P8CT3K-6MTCAS II

Aviation Communication and Survelliance Systems 19810 North 7th Avenue Phoenix, Arizona 85027−4400 U.S.A. 15 DECEMBER 2005 34−43−23 TITLE PAGE T-1 PRINTED IN U.S.A. PUB. NO. 8003529−001REVISION − TCAS 3000 Traffic Alert and Collision Avoidance System System Description and Installation Manual SYSTEM DESCRIPTION AND INSTALLATION MANUAL TCAS 3000 Traffic Alert and Collision Avoidance System Copyright 2005 ACSS All Rights Reserved TITLE PAGE T-2 15 DECEMBER 2005 34−43−23 PROPRIETARY NOTICE This document and the information disclosed herein are proprietary data of ACSS. Neither this document nor the information contained herein shall be used, reproduced, or disclosed to others without the written authorization of ACSS, except to the extent required for installation or maintenance of the recipient’s equipment. NOTICE − FREEDOM OF INFORMATION ACT (5 USC 552) AND DISCLOSURE OF CONFIDENTIAL INFORMATION GENERALLY (18 USC 1905) This document is being furnished in confidence by ACSS. The information disclosed herein falls within exemption (b) (4) of 5 USC 552 and the prohibitions of 18 USC 1905. S2005 ACSS is a U.S. registered trademark. All other marks are owned by their respective companies. SYSTEM DESCRIPTION AND INSTALLATION MANUAL TCAS 3000 Traffic Alert and Collision Avoidance System 34−43−23 Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document. Page RR−1 15 Dec 2005 RECORD OF REVISIONS For each revision, put the revised pages in your manual and discard the superseded pages. Write the revision number and date, date put in manual, and the incorporator’s initials in the applicable columns on the Record of Revisions. The initial A shows ACSS is the incorporator. Revision Number Revision DateDate Put in ManualBy SYSTEM DESCRIPTION AND INSTALLATION MANUAL TCAS 3000 Traffic Alert and Collision Avoidance System 34−43−23 Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document. Page RR−2 15 Dec 2005 Blank Page SYSTEM DESCRIPTION AND INSTALLATION MANUAL TCAS 3000 Traffic Alert and Collision Avoidance System 34−43−23 Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document. Page RTR−1 15 Dec 2005 RECORD OF TEMPORARY REVISIONS Read the location instructions on each temporary revision page to know where to put the pages in your manual. Remove temporary revision pages only when discard instructions are given. For each temporary revision, give the correct data in the applicable columns. Temporary Revision No. Temporary Revision Date Date Put in Manual By * Date Removed from Manual By * * The initial A in this column shows ACSS has done the task. SYSTEM DESCRIPTION AND INSTALLATION MANUAL TCAS 3000 Traffic Alert and Collision Avoidance System 34−43−23 Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document. Page