P27XW3WiFi Adapter

xCAM User’s Guide i Table of Contents CHAPTER 1 INTRODUCTION .............................................................................................. 1 Overview ............................................................................................................................ 1 Physical Details - xCAM ................................................................................................... 2 Physical Details - XW3 ...................................................................................................... 4 Package Contents .............................................................................................................. 5 CHAPTER 2 BASIC SETUP ................................................................................................... 6 System Requirements ........................................................................................................ 6 Installation ......................................................................................................................... 6 Wall Mounting ................................................................................................................... 9 APPENDIX A SPECIFICATIONS ........................................................................................ 11 Spec ................................................................................................................................... 11 Regulatory Approvals ..................................................................................................... 12 Copyright © 2015. All Rights Reserved. Document Version: 1.0 All trademarks and trade names are the properties of their respective owners. 1 Chapter 1 Introduction This Chapter provides information of the xCAM's features, components and capabilities. Overview Congratulations on the purchase of your new xCAM. The xCAM is a True Day/Night IP camera that features high definition 1280 x 720p video resolution and 802.11n WiFi connectivity. Features • Standalone Design. The xCAM is a standalone system with built-in CPU and Video encoder. It requires only a power source and a connection to your touch screen. • Dual Video Compressions. The xCAM supports H.264 and MJEPG video for different image compressions. • Suitable for Home, Business or Public Facilities. Whether for Home, Business or Public Facility surveillance, or just for entertainment and fun, the xCAM has the features you need. • IR LED Support. Each xCAM has two infrared LED. The LEDs can provide illumination around 5 meters long, that can help to output a better video quality while under low-light conditions such as indoors, on cloudy days, or in the morning or evening. Wireless Features • Supports 802.11n Wireless Standard. The 802.11n standard provides backward compatibility with the 802.11b and g standards. The xCAM can work with all 802.11n, 802.11b and 802.11g Wireless stations. • Wired and Wireless Network. The xCAM can be connected either with wire or wirelessly to your network. 1 2 Physical Details - xCAM Front - xCAM Figure 1: Front Panel IR LEDs IR LEDs provide illumination at night or in a dark environment. Lens No physical adjustment is required or possible for the lens, but you should ensure that the lens cover remain clean. The image quality is degraded if the lens cover is dirty or smudged. POWER indicator (Blue/Yellow) On (Blue) - The xCAM is paired. Flashing (Blue) - The xCAM is connected to router but not paired. Flashing (Yellow) - The xCAM is not connected to XW3 or XW3 is not connected to a router. 3 Rear - xCAM Figure 2: Rear Panel RJ-45 Jack This RJ-45 connector is used for power connection when the camera is under wireless mode. A customized PoE (Power over Ethernet) splitter, as a Y-cable, is provided to allow connection to PC for setup and pairing. Reset Button This button has two (2) functions: • Reboot. When pressed and released, the xCAM will reboot (restart). • Clear All Data. This button can also be used to clear ALL data and restore ALL settings to the factory default values. To Clear All Data and restore the factory default values: 1. Power On. 2. Keep holding the Reset Button down for 8 seconds. 3. Release the Reset Button. The xCAM is now using the factory default values. Microphone The built-in microphone is located on the rear of the device. 4 Physical Details - XW3 XW3 LAN Port To be connected to the RJ-45 jack of xCAM for power feed and data exchange. Reset Button This button has the following function: • Reset to manufacturer default valued and reboot. When pressed and held over 10 seconds, the settings of the XW3 will be set to their default values. WPS Button Push the WPS button on the device and on your other wireless device to perform WPS function that easily creates an encryption- secured wireless connection automatically. POWER indicator (Blue/Yellow) On (Blue) - The XW3 is connected to a router. Rapid Flashing (Blue) - WPS association is in process. Slow Flashing (Blue) - The XW3 is not configured or trying to connect to a router. Flashing (Yellow) - The XW3 is not connected to a router. 5 Package Contents The following items should be included in the package: If any of these items are damaged or missing, please contact your dealer immediately. • xCAM Unit (with Stand and Ethernet RJ-45 pigtail) * 1 • Y-cable * 1 • Screw/Anchor x 2 • XW3 Unit * 1 6 Chapter 2 Basic Setup This Chapter provides information on how to install and configure the xCAM. System Requirements • To use the Wireless interface on the wireless model, other Wireless devices must be compliant with the IEEE802.11n, IEEE802.11b or IEEE802.11g specifications. All Wireless stations must use compatible settings. Mode: Infrastructure SSID: ANY Wireless Security: Disabled Domain: USA Channel No.: Auto Installation You must complete the following installation procedure when using the xCAM for the first time. Step 1 - Adding an xCAM to your network Make sure the Router and the To…

Text truncated - open the document above for the full version.

