P4Q-N496Tablet

N496(x) Series User Manual 1 Table of contents Your device at a glance ......................................................................................2 Charging the battery ..........................................................................................3 Turning the device ON and OFF .......................................................................4 Sleep mode ..................................................................................................4 Airplane mode .............................................................................................5 Installing a memory card ...................................................................................5 Connecting to a computer ................................................................................6 Connecting a USB device ...................................................................................6 Mounting the device ..........................................................................................6 Navigating on the screen...................................................................................7 Home screen ........................................................................................................7 Customizing your device ...................................................................................8 WLAN connection ......................................................................................8 Bluetooth connection ................................................................................9 Caring for your device ........................................................................................9 Troubleshooting ..........................................................................................9 Caring for your device ..............................................................................10 Regulatory information ....................................................................................11 FCC ...............................................................................................................11 IC ..................................................................................................................12 Safety precautions ....................................................................................13 2 Your device at a glance Note: Depending upon the specific model purchased, the color and look of your device and accessories may not exactly match the graphics shown in this document. ❶ Microphone ❷ Light sensor ❸ Touch screen ❹ Speaker* ❺ Power button ❻ Volume buttons ❼ Mute button ❽ Camera button ❾ P1/Back button ❿ P2/Home button ⓫ P3/Menu button ⓬ Cradle screws* ⓭ Speaker* ⓮ Dock connector* ⓯ Mini-USB connector ⓰ NFC sensor* ⓱ Headphone jack ⓲ USB port ⓳ Memory card slot ⓴ Cover latch *For selected models only 3 Charging the battery Note: Use only the charger supplied with your device. Use of another type of charger will result in malfunction and/or danger. When charging the battery for the very first time, you should charge it for at least 8 hours (using the AC charger) with your device turned off. 1. Push the tap outwards, plug the converter to the AC charger and then push the tap inwards to lock the converter in place ( ❶ ). 2. Open the connector cover on your device and connect the charger cable to the mini- USB connector ( ❷ ). 3. Plug the AC charger into a wall outlet ( ❸ ). CAUTION: For optimal performance of the lithium battery: y Do not charge the battery where the temperature is high (e.g. in direct sunlight). y Recharge the battery when it is nearly discharged. When recharging, make sure that the battery is fully charged. Doing so can extend the battery life. y If you will not use the product for a long period of time (over one month) or find the discharge/ recharge time has been shortened, be sure to fully discharge the battery first before recharging it. You are also advised to fully discharge and recharge the battery once every 1~2 months. y Failure to follow the battery usage instructions could cause damage to your device, battery and even bodily injury or property damage and will void the warranty. 4 Turning the device ON and OFF 1. Press the Power button on the right side of the device to turn on your device. Wait for the boot screen to display. 2. The Home screen will display and the device is in Lock mode by default. Drag the Lock icon () to the right. The device is ready for use. 3. To turn off the devide, press and hold the Power button until the option window displays. Then tap Power off  OK. Note: You can also choose to restart the device by selecting Restart from the option window. Sleep mode Your device will automatically switch off the screen after 1 minute (by default) of inactivity. You can manually switch off the screen by pressing the Power button briefly. To resume the screen, press the Power button briefly and then unlock the device by dragging the Lock icon () to the right. To change the settings, tap on the desktop  Settings  Display  Sleep. 5 Airplane mode When you are in an airplane or in the area where data transferring is not allowed, enable Airplane mode. You will be able to use many of your device’s applications (such as playing games or listening music), but all wireless radios, including wireless network (WLAN) and Bluetooth, on the device are turned off – it cannot send or receive data. To enable Airplane mode: press and hold the Power button until the option window displays. Then tap Airplane mode. The icon in the status bar indicates that Airplane mode is on. To disable Airplane mode: tap on the desktop  Settings  More, and then cancel the selection in Airplane mode. Installing a memory card CAUTION: Do not apply pressure to the center of the memory card. Slide the cover latch to open the cover on the left side of the device to locate the memory card slot. Noting the card orientation, hold the card (MicroSD) by the edges an…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3

Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20

FCC SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 29 Report No. : SA150618C17 Issued Date : Aug. 04, 2015 FCC SAR Test Report Report No. : SA150618C17 Applicant : MITAC International Corp Address : Building B, No. 209, Sec. 1, Nan Gang Rd., Nan Gang Dist., Taipei 11568, Taiwan, R.O.C. Product : Tablet FCC ID : P4Q-N496 Brand : MiTAC, Mio, MAGELLAN, NAVMAN, MioCARE, MioWORK Model No. : N496 Standards : FCC 47 CFR Part 2 (2.1093) / IEEE C95.1:1992 / IEEE 1528:2003 IEEE 1528a-2005 / KDB 865664 D01 v01r03 / KDB 865664 D02 v01r01 KDB 248227 D01 v02r01 / KDB 447498 D01 v05r02 / KDB 616217 D04 v01r01 Sample Received Date : Jun. 18, 2015 Date of Testing : Jul. 28, 2015 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch – Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Gina Liu / Specialist Approved By : Gordon Lin / Assistant Manager This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. FCC SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 29 Report No. : SA150618C17 Issued Date : Aug. 04, 2015 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 6 3.2 SPEAG DASY System ................................................................................................................................................. 6 3.2.1 Robot.................................................................................................................................................................. 7 3.2.2 Probes ................................................................................................................................................................ 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................... 8 3.2.4 Phantoms ........................................................................................................................................................... 9 3.2.5 Device Holder ................................................................................................................................................... 10 3.2.6 System Validation Dipoles ................................................................................................................................ 10 3.2.7 Tissue Simulating Liquids ................................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 14 3.4 SAR Measurement Procedure ................................................................................................................................... 15 3.4.1 Area & Zoom Scan Procedure ......................................................................................................................... 15 3.4.2 Volume Scan Procedure................................................................................................................................... 15 3.4.3 Power Drift Monitoring ...................................................................................................................................... 16 3.4.4 Spatial Peak SAR Evaluation ..............................................................................................…

Text truncated - open the document above for the full version.

Report No.: RF150618C17-1 Page No. 1 / 83 Report Format Version:6.1.1 FCC Test Report Report No.: RF150618C17-1 FCC ID: P4Q-N496 Test Model: N496 Received Date: Jun. 18, 2015 Test Date: Jun. 26, 2015 ~ Aug. 20, 2015 Issued Date: Aug. 24, 2015 Applicant: MITAC International Corp. Address: Building B, No. 209, Sec. 1, Nan Gang Rd., Nan Gang Dist., Taipei 11568, Taiwan, R.O.C. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) Test Location (1): No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF150618C17-1 Page No. 2 / 83 Report Format Version:6.1.1 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ........................................................................................................................... 5 2 Summary of Test Results ........................................................................................................................... 6 2.1 Measurement Uncertainty ..................................................................................................................... 6 2.2 Modification Record .............................................................................................................................. 6 3 General Information ................................................................................................................................... 7 3.1 General Description of EUT .................................................................................................................. 7 3.2 Description of Test Modes..................................................................................................................... 9 3.2.1 Test Mode Applicability and Tested Channel Detail ................................................................... 11 3.3 Duty Cycle of Test Signal .................................................................................................................... 13 3.4 Description of Support Units ............................................................................................................... 17 3.4.1 Configuration of System under Test ......................................................................................... 17 3.5 General Description of Applied Standards .......................................................................................... 17 4 Test Types and Results ............................................................................................................................ 18 4.1 Radiated Emission and Bandedge Measurement .............................................................................. 18 4.1.1 Limits of Radiated Emission and Bandedge Measurement ..................................................... 18 4.1.2 Limits of Unwanted Emission Out of The Restricted Bands ..................................................... 18 4.1.3 Test Instruments ....................................................................................................................... 19 4.1.4 Test Procedures ........................................................................................................................ 20 4.1.5 Deviation from Test Standard ................................................................................................... 20 4.1.6 Test Set Up ............................................................................................................................... 21 4.1.7 EUT Operating Conditions ........................................................................................................ 21 4.1.8 Test Results .............................................................................................................................. 22 4.2 Conducted Emission Measurement .................................................................................................... 59 4.2.1 Limits of Conducted Emission Measurement ........................................................................... 59 4.2.2 Test Instruments ....................................................................................................................... 59 4.2.3 Test Procedures ...................................................................................................................…

Text truncated - open the document above for the full version.