RTR−2 15 Dec 2005 Blank Page SYSTEM DESCRIPTION AND INSTALLATION MANUAL TCAS 3000 Traffic Alert and Collision Avoidance System 34−43−23 Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document. Page SBL−1/(Page SBL−2 blank) 15 Dec 2005 SERVICE BULLETIN LIST Service Bulletin Identified Mod Date Included in this Manual Description SYSTEM DESCRIPTION AND INSTALLATION MANUAL TCAS 3000 Traffic Alert and Collision Avoidance System 34−43−23 Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document. Page LEP−1 15 Dec 2005 LIST OF EFFECTIVE PAGES Original−. . 15 Dec 2005 Subheading and Page RevisionSubheading and Page RevisionSubheading and Page Revision Title T−1− T−2− Record of Revisions RR−1− RR−2− Record of Temporary Revisions RTR−1− RTR−2− Service Bulletin List SBL−1− SBL−2− List of Effective Pages LEP−1− LEP−2− LEP−3− LEP−4− Table of Contents TC−1− TC−2− TC−3− TC−4− TC−5− TC−6− TC−7− TC−8− TC−9− TC−10− Introduction INTRO−1− INTRO− 2− INTRO−3− INTRO−4− INTRO−5− INTRO−6− System Description 1−1− 1−2− 1−3− 1−4− 1−5− 1−6− 1−7− 1−8− 1−9− 1−10− 1−11− 1−12− 1−13− 1−14− F 1−15/1−16− 1−17− 1−18− 1−19− 1−20− 1−21− 1−22− 1−23− 1−24− 1−25− 1−26− 1−27− 1−28− Hindicates changed, added, or deleted page. Findicates right foldout page with blank back. SYSTEM DESCRIPTION AND INSTALLATION MANUAL TCAS 3000 Traffic Alert and Collision Avoidance System 34−43−23 Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document. Page LEP−2 15 Dec 2005 1−29− 1−30− 1−31− 1−32− 1−33− 1−34− 1−35− 1−36− 1−37− 1−38− 1−39− 1−40− 1−41− 1−42− 1−43− 1−44− 1−45− 1−46− 1−47− 1−48− 1−49− 1−50− 1−51− 1−52− 1 −53− 1−54− 1−55− 1−56− 1−57− 1−58− 1−59− 1−60− 1−61− 1−62− 1−63− 1−64− Mechanical Installation 2−1− 2−2− 2−3− 2−4− 2−5− 2−6− F 2−7/2−8− F 2−9/2−10− F 2−11/2−12− F 2−13/2−14− F 2−15/2−16 − F 2−17/2−18− 2−19− 2−20− F 2−21/2−22− F 2−23/2−24− F 2−25/2−26− F 2−27/2−28− F 2−29/2−30− F 2−31/2−32− F 2−33/2−34− F 2−35/2−36− F 2−37/2−38− F 2−39/2−40− F 2−41/2−42− F 2−43/2−44− F 2−45/2−46− F 2−47/2−48− F 2− 49/2−50− F 2−51/2−52− F 2−53/2−54− F 2−55/2−56− Electrical Installation 3−1− 3−2− F 3−3/3−4− F 3−5/3−6− F 3−7/3−8− F 3−9/3−10− F 3−11/3−12− F 3−13/3−14− F 3−15/3−16− 3−17− 3−18− 3−19− 3−20− 3−21− Subheading and Page RevisionSubheading and Page RevisionSubheading and Page Revision SYSTEM DESCRIPTION AND INSTALLATION MANUAL TCAS 3000 Traffic Alert and Collision Avoidance System 34−43−23 Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document. Page LEP−3 15 Dec 2005 3−22− 3−23− 3−24− 3−25− 3−26− 3−27− 3−28− 3−29− 3−30− 3−31− 3−32− 3−33− 3−34− 3−35− 3−36− 3−37− 3−38− 3−39− 3−40− 3−41− 3−42− 3−43− 3−44− 3−45− 3 −46− 3−47− 3−48− 3−49− 3−50− 3−51− 3−52− 3−53− 3−54− 3−55− 3−56− 3−57− 3−58− Loading/Gradient Specifications 4−1− 4−2− 4−3− 4−4− 4−5− 4−6− 4−7− 4−8− 4…

