOS OF EUT Reference No.:200504D06_IntPho Page 2/11 Reference No.:200504D06_IntPho Page 3/11 Reference No.:200504D06_IntPho Page 4/11 Reference No.:200504D06_IntPho Page 5/11 Reference No.:200504D06_IntPho Page 6/11 Reference No.:200504D06_IntPho Page 7/11 Reference No.:200504D06_IntPho Page 8/11 Antenna Reference No.:200504D06_IntPho Page 9/11 Reference No.:200504D06_IntPho Page 10/11 Reference No.:200504D06_IntPho Page 11/11

Report No.: SA200504D06 Page No. 1 / 6 Report Format Version: 6.1.1 RF Exposure Report Report No.: SA200504D06 FCC ID: P27SCE4103CBV Test Model: SCE4103C-BV Series Model: SCE4103C-BVxxxxxx (the 2nd x should be "blank" or "-", or A to Z; the first and the rest x could be 0 to 9, A to Z, "blank", or "-" or "/", for marketing purpose) Received Date: May 4, 2020 Test Date: Jun. 2 to Jul. 20, 2020 Issued Date: Jul. 21, 2020 Applicant: Sercomm Corp. Address: 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. (NanKang Software Park) Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan FCC Registration / Designation Number: 198487 / TW2021 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: SA200504D06 Page No. 2 / 6 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits For Maximum Permissible Exposure (MPE) ............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 2.4 Antenna Gain ...................................................................................................................................... 5 2.5 Calculation Result of Maximum Conducted Power ............................................................................. 6 Report No.: SA200504D06 Page No. 3 / 6 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued SA200504D06 Original release. Jul. 21, 2020 Report No.: SA200504D06 Page No. 4 / 6 Report Format Version: 6.1.1 1 Certificate of Conformity Product: Bridgewood 4G Femto cell Brand: Verizon, Sercomm Test Model: SCE4103C-BV Series Model: SCE4103C-BVxxxxxx (the 2nd x should be "blank" or "-", or A to Z; the first and the rest x could be 0 to 9, A to Z, "blank", or "-" or "/", for marketing purpose) Sample Status: Engineering sample Applicant: Sercomm Corp. Test Date: Jun. 2 to Jul. 20, 2020 Standards: FCC Part 2 (Section 2.1091) IEEE C95.3 -2002 References Test Guidance: KDB 447498 D01 General RF Exposure Guidance v06 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: Jul. 21, 2020 Celia Chen / Supervisor Approved by : , Date: Jul. 21, 2020 Rex Lai / Associate Technical Manager Report No.: SA200504D06 Page No. 5 / 6 Report Format Version: 6.1.1 2 RF Exposure 2.1 Limits For Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f 2 )* 30 30-300 27.5 0.073 0.2 30 300-1500 ... ... f/1500 30 1500-100,000 ... ... 1.0 30 f = Frequency in MHz ; *Plane-wave equivalent power density 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 2.4 Antenna Gain Function Frequency Band (MHz) Antenna Type Antenna Connector Antenna Gain (dBi) LTE Band 4 2112.5 ~ 2152.5 PIFA IPEX 4.2 LTE Band 66 2112.5 ~ 2177.5 4.2 LTE Band 13 751 1.2 Note: The above Antenna information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications, the laboratory shall not be held responsible. Report No.: SA200504D06 Page No. 6 / 6 Report Format Versio…

Text truncated - open the document above for the full version.

Report No.: RF200504D06 Page No. 1 / 101 Report Format Version: 6.1.1 FCC Test Report (Part 27: LTE Band 4, 13, 66) Report No.: RF200504D06 FCC ID: P27SCE4103CBV Test Model: SCE4103C-BV Series Model: SCE4103C-BVxxxxxx (the 2nd x should be "blank" or "-", or A to Z; the first and the rest x could be 0 to 9, A to Z, "blank", or "-" or "/", for marketing purpose) Received Date: May 4, 2020 Test Date: Jun. 2 to Jul. 20, 2020 Issued Date: Jul. 21, 2020 Applicant: Sercomm Corp. Address: 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. (NanKang Software Park) Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan FCC Registration / Designation Number: 198487 / TW2021 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: RF200504D06 Page No. 2 / 101 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Test Site and Instruments .................................................................................................................... 7 3 General Information .............................................................................................................................. 8 3.1 General Description of EUT ................................................................................................................ 8 3.2 Configuration of System under Test .................................................................................................. 10 3.2.1 Description of Support Units .............................................................................................................. 10 3.3 Test Mode Applicability and Tested Channel Detail ........................................................................... 11 3.4 EUT Operating Conditions ................................................................................................................ 14 3.5 General Description of Applied Standards and References .............................................................. 14 4 Test Types and Results ...................................................................................................................... 15 4.1 Output Power Measurement ............................................................................................................. 15 4.1.1 Limits of Output Power Measurement ............................................................................................... 15 4.1.2 Test Procedures ................................................................................................................................. 15 4.1.3 Test Setup .......................................................................................................................................... 15 4.1.4 Test Results ....................................................................................................................................... 16 4.2 Modulation characteristics Measurement ......................................................................................... 20 4.2.1 Limits of Modulation characteristics .................................................................................................. 20 4.2.2 Test Procedure .................................................................................................................................. 20 4.2.3 Test Setup .......................................................................................................................................... 20 4.2.4 Test Results ....................................................................................................................................... 21 4.3 Frequency Stability Measurement ..................................................................................................... 24 4.3.1 Limits of Frequency Stabiliity Measurement ...................................................................................... 24 4.3.2 Test Procedure .................................................................................................................................. 24 4.3…

Text truncated - open the document above for the full version.

Reference No.: RF200504D06 Page No. 1 / 2 PHOTOGRAPHS OF THE TEST CONFIGURATION RADIATED EMISSION TEST <Frequency Range below 1GHz> Reference No.: RF200504D06 Page No. 2 / 2 RADIATED EMISSION TEST <Frequency Range above 1GHz>