P4Q-N635AChiron pro

N635 User Manual Revision: R00 (December 2019) Trademark All brand and product names are trademarks or registered trademarks of their respective companies. Disclaimer Spec ifications and documents are subject to change without notice. Note Not all models are available in all regions. Not all features are available on all models. Depending on the specific model purchased, the colour and look of your device and accessories may not exactly match the graphic s shown in this document. The screenshots and other presentations shown in this document are for reference only. Table of Contents Device Basics ................................................................................................................... 4 Getting to Know Your Device ................................................................................ 4 Installing and Charging the Battery Pack .............................................................. 4 Using a Micro-SIM Card ........................................................................................ 6 Using a Memory Card............................................................................................ 6 Turning the Device On and Off .............................................................................. 7 Turning On .................................................................................................. 7 Sleep Mode ................................................................................................. 7 Aeroplane Mode ......................................................................................... 8 Restarting the Device ................................................................................. 8 Turning Off .................................................................................................. 8 Shutting Down ............................................................................................ 8 Getting Started ................................................................................................................. 9 Using the Touch Screen ........................................................................................ 9 Home Screen ....................................................................................................... 10 Your Apps ............................................................................................................ 10 Customising Your Device ............................................................................................... 11 Cellular Data Connection..................................................................................... 11 Wireless Network Connection ............................................................................. 11 Connecting to a Wireless Network ............................................................ 11 Removing a Remembered Network .......................................................... 12 Bluetooth ............................................................................................................. 12 Pairing with Another Bluetooth Device ..................................................... 12 Disconnecting a Bluetooth Connection ..................................................... 12 Reference ....................................................................................................................... 13 Caring for the Device ........................................................................................... 13 Regulatory Information ........................................................................................ 13 FCC .......................................................................................................... 14 IC .............................................................................................................. 14 CE ............................................................................................................. 15 RF Exposure Information (SAR) ............................................................... 16 WEEE ....................................................................................................... 16 Bluetooth ................................................................................................... 16 Safety Precautions .............................................................................................. 16 About Charging ......................................................................................... 16 About the Charger .................................................................................... 17 About the Battery ...................................................................................... 17 Device Basics Getting to Know Your Device Front-Side View ❶ NFC sensor* ❷ Front camera lens ❸ Light sensor ❹ Power button ❺ Volume buttons ❻ Touch screen ❼ Microphone *For selected models only Rear-Side View ❶ Rear camera lens ❷ Flash ❸ Microphone ❹ Screw hole for cradle ❺ Socket for cradle ❻ Dock connector ❼ Speaker ❽ Accessory screw hole Right-Side View ❶ Micro-SIM card slot* ❷ Memory card slot *To use cellular services, you must have a subscription to the function with a mobile phone network service. Bottom-Side View ❶ U SB Type C connector Using a Micro-SIM Card The device uses a Micro-SIM card. Open the cover on the right side of the device to locate the Micro-SIM card slot. With its label side facing the rear side of the device, hold the Micro-SIM card by the edges and gently insert it into the slot. Note that inserting the card in the reverse direction may cause damage. To remove a card, gently push the top edge of the card inwards to release it, and pull it out of the slot. Using a Memory Card Open the cover on the right side of the device to locate the memory card slot. With its label side facing the rear side of the device, hold the MicroSD card by the edges and gently insert it into the slot. Note that inserting the card in the…

Text truncated - open the document above for the full version.

