P3DLT40-PAC-916Pole Attached Collator

APPENDIX G OF TEST REPORT T11129B Test Sample User Instructions (Manual) Manufacturer: CHK Wireless Technologies Australia Pty Ltd Test Sample: Pole Attached Collator Model: LT40-PAC-916 Serial No: 01045016 FCC ID: P3D LT40-PAC-916 Date: 7 January 2002 EMC Technologies Pty Ltd A.C.N. 057 105 549 16/6 Gladstone Rd Castle Hill, NSW 2154 Ph: + 612 9899 4599 Fax: + 612 9899 4019 email: [email protected] HTTP: www.emctech.com.au LT40 CMS / PAC Technical User Manual LT40 CMS-PAC User Manual _______________________________________________________________________________________________________________________________________________________________ FCC ID: P3D LT40-CMS-916 FCC ID: P3D LT40-PAC-916 These devices comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This device has been designed to operate with an antenna having a maximum gain of 15 dB. Antenna having higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms. N3207 WARNING: Any changes or modifications to LT40 devices not expressly approved by CHK Wireless Technologies can void the user’s authority to operate the equipment. ! © Copyright CHK Wireless Technologies Australia Pty. Ltd. The material presented in this manual is copyright protected 2000-2001 by CHK Wireless Technologies Australia Pty. Ltd. Any reproduction in whole or part for any purpose without the prior written consent of CHK Wireless is strictly prohibited. Information in this manual is subject to change without notice. All trademarks are property of their respective owners. “LT40 CMS-PAC User Manual.doc”, Revision 61 Printed in Australia. _______________________________________________________________________________ Proprietary Information of CHK Wireless Technologies Pty. Ltd. 2 of 21 LT40 CMS-PAC User Manual _______________________________________________________________________________________________________________________________________________________________ FCC ID: P3D LT40-CMS-916 FCC ID: P3D LT40-PAC-916 Table of Contents 1 Overview - Remote Network Monitoring......................................................................5 1.1 Specifications..............................................................................................................7 2 LT40 Local RF Communications...................................................................................8 3 LT40 Installation.............................................................................................................8 3.1 RF Communications.................................................................................................10 3.2 Solar Considerations.................................................................................................12 4 LT40 Data Storage Protocol.........................................................................................12 5 LT40 CMS (Conductor Mounted Sensor)...................................................................14 5.1 Introduction..............................................................................................................14 5.2 CMS Sensing............................................................................................................14 5.3 CMS Configuration..................................................................................................14 5.3.1 RF Configuration..............................................................................................14 5.3.2 Current Measurement Options:........................................................................14 5.3.3 Voltage Measurement Options:........................................................................15 5.3.4 Enable Event Logging......................................................................................15 5.3.5 Load Logging...................................................................................................15 5.3.6 LED Indication.................................................................................................15 5.3.7 Inhibit Trigger Until Time Sync.......................................................................15 5.3.8 Inrush Detection...............................................................................................15 5.4 Normal Mode............................................................................................................16 5.5 Event Mode...............................................................................................................16 5.6 Load Logging...........................................................................................................16 6 LT40 PAC (Pole Attached Collator)............................................................................17 6.1 Introduction..............................................................................................................17 6.2 PAC Configuration...................................................................................................17 6.2.1 RF Configuration..............................................................................................17 6.2.2 LED Indication.................................................................................................17 6.2.3 Health Check Period (Mins).............................................................................17 6.2.4 Time to First Health Check (Mins)...................................................................17 6.2.5 Send Load Log Data with Health Check.................…

Text truncated - open the document above for the full version.

APPENDIX B2 OF TEST REPORT T11129B Test Sample Identification Photographs Manufacturer: CHK Wireless Technologies Australia Pty Ltd Test Sample: Pole Attached Collator Model: LT40-PAC-916 Serial No: 01045023 FCC ID: P3D LT40-PAC-916 Date: 7 January 2002 EMC Technologies Pty Ltd A.C.N. 057 105 549 16/6 Gladstone Rd Castle Hill, NSW 2154 Ph: + 612 9899 4599 Fax: + 612 9899 4019 email: [email protected] HTTP: www.emctech.com.au FCC ID: P3D LT40-PAC-916Report No. T11129B Appendix B2 Page 2 of 2 TEST SAMPLE IDENTIFICATION PHOTOS

