PIYHTP53-23A5RHOT WHEELS BARBIE RC SUV Vehicle

R0000-MA70-G3_21A Play safely! Do not drive the vehicle in the street! • DO NOT pick up the vehicle while in motion. • Keep fingers, hair, and loose clothing away from the wheels while the vehicle is switched ON. • Adult supervision is recommended when this vehicle is being operated. • To avoid accidental operation, remove all batteries from the remote controller when not in use and switch the vehicle OFF before storage. Jouez en toute sécurité ! Ne faites pas fonctionner le véhicule dans la rue. • N’essayez PAS d’attraper le véhicule lorsque celui-ci est en mouvement. • Veillez à ce que les doigts, les cheveux et les vêtements soient éloignés des roues lorsque le véhicule est en MARCHE. • La surveillance d’un adulte est recommandée lors de l’utilisation de ce véhicule. • Pour éviter tout fonctionnement accidentel, retirez toutes les piles de la télécommande lorsqu’elle n’est pas utilisée et éteignez le véhicule avant de le ranger. Sicher spielen! Das Fahrzeug nicht auf Straßen fahren lassen! • Das Fahrzeug NIEMALS hochnehmen, solange es noch in Bewegung ist. • Finger, Haare und lose Kleidung nicht in die Nähe der Räder bringen, während das Fahrzeug EINGESCHALTET ist. • Die Aufsicht eines Erwachsenen ist empfohlen, wenn mit dem Fahrzeug gespielt wird. • Alle Batterien aus der Fernsteuerung herausnehmen und das Fahrzeug AUSSCHALTEN, um unbeabsichtigtes Fahren zu vermeiden. Gioca in modo sicuro! Non usare il veicolo in strada! • NON raccogliere il veicolo quando è in movimento. • Tenere dita, capelli e vestiti lontano dalle ruote quando il veicolo è acceso. • Si consiglia la supervisione di un adulto quando il veicolo è in uso. • Per evitare l'azionamento accidentale, estrarre tutte le pile dal radiocomando quando non in uso e spegnere il veicolo prima di riporlo. Speel veilig! Nooit met dit voertuig op straat rijden! • Voertuig NIET oppakken terwijl het rijdt. • Houd vingers, haar en losse kleding uit de buurt van de wielen wanneer het voertuig AAN staat. • Wij adviseren toezicht van een volwassene wanneer er met dit voertuig wordt gespeeld. • Om te voorkomen dat het voertuig per ongeluk wordt gestart, alle batterijen eruit halen wanneer het niet wordt gebruikt en het voertuig UIT zetten voor het opbergen. ¡Se debe jugar con precaución! No jugar con este vehículo en la calle. • El vehículo NO debe cogerse mientras esté en funcionamiento. • Mantener los dedos, el pelo y la ropa holgada lejos de las ruedas mientras el vehículo está encendido. • Recomendamos que un adulto vigile al niño mientras juega con este vehículo. • Para evitar posibles accidentes, se recomienda sacar todas las pilas del mando de control remoto cuando no se esté utilizando y apagar el vehículo antes de guardarlo. Brincar em segurança! Não utilizar o veículo na estrada! • NÃO levantar o veículo em funcionamento. • Manter os dedos, o cabelo e a roupa longe das rodas quando o veículo estiver ligado. • Recomendamos a supervisão de um adulto quando o veículo