Page 1 / 37 Report No.: T191105W01 Rev.: 00 APPENDIX 1 - PHOTOGRAPHS OF EUT EXTERNAL PHOTOGRAPHS OF EUT Page 2 / 37 Report No.: T191105W01 Rev.: 00 Page 3 / 37 Report No.: T191105W01 Rev.: 00 Page 4 / 37 Report No.: T191105W01 Rev.: 00 Page 5 / 37 Report No.: T191105W01 Rev.: 00 Page 6 / 37 Report No.: T191105W01 Rev.: 00 Cable Page 7 / 37 Report No.: T191105W01 Rev.: 00 Page 8 / 37 Report No.: T191105W01 Rev.: 00 Adapter CarCharge Page 9 / 37 Report No.: T191105W01 Rev.: 00 Cradle: 635-V Page 10 / 37 Report No.: T191105W01 Rev.: 00 Page 11 / 37 Report No.: T191105W01 Rev.: 00 Page 12 / 37 Report No.: T191105W01 Rev.: 00 Cradle: 635VL Page 13 / 37 Report No.: T191105W01 Rev.: 00 Page 14 / 37 Report No.: T191105W01 Rev.: 00 Page 15 / 37 Report No.: T191105W01 Rev.: 00 Page 16 / 37 Report No.: T191105W01 Rev.: 00 Cradle: n564 cradle Page 17 / 37 Report No.: T191105W01 Rev.: 00 Page 18 / 37 Report No.: T191105W01 Rev.: 00 Page 19 / 37 Report No.: T191105W01 Rev.: 00 Page 20 / 37 Report No.: T191105W01 Rev.: 00 Page 21 / 37 Report No.: T191105W01 Rev.: 00 Cradle: n564_tn Page 22 / 37 Report No.: T191105W01 Rev.: 00 Page 23 / 37 Report No.: T191105W01 Rev.: 00 Page 24 / 37 Report No.: T191105W01 Rev.: 00 Page 25 / 37 Report No.: T191105W01 Rev.: 00 Page 26 / 37 Report No.: T191105W01 Rev.: 00 Cradle: n635_vhg Page 27 / 37 Report No.: T191105W01 Rev.: 00 Page 28 / 37 Report No.: T191105W01 Rev.: 00 Page 29 / 37 Report No.: T191105W01 Rev.: 00 Page 30 / 37 Report No.: T191105W01 Rev.: 00

TF-LABEL;RATING,2/3,DEVICE,US,F740s,Chiron Pro 242N63500010 R00 Model: N635 FCC ID P4Q-N635A Input: 5V 2A IC : 2420C-N635A Made in China XX-X K Caution: Only use the specified power supply (see user’s manual)  50#白色压花PET + PET 25N NPL QPM (避免高濕溫測試時產生氣泡)     Bruno.Chen George.Chien 2018/08/28 2018/08/28 61.6 60.2 DIGITAL TECHNOLOGY CORP. Amy.Sheng 2019/12/26 Amy.Sheng 2019/12/26 2018/08/28 Mandy,Gao 2019/12/26 2018/08/28 Jimmy.Qian 2019/12/26 BC P/N: 242N63500010 R00 DID: D046978

Label location Back Side Label

Page 31 / 37 Report No.: T191105W01 Rev.: 00 INTERNAL PHOTOGRAPHS OF EUT Page 32 / 37 Report No.: T191105W01 Rev.: 00 RF IC & Crystal Page 33 / 37 Report No.: T191105W01 Rev.: 00 LTE Antenna Main-1 LTE Antenna Aux-2 Page 34 / 37 Report No.: T191105W01 Rev.: 00 NFC Antenna Page 35 / 37 Report No.: T191105W01 Rev.: 00 GPS Antenna Page 36 / 37 Report No.: T191105W01 Rev.: 00 LTE RF IC Page 37 / 37 Report No.: T191105W01 Rev.: 00 Battery BT ＆ WIFI Crystal

Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e- document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Compliance Certification Services Inc. No.11, Wugong 6th Rd., Wugu Dist., New Taipei City 24891, Taiwan / 新北市五股區五工六路11號 程智科技股份有限公司 t (8862) 22999720 f (8862) 22981882 www.ccsrf.com Member of SGS Group FCC ID: P4Q-N635A Page: 1 / 105 Report No.: T191105W01-SF Rev.: 00 FCC TEST REPORT For Chiron pro Model Name: N635 Issued to Mitac Digital Technology Corporation No.200, Wen Hwa 2nd Rd.,Kuei Shan Dist. Taoyuan, 33383 Taiwan Issued by Compliance Certification Services Inc. Wugu Lab No.11, Wugong 6th Rd., Wugu Dist., New Taipei City 24891, Taiwan. (R.O.C.) Issued Date: 2020/1/17 Statements of Conformity Determination of compliance is based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. Note: This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF, A2LA, NIST or any government agencies. The test results in the report only apply to the tested sample. This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Compliance Certification Services Inc. No.11, Wugong 6th Rd., Wugu Dist., New Taipei City 24891, Taiwan / 新北市五股區五工六路11號 程智科技股份有限公司 t (8862) 22999720 f (8862) 22981882 www.ccsrf.com Member of SGS Group Page 2 / 105 Report No.: T191105W01-SF Rev. 00 Revision History Rev. Issue Date Revisions Effect Page Revised By 00 2020/1/17 Initial Issue ALL Edison Hu This document cannot be reproduced except in full, without prior written approval of the Company. 本報告未經本公司書面許可，不可部份複製。 Compliance Certification Services Inc. No.11, Wugong 6th Rd., Wugu Dist., New Taipei City 24891, Taiwan / 新北市五股區五工六路11號 程智科技股份有限公司 t (8862) 22999720 f (8862) 22981882 www.ccsrf.com Member of SGS Group Page 3 / 105 Report No.: T191105W01-SF Rev. 00 Table of Contents 1 CERTIFICATE OF COMPLIANCE (SAR EVALUATION) .................................................... 5 2 DESCRIPTION OF EQUIPMENT UNDER TEST ............................................................... 6 2.1 SUMMARY OF HIGHEST SAR VALUES .............................................................................................................. 7 3 REQUIREMENTS FOR COMPLIANCE TESTING DEFINED ............................................... 8 3.1 REQUIREMENTS FOR COMPLIANCE TESTING DEFINED BY THE FCC .......................................................... 8 4 DOSIMETRIC ASSESSMENT SYSTEM .......................................................................... 9 4.1 MEASUREMENT SYSTEM DIAGRAM .............................................................................................................. 10 4.2 SYSTEM COMPONENTS ................................................................................................................................... 11 5 EVALUATION PROCEDURES .................................................................................... 14 6 SAR MEASUREMENT PROCEDURES ......................................................................... 16 6.1 NORMAL SAR TEST PROCEDURE .................................................................................................................... 16 7 MEASUREMENT UNCERTAINTY .............................................................................. 18 8 ANTENNA LOCATION ............................................................................................. 19 9 PROXIMITY SENSOR STATUS TABLE OF TRIGGERING DISTANCE ................................ 20 10 SUMMARY OF SAR TEST EXCLUSION CONFIGURATIONS ........................................... 24 10.1 STANDALONE SAR TEST EXCLUSION CALCULATIONS ................................................................................. 24 10.1.1 SAR EXCLUSION CALCULATIONS FOR WI-FI ANTENNA < 50MM FROM THE USER ................................ 25 10.1.2 SAR EXCLUSION CALCULATIONS FOR WI-FI ANTENNA > 50MM FROM THE USER ................................ 26 10.1.3 SAR REQUIRED TEST CONFIGURATION ......................................................................................................... 27 11 EXPOSURE LIMIT ................................................................................................... 28 12 TISSUE DIELECTRIC PROPERTIES ............................................................................. 29 12.1 TEST LIQUID CONFIRMATION ......................................................................................................................... 29 12.2 TYPICAL COMPOSITION OF INGREDIENTS FOR LIQUID TISSUE PHANTOMS ........................................... 30 12.3 SIMU…

Text truncated - open the document above for the full version.