APPENDIX J OF TEST REPORT T11129B Labelling Manufacturer: CHK Wireless Technologies Australia Pty Ltd Test Sample: Pole Attached Collator Model: LT40-PAC-916 Serial No: 01045023 FCC ID: P3D LT40-PAC-916 Date: 7 January 2002 EMC Technologies Pty Ltd A.C.N. 057 105 549 16/6 Gladstone Rd Castle Hill, NSW 2154 Ph: + 612 9899 4599 Fax: + 612 9899 4019 email: [email protected] HTTP: www.emctech.com.au CHK WIRELESS TECHNOLOGIES PTY LTD FCC ID: P3D LT40-PAC-916 MADE IN AUSTRALIA MODEL/SERIAL NO. Label: LT40PAC 916MHz Product Label Drawing number: YY00109 Issue 2 Colours Background - Grey - Pantone 422 Text - Black Material - UV-V200 Polyester Adhesive - 3M 7952 Finish - Textured Clear Window (Without Adhesive) N3207 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: P3D LT40-916-PAC N3207 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: P3D LT40-916-PAC N3207 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: P3D LT40-916-PAC N3207 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: P3D LT40-916-PAC N3207 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: P3D LT40-916-PAC N3207 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: P3D LT40-916-PAC N3207 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: P3D LT40-916-PAC N3207 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: P3D LT40-916-PAC N3207 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: P3D LT40-916-PAC N3207 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: P3D LT40-916-PAC N3207 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: P3D LT40-916-PAC N3207 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: P3D LT40-916-PAC N3207 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: P3D LT40-916-PAC N3207 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: P3D LT40-916-PAC N3207 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: P3D LT40-916-PAC N3207 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: P3D LT40-916-PAC N3207 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: P3D LT40-916-PAC N3207 This device complies with Part 15 of the FCC Rules. Operation …

Text truncated - open the document above for the full version.