está em funcionamento. • Para evitar o acionamento inadvertido, remover todas as pilhas do comando quando não for utilizado e desligar o veículo antes de arrumar. Lek med förstånd! Kör inte med fordonet på gatan! • Lyft INTE upp ett fordon i rörelse. • Håll fingrar, hår och lösa kläder borta från hjulen när fordonet är PÅ. • Vi rekommenderar att leksaken används under vuxens överinseende. • Ta ut alla batterier från ärrkontrollen så att leksaken inte startar av misstag när den inte används och stäng AV fordonet före förvaring. Leiki turvallisesti! Älä leiki ajotiellä! • ÄLÄ nosta liikkuvaa ajoneuvoa käteen. • Pidä sormet, hiukset ja löysät vaatteet poissa renkaiden ulottuvilta, kun ajoneuvoon on kytketty virta. • Ajoneuvoa suositellaan käytettäväksi aikuisen valvonnassa. • Jottei ajoneuvo lähtisi vahingossa käyntiin, irrota paristot kauko-ohjaimesta, kun se ei ole käytössä ja katkaise virta ajoneuvosta säilytystä varten. Sikker leg! Kør ikke med bilen på en trafikeret vej! • Saml IKKE bilen op, mens den er i bevægelse. • Hold fingre, hår og løst tøj væk fra hjulene, når legetøjet er tændt. • Det anbefales, at bilen kun bruges under opsyn af en voksen. • Fjern alle batterier fra ernbetjeningen, når køretøjet ikke bruges, for at undgå, at det starter ved et uheld, og SLUK for køretøjet før opbevaring. Vær forsiktig! Ikke bruk bilen på veien! • IKKE løft opp bilen når den er i bevegelse. • Hold fingre, hår og løstsittende klær unna hjulene på bilen mens den er slått PÅ. • En voksen bør være med når bilen brukes. • Ta ut batteriene når bilen ikke er i bruk, og skru bilen AV for å unngå at bilen beveger seg ved et uhell. Baw się ostrożnie! Nie baw się produktem na ulicy! • Nie podnoś pojazdu, gdy jest w ruchu. • Kiedy pojazd jest włączony, należy trzymać palce, włosy i luźne elementy odzieży z dala od kół. • Zalecany jest nadzór osób dorosłych podczas obsługi pojazdu. • Aby uniknąć przypadkowego uruchomienia, wyjmij wszystkie baterie z kontrolera, gdy nie jest używany, i wyłącz pojazd przed schowaniem. Hrajte si bezpečně! Nejezděte s vozidlem po ulici! • NEZVEDEJTE vozidlo, zatímco se pohybuje. • Během provozu vozidla nepřibližujte prsty, vlasy a volné kusy oblečení ke kolům. • Při provozu vozidla je doporučen dohled dospělé osoby. • Abyste zabránili náhodnému zapnutí, když hračku nepoužíváte, vyjměte všechny baterie z dálkového ovladače a vozidlo vypněte. Pri hre dbajte na bezpečnosť! S autíčkom sa nehraj na ulici! • NEDVÍHAJ pohybujúce sa vozidlo. • Keď je autíčko zapnuté, daj pozor, aby sa ku kolesám nedostali prsty, vlasy alebo voľné kusy oblečenia. • Pri používaní tohto vozidla sa odporúča prítomnosť dospelej osoby. • Aby ste predišli náhodnému spusteniu, keď diaľkový ovládač nepoužívate, vyberte z neho všetky batérie a pred uskladnením vozidlo VYPNITE. Ügyeljen a biztonságra! Ne vezesse a járművet az utcán! • TILOS a mozgó járművet felemelni. • Tartsa távol a kezét, haját és ruházatát a bekapcsolt jármű mozgó kerekeitől. • Ajánlott felnőtt felügyelete mellett működte…