Date: 2019/12/26 Dipole 750 MHz_SN:1015 Communication System: CW; Frequency: 750 MHz; Duty Cycle: 1:1 Medium parameters used: f = 750 MHz; σ = 0.896 S/m; ε r = 41.916; ρ = 1000 kg/m 3 Phantom section: Flat Section Ambient temperature: 22.2°C; Liquid temperature: 21.5°C DASY5 Configuration: • Probe: EX3DV4 - SN3770; ConvF(9.68, 9.68, 9.68); Calibrated: 2019/4/29 • Sensor-Surface: 2mm (Mechanical Surface Detection) • Electronics: DAE4 Sn558; Calibrated: 2019/10/11 • Phantom: ELI • DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Pin=250mW/Area Scan (41x141x1): Interpolated grid: dx=15 mm, dy=15 mm Maximum value of SAR (interpolated) = 2.59 W/kg Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 53.48 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 3.11 W/kg SAR(1 g) = 2.09 W/kg; SAR(10 g) = 1.4 W/kg Maximum value of SAR (measured) = 2.64 W/kg 0 dB = 2.64 W/kg = 4.22 dBW/kg Date: 2019/12/27 Dipole 750 MHz_SN:1015 Communication System: CW; Frequency: 750 MHz; Duty Cycle: 1:1 Medium parameters used: f = 750 MHz; σ = 0.909 S/m; ε r = 42.981; ρ = 1000 kg/m 3 Phantom section: Flat Section Ambient temperature: 22.6°C; Liquid temperature: 21.8°C DASY5 Configuration: • Probe: EX3DV4 – SN3770; ConvF(9.68, 9.68, 9.68); Calibrated: 2019/4/29 • Sensor-Surface: 2mm (Mechanical Surface Detection) • Electronics: DAE4 Sn558; Calibrated: 2019/10/11 • Phantom: ELI • DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Pin=250mW/Area Scan (41x141x1): Interpolated grid: dx=15 mm, dy=15 mm Maximum value of SAR (interpolated) = 2.63 W/kg Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 53.85 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 3.16 W/kg SAR(1 g) = 2.12 W/kg; SAR(10 g) = 1.42 W/kg Maximum value of SAR (measured) = 2.68 W/kg 0 dB = 2.68 W/kg = 4.28 dBW/kg Date: 2019/12/25 Dipole 835 MHz_SN:4d063 Communication System: CW; Frequency: 835 MHz; Duty Cycle: 1:1 Medium parameters used: f = 835 MHz; σ = 0.897 S/m; ε r = 43.158; ρ = 1000 kg/m 3 Phantom section: Flat Section Ambient temperature: 22.7°C; Liquid temperature: 22.0°C DASY5 Configuration: • Probe: EX3DV4 - SN3770; ConvF(9.44, 9.44, 9.44); Calibrated: 2019/4/29 • Sensor-Surface: 2mm (Mechanical Surface Detection) • Electronics: DAE4 Sn558; Calibrated: 2019/10/11 • Phantom: ELI • DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Pin=250mW/Area Scan (41x121x1): Interpolated grid: dx=15 mm, dy=15 mm Maximum value of SAR (interpolated) = 2.89 W/kg Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 57.59 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 3.42 W/kg SAR(1 g) = 2.3 W/kg; SAR(10 g) = 1.52 W/kg Maximum value of SAR (measured) = 2.92 W/kg 0 dB = 2.92 W/kg = 4.65 dBW/kg Date: 2019/12/24 Dipole 1750 MHz_SN:1008 Communication System: CW; Frequency: 1750 MHz; Duty Cycle: 1:1 Medium parameters used: f = 1750 MHz; σ = 1.339 S/m; ε r = 39.343; ρ = 1000 kg/m 3 Phantom section: Flat Section Ambient temperature: 21.1°C; Liquid temperature: 20.5°C DASY5 Configuration: • Probe: EX3DV4 – SN3770; ConvF(8.44, 8.44, 8.44); Calibrated: 2019/4/29 • Sensor-Surface: 2mm (Mechanical Surface Detection) • Electronics: DAE4 Sn558; Calibrated: 2019/10/11 • Phantom: ELI • DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=15 mm, dy=15 mm Maximum value of SAR (interpolated) = 11.8 W/kg Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 92.90 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 14.9 W/kg SAR(1 g) = 8.45 W/kg; SAR(10 g) = 4.54 W/kg Maximum value of SAR (measured) = 11.9 W/kg 0 dB = 11.9 W/kg = 10.76 dBW/kg Date: 2019/12/23 Dipole 1900 MHz_SN:5d173 Communication System: CW; Frequency: 1900 MHz; Duty Cycle: 1:1 Medium parameters used: f = 1900 MHz; σ = 1.466 S/m; ε r = 38.83; ρ = 1000 kg/m 3 Phantom section: Flat Section Ambient temperature: 22.9°C; Liquid temperature: 22.3°C DASY5 Configuration: • Probe: EX3DV4 - SN3770; ConvF(8.23., 8.23, 8.23); Calibrated: 2019/4/29 • Sensor-Surface: 2mm (Mechanical Surface Detection) • Electronics: DAE4 Sn558; Calibrated: 2019/10/11 • Phantom: ELI • DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=15 mm, dy=15 mm Maximum value of SAR (interpolated) = 14.6 W/kg Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 99.77 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 18.5 W/kg SAR(1 g) = 10.3 W/kg; SAR(10 g) = 5.45 W/kg Maximum value of SAR (measured) = 14.6 W/kg 0 dB = 14.6 W/kg = 11.64 dBW/kg Date: 2019/12/20 Dipole 1900 MHz_SN:5d173 Communication System: CW; Frequency: 1900 MHz; Duty Cycle: 1:1 Medium parameters used: f = 1900 MHz; σ = 1.458 S/m; ε r = 39.16; ρ = 1000 kg/m 3 Phantom section: Flat Section Ambient temperature: 22.0°C; Liquid temperature: 21.6°C DASY5 Configuration: • Probe: EX3DV4 - SN3770; ConvF(8.23., 8.23, 8.23); Calibrated: 2019/4/29 • Sensor-Surface: 2mm (Mechanical Surface Detection) • Electronics: DAE4 Sn558; Calibrated: 2019/10/11 • Phantom: ELI • DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=15 mm, dy=15 mm Maximum value of SAR (interpolated) = 14.2 W/kg Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 98.62 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 18.0 W/kg SAR(1 g) = 10 W/kg; SAR(10 g) = 5.3 W/kg Maximum value of SAR (measured) = 14.2 W/kg 0 dB = 14.2 W/kg = 11.52 dBW/kg Date: 2019/12/18 Dipole 2450 MHz_SN:727 Communication System: UID 10000, CW; Frequency: 2450 MHz; Duty Cycle: 1:1 Medium parameters used: f = 2450 MHz; σ = 1.866 S/m; ε r = 38.539; ρ = 1000 kg/m 3 Phantom section: Flat Section Ambient temperature: 23.2°C; Liquid temperature: 22.8°C DASY5 Configuration: • Probe: EX3DV4 - SN3770; ConvF(7.48, 7.48, 7.48); Calibrated: 2019/4/29 • Sensor-Surface: 2mm (Mechanical Surface …