Page 1 of 9 EMI TEST REPORT for CERTIFICATION of TRANSCEIVER to FCC PART 15.249 Manufacturer:CHK Wireless Technologies Australia Pty Ltd Test Sample:Pole Attached Collator Model:LT40-PAC-916 Serial No:01045023 FCC ID:P3D LT40-PAC-916 Date:7 January 2002 This document must not be copied or reproduced except in full, without the written permission of the Manager, EMC Technologies Pty Ltd. EMC Technologies Pty Ltd A.C.N. 057 105 549 16/6 Gladstone Rd Castle Hill, NSW 2154 Ph: + 612 9899 4599 Fax: + 612 9899 4019 email: [email protected] HTTP: www.emctech.com.au FCC ID: P3D LT40-PAC-916Report No. T11129B Page 2 of 9 EMC Technologies Pty Ltd 16/6 Gladstone Rd Castle Hill NSW 2154 Australia Tel: +61 2 98994599 Fax: +61 2 98994019 EMI TEST REPORT FOR CERTIFICATION Of TRANSCEIVER To FCC Part 15.249 CERTIFICATION OF COMPLIANCE WITH FCC PART 15 REGULATIONS EMC Technologies Report No. T11129B CONTENTS 1. Summary Of Test Results 2. General Information 3. System Test Configuration 4. Radiated EMI Measurements 5. Radiated EMI Results 6. Conclusions APPENDIX A. Instrumentation Calibration Details APPENDIX B1 Test Setup Photographs APPENDIX B2 Test Sample Identification Photographs APPENDIX B3 Test Sample Internal and PCB Photographs APPENDIX C. Graphs of EMI Measurement APPENDIX D. Test Sample Schematics APPENDIX E. Test Sample PCB Layouts APPENDIX F. Test Sample Antenna Specifications APPENDIX G. User Instructions (Manual) APPENDIX H. Transceiver Module (Designer Guide) APPENDIX I. Block Diagram APPENDIX J. Labelling – Drawing and Location FCC ID: P3D LT40-PAC-916Report No. T11129B Page 3 of 9 EMC Technologies Pty Ltd 16/6 Gladstone Rd Castle Hill NSW 2154 Australia Tel: +61 2 98994599 Fax: +61 2 98994019 EMI TEST REPORT FOR CERTIFICATION OF FCC PART 15.249 TRANSCEIVER Report No. :T11129B Tested For :CHK Wireless Technologies Australia Pty Ltd Phone:+61 2 9874 3899 Fax :+61 2 9874 4546 Responsible Party :Peter Wyatt Manufacturer:CHK Wireless Technologies Australia Pty Ltd Test Sample:Pole Attached Collator Model:LT40-PAC-916 Serial Number:01045023 FCC ID:P3D LT40-PAC-916 Equipment Type :Intentional Radiator, Low Power Transceiver Test Standards:FCC Part 15 Section 249 Intentional Radiators ANSI C63.4-1992 OET Bulletin No.63, October 1993 Test Date/s :27 th November 2001, 28 th November 2001 Test Officer/s: Sebastian Beier Bruce Holdsworth Attestation: :I hereby certify that the device(s) described herein were tested as described in this report and that the data included is that which was obtained during such testing. Les Dickenson Sydney Manager EMC Technologies Pty Ltd. FCC ID: P3D LT40-PAC-916Report No. T11129B Page 4 of 9 EMC Technologies Pty Ltd 16/6 Gladstone Rd Castle Hill NSW 2154 Australia Tel: +61 2 98994599 Fax: +61 2 98994019 EMI TEST REPORT FOR CERTIFICATION to FCC PART 15.249 on the LT40-PAC-916 Pole Attached Collator 1. INTRODUCTION This report details the results of EMI test and measurements performed on the conductor mounted sensor, Model: LT40-PAC-916, in accordance with the Federal Communications Commission (FCC) regulations as detailed in Title 47 CFR, FCC Part 15 Rules for intentional radiators. The test sample was found to comply with the requirements for fundamental frequencies and spurious emissions of section 15.249. 1.1 Summary of Test Results Transmitter Fundamental Frequency: 916.28MHz, Complied with a margin of 7.9dB. Transmitter Spurious and Harmonics:Complies with a margin of greater than 10dB. Receiver Spurious: Complies with a margin of greater than 10dB. The measurement procedure used was in accordance with ANSI C63.4 1992 and OET Bulletin No. 63. The instrumentation conformed to the requirements of ANSI C63.2-1987. 1.2 Modifications No modifications were required to ensure compliance with this standard. FCC ID: P3D LT40-PAC-916Report No. T11129B Page 5 of 9 EMC Technologies Pty Ltd 16/6 Gladstone Rd Castle Hill NSW 2154 Australia Tel: +61 2 98994599 Fax: +61 2 98994019 2. GENERAL INFORMATION 2.1Product Specifications The Equipment Under Test (EUT) was identified as follows: Manufacturer:CHK Engineering Australia Pty Ltd Test Sample:Pole Attached Collator Model:LT40-PAC-916 Serial No:01045023 FCC ID:P3D LT40-PAC-916 Power Supply:2V rechargeable sealed lead acid battery Centre Frequency:916.48MHz Transmit Power:-5dBm (maximum), -6dBm (nominal) Modulation:FM Baud Rate:19200 bits per second (Manchester encoded data) Antenna Type:¼ wave monopole antenna. *1 Antenna Gain:2dBi Enclosure: Plastic 1 – Note, the antenna is not permanently attached. The antenna is attached to the device via an SMA connector. The antenna is only to be installed by professionals as the device is a pole conductor transmitter used by utility companies. Refer to Appendix F–Antenna Specifications and Appendix G-Users manual. 2.2 Product Description The LT40 Pole Attached Collators are mounted on the pole of a high voltage overhead conductor and receive data via radio transmission directly from conductor mounted sensors. The LT40 PAC collates and analyses the data. The data may be retrieved directly at the base of the pole via a laptop and RS232 cable or transmitted to a control room for analysis. 2.3 EUT Operating Conditions Each LT40PAC communicates using local low-power RF communication. This communication system is half duplex 916.48 MHz FSK and allows data to be written to and read from any device without uninstalling or physical contact. In order to reduce battery power consumption of LT40s, the internal RF Transceivers are powered OFF for the majority of time. The receiver typically polls for only 50 ms every second. This polling interval may also be altered under user control for specific applications, but will be reset whenever the unit is reset. 2.4 EUT Configurations During testing of the transmitter, the LT40 PAC was set up to transmit continuously. During testing of the receiver, the LT40 PAC was set up to receive continuously. A new fully charged battery was used during testing. FCC ID: …

Text truncated - open the document above for the full version.