Text truncated - open the document above for the full version.

132 654 Flyer Sheet required: 24S_RC_R0000-3A70_3LA_Battery_Flyer EU DoC (for Europe) AA (LR6) 1.5V x2 AA (LR6) 1.5V x5 E F D 2 T M I 0 1 BOTTOM VIEW VISTA DE ABAJO VUE DE DESSOUS 1. Slide the power switch to ON (I) on the vehicle. 2. Push the remote controller's driving control joystick forward/backward after switching on the vehicle. 3. Pairing is complete when the LED changes from flashing red to solid red on the remote controller. NOTE: If the vehicle does not respond to the remote controller after pairing, switch the vehicle off then back on to try pairing again or replace the batteries on the vehicle and remote controller if the batteries are drained. 1. Pon el interruptor de encendido del vehículo en ENCENDIDO (I). 2. Empuja la palanca de control hacia delante o hacia atrás después de encender el vehículo. 3. El emparejamiento estará listo cuando la luz LED roja deje de parpadear y quede fija en el control remoto. ADVERTENCIA: Si el vehículo no responde al control remoto después del emparejamiento, apaga el vehículo y vuelve a encenderlo para intentar emparejarlo de nuevo o reemplaza las pilas del vehículo y del control remoto si están gastadas. 1. Glisser l’interrupteur Marche/Arrêt du véhicule en position MARCHE (I). 2. Pousser la manette de la télécommande vers l’avant/arrière après avoir mis le véhicule en marche. 3. Le jumelage est terminé quand le voyant à DEL rouge de la télécommande cesse de clignoter et reste allumé. REMARQUE : Si le véhicule ne répond pas à la télécommande après le jumelage, éteindre le véhicule, puis le rallumer pour réessayer le jumelage ou remplacer les piles du véhicule et de la télécommande si elles sont épuisées. 4+ HTP53-3A70-G1_3LA Are the remote controller and vehicle equipped with fresh batteries? Is the remote controller paired with the vehicle? Has the vehicle’s steering been aligned? ¿El control remoto y el vehículo están equipados con pilas nuevas? ¿El control remoto está emparejado con el vehículo? ¿Se alineó la dirección del vehículo? La télécommande et le véhicule sont-ils équipés de piles neuves? La télécommande est-elle jumelée au véhicule? La direction du véhicule a-t-elle été alignée? CHECKLIST • LISTA DE VERIFICACIÓN • LISTE DE VÉRIFICATION CONTROLS • CONTROLES • COMMANDES FITS 30 cm (12 in) BARBIE® DOLLS • APTO PARA MUÑECAS BARBIE® DE 30 cm (12 in) CONVIENT AUX POUPÉES BARBIE® DE 30 cm (12 in) D. DECORATE YOUR VEHICLE • DECORA TU VEHÍCULO • DÉCORATION DU VÉHICULE B. PAIRING THE REMOTE CONTROLLER AND VEHICLE • EMPAREJAMIENTO DEL CONTROL REMOTO Y EL VEHÍCULO • JUMELAGE DE LA TÉLÉCOMMANDE ET DU VÉHICULE C. STEERING ALIGNMENT • ALINEACIÓN DE DIRECCIÓN • ALIGNEMENT DE LA DIRECTION 1. Check the vehicle's steering alignment before playing by driving it forward to see if it is driving straight. 2. If the vehicle automatically steers toward the right/left, turn the steering adjuster dial to the opposite direction and adjust until it runs in a straight line. 1. Revisa la alineación de dirección del vehículo antes de jugar haciéndolo avanzar para ver si se mueve en línea recta. 2. Si el vehículo gira automáticamente hacia la derecha o izquierda, mueve la perilla del ajustador hacia la dirección opuesta y ajústala hasta que el vehículo avance en línea recta. 1. Vérifier l’alignement de la direction du véhicule avant de jouer en le faisant avancer pour voir s’il roule droit. 2. Si le véhicule se dirige automatiquement vers la droite/gauche, tourner le bouton de réglage de la direction dans la direction opposée et ajuster jusqu’à ce que le véhicule roule en ligne droite. 3LA - English / Laam Spanish / Canadian FrenchG1: Updated the unit of Brabie Dolls. A C B 1: CONTENTS • CONTENIDO • CONTENU 4: HOW TO DRIVE • CÓMO CONDUCIR • COMMENT CONDUIRE 3: SET UP (CONTD.) • PREPARACIÓN (CONTINUACIÓN) • PRÉPARATION (SUITE) 3: SET UP • PREPARACIÓN • PRÉPARATION 2: FEATURES • CARACTERÍSTICAS • CARACTÉRISTIQUES FORWARD/BACKWARD AVANZAR/RETROCEDER AVANT/ARRIÈRE LEFT/RIGHT STEERING IZQUIERDA/DERECHA GAUCHE/DROITE SKILL CHECK! • ¡EVALUACIÓN DE HABILIDADES! • VÉRIFICATION DES CONNAISSANCES! Remember, steering directions are flipped on the remote controller when you are driving backward! ¡Recuerda que la dirección se invierte en el control remoto cuando manejas en reversa! Ne pas oublier que les directions de conduite de la télécommande sont inversées quand les déplacements se font à reculons! NOTE: Operating range of the remote controller is up to 30 m (98 ft). ADVERTENCIA: El rango de funcionamiento del control remoto es de hasta 30 m. REMARQUE : La portée de la télécommande est de 30 m (98 pi). ® HTP53-3A70-G1_I/S_3LA Size: 22” x 10” A. BATTERY INSTALLATION • INSTALACIÓN DE PILAS • INSTALLATION DES PILES 1. Unscrew the battery covers on both the vehicle and remote controller with a Phillips head screwdriver (not included). 2. Install 5 AA (LR6) 1.5V alkaline batteries (not included) in the vehicle's battery box. 3. Install 2 AA (LR6) 1.5V alkaline batteries (not included) in the remote controller's battery box. 4. For best performance, use alkaline batteries. 5. Replace both battery covers and tighten screws. 6. Replace batteries in the vehicle and the remote controller if the vehicle begins to run slowly or does not respond. 1. Desatornilla las tapas del compartimiento de pilas del vehículo y del control remoto con un destornillador de cruz (no incluido). 2. Instala 5 pilas alcalinas AA (LR6) de 1,5 V (no incluidas) en el compartimiento de pilas del vehículo. 3. Instala 2 pilas alcalinas AA (LR6) de 1,5 V (no incluidas) en el compartimiento de pilas del control remoto. 4. Para mejores resultados, usa solo pilas alcalinas. 5. Cierra ambas tapas de los compartimientos y aprieta los tornillos. 6. Sustituye las pilas del vehículo y control remoto si el vehículo pierde velocidad o no responde. 1. Dévisser les couvercles des compartiments des piles du véhicule et de la télécommande à l’aide d’un tournevis cruciforme (non fourni), puis retirer les couvercles. 2. Insér…