Text truncated - open the document above for the full version.

Date: 2019/12/20 WCDMA Band II_Body_Back_CH 9400_0mm_Down power Communication System: WCDMA; Frequency: 1880 MHz; Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.446 S/m; ε r = 39.198; ρ = 1000 kg/m 3 Phantom section: Flat Section Ambient temperature: 22.0°C; Liquid temperature: 21.6°C DASY5 Configuration: • Probe: EX3DV4 - SN3770; ConvF(8.23, 8.23, 8.23); Calibrated: 2019/4/29 • Sensor-Surface: 2mm (Mechanical Surface Detection) • Electronics: DAE4 Sn558; Calibrated: 2019/10/11 • Phantom: ELI • DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Area Scan (81x61x1): Interpolated grid: dx=15 mm, dy=15 mm Maximum value of SAR (interpolated) = 1.59 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 4.131 V/m; Power Drift = 0.11 dB Peak SAR (extrapolated) = 2.66 W/kg SAR(1 g) = 1.14 W/kg; SAR(10 g) = 0.598 W/kg Maximum value of SAR (measured) = 1.88 W/kg 0 dB = 1.88 W/kg = 2.74 dBW/kg Date: 2019/12/20 WCDMA Band II_Body_Back_CH 9400_0mm_Down power_Repeat Communication System: WCDMA; Frequency: 1880 MHz; Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.446 S/m; ε r = 39.198; ρ = 1000 kg/m 3 Phantom section: Flat Section Ambient temperature: 22.0°C; Liquid temperature: 21.6°C DASY5 Configuration: • Probe: EX3DV4 - SN3770; ConvF(8.23, 8.23, 8.23); Calibrated: 2019/4/29 • Sensor-Surface: 2mm (Mechanical Surface Detection) • Electronics: DAE4 Sn558; Calibrated: 2019/10/11 • Phantom: ELI • DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Area Scan (61x61x1): Interpolated grid: dx=15 mm, dy=15 mm Maximum value of SAR (interpolated) = 1.30 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 3.680 V/m; Power Drift = 2.06 dB Peak SAR (extrapolated) = 2.39 W/kg SAR(1 g) = 1.12 W/kg; SAR(10 g) = 0.571 W/kg Maximum value of SAR (measured) = 1.60 W/kg 0 dB = 1.60 W/kg = 2.04 dBW/kg Date: 2019/12/24 WCDMA Band IV_Body_Back_CH 1312_0mm_Down power Communication System: WCDMA; Frequency: 1712.4 MHz; Duty Cycle: 1:1 Medium parameters used: f = 1712.4 MHz; σ = 1.306 S/m; ε r = 39.476; ρ = 1000 kg/m 3 Phantom section: Flat Section Ambient temperature: 21.1°C; Liquid temperature: 20.5°C DASY5 Configuration: • Probe: EX3DV4 – SN3770; ConvF(8.44, 8.44, 8.44); Calibrated: 2019/4/29 • Sensor-Surface: 2mm (Mechanical Surface Detection) • Electronics: DAE4 Sn558; Calibrated: 2019/10/11 • Phantom: ELI • DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Area Scan (81x61x1): Interpolated grid: dx=15 mm, dy=15 mm Maximum value of SAR (interpolated) = 0.983 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 7.831 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 1.39 W/kg SAR(1 g) = 0.854 W/kg; SAR(10 g) = 0.490 W/kg Maximum value of SAR (measured) = 1.12 W/kg 0 dB = 1.12 W/kg = 0.49 dBW/kg Date: 2019/12/25 WCDMA Band V_Body_Edge4_CH 4183_0mm Communication System: WCDMA; Frequency: 836.6 MHz; Duty Cycle: 1:1 Medium parameters