PIYGHP42-21A5RFisher-Price Click Hands-Free Baby Gate

1 TM GHP42 OWNER’S MANUAL 2 TABLE OF CONTENTS 1 BEFORE YOU BEGIN ................................................. 3 2 PARTS .........................................................................4 3 CHECK THE LOCATION FOR THE GATE ................ 5 4 SIZE THE GATE .......................................................... 8 5 ASSEMBLE THE GATE ............................................... 9 6 GATE CLAMP INSTALLATION .................................13 7 GATE FASTENER INSTALLATION ..........................17 8 GATE STAIRWAY INSTALLATION ..........................24 9 REMOTE FASTENER INSTALLATION ....................29 10 REMOTE ADHESIVE INSTALLATION ....................32 11 INSTALL BATTERIES ...............................................34 12 OPERATING THE GATE ...........................................35 13 GATE CLOSURE ALERT SYSTEM ........................... 37 14 TEMPORARY GATE REMOVAL ..............................38 3 Remote requires two AA (LR6) alkaline batteries (included). x2 1,5V AA (LR6) 1,5V AA (LR6) Gate requires three AA (LR6) alkaline batteries (included). x3 BEFORE YOU BEGIN WARNING Children have died or been seriously injured when gates are not securely installed. • ALWAYS install and use gate as directed using all required parts. • STOP using when a child can climb over or dislodge the gate. • NEVER use to keep child away from pool. Keep this instruction sheet for future reference, as it contains important information. Discontinue the use of the gate if it becomes damaged, broken, or disassembled. Adult assembly and setup is required to mount the gate and remote, and install batteries. Tools required for hardware installation: Electric drill, 3 /16"(4,76 mm) drill bit, hammer and Phillips screwdriver (tools not included) Tools required for clamp installation: Phillips screwdriver (not included); and clamp tool (included) Tools recommended, but not included: Pencil, tape measure and level To clean, wipe with a damp cloth. Do not immerse. 4 PARTS 7,6 mm x 25,4 mm Wall Anchor x 8 2 inch Extender 4 inch Extender 6 inch Extender Mounting Brackets RemoteRemote Mount Clamp Tool Clamps Gate Gate Bracket Covers Gate Brackets M3.5 x 15 mm Screw x 10 M4 x 30 mm Screw x 8 5 CHECK THE LOCATION FOR THE GATE Measure the width of the opening where the gate will be installed. The width of the opening should be no less than 30" (76,2 cm) and no greater than 42" (106,7 cm). If using clamps, also measure the thickness of the wall, doorway or newel post. If installing near a stairway, you can use clamps on the newel post and fasteners on the wall. Clamps should not be used on round newel posts. 4⅜ ̋ –6⅜ ̋ The thickness of the wall/doorway/newel post should be no less than 4⅜ ̋ (111,125 mm) and no greater than 6⅜ ̋ (161,925 mm). 6 CHECK THE LOCATION FOR THE GATE If using fasteners to mount, check to see if there is a stud in the wall. When fastening to a stud or if fastening to wood, you should not pre-drill holes or use the wall anchors. Stud Drywall 2 in If attaching at the top of stairs, measure the distance from the first step to the gate. The distance from the first step to the gate should be at least two inches (5,1 cm) or more. 7 It's assembly time! Continue reading or scan to watch a step-by-step assembly & installation video. fisher-price.com/assembly/GHP42 8 SIZE THE GATE This gate fits in openings from 30" (76,2 cm) to 42" (106,7 cm). Use each gate extender alone or in combination. See below! 2 ̋ 5,1 cm 4 ̋ 10,2 cm 6 ̋ 15,2 cm 2 ̋ 2 ̋ 6 ̋ 4 ̋ 6 ̋4 ̋ 6 ̋ 2 ̋4 ̋ 6 ̋ Fits 30 ̋ - 31¼ ̋ (76,2 cm - 79,4 cm) opening Fits 31¼ ̋ - 33¼ ̋ (79,4 cm - 84,5 cm) opening Fits 37¼ ̋ - 39¼ ̋ (94,6 cm - 99,7 cm) opening Fits 33¼ ̋ - 35¼ ̋ (84,5 cm - 89,5 cm) opening Fits 35¼ ̋ - 37¼ ̋ (89,5 cm - 94,6 cm) opening Fits 39¼ ̋ - 41¼ ̋ (99,7 cm - 104,8 cm) opening Fits 41¼ ̋ - 42 ̋ (104,8 cm - 106,7 cm) opening 9 ASSEMBLE THE GATE If necessary, add extenders to fit the opening where the gate will be installed. Refer to page 8 for sizing. 1 Fit the post on the end of the mounting bracket into the slot in the side of the gate. 2 10 ASSEMBLE THE GATE Rotate the mounting bracket down to fit to the side of the gate. 3 4 x 1 M3.5 x 15 mm Screw 11 ASSEMBLE THE GATE 5 6 Fit the post on the end of the mounting bracket into the slot in the side of the gate. Rotate the mounting bracket down to fit to the side of the gate. 12 ASSEMBLE THE GATE 7 If you are using fasteners to install the gate, proceed to page 17. If you are using clamps to install the gate, proceed to page 13. If you are installing near a stairway with a newel post, proceed to page 24. x 1 M3.5 x 15 mm Screw 13 GATE CLAMP INSTALLATION Fit the clamps to the gate brackets. Note: Make sure to fit the longer clamps onto the bottom end of the gate brackets. 1 2 x 8 M3.5 x 15 mm Screw 14 GATE CLAMP INSTALLATION Fit the clamps to the doorway (or wall or newel post). Important: If installing in an opening with a door, make sure the button faces away from the door. Fit the clamps to the doorway (or wall or newel post). Important: If installing in an opening with a door, make sure the button faces away from the door. 3 4 ButtonDoor ButtonDoor 15 GATE CLAMP INSTALLATION Using a level, check that both gate brackets are level. 5 Using the clamp tool, tighten all four clamps so the gate brackets are secure to both sides of the doorway or newel posts. 6 16 7 Slide the gate into the gate brackets. GATE CLAMP INSTALLATION 8 Check to be sure the gate is secure. Push the gate where indicated by the arrows. The gate should remain securely attached. 17 GATE FASTENER INSTALLATION 1 2 Determine where you want to install the gate. Using a tape measure, measure the distance to the end of the wall. x 8 M3.5 x 15 mm Screw 18 GATE FASTENER INSTALLATION 3 Place the gate bracket against the wall with the bottom end on the floor. Using a level, check to be sure the gate bracket is level. 4 Using a pencil, make three marks through the screw holes. 19 GATE FASTENER INSTALL…