Text truncated - open the document above for the full version.

October 22, 2006 Mr. Richard Fabina, Chief Federal Communications Commission Equipment Approval Services P. O. Box 358315 Pittsburgh, PA 15251-5315 Subject: Application for Certification, ACSS TCAS 3000 part number 9003000-10001 Traffic Collision Avoidance System (TCAS) Dear Mr. Fabina: As required by FCC Rules and Regulations Volume II, Part 2, Subpart J, and Volume V, Part 87, Subpart A, Certification is requested for ACSS TCAS 3000 part number 9003000-10001 Traffic Collision Avoidance System (TCAS). ACSS drawing 9000299 shows the “FCC ID” identification and included in the FCC Certification Report are photos showing the location of these nameplates. Included with this request is the FCC Certification Report for TCAS 3000, to include photographs, technical circuitry descriptions with block and schematic diagrams, and user/installation instructions. A letter of “Intent to File for FCC Certification” for the TCAS 3000 has been sent to the applicable Federal Aviation Administration Office, and included with this application as required by Part 87, Paragraph 87.147(d3). Your favorable consideration of this application will be appreciated. Sincerely, _______________________ Stacey Rowlan TCAS Engineering Manager Documents Uploaded: See Sheet 2. Aviation Communication & Surveillance Systems 19810 North 7 th Ave Phoenix, AZ 85027-4400 (623) 445-7000 Fax: (623) 445-7001 Documents Enclosed 1. ACSS letter of intent to file for FAA Certification dated April 13, 2006. 2. FCC Compliance Report for TCAS 3000, ACSS Drawing 8002224-001, Rev -. • Test Report Data • Functions of Semiconductors • Circuit Descriptions • Equipment Photographs 3. ACSS Acceptance Test Procedures for TCAS 3000, ACSS Drawing No. 8002217-001 Rev D. 4. ACSS TCAS3000 Test Requirements Document, ACSS Drawing No. 8002216-001, Rev C 5. TCAS3000 Block Diagrams. 6. TCAS 3000 End Item Assembly Drawing, ACSS Drawing No. 9003000-10001, Rev G. 7. TCAS 3000 Assembly 6MCU Drawing, ACSS Drawing No. 9003000-10, Rev C. 8. TCAS3000 Circuit Card Assembly - A1 Interconnect, ACSS Drawing No. 9003010-002, Rev -. 9. TCAS3000 Circuit Card Assembly - A2 TCAS Processor, ACSS Drawing No. 9003020-003, Rev D. 10. TCAS3000 Circuit Card Assembly - A3 TCAS Transmitter Assembly, ACSS Drawing No. 7517935-903, Rev -. 11. TCAS3000 Circuit Card Assembly - A3A2 TCAS Transmitter CCA, ACSS Drawing No. 7517935- 912, Rev A. 12. TCAS3000 Circuit Card Assembly - A4 Power Supply, Drawing No. 9003030-002, Rev E. 13. TCAS3000 Circuit Card Assembly - A5 TCAS Receiver I/O, Drawing No. 7517945-905, Rev B. 14. Outline and Installation of TCAS3000 6MCU (AC/DC), ACSS Drawing No. 9003001-003, Rev A. 15. Labels for TCAS 3000, ACSS Drawing No. 9000299 Rev K 16. TCAS 3000 System Description and Installation Manual, ACSS Drawing No. 8003529-001 Rev -.

Internal and external photos are contained in FCC Compliance Report, ACSS document No. 8002224-001, Rev -.