SerComm Corporation中磊電子股份有限公司 Taipei Office: 8F, No.3‐1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. TEL: 886‐2‐2655‐3988 FAX: 886‐2‐2655‐3966 Date: 2015‐09‐18 FCC ID: P27XW3 AUTHORIZATION LETTER To whom it may concern: We, the undersigned, hereby authorize Amanda Wu/ Senior Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Amanda Wu/ Senior Specialist of BV CPS Taoyuan on our behalf shall have the same effect as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ Sercomm Corporation Kevin Kuo/ Sr. Manager TEL: 886‐2‐2655‐3988*2631 FAX: 886‐2‐2655‐3965 E‐mail: [email protected]

SerComm Corporation中磊電子股份有限公司 Taipei Office: 8F, No.3‐1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. TEL: 886‐2‐2655‐3988 FAX: 886‐2‐2655‐3966 Date: 2015‐09‐18 FCC ID: P27XW3 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Software Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ Sercomm Corporation Kevin Kuo/ Sr. Manager TEL: 886‐2‐2655‐3988*2631 FAX: 886‐2‐2655‐3965 E‐mail: [email protected]

Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11

Report No.: SA150903D01 Page No. 1 / 6 Report Format Version: 6.1.1 RF Exposure Report Report No.: SA150903D01 FCC ID: P27XW3 Test Model: XW3 Series Model: XW3xxx (“xxx” could be 0 to 9, A to Z, “blank” , for marking purpose) Received Date: Sep. 3, 2015 Test Date: Sep. 9 ~ 17, 2015 Issued Date: Sep. 18, 2015 Applicant: Sercomm Corp. Address: 8F, No. 3-1, YuangQu St., NanKang, Taipei 115, Taiwan, R.O.C. (NanKang Software Park) Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C.) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: SA150903D01 Page No. 2 / 6 Report Format Version: 6.1.1 Table of Contents Release Control Record ............................................................................................................................. 3 1 Certificate of Conformity ................................................................................................................. 4 2 RF Exposure .................................................................................................................................... 5 2.1 Limits For Maximum Permissible Exposure (MPE) .......................................................................... 5 2.2 MPE Calculation Formula ............................................................................................................... 5 2.3 Classification .................................................................................................................................. 5 3 Calculation Result Of Maximum Conducted Power ....................................................................... 6 Report No.: SA150903D01 Page No. 3 / 6 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued SA150903D01 Original release. Sep. 18, 2015 Report No.: SA150903D01 Page No. 4 / 6 Report Format Version: 6.1.1 1 Certificate of Conformity Product: WiFi Adapter Brand: Sercomm; Xfinity Test Model: XW3 Series Model: XW3xxx (“xxx” could be 0 to 9, A to Z, “blank” , for marking purpose) Sample Status: Engineering sample Applicant: Sercomm Corp. Test Date: Sep. 9 ~ 17, 2015 Standards: FCC Part 2 (Section 2.1091) KDB 447498 D03 IEEE C95.1 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Sep. 18, 2015 Celia Chen / Senior Specialist Approved by : , Date: Sep. 18, 2015 Rex Lai / Assistant Manager Report No.: SA150903D01 Page No. 5 / 6 Report Format Version: 6.1.1 2 RF Exposure 2.1 Limits For Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA150903D01 Page No. 6 / 6 Report Format Version: 6.1.1 3 Calculation Result Of Maximum Conducted Power Frequency Band (MHz) Max Power (dBm) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) 2412-2462 28.39 6.77 20 0.6527 1 5180-5240 22.01 6.61 20 0.1448 1 5745-5825 18.27 6.61 20 0.0612 1 NOTE: 2.4GHz: Directional gain = 3.76dBi + 10log(2) = 6.77dBi 5.0GHz: Directional gain = 3.60dBi + 10log(2) = 6.61dBi Conclusion: The formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ......etc. < 1 CPD = Calculation power density LPD = Limit of power density WLAN 2.4GHz + WLAN 5GHz = 0.6527 + 0.1448 = 0.7975 Therefore the maximum calculations of above situations are less than the “1” limit. --- END ---