Text truncated - open the document above for the full version.

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Mattel Asia Pacific Sourcing Ltd. Address 13/F., South Tower, World Finance Centre, Harbour City, Tsimshatsui,Kowloon 852, Hong Kong Grantee Code PIY FCC ID PIYGHP42-21A5R Authorized Contact Name Joule Mak Contact Email [email protected] Contact Phone 31855000 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date:2020-12-07 Print Name: Joule Mak Title: Director, Electronic Engineering *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

. Date: 2020-12-07 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: PIYGHP42-21A5R To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Keny Xu in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Mattel Asia Pacific Sourcing Ltd. This authorization is valid until further written notice from the applicant. Print Name: Joule Mak Title: Director, Electronic Engineering Signature: On behalf of Company: Mattel Asia Pacific Sourcing Ltd. Telephone: 31855000 E-mail: [email protected]

TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request regarding application for FCC ID: PIYGHP42-21A5R LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Print Name: Joule Mak Title: Director, Electronic Engineering Signature: On behalf of Company: Mattel Asia Pacific Sourcing Ltd. Telephone: 31855000 E-mail: [email protected]

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 4 External Photos for SZEM2012012378CR FCC ID: PIYGHP42-21A5R SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 4 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 4

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 4 Internal Photos for SZEM2012012378CR FCC ID: PIYGHP42-21A5R SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 4 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 4 ANTENNA SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 4