Aviation Communication and Surveillance Systems Labels for T2CAS/APM and TCAS 3000 CAGE Code 1WYD3 Initial Release Date 04-FEB-03 Revision Date 16-JAN-06 Document Number 9000299 Revision K Proprietary Notice This document and the information disclosed herein are proprietary data of Aviation Communication & Surveillance Systems LLC. Neither this document nor the information contained herein “shall” be reproduced, used, or disclosed to others without the written authorization of Aviation Communication & Surveillance Systems, LLC. Notice Freedom of Information Act (5 USC 552) and Disclosure of Confidential Information Generally (18 USC 1905) This document is being furnished in confidence by Aviation Communication & Surveillance Systems, LLC. The information disclosed herein falls within exemption (b) (4) of 5 USC 552 and the prohibitions of 18 USC 1905. Copyright 2006 Aviation Communication & Surveillance Systems, LLC. All Rights Reserved. Document Number 9000299 Labels for T2CAS/APM and TCAS 3000 Revision K ACSS Proprietary Use or disclosure of the information on this sheet is subject to the proprietary notice on the title page. Page 2 Table of Contents REQUIREMENTS................................................................................................................. 3 1.1. Material ......................................................................................................................................................... 3 1.2. Background ................................................................................................................................................... 3 1.2.1. Metallized Polyester..................................................................................................3 1.3. Characters and Lines..................................................................................................................................... 3 1.3.1. Black, Thermal Printed ..............................................................................................3 1.4. Label Construction ........................................................................................................................................ 3 1.5. Dimensional Units and Tolerances ................................................................................................................ 3 REFERENCE DOCUMENTS ............................................................................................... 3 FIGURES AND TABLES: .................................................................................................... 4 T2CAS 6 MCU Label ....................................................................................................4 APM Label ....................................................................................................................5 T2CAS 4 MCU (No GPS or 115VAC) Label.................................................................6 T2CAS 4 MCU (No GPS or 115VAC) ..........................................................................7 T2CAS 6 MCU No GPS Label ......................................................................................8 T2CAS 6 MCU With GPS Label ...................................................................................9 T2CAS 4 MCU (No GPS or 115VAC) ........................................................................10 T2CAS 6 MCU No GPS Label ....................................................................................11 Generic T2CAS 6 MCU Label.....................................................................................12 Generic T2CAS 4 MCU (No GPS or 115VAC) Label..................................................13 T2CAS Software Tear-off Label ..................................................................................14 T2CAS 6MCU No GPS Label .....................................................................................15 T2CAS 6 MCU With GPS Label .................................................................................16 T2CAS 4 MCU Label ..................................................................................................17 TCAS 3000 6 MCU Label ...........................................................................................18 TCAS 3000 4 MCU (28 VDC)....................................................................................19 TCAS 3000 4 MCU (28 VDC/115 VDC).....................................................................20 TCAS 3000 Software Tear-off Label ...........................................................................21 Nomenclature Plate Configuration Table .....................................................................22 Label Field Entries Table .............................................................................................22 REVISION HISTORY.......................................................................................................... 24 END OF DOCUMENT ........................................................................................................ 24 Document Number 9000299 Labels for T2CAS/APM and TCAS 3000 Revision K ACSS Proprietary Use or disclosure of the information on this sheet is subject to the proprietary notice on the title page. Page 3 Requirements 1.1. MATERIAL BRADY MATERIAL: MATTE METALLIZED POLYESTER (B-428) ADHESIVE BACKED OR EQUIVALENT. 1.2. BACKGROUND 1.2.1. METALLIZED POLYESTER 1.3. CHARACTERS AND LINES 1.3.1. BLACK, THERMAL PRINTED 1.4. LABEL CONSTRUCTION LABELS ARE CONSTRUCTED OF COMPUTER GENERATED/COMPUTER PRINTED ADHESIVE BACKED METALLIZED POLYESTER. 1.5. DIMENSIONAL UNITS AND TOLERANCES UNLESS OTHERWISE SPECIFIED, ALL DIMENSIONS ARE IN INCHES AND TOLERANCES APPLY AS FOLLOWS: 2 PLACE DECIMAL ±0.02, 3 PLACE DECIMAL ±0.005. Reference Documents None Document Number 9000299 Labels for T2CAS/APM and TCAS 3000 Revision K ACSS Proprietary Use or disclosure of the information on this sheet is subject to the proprietary…

Text truncated - open the document above for the full version.