Text truncated - open the document above for the full version.

Applicant Declaration QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Mattel Asia Pacific Sourcing Ltd. Address 11/F., South Tower, World Finance Centre, Harbour City, Tsimshatsui, Kowloon, Hong Kong Grantee Code PIY FCC ID PIYHTP53-23A5R Authorized Contact Name Joule Mak Contact Email [email protected] Contact Phone 31855000 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applica ble technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept t hat they are the responsible party and agree to abide by t heir responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distrib ution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has r ead, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List [Mattel Asia Pacific Sourcing Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Mattel Asia Pacific Sourcing Ltd.] ( “the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date: 07/10/2023 Print Name: Joule Mak Title: Director, Electronic Engineering *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Date: 0 7/10/2023 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: PIYHTP53-23A5R To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and condi tions for Certification, as specified by SGS North America, Inc., still resides with Mattel Asia Pacific Sourcing Ltd. This authorization is valid until further written notice from the applicant. Sincerely, Print Name: Joule Mak Title: Director, Electronic Engineering Signature: On behalf of Company: Mattel Asia Pacific Sourcing Ltd. Telephone: 31855000 E-mail: [email protected]

To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Regarding: Confidentiality Request regarding application for FCC ID: PIYHTP53-23A5R LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within aforementioned days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Joule Mak Title: Director, Electronic Engineering Signature: On behalf of Company: Mattel Asia Pacific Sourcing Ltd. Telephone: 31855000 E-mail: [email protected]

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 1 of 4 Appendix External Photos for SZCR2306002089AT FCC ID: PIYHTP53-23A5R SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 2 of 4 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 4 of 4 - End of the Appendix -

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 1 of 4 Appendix Internal Photos for SZCR2306002089AT FCC ID: PIYHTP53-23A5R SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 2 of 4 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 4 of 4 - End of the Appendix -