used: f = 837 MHz; σ = 0.899 S/m; ε r = 43.118; ρ = 1000 kg/m 3 Phantom section: Flat Section Ambient temperature: 22.7°C; Liquid temperature: 22.0°C DASY5 Configuration: • Probe: EX3DV4 - SN3770; ConvF(9.44, 9.44, 9.44); Calibrated: 2019/4/29 • Sensor-Surface: 2mm (Mechanical Surface Detection) • Electronics: DAE4 Sn558; Calibrated: 2019/10/11 • Phantom: ELI ; ; • DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Area Scan (41x61x1): Interpolated grid: dx=15 mm, dy=15 mm Maximum value of SAR (interpolated) = 1.28 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 22.39 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 1.75 W/kg SAR(1 g) = 0.720 W/kg; SAR(10 g) = 0.339 W/kg Maximum value of SAR (measured) = 1.23 W/kg 0 dB = 1.23 W/kg = 0.90 dBW/kg Date: 2019/12/23 LTE Band 2 (20MHz)_Body_Back_CH 18900_QPSK_1-0_10mm_Full Power Communication System: LTE; Frequency: 1880 MHz; Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.448 S/m; ε r = 38.882; ρ = 1000 kg/m 3 Phantom section: Flat Section Ambient temperature: 22.9°C; Liquid temperature: 22.3°C DASY5 Configuration: • Probe: EX3DV4 - SN3770; ConvF(8.23., 8.23, 8.23); Calibrated: 2019/4/29 • Sensor-Surface: 2mm (Mechanical Surface Detection) • Electronics: DAE4 Sn558; Calibrated: 2019/10/11 • Phantom: ELI • DASY52 52.8.8(1222); SEMCAD X 14.6.10(7373) Area Scan (81x61x1): Interpolated grid: dx=15 mm, dy=15 mm Maximum value of SAR (interpolated) = 1.37 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 8.196 V/m; Power Drift = 0.08 dB Peak SAR (extrapolated) = 1.62 W/kg SAR(1 g) = 0.953 W/kg; SAR(10 g) = 0.554 W/kg Maximum value of SAR (measured) = 1.29 W/kg 0 dB = 1.29 W/kg = 1.11 dBW/kg Date: 2019/12/24 LTE Band 4 (20MHz)_Body_Back_CH 20175_QPSK_1-0_0mm_Down Power Communication System: LTE; Frequency: 1732.5 MHz; Duty Cycle: 1:1 Medium parameters used: f = 1732.5 MHz; σ = 1.324 S/m; ε r = 39.402; ρ = 1000 kg/m 3 Phantom section: Flat Section Ambient temperature: 21.1°C; Liquid temperature: 20.5°C DASY5 Configuration: • Probe: EX3DV4 - SN3938; ConvF(8.44, 8.44, 8.44); Calibrated: 2019/4/29 • Sensor-Surface: 2mm (Mechanical Surface Detection) • Electronics: DAE4 Sn558; Calibrated: 2019/10/11 • Phantom: ELI • DASY52 52.8.8(1258); SEMCAD X 14.6.10(7373) Area Scan (81x61x1): Interpolated grid: dx=15 mm, dy=15 mm Maximum value of SAR (interpolated) = 1.15 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 7.421 V/m; Power Drift = 0.15 dB Peak SAR (extrapolated) = 1.35 W/kg SAR(1 g) = 0.802 W/kg; SAR(10 g) = 0.458 W/kg Maximum value of SAR (measured) = 1.08 W/kg 0 dB = 1.08 W/kg = 0.33 dBW/kg Date: 2019/12/25 LTE Band 5 (10MHz)_Body_Edge4_CH 20525_QPSK_1-0_0mm Communication System: LTE; Frequency: 836.5 MHz; Duty Cycle: 1:1 Medium parameters used: f = 836.5 MHz; σ = 0.899 S/m; ε r = 43.11; ρ = 1000 kg/m 3 Phantom section: Flat Section Ambient temperature: 22.7°C; Liquid temperature: 22.0°C DASY5 Configuration: • Probe…