Document Number 9000299 Labels for T2CAS/APM and TCAS 3000 Revision K ACSS Proprietary Use or disclosure of the information on this sheet is subject to the proprietary notice on the title page. Page 18 TCAS 3000 6 MCU Label Note: Background color (Metallized Polyester) 1.2.1, Character and Line (Black) 1.3.1 Weight, Date, Inspector #, serial number, Environmental Categories, TSOs and PNR dash number all added at time of printing. Bar codes will change appearance depending on the information coded. Refer to Table 2 for contents of line 1, line 2, line 3, and line 4. Figure 15 Part Number 9000299-017 Document Number 9000299 Labels for T2CAS/APM and TCAS 3000 Revision K ACSS Proprietary Use or disclosure of the information on this sheet is subject to the proprietary notice on the title page. Page 19 TCAS 3000 4 MCU (28 VDC) Note: Background color (Metallized Polyester) 1.2.1, Character and Line (Black) 1.3.1 Weight, Date, Inspector #, serial number, Environmental Categories, TSOs and PNR dash number all added at time of printing. Bar codes will change appearance depending on the information coded. Refer to Table 2 for contents of line 1, line 2, line 3, and line 4. Figure 16 Part Number 9000299-018 Document Number 9000299 Labels for T2CAS/APM and TCAS 3000 Revision K ACSS Proprietary Use or disclosure of the information on this sheet is subject to the proprietary notice on the title page. Page 20 TCAS 3000 4 MCU (28 VDC/115 VDC) Note: Background color (Metallized Polyester) 1.2.1, Character and Line (Black) 1.3.1 Weight, Date, Inspector #, serial number, Environmental Categories, TSOs and PNR dash number all added at time of printing. Bar codes will change appearance depending on the information coded. Refer to Table 2 for contents of line 1, line 2, line 3, and line 4. Figure 17 Part Number 9000299-019 Document Number 9000299 Labels for T2CAS/APM and TCAS 3000 Revision K ACSS Proprietary Use or disclosure of the information on this sheet is subject to the proprietary notice on the title page. Page 21 TCAS 3000 Software Tear-off Label Note: Background color (Metallized Polyester) 1.2.1, Character and Line (Black) 1.3.1. PNR dash number, Environmental Categories and TSOs all added at time of printing. Bar codes will change appearance depending on the information coded. Refer to Table 1 for contents of line 1, line 2 and line 3. Figure 18 Part Number 9000299-020 Document Number 9000299 Labels for T2CAS/APM and TCAS 3000 Revision K ACSS Proprietary Use or disclosure of the information on this sheet is subject to the proprietary notice on the title page. Page 22 Nomenclature Plate Configuration Table ACSS S/W Label Uses Line 1 (Dash Number) Line 2 (TSO Categories) Line 3 (TSO Categories) TAWS S/W MOD TCAS S/W MOD 9000299-030 9000299-013 (Figure 11) -10003 TSO C119b W /DEV to DO- 160D (See installation manual for detail) TSO C151b JTSO C119b JTSO C151b A None 9000299-031 9000299-013 (Figure 11) -20003 TSO C119b W /DEV to DO- 160D (See installation manual