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230600208903 Page: 1 of 10 Keny Xu EMC Laboratory Manager RF Exposure Evaluation Report Application No.: SZCR2306002089AT Applicant: Mattel Asia Pacific Sourcing Ltd. Address of Applicant: 11/F., South Tower, World Finance Centre, Harbour City, Tsimshatsui, Kowloon, 852 Hong Kong Manufacturer: Mattel Asia Pacific Sourcing Ltd. Address of Manufacturer: 11/F., South Tower, World Finance Centre, Harbour City, Tsimshatsui, Kowloon, 852 Hong Kong Equipment Under Test (EUT): EUT Name: HOT WHEELS® BARBIE® RC SUV Vehicle Model No.: HTP53 FCC ID: PIYHTP53-23A5R Standard(s) : FCC Rules 47 CFR §2.1093 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2023-06-30 Date of Evaluation: 2023-06-30 to 2023-07-06 Date of Issue: 2023-07-13 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230600208903 Page: 2 of 10 Revision Record Version Chapter Date Modifier Remark 01 2023-07-13 Original Authorized for issue by: Gebin Sun/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230600208903 Page: 3 of 10 2 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Contents .................................................................................................................................................... 3 3 General Information .................................................................................................................................. 4 3.1 General Description of E.U.T. ............................................................................................................ 4 3.2 Details of E.U.T. ................................................................................................................................. 4 3.3 Separation Distance ........................................................................................................................... 4 3.4 Test Location ...................................................................................................................................... 5 3.5 Test Facility ........................................................................................................................................ 5 3.6 Deviation from Standards ................................................................................................................... 5 3.7 Abnormalities from Standard Conditions ........................................................................................... 5 4 FCC Radiofrequency radiation exposure limits .................................................................................... 6 4.1 Blanket 1 mW Blanket Exemption ...................................................................................................... 6 4.2 MPE-based Exemption ...................................................................................................................... 6 4.3 SAR-based Exemption ....................................................................................................................... 7 5 Measurement and Calculation ............................................................................................................... 10 5.1 Maximum transmit power ................................................................................................................. 10 5.2 RF Exposure Calculation ................................................................................................................. 10 6 EUT Constructional Details (EUT Photos) ........................................................................................... 10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230600208903 Page: 4 of 10 3 General Information 3.1 General Description of E.U.T. Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Power Supply: 7.5V DC(1.5V x 5 "AA" Size Batteries) Operation Frequency: 2420MHz to 2462MHz Modulation Type: GFSK Number of Channels: 43 Channel spacing: 1MHz Antenna Type: Wire Antenna Antenna Gain: 0.58dBi Remark:The information in this section is provided by the applicant or manufacturer, SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. 3.3 Separation Distance Minimum test separation distance: 5mm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230600208903 Page: 5 of 10 3.4 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China. 518057. Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 No tests were sub-contracted. 3.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI (Member No. 1937) The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shi…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230600208902 Page: 1 of 43 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2306002089AT Applicant: Mattel Asia Pacific Sourcing Ltd. Address of Applicant: 11/F., South Tower, World Finance Centre, Harbour City, Tsimshatsui, Kowloon, 852 Hong Kong Manufacturer: Mattel Asia Pacific Sourcing Ltd. Address of Manufacturer: 11/F., South Tower, World Finance Centre, Harbour City, Tsimshatsui, Kowloon, 852 Hong Kong Equipment Under Test (EUT): EUT Name: HOT WHEELS® BARBIE® RC SUV Vehicle Model No.: HTP53 FCC ID: PIYHTP53-23A5R Standard(s) : 47 CFR Part 15, Subpart C 15.249 Date of Receipt: 2023-06-30 Date of Test: 2023-06-30 to 2023-07-06 Date of Issue: 2023-07-13 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230600208902 Page: 2 of 43 Revision Record Version Chapter Date Modifier Remark 01 2023-07-13 Original Authorized for issue by: Gebin Sun/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230600208902 Page: 3 of 43 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.249 N/A 47 CFR Part 15, Subpart C 15.203 Pass Radio Spectrum Matter Part Item Standard Method Requirement Result 20dB Bandwidth 47 CFR Part 15, Subpart C 15.249 ANSI C63.10 (2013) Section 6.9 47 CFR Part 15, Subpart C 15.215 Pass Field Strength of the Fundamental Signal (15.249(a)) ANSI C63.10 (2013) Section 6.5&6.6 47 CFR Part 15, Subpart C 15.249(a) Pass Restricted Band Around Fundamental Frequency ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.249(d) & 15.209 Pass Radiated Emissions Below 1GHz ANSI C63.10 (2013) Section 6.4&6.5 47 CFR Part 15, Subpart C 15.209 & 15.249 (a),(d) Pass Radiated Emissions Above 1GHz ANSI C63.10 (2013) Section 6.6 47 CFR Part 15, Subpart C 15.209 & 15.249 (a),(d) Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230600208902 Page: 4 of 43 3 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Test Summary ........................................................................................................................................... 3 3 Contents .................................................................................................................................................... 4 4 General Information .................................................................................................................................. 6 4.1 Details of E.U.T. ................................................................................................................................. 6 4.2 Description of Support Units .............................................................................................................. 6 4.3 Measurement Uncertainty .................................................................................................................. 6 4.4 Test Location ...................................................................................................................................... 7 4.5 Test Facility ........................................................................................................................................ 7 4.6 Deviation from Standards ................................................................................................................... 7 4.7 Abnormalities from Standard Conditions ........................................................................................... 7 5 Equipment List .......................................................................................................................................... 8 6 Radio Spectrum Technical Requirement ..................................................…

Text truncated - open the document above for the full version.