PIYT7004T1Puppy Tweets

INSTRUCTION SHEET SPECIFICATIONS Toy: Toy No.: Part No.: Trim Size: Folded Size: Type of Fold: # colors: Colors: Paper Stock: Paper Weight: EDM No.: Puppy Tweets T7004 0920 8.5” W x 5.5” H 4.25” W x 2.75” H Height Fold into half One Black White Offset 70 lb. 001 CONTENTS T7005-0920 T7006-0920 1 Puppy Tweets™ Tag 1 USB Dongle To receive instructions on how to get started with Puppy Tweets™, please visit www.puppytweet.com/download and select the appropriate file for your computer’s operating system! INSTRUCTION MANUAL Keep these instructions for future reference as they contain important information. SySTEm REquiREmENTS PC specification Operation System: Windows® XP Windows Vista® Windows® 7 Minimum RAM requirement: 128 MB Required hard disk space: 20 MB CPU: x86 compatible CPU Internet Access Internet Access is required to use this product. Interruption may occur if dog moves outside the maximum range or an obstruction blocks the signal transmission between the dog tag and dongle. BATTERy iNSTRuCTiONS HOW TO REPLACE BATTERIES The proper procedure for installing and replacing the battery is located on the downloaded instructions file @ www.puppytweet.com. Requires 1 - 3V Lithium Battery type: CR2032 (included). Dispose of batteries safely. RANGE – up to 100ft/30m 900 MHz Macintosh® specification Operation System: Mac® X10.5 Minimum RAM requirement: 128 MB Required hard disk space: 20 MB CR2032 x 1 Included Get actual Tweets from your dog! TM RANGE – 100ft/30m 915 MHz T7004 Manual_1L-English P/N 823-XXXXX, Rev.A Date: Mar. 31, 2010 1. COVER T7005_T7006-0920 Instruction Manual_1L-DOM.indd 13/31/10 10:47:42 AM Protect the environment by not disposing of this product with household waste (2002/96/EC). Check your local authority for recycling advice and facilities. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. • This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. NOTE: Changes or modifications not expressively approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment. BATTERy SAFETy iNFORmATiON In exceptional circumstances batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage: • Non-rechargeable batteries are not to be recharged. • Rechargeable batteries are to be removed from the product before being charged (if designed to be removable). • Rechargeable batteries are only to be charged under adult supervision (if designed to be removable). • Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries. • Do not mix old and new batteries. • Only batteries of the same or equivalent type as recommended are to be used. • Batteries are to be inserted with the correct polarity. • Exhausted batteries are to be removed from the product. • The supply terminals are not to be short-circuited. • Dispose of batteries safely. • Do not dispose of this product in a fire. The batteries inside may explode or leak. © 2010 Mattel, Inc. All Rights Reserved. RADICA USA Ltd. www.radicagames.com Helpline 1.800.803.9611 or service.mattel.com. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. T7005_T7006-0920 Instruction Manual_1L-DOM.indd 23/31/10 10:47:43 AM

Model: T7004 FCC ID: PIYT7004T1 Block diagram of Dog Tag: 3.0V Batter VCC 10R 440uF GND I/O (Power On/Off) I/O (Input) I/O (Input) W588DF20/W588D003 MRF49XA 900MHz RF Transceiver MCU VCC ANT MIC AMP Ball Sensor GND GND VCC VCC I/Os I/Os 32768Hz 10MHz .

INTERTEK TESTING SERVICE Report No.: HK10041262-1 Equipment Photographs Model : T7004 (External) FCC ID: PIYT7004T1

© 2010 Mattel, Inc. DC 3,0V 0,1W 900 MHz CR2032 © 2010 Mattel, Inc. DC 5,0V 0,5W CHINA CHINA T7005 T7006 T7005 / T7006 CR2032 x 1 FCC ID: PIYT7004D1 FCC ID: PIYT7004T1 T7004 FCC ID & Rating Insert FCC ID Tempo (outside the battery door) Dieline DielineWhite Collar Collar Dongle T7005 / T7006 (Asst. T7004) FCC ID Tempo White 1st run 2010 03/29/2010 PRODUCT: DESCRIPTION: PART NO.: COLORS: ISSUE: DATE / INITIAL: TOY YEAR: T7004 Rating / FCC Insert See Above 1st run 2010 03/13/2010 PRODUCT: DESCRIPTION: PART NO.: COLORS: ISSUE: DATE / INITIAL: TOY YEAR: x 1