Report No.: RF150618C17-2 Page No. 1 / 24 Report Format Version: 6.1.1 DFS Test Report Report No.: RF150618C17-2 FCC ID: P4Q-N496 Test Model: N496 Received Date: Jun. 18, 2015 Test Date: Aug. 17 ~ Aug. 19, 2015 Issued Date: Aug. 20, 2015 Applicant: MITAC International Corp Address: Building B, No. 209, Sec. 1, Nan Gang Rd., Nan Gang Dist., Taipei 11568, Taiwan, R.O.C. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C.) Test Location: No.19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN (R.O.C.) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF150618C17-2 Page No. 2 / 24 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 EUT Information .................................................................................................................................... 5 2.1 Operating Frequency Bands and Mode of EUT .................................................................................. 5 2.2 EUT Software and Firmware Version .................................................................................................. 5 2.3 Description Of Available Antennas to The EUT .................................................................................. 5 2.4 EUT Maximum Conducted Power ....................................................................................................... 6 2.5 EUT Maximum E.I.R.P. Power ............................................................................................................ 7 2.6 Transmit Power Control (TPc) ............................................................................................................. 8 2.7 Statement of Maunfacturer .................................................................................................................. 8 3. U-NII DFS Rule Requirements ............................................................................................................. 9 3.1 Working Modes and Required Test Items ........................................................................................... 9 3.2 Test Limits And Radar Signal Parameters ........................................................................................ 10 4. Test & Support Equipment List ......................................................................................................... 13 4.1 Test Instruments ................................................................................................................................ 13 4.2 Description of Support Units ............................................................................................................. 13 5. Test Procedure .................................................................................................................................... 14 5.1 ADT DFS Measurement System ....................................................................................................... 14 5.2 Calibration of DFS Detection Threshold Level .................................................................................. 15 5.3 Deviation From Test Standard ........................................................................................................... 15 5.4 Radiated Test Setup Configuration ................................................................................................... 16 5.4.1 Client Without Radar Detection Mode ............................................................................................... 16 6. Test Results ......................................................................................................................................... 17 6.1 Summary of Test Results .................................................................................................................. 17 6.2 Test Results ....................................................................................................................................... 18 6.2.1 Test Mode: Device Operating In Client Without Radar Detection Mode. .......................................... 18 6.2.2 Channel Closing Transmission And Channel Move Time ................................................................. 19 6.2.3 No…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION Set UUT as Client without radar detection mode (Radar injected into Master) Radar ( Radiated ) Master UUT Receiver Antenna to S.A.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST (WLAN 2.4GHz/ Bluetooth/ Bluetooth LE) (Below 1GHz) 3 RADIATED EMISSION TEST (WLAN 2.4GHz/ Bluetooth/ Bluetooth LE) (Above 1GHz) 4 RADIATED EMISSION TEST (5180-5240MHz & 5260-5320MHz & 5745-5825MHz) (Below 1GHz) 5 RADIATED EMISSION TEST (5180-5240MHz & 5260-5320MHz & 5745-5825MHz) (Above 1GHz) 6 RADIATED EMISSION TEST (5500-5700MHz) (Below 1GHz) 7 RADIATED EMISSION TEST (5500-5700MHz) (Above 1GHz)

FCC SAR Test Report Report Format Version 5.0.0 Issued Date : Aug. 04, 2015 Report No. : SA150618C17 Appendix D. Photographs of EUT and Setup FCC SAR Test Report Report Format Version 5.0.0 Report No. : SA150618C17 <Photographs of EUT> <Antenna Location> The separation distance for antenna to edge: Antenna To Top Side (mm) To Bottom Side (mm) To Left Side (mm) To Right Side (mm) WLAN / BT 5 115 167 17.5 Bottom Side Top Side Left Side Right Side <EUT Front View> WLAN / BT Antenna FCC SAR Test Report Report Format Version 5.0.0 Report No. : SA150618C17 <Photographs of SAR Setup> Rear Face of EUT with 0 cm Gap Right Side of EUT with 0 cm Gap Top Side of EUT with 0 cm Gap