Report No.: RF150903D01 Page No. 1 / 54 Report Format Version: 6.1.1 FCC Test Report Report No.: RF150903D01 FCC ID: P27XW3 Test Model: XW3 Series Model: XW3xxx (“xxx” could be 0 to 9, A to Z, “blank” , for marking purpose) Received Date: Sep. 3, 2015 Test Date: Sep. 9 ~ 17, 2015 Issued Date: Sep. 18, 2015 Applicant: Sercomm Corp. Address: 8F, No. 3-1, YuangQu St., NanKang, Taipei 115, Taiwan, R.O.C. (NanKang Software Park) Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C.) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF150903D01 Page No. 2 / 54 Report Format Version: 6.1.1 Table of Contents Release Control Record ............................................................................................................................. 4 1 Certificate of Conformity ................................................................................................................. 5 2 Summary of Test Results ................................................................................................................ 6 2.1 Measurement Uncertainty............................................................................................................... 6 2.2 Modification Record........................................................................................................................ 6 3 General Information ......................................................................................................................... 7 3.1 General Description of EUT ............................................................................................................ 7 3.2 Description of Test Modes .............................................................................................................. 8 3.2.1 Test Mode Applicability and Tested Channel Detail .......................................................................... 9 3.3 Duty Cycle of Test Signal ...............................................................................................................11 3.4 Description of Support Units ......................................................................................................... 12 3.4.1 Configuration of System under Test .............................................................................................. 12 3.5 General Description of Applied Standards ..................................................................................... 13 4 Test Types and Results.................................................................................................................. 14 4.1 Radiated Emission and Bandedge Measurement.......................................................................... 14 4.1.1 Limits of Radiated Emission and Bandedge Measurement ............................................................ 14 4.1.2 Test Instruments ........................................................................................................................... 15 4.1.3 Test Procedures ........................................................................................................................... 16 4.1.4 Deviation from Test Standard ........................................................................................................ 16 4.1.5 Test Set Up................................................................................................................................... 17 4.1.6 EUT Operating Conditions ............................................................................................................ 17 4.1.7 Test Results .................................................................................................................................. 18 4.2 Conducted Emission Measurement .............................................................................................. 31 4.2.1 Limits of Conducted Emission Measurement ................................................................................. 31 4.2.2 Test Instruments ........................................................................................................................... 31 4.2.3 Test Procedures ........................................................................................................................... 32 4.2.4 Deviation from Test Standard ........................................................................................................ 32 4.2.5 Test Setup .........................................................…

Text truncated - open the document above for the full version.

Report No.: RF150903D01-1 Page No. 1 / 58 Report Format Version:6.1.1 FCC Test Report Report No.: RF150903D01-1 FCC ID: P27XW3 Test Model: XW3 Series Model: XW3xxx (“xxx” could be 0 to 9, A to Z, “blank” , for marking purpose) Received Date: Sep. 3, 2015 Test Date: Sep. 14 ~ 17, 2015 Issued Date: Sep. 18, 2015 Applicant: Sercomm Corp. Address: 8F, No. 3-1, YuangQu St., NanKang, Taipei 115, Taiwan, R.O.C. (NanKang Software Park) Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C.) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF150903D01-1 Page No. 2 / 58 Report Format Version:6.1.1 Table of Contents Release Control Record ............................................................................................................................. 4 1 Certificate of Conformity ................................................................................................................. 5 2 Summary of Test Results ................................................................................................................ 6 2.1 Measurement Uncertainty............................................................................................................... 6 2.2 Modification Record........................................................................................................................ 6 3 General Information ......................................................................................................................... 7 3.1 General Description of EUT ............................................................................................................ 7 3.2 Description of Test Modes .............................................................................................................. 8 3.2.1 Test Mode Applicability and Tested Channel Detail .......................................................................... 9 3.3 Duty Cycle of Test Signal ...............................................................................................................11 3.4 Description of Support Units ......................................................................................................... 12 3.4.1 Configuration of System under Test .............................................................................................. 12 3.5 General Description of Applied Standard ...................................................................................... 13 4 Test Types and Results.................................................................................................................. 14 4.1 Radiated Emission and Bandedge Measurement.......................................................................... 14 4.1.1 Limits of Radiated Emission and Bandedge Measurement ............................................................ 14 4.1.2 Test Instruments ........................................................................................................................... 15 4.1.3 Test Procedure ............................................................................................................................. 16 4.1.4 Deviation from Test Standard ........................................................................................................ 16 4.1.5 Test Setup .................................................................................................................................... 17 4.1.6 EUT Operating Condition .............................................................................................................. 17 4.1.7 Test Results .................................................................................................................................. 18 4.2 Conducted Emission Measurement .............................................................................................. 35 4.2.1 Limits of Conducted Emission Measurement ................................................................................. 35 4.2.2 Test Instruments ........................................................................................................................... 35 4.2.3 Test Procedure ............................................................................................................................. 36 4.2.4 Deviation from Test Standard ........................................................................................................ 36 4.2.5 Test Setup ................................................…

Text truncated - open the document above for the full version.

1 of 2 PHOTOGRAPHS OF THE TEST CONFIGURATION Conducted Emission Test 2 of 2 Radiated Emission Test