PJ5-LTTWireless MOB System (tag)

LifeTag System Installation & Commissioning Guide Document reference: 87064-1 Date: April 2006 87064_1.book Page 1 Thursday, April 6, 2006 2:38 PM Draft copy 06/04/06 Raymarine and SeaTalk are trademarks of Raymarine plc © Handbook contents copyright Raymarine plc Important Information WARNING:LifeTag System The Raymarine LifeTag system is only an aid to crew safety, and must not be relied upon as the vessel's main crew safety system. It is the responsibility of the Captain and all crew members to ensure that all safety instructions and procedures are in place and obeyed in accordance with local requirements. Failure to operate this system in accordance with the operating instructions may result in unreliable or reduced system performance. WARNING:Lithium Batteries The LifeTag System Tags use non-rechargeable lithium batteries. Do not attempt to recharge these batteries. Do not incinerate these batteries. Ensure that these batteries are replaced with a battery of the same type and check local regulations when disposing of spent batteries. Incorrectly fitting batteries or using the wrong battery types may result in un-reliable or reduced system performance. General Care & Safety The operation of some medical electronic devices, such as hearing aids and pacemakers, may be affected if a LifeTag or LifeTag Base Station is used next to them. Observe the makers recommendations for such devices. RF Energy The LifeTag and Lifetag Base Station are low-power radio transceivers. When on, they intermittently transmit RF energy (radio waves). The LifeTag and LifeTag Base Station are designed to comply with the limits for RF energy exposure for the general population set by national authorities and international health agencies, for example BS EN 50371:2002. Intended Use The LifeTag and LifeTag Base Station are intended as an aid to safety on leisure vessels and small workboats. Waste Electrical and Electronic (WEEE) Directive The WEEE Directive requires the recycling of waste electrical and electronic equipment. Whilst the WEEE Directive does not apply to some of Raymarine's products, we support its policy and ask you to be aware of how to dispose of this product. The crossed out wheelie bin symbol, illustrated above, and found on our products signifies that this product should not be disposed of in general waste or landfill. Please contact your local dealer, national distributor or Raymarine Technical Services for information on product disposal. 87064_1.book Page 2 Thursday, April 6, 2006 2:38 PM Draft copy 06/04/06 1 LifeTag Installation & Commissioning Guide Getting Started Figure 1 - Parts supplied Figure 2 - Tools required Figure 3 - Locating Base Station Self-tapping screws x2 Base Station Straps x2 Strap extensions x2 Tags x2 Cable ties Buzzer, bracket and fixing screws x2 CR2 3V lithium batteries x2 SeaTalk cable 3ft (1 meter) D8919-1 Pozidriv screwdriver Power Drill 7 / 64 inch (2.5 mm) drill 1 / 8 inch (3.5 mm) drill Countersink bit D9029-1 Min 3 ft 3 in (1m) D8955-1 Fit Base Station as high up as possible, in a dry location 87064_1.book Page 1 Thursday, April 6, 2006 2:38 PM Draft copy 06/04/06 2 LifeTag Installation & Commissioning Guide EMC Installation Guidelines All Raymarine equipment and accessories are designed to the best industry standards for use in the recreational marine environment. Their design and manufacture conforms to the appropriate Electromagnetic Compatibility (EMC) standards, but correct installation is required to ensure that performance is not compromised. Although every effort has been taken to ensure that they will perform under all conditions, it is important to understand what factors could affect the operation of the product. The guidelines given here describe the conditions for optimum EMC performance, but it is recognized that it may not be possible to meet all of these conditions in all situations. To ensure the best possible conditions for EMC performance within the constraints imposed by any location, always ensure the maximum separation possible between different items of electrical equipment. For optimum EMC performance, it is recommended that wherever possible: • Raymarine equipment and cables connected to it are: • At least 3 ft (1 m) from any equipment transmitting or cables carrying radio signals e.g. VHF radios, cables and antennas. In the case of SSB radios, the distance should be increased to 7 ft (2 m). • More than 7 ft (2 m) from the path of a radar beam. A radar beam can normally be assumed to spread 20 degrees above and below the radiating element. • The equipment is supplied from a separate battery from that used for engine start. Voltage drops below 10 V in the power supply to our products, and starter motor transients, can cause the equip- ment to reset. This will not damage the equipment, but may cause the loss of some information and may change the operating mode. • Raymarine specified cables are used. Cutting and rejoining these cables can compromise EMC performance and must be avoided unless doing so is detailed in the installation manual. • If a suppression ferrite is attached to a cable, this ferrite should not be removed. If the ferrite needs to be removed during installation it must be reassembled in the same position. Suppression Ferrites The following illustration shows typical cable suppression ferrites used with Raymarine equipment. Always use the ferrites supplied by Raymarine. Connections to Other Equipment If your Raymarine equipment is to be connected to other equipment using a cable not supplied by Raymarine, a suppression ferrite MUST always be attached to the cable near the Raymarine unit. EMC Conformance Always check the installation before going to sea to make sure that it is not affected by radio transmissions, engine starting etc. D3548-6 87064_1.book Page 2 Thursday, April 6, 2006 2:38 PM Draft copy 06/04/06 LifeTag Installation & Commissioning Guide3 Connecting Base Station The LifeTag system Base Station has to be…

