P36-30181-3/4 (44mm) SDS-MAX Rotary Hammer

RF Exposure Exhibit Manufacturer Name TCGP Manufacturer Address 13135 W Libson Rd Waukesha, WI 53005 Product Name Brand/Model No. 0149 Date Received January 6, 2026 Assessment Dates January 6 & 9, 2026 Specifications FCC "Code of Federal Regulations" Title 47 Part 1, Subpart I FCC 447498 D04 Interim General RF Exposure Guidance v01 RSS-102 Issue 6 Test Facility Elite Electronic Engineering, Inc. 1516 Centre Circle, Downers Grove, IL 60515 Signature Tested by Tylar Jozefczyk RF Exposure Exhibit This report shall not be reproduced, except in full, without the written approval of Elite Electronic Engineering Inc. Page 2 of 10 Table of Contents 1. Report Revision History ........................................................................................................................... 3 2. Introduction .............................................................................................................................................. 4 3. Subject of Investigation ............................................................................................................................ 4 4. Standards and Requirements .................................................................................................................. 4 5. Sample Calculations ................................................................................ Error! Bookmark not defined. 6. Photographs of EUT ................................................................................................................................ 5 7. Limits and Requirements ......................................................................................................................... 6 7.1. Requirements mandated by the FCC ...................................................................................................... 6 7.2. Requirements mandated by Innovation, Science and Economic Development Canada ........................ 8 7.3. Requirements mandated by the European Union and outlined in EN 62311 .........Error! Bookmark not defined. 7.4. Requirements mandated by Australia/New Zealand and outlined in RPS S-1 .......Error! Bookmark not defined. 8. Assessment Results ................................................................................................................................ 9 8.1. RF Exposure Evaluation Pertinent to the Requirements of the FCC of a Single RF Source .................. 9 8.2. RF Exposure Evaluation Pertinent to the Requirements of the FCC of Multiple Standalone Source(s) Error! Bookmark not defined. 8.3. RF Exposure Evaluation Pertinent to the Requirements of the FCC of Multiple RF Source(s) with Simultaneous Transmission .................................................................................. Error! Bookmark not defined. 8.4. RF Exposure Evaluation Relevant to the Requirements of the ISED of a Single RF Source ................. 9 8.5. RF Exposure Evaluation Relevant to the Requirements of the ISED of Multiple Standalone Source(s) Error! Bookmark not defined. 8.6. RF Exposure Evaluation Relevant to the Requirements of the ISED of Multiple Source(s) with Simultaneous Transmission .................................................................................. Error! Bookmark not defined. 8.7. RF Exposure Evaluation Relevant to the Requirements of the EU of a Single RF Source ............. Error! Bookmark not defined. 8.8. RF Exposure Evaluation Relevant to the Requirements of the EU of Multiple Standalone RF Sources Error! Bookmark not defined. 8.9. RF Exposure Evaluation Relevant to the Requirements of the EU of Multiple RF Sources with Simultaneous Transmission .................................................................................. Error! Bookmark not defined. 8.10. RF Exposure Evaluation Relevant to the Requirements of the Australia/New Zealand of a Single RF Source Error! Bookmark not defined. 8.11. RF Exposure Evaluation Relevant to the Requirements of the Australia/New Zealand of Multiple Standalone RF Sources ........................................................................................ Error! Bookmark not defined. 8.12. RF Exposure Evaluation Relevant to the Requirements of the Australia/New Zealand of Multiple RF Sources with Simultaneous Transmission ............................................................ Error! Bookmark not defined. 9. Statement of Compliance ....................................................................................................................... 10 10. Scope of Accreditation ............................................................................. Error! Bookmark not defined. RF Exposure Exhibit Page 3 of 10 1. Exhibit Revision History Revision Date Description – 3/19/2026 Created RF Exposure Exhibit Page 4 of 10 2. Introduction The FCC, Innovation, Science and Economic Development Canada, European Union and Australia/New Zealand publish standards regarding the evaluation of the RF Exposure hazard of radio communications devices. An evaluation has been performed on the TCGP Demolition Hammer (Model No. 0149) pursuant to the relevant requirements. 3. Subject of Investigation This document presents the demonstration of RF Exposure compliance on a Demolition Hammer, (hereinafter referred to as the Equipment under Test (EUT)). The EUT was identified as follows: EUT Identification Description Demolition Hammer Model/Part No. 0149 S/N N/A The EUT is capable of operating in the following bands of the radio spectrum: Radio Spectrum Bands of Operation Bluetooth 2400MHz to 2483.5MHz 4. Standards and Requirements The tests were performed to selected portions of, and in accordance with the following specifications.  Federal Communications Commission "Code of Federal Regulations", Title 47, Chapter I, Subchapter A, Part 1, Subpart I, Section 1.1307  Federal Communications Commission "Code of Federal Regulations", Title 47, Chapter I, Subchapter A, Part 1, Subpart I, Section 1.1310  KDB …

Text truncated - open the document above for the full version.