for detail) TSO C151b TSO C129a JTSO C119b JTSO C151b A None 9000299-032 9000299-013 (Figure 11) -55003 TSO C119b W /DEV to DO- 160D (See installation manual for detail) TSO C151b JTSO C119b JTSO C151b A None 9000299-033 9000299-013 (Figure 11) -10003 TSO C119b W /DEV to DO- 160D (See installation manual for detail) TSO C151b A None 9000299-034 9000299-013 (Figure 11) -20003 TSO C119b W /DEV to DO- 160D (See installation manual for detail) TSO C151b TSO C129a A None 9000299-035 9000299-013 (Figure 11) -55003 TSO C119b W /DEV to DO- 160D (See installation manual for detail) TSO C151b A None 9000299-036 9000299-013 (Figure 11) -10004 TSO C119b, TSO C151b W /Dev (See installation manual for details) None None 9000299-037 9000299-013 (Figure 11) -20004 TSO C119b, TSO C151b, TSO C129a W /Dev (See installation manual for details) None None 9000299-038 9000299-013 (Figure 11) -55004 TSO C119b, TSO C151b W /Dev (See installation manual for details) None None 9000299-039 9000299-020 (Figure 18) -10001 TSO C119b W /Dev (See installation manual for details) None None 9000299-040 9000299-020 (Figure 18) -55001 TSO C119b W /Dev (See installation manual for details) None None 9000299-041 9000299-020 (Figure 18) -65001 TSO C119b W /Dev (See installation manual for details) None None 9000299-042 Reserved 9000299-043 Reserved 9000299-044 Reserved 9000299-045 Reserved 9000299-046 Reserved Table 1 Nomenclature Plates – The software labels for field updates Label Field Entries Table Document Number 9000299 Labels for T2CAS/APM and TCAS 3000 Revision K ACSS Proprietary Use or disclosure of the information on this sheet is subject to the proprietary notice on the title page. Page 23 LRU Part No. Label Part No. Fig. # Line 1 Line 2 Line 3 Line 4 Comments 9000000-10003 9000299-011 9 Applicable S/N DO-160D Env. Cat. (W /DEV)[(A2(F2)Y]BBB[(HB R)(RB1)(SM)]EXXXXXZ[EB Z]A[EZ]Z[RR.]M[A3E3]XXA 10003 TSO C119b W /DEV to DO-160D (See installation manual for detail) TSO C151b Picture Bus (Cert. 4) 9000000-20003 9000299-011 9 Applicable S/N DO-160D Env. Cat (W /DEV)[(A2(F2)Y]BBB[(HB R)(RB1)(SM)]EXXXXXZ[EB Z]A[EZ]Z[RR]M[A3E3]XXA 20003 TSO C119b W /DEV to DO-160D (See installation manual for detail) TSO C151b TSO C129a Picture Bus (Cert. 4) 9000000-55003 9000299-012 10 Applicable S/N DO-160D Env. Cat (W /DEV)[(A2(F2)X]BBB[(HB R)(RB1)(SM)]EXXXXXZ[BZ] AZZ[RR]M[A3E3]XXA 55003 TSO C119b W /DEV to DO-160D (See installation manual for detail) TSO C151b Picture Bus (Cert. 4) 9003000-10001 9000299-017 15 Applicable S/N DO-160D Env. Cat (W /DEV)[(A2(F2)Y]BBB[(HB R)(RB1)(SM)]EXXXXXZ[EB Z]A[EZ]Z[RR]M[A3J33]XXA 10001 TSO C119b W /DEV to DO-160D (See installation manual for details) NA 9003000-55001 9000299-018 16 Applicable S/N DO-160D Env. Cat (W /DEV)[(A2(F2)X]BBB[(HB R)(RB1)(SM)]EXXXXXZ[BZ] AZZ[RR]M[A3J33]XXA 55001 TSO C119b W /DEV to DO-160D (See installation manual for details) NA 9003000-65001 9000299-019 17 Applicable S/N DO-160D Env. Cat (W /DEV)[(A2(F2)Y]BBB[(HB R)(RB1)(SM)]EXXXXXZ[EB…

