PHB-IR200U1010704IR Remote Control

User’s Manual PBI FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes or modifications not expressly approved by the grantee of his device could void the user's authority to operate the equipment. Technical Parameters: IR-S1/IR-U1 Transmitter IR-S1 Transmitting Frequency 433.92MHz Transmitting Power FCC Part 15 Compliant Transmitting Antenna Build-in Linear Antenna Modulation ASK Infrared Carrier Frequency 38KHz ± 3KHz Power Supply 12V DC 30mA (typ.) Receiver IR-U1 Receiving Sensitivity -95 dBm Receiving Antenna Build-in Linear Antenna Infrared Carrier Frequency 38KHz ± 1KHz Infrared Valid Distance 3M Power Supply 12V DC 30mA (typ.)

C:\windows\TEMP\probonholdemail.doc TIMCO TIMCOTIMCO TIMCO ENGINEERING INC. 849 NW State Road 45 Newberry, Florida 32669 http://www.timcoengr.com 888.472.2424 F 352.472.2030 email: tei@t imcoengr.com 6 August 2001 FCC SUBJECT: PRO BROADBAND INC. FCC ID: PHB-IR200U1010704 To Whom It May Concern: Initially there was some confusion on our part about the functions of this EUT whiccch the applicant cleared up by stating that this EUT was only used for control purposed, no live data. Sincerely, Sid Sanders

Report No.: 016H004FI Page : 1 of 7 Version : 1.0 Attachment 2 : EUT Detailed Photographs (1) EUT Photo (2) EUT Photo

FCC ID.: PHB-IR200U1010704 Pro Broadband Inc. 9965 Fl.5-1, No.6, Lane 99, Pu-Ding Rd., Hsinchu, 300 Taiwan, R.O.C.TEL: 886-3-573-7585 FAX: 886-3-573-7595 FCC ID The FCC ID Label will be placed on the equipment as shown in the photograph below. IR REMOTE CONTROL Model No.: IR-U1 F F C C C C I I D D : : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. S/N: Made in Taiwan

Report No.: 016H004FI Page : 2 of 7 Version : 1.0 (3) EUT Photo Report No.: 016H004FI Page : 3 of 7 Version : 1.0 (4) EUT Photo Report No.: 016H004FI Page : 4 of 7 Version : 1.0 (5) EUT Photo Report No.: 016H004FI Page : 5 of 7 Version : 1.0 (6) EUT Photo (7) EUT Photo Report No.: 016H004FI Page : 6 of 7 Version : 1.0 (8) EUT Photo (9) EUT Photo Report No.: 016H004FI Page : 7 of 7 Version : 1.0 (10) EUT Photo

Report No. 016H004FI Page : 4 of 23 Version:1.0 1. GENERAL INFORMATION 1.1. EUT Description Product Name : IR REMOTE CONTROL Trade Name : PBI FCC ID. : PHB-IR200U1010704 Model No. : IR-U1 Working Frequency : 433.92MHz Channel Number : 1 Type of Modulation : ASK Operator Selection of Operating Frequency : Manual Switch Power Adapter : DVE, DV-1250 Cable In: Non-shielded, 1.7m Cable In: Non-shielded, 1.6m Note: 1. This device is a 433.9MHz IR REMOTE CONTROL with an Infrared Remote function. 2. These tests were conducted on a sample of the equipment for the purpose of demonstrating compliance with Part 15 Subpart C Paragraph 15.231. 3. This device is a composite device in accordance with Part 15 regulations. The function for the receiver was, measured and made a test report that the report number is 016H004F, certified under verification. 1.2. Operation Description The EUT is a 433.92MHz transmitter. The infrared remote control signal can be transferred to 433.92MHz radio frequency in ASK modulation. The transmission antenna is soldered on the PCB directly. The super generations type receiver was used. An external excitation was used when the test of receiver was performed.

123456 A B C D 654321 Title NumberRevisionSize B Date:5-Jul-2001 Sheet of File:C:\WINDOWS\Desktop\work\Ir-u1-0704.datDrawn By: VT3 MMBT3904 VT2 2SC3838 R1 10K R4 3K C2 5.6 C3 2 123 U1 IRM-8801 C1 0.1uF +5V R3 1M VT1 MMBT3906 Y1 NDR 433MHz L1 * L2 * +12V C4 3 C7 10uF 13 2 VV GND INOUT U3 78L12 +5V +12V C8 0.1uF R11 10 R7 10K D2 LED R10 1K VT5 MMBT3904 D1 ZD6.8 VT4 MMBT3904 R9 470k R2 10K R6 1K R5 100 R8 100 C6 1u D3 BZX5.1 CZ1 R12 1K R13 100 C9 10uF C5 10

Report No.: 016H004FI Page: 1 of 3 Version: 1.0 Attachment 1 : EUT Test Photographs Front View of Conducted Test Back View of Conducted Test Report No.: 016H004FI Page: 2 of 3 Version: 1.0 Front View of Radiated Test Back View of Radiated Test Report No.: 016H004FI Page: 3 of 3 Version: 1.0 Front View of Radiated Test (Horn)