APPENDIX C OF TEST REPORT T11129B Graphs of EMI Measurements Manufacturer:CHK Wireless Technologies Australia Pty Ltd Test Sample:Pole Attached Collator Model:LT40-PAC-916 Serial No:01045023 FCC ID:P3D LT40-PAC-916 Date:7 January 2002 EMC Technologies Pty Ltd A.C.N. 057 105 549 16/6 Gladstone Rd Castle Hill, NSW 2154 Ph: + 612 9899 4599 Fax: + 612 9899 4019 email: [email protected] HTTP: www.emctech.com.au FCC ID: P3D LT40-PAC-916 Report No. T11129B Appendix C Page 2 of 11 Graphs of EMI Measurements Graph 1:Vertical Emissions, 30MHz to 1000MHz, EUT Transmitting Graph 2:Horizontal Emissions, 30MHz to 1000MHz, EUT Transmitting Graph 3:Carrier Zoom, 910 to 920 MHz, EUT Transmitting Graph 4:Vertical Emissions, 30MHz to 1000MHz, EUT Receiving Graph 5:Horizontal Emissions, 30MHz to 1000MHz, EUT Receiving Graph 6:Vertical Emissions, 1GHz to 10GHz, EUT Transmitting Graph 7:Horizontal Emissions, 1GHz to 10GHz, EUT Transmitting Graph 8:Vertical Emissions, 1GHz to 6GHz, EUT Receiving Graph 9:Horizontal Emissions, 1GHz to 6GHz, EUT Receiving EMC Technologies Pty. Ltd. - Global Product Certification FCC Part 15 Project No:T11129B Test Date: 27/11/01 GRAPH No. 1 p:\pcf\11129_6.PCF Melbourne- 57 Assembly Drv Tullamarine, 3043, Vic, Australia Ph+(613) 9335 3333 Fax+(613) 9338 9260 Sydney---- 16,6 Gladstone Rd Castle Hill, 2154, NSW, Australia Ph+(612) 9899 4599 Fax+(612) 9899 4019 CHK Wireless Technologies Australia Pty Ltd Pole Attached Collator Model No: PAC Serial No: 01045023 EUT Transmitting FCC ID: P3D LT40-PAC-916 Radiated Emissions dBuV/m Peak \t11129r t11129r2 # = Ambient ~--- = QP Level Limits:Legend: Source: _ Fcc15249 FCC 15.249 Intentional Radiator Limits __ Vertical Ambients __ Vertical Fields 3 4 5 6 7 8 1 7 8 8 10 11 3 1 2 sydney radiated setup Site ID: Colo #1 Test Officer:Bruce Holdsworth Peaks: NoFreqPeakQp ValFcc15249 dL1 (MHz)(dBuV/m)(dBuV/m)(dB) 1916.4878.778.994.0-15.1 Frequency (MHz) 100 29 1000 0 10 20 30 40 50 60 70 80 90 100 v ^ 1 ~ # # # # # # # # # # # # # # # # # EMC Technologies Pty. Ltd. - Global Product Certification FCC Part 15 Project No:T11129B Test Date: 27/11/01 GRAPH No. 2 p:\pcf\11129_7.PCF Melbourne- 57 Assembly Drv Tullamarine, 3043, Vic, Australia Ph+(613) 9335 3333 Fax+(613) 9338 9260 Sydney---- 16,6 Gladstone Rd Castle Hill, 2154, NSW, Australia Ph+(612) 9899 4599 Fax+(612) 9899 4019 CHK Wireless Technologies Australia Pty Ltd Pole Attached Collator Model No: PAC Serial No: 01045023 EUT Transmitting FCC ID: P3D LT40-PAC-916 Radiated Emissions dBuV/m Peak \t11129r t11129r2 # = Ambient ~--- = QP Level Limits:Legend: Source: _ Fcc15249 FCC 15.249 Intentional Radiator Limits __ Horizontal Ambients __ Horizontal Fields 9 10 11 12 13 2 12 13 14 15 16 5 4 6 sydney radiated setup Site ID: Colo #1 Test Officer:Bruce Holdsworth Peaks: NoFreqPeakQp ValFcc15249 dL1 (MHz)(dBuV/m)(dBuV/m)(dB) 1916.4886.186.194.0-7.9 2902.1735.832.146.0-13.9 Frequency (MHz) 100 29 1000 0 10 20 30 40 50 60 70 80 90 100 v ^ 1 ~ v ^ 2 ~ # # # # # # # # # # # # # # # EMC Technologies Pty. Ltd. - Global Product Certification FCC Part 15 Project No:T11129B Test Date: 27/11/01 GRAPH No. 3 p:\pcf\11129_8.PCF Melbourne- 57 Assembly Drv Tullamarine, 3043, Vic, Australia Ph+(613) 9335 3333 Fax+(613) 9338 9260 Sydney---- 16,6 Gladstone Rd