Text truncated - open the document above for the full version.

LifeTag System Operating Guide Document reference: 81275-1 Date: April 2006 81275_1.book Page 1 Thursday, April 6, 2006 2:35 PM Draft copy 06/04/06 Raymarine and SeaTalk are trademarks of Raymarine plc © Handbook contents copyright Raymarine plc Important Information WARNING:LifeTag System The Raymarine LifeTag system is only an aid to crew safety, and must not be relied upon as the vessel's main crew safety system. It is the responsibility of the Captain and all crew members to ensure that all safety instructions and procedures are in place and obeyed in accordance with local requirements. Failure to operate this system in accordance with the operating instructions may result in unreliable or reduced system performance. WARNING:Lithium Batteries The LifeTag System Tags use non-rechargeable lithium batteries. Do not attempt to recharge these batteries. Do not incinerate these batteries. Ensure that these batteries are replaced with a battery of the same type and check local regulations when disposing of spent batteries. Incorrectly fitting batteries or using the wrong battery types may result in un-reliable or reduced system performance. General Care & Safety The operation of some medical electronic devices, such as hearing aids and pacemakers, may be affected if a LifeTag or LifeTag Base Station is used next to them. Observe the makers recommendations for such devices. RF Energy The LifeTag and Lifetag Base Station are low-power radio transceivers. When on, they intermittently transmit RF energy (radio waves). The LifeTag and LifeTag Base Station are designed to comply with the limits for RF energy exposure for the general population set by national authorities and international health agencies, for example BS EN 50371:2002. Intended Use The LifeTag and LifeTag Base Station are intended as an aid to safety on leisure vessels and small workboats. Waste Electrical and Electronic (WEEE) Directive The WEEE Directive requires the recycling of waste electrical and electronic equipment. Whilst the WEEE Directive does not apply to some of Raymarine's products, we support its policy and ask you to be aware of how to dispose of this product. The crossed out wheelie bin symbol, illustrated above, and found on our products signifies that this product should not be disposed of in general waste or landfill. Please contact your local dealer, national distributor or Raymarine Technical Services for information on product disposal. 81275_1.book Page 2 Thursday, April 6, 2006 2:35 PM Draft copy 06/04/06 1 LifeTag System Operating Guide The LifeTag system All Tags communicating with Base Station No alarm Signal lost from any Tag Alarm sounds Signal lost a Tag is submerged The LifeTag system will sound an alarm if . . . D8883-1 a Tag button is held down for 3 to 5 sec then released a Tag is out of range (typically 30 ft) of the Base Unit SeaTalk alarms If a LifeTag alarm occurs, a SeaTalk alarm will also be initiated if your LifeTag Base Station is connected to SeaTalk. For details of how SeaTalk alarms are indicated, refer to the handbooks for your other SeaTalk products . 81275_1.book Page 1 Thursday, April 6, 2006 2:35 PM Draft copy 06/04/06 2 LifeTag System Operating Guide If a Tag is not active, press and release the pushbutton to activate the Tag. 2. Ensure Tags are Active 1. Apply power to Base Station Base Station Getting started Before issuing Tags to crew members, check each Tag to ensure the LED indicator briefly flashes GREEN once every 10 seconds. This indicates that the Tag is ACTIVE. If the indicator shows any other indication, check below to determine what to do. 12 V dc Check that the Alarm 'chirps' briefly, as power is applied D884-1 3. Issue Tags to crew What to do if an alarm occurs How to carry Tags What will initiate an alarm How to know if a Tag is active How to know when a battery needs changing Issue Tags to your crew members, then instruct them how to use the LifeTag system. ColorAction Meaning Searching for Base Station. Wait for a few seconds. If normal operation does not start, check that the Base Station is switched on. Normal operation. The Tag is ready for use. Continuous half-second flashes every second Two flashes once every 10 seconds Continuous alternating flashes Brief flash once every 10 seconds GREEN GREEN & RED RED RED Low battery. Replace the battery as described in this guide. Tag LED indications D8985-1 Alarm indication. Carry out the Man Overboard procedure. Continuous brief flashesRED Tag is de-registered. 81275_1.book Page 2 Thursday, April 6, 2006 2:35 PM Draft copy 06/04/06 LifeTag System Operating Guide3 eitheroror in pocket on strap provided on belt Wearing your Tag D8890-1 Use extension if necessary Using the strap Ensure each crew member carries an active Tag at all times when on board. 81275_1.book Page 3 Thursday, April 6, 2006 2:35 PM Draft copy 06/04/06 4 LifeTag System Operating Guide What happens when an alarm occurs? When an alarm is initiated To cancel a LifeTag alarm 01234 seconds Repeat every 1 s until alarm canceled The Alarm buzzer sounds The indicator flashes RED continuously, half-second flashes every second On active Tags Optional 12 V output Other SeaTalk products Note: This will NOT cancel alarms on associated SeaTalk products. Refer to relevant product handbooks for details of how to cancel these alarms. Hold in a Tag button for 5 seconds D8986-1 If the LifeTag Base Station is connected to a Seatalk system which includes a SeaTalk chartplotter and GPS, and a LifeTag alarm occurs, a MOB marker will be displayed on the chartplotter at the location of the MOB event. In addition, the chartplotter and compatible Seatalk instruments (such as ST60+ and ST290 Graphic instruments) will display a MOB 999 Waypoint Name, and range / bearing or latitiude/longitude to the MOB location,plus elapsed time since the MOB event. This occurs only with compatible products on SeaTalk systems. It does NOT occur on other products connected via NMEA0183. When an …