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201201237802 Page: 1 of 38 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZEM2012012378CR Applicant: Mattel Asia Pacific Sourcing Ltd. Address of Applicant: 13/F., South Tower, World Finance Centre, Harbour City, Tsimshatsui, Kowloon, Hong Kong 852 Manufacturer: Mattel Asia Pacific Sourcing Ltd. Address of Manufacturer: 13/F., South Tower, World Finance Centre, Harbour City, Tsimshatsui, Kowloon, HongKong Equipment Under Test (EUT): EUT Name: Fisher-Price® Click™ Hands-Free Baby Gate Model No.: GHP42 GATE Trade Mark: Fisher Price FCC ID: PIYGHP42-21A5R Standard(s) : 47 CFR Part 15, Subpart C 15.249 Date of Receipt: 2020-12-03 Date of Test: 2020-12-04 to 2020-12-21 Date of Issue: 2020-12-21 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201201237802 Page: 2 of 38 Revision Record Version Chapter Date Modifier Remark 01 2020-12-21 Original Authorized for issue by: Peter Geng/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201201237802 Page: 3 of 38 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.249 N/A 47 CFR Part 15, Subpart C 15.203 Pass Radio Spectrum Matter Part Item Standard Method Requirement Result 20dB Bandwidth 47 CFR Part 15, Subpart C 15.249 ANSI C63.10 (2013) Section 6.9 47 CFR Part 15, Subpart C 15.215 Pass Field Strength of the Fundamental Signal (15.249(a)) 47 CFR Part 15, Subpart C 15.249 ANSI C63.10 (2013) Section 6.5&6.6 47 CFR Part 15, Subpart C 15.249(a) Pass Restricted Band Around Fundamental Frequency 47 CFR Part 15, Subpart C 15.249 ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.249(d) & 15.209 Pass Radiated Emissions 47 CFR Part 15, Subpart C 15.249 ANSI C63.10 (2013) Section 6.4&6.5&6.6 47 CFR Part 15, Subpart C 15.209 & 15.249 (a),(d) Pass SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201201237802 Page: 4 of 38 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 TEST SUMMARY ....................................................................................................................................... 3 3 CONTENTS ................................................................................................................................................ 4 4 GENERAL INFORMATION ........................................................................................................................ 5 4.1 DETAILS OF E.U.T. ............................................................................................................................... 5 4.2 DESCRIPTION OF SUPPORT UNITS ......................................................................................................... 5 4.3 MEASUREMENT UNCERTAINTY .............................................................................................................. 5 4.4 TEST LOCATION .................................................................................................................................... 6 4.5 TEST FACILITY ...................................................................................................................................... 6 4.6 DEVIATION FROM STANDARDS ............................................................................................................... 6 4.7 ABNORMALITIES FROM STANDARD CONDITIONS ..................................................................................... 6 5 EQUIPMENT LIST ...................................................................................................................................... 7 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ................................................................................. 9 6.1 ANTENNA REQUIREMENT ...................................................................................................................... 9 6.1.1 Test Requirement: ......................................................................................................................... 9 7 RADIO SPECTRUM MATTER TEST RESULTS ..................................................................................... 10 7.1 20DB BANDWIDTH .............................................................................................................................. 10 7.1.1 E.U.T. Operation .......................................................................................................................... 10 7.1.2 Test Mode Description ................................................................................................................. 10 7.1.3 Test Setup Diagram ..................................................................................................................... 10 7.1.4 Measurement Procedure and Data............................................................................................. 10 7.2 FIELD STRENGTH OF THE FUNDAMENTAL SIGNAL (15.249(A)) ............................................................... 13 7.2.1 E.U.T. Operation .......................................................................................................................... 13 7.2.2 Test Mode Description ................................................................................................................. 13 7.2.3 Test Setup Diagram ..................................................................................................................... 13 7.2.4 Measurement Procedure and Data............................................................................................. 14 7.3 RESTRICTED BAND AROUND F…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 2 Setup Photos for SZEM2012012378CR FCC ID: PIYGHP42-21A5R SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 2 1 Photographs Radiated Emissions