BGM220S Wireless Gecko Bluetooth ® Module Data Sheet The BGM220S is a module designed and built to meet the per- formance, security, and reliability requirements of battery-powered IoT products running on Bluetooth networks. Based on the EFR32BG22 SoC, the BGM220S enables Bluetooth ® Low Energy connec- tivity while delivering best-in-class RF range and performance, future-proof capability for feature and OTA firmware updates, enhanced security features, and low energy con- sumption. BGM220S modules are a full solution that comes with fully-upgradeable, robust software stacks, world-wide regulatory certifications, advanced development and debugging tools, and support that will minimize and simplify the engineering and development of your end-products helping to accelerate their time-to-market. The BGM220S is intended for a broad range of applications, including: • Asset Tags and Beacons • Portable Medical • Sports, Fitness, and Wellness devices • Connected Home • Industrial and Building Automation • Bluetooth mesh Low Power Nodes KEY FEATURES • Bluetooth 5.4 • Built-in antenna or RF pin • Up to 6 dBm TX power • -98.6 dBm BLE RX sensitivity at 1 Mbps • 32-bit ARM Cortex-M33 core at up to 76.8 MHz • 512/32 kB of Flash/RAM memory • Optimal selection of MCU peripherals • 25 GPIO pins • 6 mm × 6 mm × 1.1 mm Lowest power mode with peripheral operational: EM4—Shutoff EM3—StopEM2—Deep SleepEM1—SleepEM0—Active Timers and Triggers 32-bit bus Peripheral Reflex System Serial Interfaces I/O Ports Analog I/F USART EUART External Interrupts General Purpose I/O Pin Reset Pin Wakeup ADC Energy Management Brown-Out Detector Voltage Regulator Power-On Reset SecurityClock Management HF Crystal Oscillator LF Crystal Oscillator Precision LF RC Oscillator HF RC Oscillator Crypto Acceleration Ultra LF RC Oscillator Core / Memory ARM Cortex TM M33 processor with DSP extensions, FPU and TrustZone ETMDebug InterfaceRAM Memory LDMA Controller Flash Program Memory Real Time Capture Counter Timer/ Counter Low Energy Timer Watchdog Timer Protocol Timer True Random Number Generator Fast Startup RC Oscillator Back-Up Real Time Counter I 2 C PDM DC-DC Converter Temperature Sensor Radio Subsystem RFSENSE w/ OOK Detect RX/TX Frontend with Integrated PA Frequency Synthesizer ARM Cortex TM M0+ Radio Controller CRC BUFC RAM FRC DEMOD AGC IFADC MOD Crystals Antenna Discrete Antenna Matching 38.4 MHz silabs.com | Building a more connected world.Copyright © 2025 by Silicon LaboratoriesRev. 1.3 1. Feature List •Supported Protocols • Bluetooth Low Energy (Bluetooth 5.4) • Direction finding • 1M, 2M, and LE Coded PHYs • Bluetooth Mesh Low Power Node •Wireless System-on-Chip • 2.4 GHz radio • TX power up to 6 dBm • High-performance 32-bit ARM Cortex-M33 ® with DSP in- struction and floating-point unit for efficient signal process- ing • Up to 512 kB flash program memory • 32 kB RAM data memory • Embedded Trace Macrocell (ETM) for advanced debugging •High Receiver Performance • -106.4 dBm sensitivity (0.1% BER) at 125 kbps GFSK • -102.3 dBm sensitivity (0.1% BER) at 500 kbps GFSK • -98.6 dBm sensitivity (0.1% BER) at 1 Mbps GFSK • -95.9 dBm sensitivity (0.1% BER) at 2 Mbps GFSK •Low-Energy Consumption • 4.2 mA RX current at 1 Mbps GFSK • 4.6 mA TX current at 0 dBm output power • 26 μA/MHz in Active Mode (EM0) • 1.40 μA EM2 DeepSleep current (RTCC running from LFXO, Full RAM retention) •Regulatory Certifications • CE and UKCA - EU and UK • FCC - USA • ISED - Canada • MIC - Japan • KC - South Korea • NCC - Taiwan • ANATEL - Brazil •Wide Operating Range • 1.8 to 3.8 V • -40 to +105 °C and -40 to +85 °C Versions Available •Dimensions • 6 mm × 6 mm × 1.1 mm •Security Features • Secure Boot with Root of Trust and Secure Loader (RTSL) • Hardware Cryptographic Acceleration for AES128/256, SHA-1, SHA-2 (up to 256-bit), ECC (up to 256-bit), ECDSA, and ECDH • True Random Number Generator (TRNG) compliant with NIST SP800-90 and AIS-31 • ARM ® TrustZone ® • Secure Debug with lock/unlock •Wide Selection of MCU Peripherals • Analog to Digital Converter (ADC) • 12-bit @ 1 Msps • 16-bit @ 76.9 ksps • 25 General Purpose I/O pins with output state retention and asynchronous interrupts • 8 Channel DMA Controller • 12 Channel Peripheral Reflex System (PRS) • 4 × 16-bit Timer/Counter with 3 Compare/Capture/PWM channels • 1 × 32-bit Timer/Counter with 3 Compare/Capture/PWM channels • 32-bit Real Time Counter • 24-bit Low Energy Timer for waveform generation • 1 × Watchdog Timer • 2 × Universal Synchronous/Asynchronous Receiver/Trans- mitter (UART/SPI/SmartCard (ISO 7816)/IrDA/I 2 S) • 1 × Enhanced Universal Asynchronous Receiver/Transmit- ter (EUART) • 2 × I 2 C interface with SMBus support • Digital microphone interface (PDM) • RFSENSE with selective OOK mode BGM220S Wireless Gecko Bluetooth ® Module Data Sheet Feature List silabs.com | Building a more connected world.Rev. 1.3 | 2 2. Ordering Information Table 2.1. Ordering Information Ordering CodeProtocol Stack TX Pow- er Rating Max CPU Speed Anten- na RF Shield Flash (kB) RAM (kB)GPIOTemp Range Packaging BGM220SC12WG A2 Bluetooth 5.40 dBm38.4 MHzBuilt-inNo3523225-40 to 85 °CCut Tape BGM220SC12WG A2R Bluetooth 5.40 dBm38.4 MHzBuilt-inNo3523225-40 to 85 °CReel BGM220SC22HNA 2 Bluetooth 5.4 • Direction Finding Rx 6 dBm76.8 MHzBuilt-inYes5123225-40 to 105 °CCut Tape BGM220SC22HNA 2R Bluetooth 5.4 • Direction Finding Rx 6 dBm76.8 MHzBuilt-inYes5123225-40 to 105 °CReel BGM220SC22WG A2 Bluetooth 5.46 dBm76.8 MHzBuilt-inYes3523225-40 to 85 °CCut Tape BGM220SC22WG A2R Bluetooth 5.46 dBm76.8 MHzBuilt-inYes3523225-40 to 85 °CReel Note: 1.End-product manufacturers must verify that the module is configured to meet regulatory limits for each region in accordance with the formal certification test reports. 2.Devices are pre-programmed with BGAPI UART DFU bootloader v1.10.2. 3.Throughout this document, the devices in the table above may be referred to by their product family name (e.g. BGM220S), by their model name (BG…