Text truncated - open the document above for the full version.

FCC ID: P4Q-N635A IC: 2420C-N635A Page 1 / 55 Report No.: T191105W01-RP6 Rev. 00 No.11, Wugong 6th Rd., Wugu Dist., New Taipei City 24891, Taiwan / 新北市五股區五工六路11號 t:(886-2) 2299-9720 f:(886-2) 2298-1882 www.sgs.tw www.ccsrf.com FCC 47 CFR PART 22 SUBPART H AND PART 24 SUBPART E & INDUSTRY CANADA RSS-132 & RSS-133 TEST REPORT For TEST REPORT For Chiron pro Model No.: N635 Trade Name: Mitac, Mio, Navman, Magellan Issued to FCC: Mitac Digital Technology Corporation No.200, Wen Hwa 2nd Rd.,Kuei Shan Dist. Taoyuan, 33383 Taiwan IC: MiTAC Digital Technology Corporation No.200, Wenhua 2nd Rd., Guishan Dist. Taoyuan City 333 Taiwan Issued by Compliance Certification Services Inc. Wugu Laboratory No.11, Wugong 6th Rd., Wugu Dist., New Taipei City 24891, Taiwan. (R.O.C.) Issued Date: January 17, 2020 Page 2 / 55 Report No.: T191105W01-RP6 Rev. 00 Revision History Rev. Issue Date Revisions Effect Page Revised By 00 January 17, 2020 Initial Issue ALL Allison Chen Page 3 / 55 Report No.: T191105W01-RP6 Rev. 00 TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION ..................................................................................... 4 2. EUT DESCRIPTION .......................................................................................................... 6 3. TEST METHODOLOGY .................................................................................................... 7 3.1 EUT CONFIGURATION ............................................................................................ 7 3.2 DESCRIPTION OF TEST MODES ........................................................................... 8 4. TEST SUMMERY ............................................................................................................ 10 5. INSTRUMENT CALIBRATION ....................................................................................... 11 5.1 MEASURING INSTRUMENT CALIBRATION ......................................................... 11 5.2 MEASUREMENT EQUIPMENT USED ................................................................... 11 5.3 MEASUREMENT UNCERTAINTY ......................................................................... 12 6. FACILITIES AND ACCREDITATIONS ........................................................................... 13 6.1 FACILITIES ............................................................................................................. 13 6.2 EQUIPMENT ........................................................................................................... 13 7. SETUP OF EQUIPMENT UNDER TEST ........................................................................ 14 7.1 SETUP CONFIGURATION OF EUT ....................................................................... 14 7.2 SUPPORT EQUIPMENT ........................................................................................ 14 8. FCC PART 22 & 24 REQUIREMENTS & INDUSTRY CANADA RSS-1 32 & RSS-133 15 8.1 ERP & EIRP MEASUREMENT ............................................................................... 15 8.2 OCCUPIED BANDWIDTH MEASUREMENT ......................................................... 17 8.3 CONDUCTED BANDEDG MEASUREMENT ......................................................... 22 8.4 PEAK TO AVERAGE RATIO .................................................................................. 25 8.5 CONDUCTED SPURIOUS EMISSIONS ...............…

Text truncated - open the document above for the full version.