Castle Hill, 2154, NSW, Australia Ph+(612) 9899 4599 Fax+(612) 9899 4019 CHK Wireless Technologies Australia Pty Ltd Pole Attached Collator Model No: PAC Serial No: 01045023 EUT Transmitting FCC ID: P3D LT40-PAC-916 Radiated Emissions dBuV/m Peak t11129r2 # = Ambient ~--- = QP Level Limits:Legend: Source: _ Fcc15249 FCC 15.249 Intentional Radiator Limits __ Horizontal Ambients __ Horizontal Fields 12 13 14 15 16 5 4 6 sydney radiated setup Site ID: Colo #1 Test Officer:Bruce Holdsworth Peaks: NoFreqPeakQp ValFcc15249 dL1 (MHz)(dBuV/m)(dBuV/m)(dB) 1916.4886.186.194.0-7.9 Frequency (MHz) 910 920 10 20 30 40 50 60 70 80 90 100 v ^ 1 ~ EMC Technologies Pty. Ltd. - Global Product Certification FCC Part 15 Project No:T11129B Test Date: 27/11/01 GRAPH No. 4 p:\pcf\11129_9.PCF Melbourne- 57 Assembly Drv Tullamarine, 3043, Vic, Australia Ph+(613) 9335 3333 Fax+(613) 9338 9260 Sydney---- 16,6 Gladstone Rd Castle Hill, 2154, NSW, Australia Ph+(612) 9899 4599 Fax+(612) 9899 4019 CHK Wireless Technologies Australia Pty Ltd Pole Attached Collator Model No: PAC Serial No: 01045023 EUT Receiving FCC ID: P3D LT40-PAC-916 Radiated Emissions dBuV/m Peak \t11129r t11129r3 # = Ambient ~--- = QP Level Limits:Legend: Source: _ Fcc15249R FCC 15.249 Intentional Radiator Limits __ Vertical Ambients __ Vertical Fields 3 4 5 6 7 8 1 8 9 10 11 12 3 2 4 sydney radiated setup Site ID: Colo #1 Test Officer:Bruce Holdsworth Frequency (MHz) 100 29 1000 0 10 20 30 40 50 60 70 80 90 100 # # # # # # # # # # # # # # # # # # # # # # # # # EMC Technologies Pty. Ltd. - Global Product Certification FCC Part 15 Project No:T11129B Test Date: 27/11/01 GRAPH No. 5 p:\pcf\11129_10.PCF Melbourne- 57 Assembly Drv Tullamarine, 3043, Vic, Australia Ph+(613) 9335 3333 Fax+(613) 9338 9260 Sydney---- 16,6 Gladstone Rd Castle Hill, 2154, NSW, Australia Ph+(612) 9899 4599 Fax+(612) 9899 4019 CHK Wireless Technologies Australia Pty Ltd Pole Attached Collator Model No: PAC Serial No: 01045023 EUT Receiving FCC ID: P3D LT40-PAC-916 Radiated Emissions dBuV/m Peak \t11129r t11129r3 # = Ambient ~--- = QP Level Limits:Legend: Source: _ Fcc15249R FCC 15.249 Intentional Radiator Limits __ Horizontal Ambients __ Horizontal Fields 9 10 11 12 13 2 13 14 15 16 17 5 6 7 sydney radiated setup Site ID: Colo #1 Test Officer:Bruce Holdsworth Frequency (MHz) 100 29 1000 0 10 20 30 40 50 60 70 80 90 100 # # # # # # # # # # # # EMC Technologies Pty. Ltd. - Global Product Certification FCC Part 15 Project No:T11129B Test Date: 28/11/01 GRAPH No. 6 p:\pcf\11129_13.PCF Melbourne- 57 Assembly Drv Tullamarine, 3043, Vic, Australia Ph+(613) 9335 3333 Fax+(613) 9338 9260 Sydney---- 16,6 Gladstone Rd Castle Hill, 2154, NSW, Australia Ph+(612) 9899 45…

Text truncated - open the document above for the full version.

APPENDIX B1 OF TEST REPORT T11129B Test Setup Photographs Manufacturer: CHK Wireless Technologies Australia Pty Ltd Test Sample: Pole Attached Collator Model: LT40-PAC-916 Serial No: 01045023 FCC ID: P3D LT40-PAC-916 Date: 7 January 2002 EMC Technologies Pty Ltd A.C.N. 057 105 549 16/6 Gladstone Rd Castle Hill, NSW 2154 Ph: + 612 9899 4599 Fax: + 612 9899 4019 email: [email protected] HTTP: www.emctech.com.au FCC ID: P3D LT40-PAC-916Report No. T11129B Appendix B1 Page 2 of 2 RADIATED EMI – TEST SETUP