Text truncated - open the document above for the full version.

Engineering Test Report No. 2503044-01 Rev. A Report Date January 26, 2026 Manufacturer Name TCGP Manufacturer Address 13135 W Libson Rd Waukesha, WI 53005 Product Name Model No. HVIN Demolition Hammer 0149 3018-20 Date Received January 6, 2026 Test Dates January 6 and 9, 2026 Specifications FCC “Code of Federal Regulations” Title 47, Part 15, Subpart B FCC "Code of Federal Regulations" Title 47 Part 15, Subpart C, Section 15.247 Innovation, Science, and Economic Development Canada, RSS-GEN Innovation, Science, and Economic Development Canada, RSS-247 Test Facility Elite Electronic Engineering, Inc. 1516 Centre Circle, Downers Grove, IL 60515 FCC Reg. Number: 269750 IC Reg. Number: 2987A CAB Identifier: US0107 Signature Tested by Tylar Jozefczyk Signature Approved by Raymond J. Klouda, Re gistered Professional Engineer of Illinois – 44894 PO Number 280008773 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. This report shall not be reproduced, except in full, without the written approval of Elite Electronic Engineering Inc. Elite Electronic Engineering Incorporated certifies that the information contained in this report was obtained under conditions which meet or exceed those specified in the FCC "Code of Federal Regulations" Title 47 Part 15, Subpart C, Section 15.247 and Innovation, Science, and Economic Development Canada, RSS-247 test specifications. The data presented in this test report pertains to the EUT on the test dates specified. Any electrical or mechanical modifications made to the EUT subsequent to the specified test date will serve to invalidate the data and void this certification. This report must not be used to claim product certification, approval, or endorsement by A2LA, NIST, or any agency of the Federal Government. Engineering Test Report No. 2503044-01 Rev. A This report shall not be reproduced, except in full, without the written approval of Elite Electronic Engineering Inc. Page 2 of 52 Table of Contents 1. Report Revision History ........................................................................................................................... 3 2. Introduction .............................................................................................................................................. 4 2.1. Scope of Tests ......................................................................................................................................... 4 2.2. Purpose .................................................................................................................................................... 4 2.3. Identification of the EUT ........................................................................................................................... 4 3. Power Input .............................................................................................................................................. 4 4. Grounding ................................................................................................................................................ 4 5. Support Equipment .................................................................................................................................. 4 6. Interconnect Leads .................................................................................................................................. 4 7. Modifications Made to the EUT ................................................................................................................ 5 8. Modes of Operation ................................................................................................................................. 5 9. Test Specifications ................................................................................................................................... 5 10. Test Plan .................................................................................................................................................. 5 11. Deviations, Additions to, or Exclusions from Test Specifications ............................................................ 5 12. Laboratory Conditions .............................................................................................................................. 5 13. Summary .................................................................................................................................................. 6 14. Sample Calculations ................................................................................................................................ 6 15. Statement of Conformity .......................................................................................................................... 6 16. Certification .............................................................................................................................................. 6 17. Photographs …

Text truncated - open the document above for the full version.