Text truncated - open the document above for the full version.

Internal and external photos are contained in FCC Compliance Report, ACSS document No. 8002224-001, Rev -.

Operational descriptions are contained in FCC Compliance Report, ACSS document No. 8002224-001, Rev -.

ID label location is contained in TCAS 3000 End Item Assembly Drawing and FCC compliance Report, ACSS document No. 8002224-001, Rev -.

Aviation Communication and Surveillance Systems ACCEPTANCE TEST PROCEDURE FOR TCAS 3000 CAGE Code 1WYD3 Initial Release Date 01-JUNE-05 Revision Date 01-FEB-06 Document Number 8002217-001 Revision D Proprietary Notice This document and the information disclosed herein are proprietary data of Aviation Communication & Surveillance Systems, LLC. Neither this document nor the information contained herein shall be reproduced, used, or disclosed to others without the written authorization of Aviation Communication & Surveillance Systems, LLC. Notice Freedom of Information Act (5 USC 552) and Disclosure of Confidential Information Generally (18 USC 1905) This document is being furnished in confidence by Aviation Communication & Surveillance Systems, LLC. The information disclosed herein falls within exemption (b) (4) of 5 USC 552 and the prohibitions of 18 USC 1905. Copyright 2005 Aviation Communication & Surveillance Systems, LLC. All Rights Reserved. Doc Number 8002217-001 ACCEPTANCE TEST PROCEDURE FOR TCAS 3000 Revision D ACSS Proprietary Use or disclosure of the information on this sheet is subject to the proprietary notice on the title page. Page 2 Record of Revisions Rev Date Authorization Description of Change - 6/01/05 ECR008688 Initial Release. A 9/15/05 ECR008943 Added Tests B 10/14/05 ECR009052 Added Tests C 12/15/05 ECR009153 Added Tests D 2/01/06 ECR009305 New RF FPGA Doc Number 8002217-001 ACCEPTANCE TEST PROCEDURE FOR TCAS 3000 Revision D ACSS Proprietary Use or disclosure of the information on this sheet is subject to the proprietary notice on the title page. Page 3 Table of Contents 1 INTRODUCTION............................................................................................................................ 4 1.1 Purpose ................................................................................................................................... 4 1.2 Scope ...................................................................................................................................... 4 1.3 References .............................................................................................................................. 4 1.4 Definitions ............................................................................................................................... 4 1.4.1 Acronyms and Abbreviations............................................................................................ 4 2 SYSTEM OVERVIEW.................................................................................................................... 5 3 GENERAL INFORMATION............................................................................................................. 5 3.1 General Requirements............................................................................................................. 5 3.2 General RF Test Requirements............................................................................................... 5 3.3 Power Requirements............................................................................................................... 5 4 TEST EQUIPMENT REQUIREMENTS........................................................................................... 6 4.1 Test Equipment Hardware ....................................................................................................... 6 4.2 Test Equipment Software.........................................................................................................6 4.3 Test Equipment / UUT Interconnect......................................................................................... 6 5 MTS END ITEM TEST.................................................................................................................... 8 5.1 ATP / MTS Test Software Synchronization .............................................................................. 8 5.2 UUT Alignment / Calibration ....................................................................................................8 5.3 Loading of Embedded Test Software....................................................................................... 8 5.3.1 Emulator Loading.............................................................................................................. 8 5.4 MTS End Item Test Initialization .............................................................................................. 8 5.4.1 Test Setup ........................................................................................................................ 8 5.4.2 Compact Flash Loading Of HTS....................................................................................... 9 5.5 MTS End Item Test Execution ................................................................................................. 9 6 BITE LOG FAULT CLEARING...................................................................................................... 10 7 SIMPAN END ITEM TEST............................................................................................................ 11 APPENDIX A ....................................................................................................................................... 12 SOFTWARE / FIRMWARE CONFIGURATION ................................................................................... 12 1 INTRODUCTION.......................................................................................................................... 13 1.1 Purpose ................................................................................................................................. 13 2 SOFTWARE / FIRMWARE CONFIGURATION AND VERIFICATION.......................................... 13 2.1 Initial Test Configuration Software Loading............................................................................ 13 2.2 Final Configuration Software Loading And Verification..............................................…

Text truncated - open the document above for the full version.