INTERTEK TESTING SERVICE Report No.: HK10041262-1 Equipment Photographs Model : T7004 (Internal) Fi1 FCC ID: PIYT7004T1 INTERTEK TESTING SERVICE Report No.: HK10041262-1 Equipment Photographs Model : T7004 (Internal) FCC ID: PIYT7004T1 INTERTEK TESTING SERVICE Report No.: HK10041262-1 Equipment Photographs Model : T7004 (Internal) FCC ID: PIYT7004T1

Model: T7004 FCC ID: PIYT7004T1 Technical Description General During the normal operation, the dog tag will collect the motion and sound data and then send to dongle every 2 minutes. The middleware (a PC program) will convert a set of received data into a message and post on the Twitter website. The ball and Mic sensor is used to detect dog’s movement and bark sound respectively. The MCU of dog tag will collect both sensors’ status for 2 minutes and then send it to the dongle. Upon receiving the data from the dog tag, the dongle will flash the LED one time and then reply an ACK (acknowledgement) signal to the dog tag to confirm the reception. If the ACK signal is received, the dog tag will start to collect both sensors’ status again for 2 minutes again. RF The RF part consists of one single chip, model: MRF49XA. The MRF49XA is a low- power, Zero-IF, multi-channel FSK transceiver. All the RF and baseband functions and processes are integrated in the MRF49XA. The device for its operation requires only a single, 10 MHz crystal as a reference source and an external, low-cost host microcontroller. The MRF49XA supports the following functions: • Reset • Power Amplifier and Low Noise Amplifier • Synthesizer (PLL, VCO and Oscillator) • I/Q Mixers and Demodulators • Baseband Filters and Amplifiers • Received Signal Strength Indicator • Low Battery Detector • Wake-up Timer/Low Duty Cycle Mode • Data Quality Indicator Channel number and frequency table: Ch Center Freq (Mhz) Ch Center Freq (Mhz) 6 908.65 14 915.85 7 909.55 15 916.75 8 910.45 16 917.65 9 911.35 17 918.55 10 912.25 18 919.46 11 913.15 19 920.35 12 914.05 20 921.25 13 914.95 21 922.15 Channel spacing = 0.9 MHz.