12 DESCRIPTION REVI SI ONS REV SH. DWG. NO. COMPUTER GENERATED SEE FIRST SHEET FOR CONTRACTNUMBER. USE OR DISCLOSURE OFINFORMATION ON THIS SHEET ISSUBJECT TO THE RESTRICTIONS ONTHE FIRST SHEET OF THIS DOCUMENT. D CAGE CODE NONE DWG NO. SIZE SHEET REV 1WYD3 A B CD 87654321 A DC B 1 3 4 5 6 7 8 REV ACSS THIS PAGE INTENTIONALLY LEFT BLANK 9003020-003 - 12 - 9003020-003 13 DESCRIPTION REVI SI ONS REV SH. DWG. NO. COMPUTER GENERATED SEE FIRST SHEET FOR CONTRACTNUMBER. USE OR DISCLOSURE OFINFORMATION ON THIS SHEET ISSUBJECT TO THE RESTRICTIONS ONTHE FIRST SHEET OF THIS DOCUMENT. D CAGE CODE NONE DWG NO. SIZE SHEET REV 1WYD3 A B CD 87654321 A DC B 1 3 4 5 6 7 8 REV ACSS THIS PAGE INTENTIONALLY LEFT BLANK 9003020-003 - 13 - 9003020-003 14 DESCRIPTION REVI SI ONS REV SH. DWG. NO. COMPUTER GENERATED SEE FIRST SHEET FOR CONTRACTNUMBER. USE OR DISCLOSURE OFINFORMATION ON THIS SHEET ISSUBJECT TO THE RESTRICTIONS ONTHE FIRST SHEET OF THIS DOCUMENT. D CAGE CODE NONE DWG NO. SIZE SHEET REV 1WYD3 A B CD 87654321 A DC B 1 3 4 5 6 7 8 REV ACSS THIS PAGE INTENTIONALLY LEFT BLANK 9003020-003 - 14 - 9003020-003 15 9003020-003 - 9003020-003 - DESCRIPTION REVI SI ONS REV SH. DWG. NO. COMPUTER GENERATED SEE FIRST SHEET FOR CONTRACTNUMBER. USE OR DISCLOSURE OFINFORMATION ON THIS SHEET ISSUBJECT TO THE RESTRICTIONS ONTHE FIRST SHEET OF THIS DOCUMENT. D CAGE CODE NONE DWG NO. SIZE SHEET REV 1WYD3 A B CD 87654321 A DC B 1 3 4 5 6 7 8 REV ACSS +3.3V S GND POS_15V_FIL NEG_15V_FIL NEG_5V_FIL POS_5V_FIL NEG_15VPOS_15VNEG_5VPOS_5V SHEET 28 Power Supply Filter +5V +5V_FIL -5V -5V_FIL +15V +15V_FIL -15V -15V_FIL S +2.0V +1.2V +2.5V POS_1.2VPOS_2.5V SHEET 29 Core Power Supply POS_3.3VGNDPOS_2.0V 15 SHEET NO. 1 OF 13COMMON PROCESSOR ASSEMBLY - TOPPOWER SUPPLY & FILTERS - TOP VIEW SCL SDA PWR_DOWN_L IO FPGA CS_L RF FPGA CS_L PCI_CLOCK_0 AD[31:0] PERR_LSERR_L STOP_L PAR C/BE_L[3:0] TRDY_LIRDY_LFRAME_LDEVSEL_L FPGA_CNFG_CLK FPGA_RDWR_L IO_PROG_L FPGA_INIT_L FPGA_CNFG_DATA[0:7] TDO_JTAG_JACK CPLD TDO 2 P1 TDITRST_LCOP_HRESET_L RF TDO 2 P2 TDITMSTCK P2 TDO 2 CPLD TDI HBM_DISABLE_LPDL_RS232_RX_1PDL_RS232_RX_2 PDL_RS232_TX_1PDL_RS232_TX_2 EXTERNAL_RS422IN_DIG RS422_TX_ENABLE EXTERNAL_RS422OUT_DIG P2 TDO 2 CPLD TDI CFLASH_RESET CPLD TDO 2 PMC TDI AIR/GROUND_LPDL_LINK_ACFLASH_LINK1_LCFLASH_LINK2_L RF_FPGA_DONEIO_FPGA_DONE PCI_CLOCK_4 TCKRF_FPGA_INT_LIO_FPGA_INT_LPMC_INT_LPDL_ENET_INT_L RF_FPGA_INT_LIO_FPGA_INT_LPMC_INT_LPDL_ENET_INT_L CPLD_INT_L CLOCK_16.552MHZGNT_P1_L REQ_P1_L 3.3V_POWER_RESET_L RF_PROG_L CPLD_TEST_DATA[0:7] REQ_ENET_LREQ_IO_LREQ_RF_LREQ_BRI_LREQ_PMC_L GNT_ENET_L GNT_IO_L GNT_RF_L GNT_BRI_L GNT_PMC_L REQ_P1_L GNT_P1_L RESET_IO_L RESET_RF_L CPLD2IOFPGA_SP2CPLD2IOFPGA_SP1 CPLD2RFFPGA_SP2 TMS AUTO_WRITE IO_BUSYRF_BUSYPCI_CLOCK_6 …

Text truncated - open the document above for the full version.