1 1 2 2 3 3 4 4 5 5 6 6 DD CC BB AA D i st r i but e d t o S M T : N o Y e s Re v. : on de ma nd. L t d. / Ra di c a G a me s L t d. , a nd must be r e t ur ne d de t r i me nt a l t o t he i nt e r e st of Ra di c a Chi na c ove na nt s i t w i l l not be use d i n a ny ma nne r G a me s L t d. T hi s pr i nt i s l oa ne d a nd r e c i pi e nt e xpr e ss c onse nt of Ra di c a Chi na L t d. / Ra di c a ot he r s, i n pa r t or i n w hol e , w i t hout t he r e pr oduc e d, r e ve a l e d t o or a ppr opr i a t e d by c onf i de nc e a nd i s not t o be c opi e d, G a me s L t d. T hi s i nf or ma t i on i s di sc l ose d i n i s t he pr ope r t y of Ra di c a Chi na L t d. / Ra di c a pe r t a i ni ng t o t he a r t i c l e show n on t hi s she e t A l l de si gn, ope r a t i ve a nd pr oc e ss da t a D e sc r i pt i on: M ode l N o. : D r a w n by: Che c ke d by: A ppr ove d by: D r a w i ng N o. : D a t e : D a t e : D a t e : I N N O V A T I O N S RA D I CA : A M E M BE R O F RA D I CA G A M E S G RO U P S he e t of Cha nge d byD a t eD e sc r i pt i onRe v. C C11 T w i t t e r D og_ Col l a r ( M T P c hi p ) T7004 104 C9 32.768K Y1 15P C5 15P C6 CR2032 3V BATT1 220uF C7 VDD lizhuApr.12.10 220uF C8 C1 223 R1 51K Mic Q1 9014 R2 10M R3 200K C2 223 Q2 9014 D1 IN4148 R4 510K C3 OPEN ANT 104 C13 VDD RF Module(PCB.A) 12 S1 SWI TCH-SHAKE C10 332 R8 2M C17 104 VDD 220K 1 % R9 10 R10 104 C11 RESET C12 104 CLK=PIN 8 CLKOUT 3 RF_ANT GND 1 NRES=PIN 10 RESET 2 DCLK=PIN 7 RCLKOUT/FCAP/FINT 4 FSK=PIN 6FSK/DATA/FSEL 5 NIRO=PION 5 IRO 6 SDO=PIN 4 SDO 7 NESL=PIN 3 CS 8 SCK=PIN2 SCK 9 SDI=PIN1 SDI 10 NINT=PIN 16 INT/DIO 11 GND 12 VCC 13 RF_module R12 100 11 10 9 8 7 6 5 4 3 2 1 12 13 NRESET DCLK FSK /CS INT/DIO IRO SDI SDO SCK SCL SDA 0.1uF C16 A0 1 A1 2 A2 3 GND 4 SDA 5 SCL 6 TP 7 VDD 8 24C02 U3 10K R11 10K R13 SCL SDA C14 NC VDD BP00 1 BP01 2 BP02 3 BP03 4 BP04 5 BP05 6 BP06 7 BP07 8 X32I 19 X32O 20 OSCIN 17 OSCOUT 18 VS S 14 BP10 9 BP11 10 BP12 11 BP17 13 RESET 21 TEST 22 VDD 12 LVR 15 VDD_ SIM 33 BP13 29 BP14 30 BP15 31 BP16 32 CS 16 PWM+DAC 24 VDD_ SPK 25 PWM- 26 VS S_SPK 27 VS S 23 VP P 28 W588DF20 MTP P13 P13 P1.4 R7 220R C18 OPEN R14 OPEN CHIP=MRF49XA P _C SP 1.2 P1.1 P1.0 P1.0/1.1/1.2/P_CS Point and JP1 (open) f or Download code used VDD TEST JP1 2 1 3 SW2 10R R5 Remark: JP2 VDD Remark: C15 between CVDD and GND as 104 C15 power stability f or regulator output. Remark: Mask chip is available Cvdd P_CS pin pulled high , af ter downl oad code .

INTERTEK TESTING SERVICES Report No.: HK10041262-1 Sample No.: 1/7 Code: FCC15C_c / Effective Date: 04 Aug 2009 ( of ) Bandedge Plot – Pursuant to FCC Part 15 Section 15. 249 Requirement

- The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. - This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com TEST REPORT Report No.: HK10041262-1 Mattel Brands, A Division of Mattel Asia Pacific Sourcing Ltd./Mattel Direct Import Inc. Application For Certification (Original Grant) (FCC ID: PIYT7004T1) Transceiver Prepared and Checked by: Approved by: Signed On File Lau Chin Yu, Benny Engineer Chan Chi Hung, Terry Senior Lead Engineer Date: April 28, 2010 INTERTEK TESTING SERVICES Report No.: HK10041262-1 FCC ID: PIYT7004T1 i GENERAL INFORMATION Mattel Brands, A Division of Mattel Asia Pacific Sourcing Ltd./Mattel Direct Import Inc. MODEL: T7005 (Tag) FCC ID: PIYT7004T1 Grantee: Mattel Brands, A Division of Mattel Asia Pacific Sourcing Ltd./Mattel Direct Import Inc. Grantee Address: 13/F., South Tower, World Finance Centre, Harbour City, Tsim Sha Tsui, Kowloon, Hong Kong. Contact Person: Y. C. Wong Tel: (852) 3185-5000 Fax: (852) 2735-3758 e-mail: [email protected] Manufacturer: N/A Manufacturer Address: N/A Brand Name: N/A Model: T7005 (Tag) Additional Model: T7006 (Tag) Asst. No.: T7004 (Tag) Type of EUT: Transceiver Description of EUT: Puppy Tweets (T7004) Puppy Tweets Blue (T7005) Puppy Tweets Pink (T7006) Serial Number: N/A FCC ID : PIYT7004T1 Date of Sample Submitted: April 23, 2010 Date of Test: April 27, 2010 Report No.: HK10041262-1 Report Date: April 28, 2010 Environmental Conidtions: Temperature: +10 to 40°C Humidity: 10 to 90% INTERTEK TESTING SERVICES Report No.: HK10041262-1 FCC ID: PIYT7004T1 ii SUMMARY OF TEST RESULT Mattel Brands, A Division of Mattel Asia Pacific Sourcing Ltd./Mattel Direct Import Inc. MODEL: T7005 (Tag) FCC ID: PIYT7004T1 TEST SPECIFICATION REFERENCE RESULTS Maximum Peak Output Power 15.247(b), (c) / RSS-210 A8.4 N/A Hopping Channel Carrier Frequencies Separation (for 2.4GHz Digital) 15.247(e) / RSS-210 A8.1 N/A 20dB Bandwidth of the Hopping Channel 15.247(a) / RSS-210 A8.1 N/A Number of Hopping Frequencies 15.247(e) / RSS-210 A8.1 N/A Average Time of Occupancy of Hopping Frequency 15.247(e) / RSS-210 A8.1 N/A Anteann Conducted Spurious Emissions 15.247(d) / RSS-210 A8.5 N/A Radiated Spurious Emissions 15.247(d) / RSS-210 A8.5 N/A RF Exposure Compliance 15.247(i) / RSS-Gen 5.5 N/A Transmitter Power Line Conducted Emissions 15.207 / RSS-Gen 7.2.2 N/A Transmitter Field Strength (for 27MHz) 15.227 / RSS-310 3.8 N/A Transmitter Field Strength (for 40MHz) 15.229 / RSS-210 A2.7 N/A Transmitter Field Strength, Bandwidth and Timing Requirement (for Remote Control) 15.231(a) / RSS-210 A1.1.1 N/A Transmitter Field Strength, Bandwidth and Timing Requirement (for 433MHz) 15.231(e) / RSS-210 A1.1.5 N/A Transmitter Field Strength and Bandwidth Requirement(for 88-108MHz) 15.239 / RSS-210 A2.8 N/A Transmitter Field Strength and Bandwidth Requirement(for 902- 928MHz or 2.4GHz) 15.249 / RSS-210 A2.9 Pass Transmitter Field Strength and Bandwidth Requirement (for 49MHz) 15.235 / RSS-310 3.9 N/A Receiver / Digital Device Radiated Eissions 15.109 / ICES-003 N/A Digital Device Conducted Emissions 15.107 / ICES-003 N/A Note: 1. The EUT uses a permanently attached antenna which, in accordance to section 15.203, is considered sufficient to comply with the pervisions of this section. 2. Pursuant to FCC part 15 Section 15.215(c), the 20 dB bandwidth of the emission was contained within the frequency band designated (mentioned as above) which the EUT operated. The effects, if any, from frequency sweeping, frequency hopping, other modulation techniques and frequency stability over excepted variations in temperature and supply voltage were considered. INTERTEK TESTING SERVICES Report No.: HK10041262-1 FCC ID: PIYT7004T1 iii Table of Contents 1.0 General Description....................................................................................... 1 1.1 Product Description .......................................................................................... 1 1.2 Related Submittal(s) Grants.............................................................................. 1 1.3 Test Methodology............................................................................................. 1 1.4 Test Facility ...................................................................................................... 1 2.0 System Test Configuration ............................................................................ 2 2.1 Justification ...................................................................................................... 2 2.2 EUT Exercising Software.................................................................................. 2 2.3 Special Accessories ......................................................................................... 2 2.4 Equipment Modification .................................................................................... 2 2.5 Measuremen…

Text truncated - open the document above for the full version.

INTERTEK TESTING SERVICE Report No: HK10041262-1 FCC ID: PIYT7004T1 Configuration Photographs Worst-Case Radiated Emissions (Front View) Model : T7004 Figure 1 INTERTEK TESTING SERVICE Report No: HK10041262-1 FCC ID: PIYT7004T1 Configuration Photographs Worst-Case Radiated Emissions (Back View) Model : T7004 Figure 2