Text truncated - open the document above for the full version.

1. Do NOT use a sharp object to open the Tag Do NOT open a Tag in wet or dirty conditions Preparing your Tag for use Fit Battery Before you can use your Tag, you must : Taking care not to disturb other internal components, insert the supplied CR2 3V battery CR2 3V Ensure correct polarity Important! 2. S n a p Replace the Tag back and snap shut 3. Use a coin or similar object to open the Tag 1. Fit the battery supplied. 2. Register the Tag with the LifeTag system on your boat. See overleaf 84196_1.fm Page 1 Thursday, March 30, 2006 3:11 PM Constant RED 1. Alternate RED and GREEN 4. Brief GREEN Flashes 2. RED Flashes IMMEDIATELY press and release Tag button, to activate (switch on) the Tag When you have fitted the Tag battery, bring the Tag near to your LifeTag system Base Station and switch on power to the Base Station. Note: If registration does not start, switch the Base Station off then on again, then repeat steps 2 to 4 5. When registration is complete, the Tag is operational and ready to be used with your LifeTag system. Check that within the next 15 seconds, registration starts. 3. Register Tag Registration must be completed within one minute of switching on power to the Base Unit. Important REGISTRATION START REGISTRATION COMPLETE Press and release Tag button again. 84196_1.fm Page 2 Thursday, March 30, 2006 3:11 PM

FEDERAL COMMUNICATIONS COMMISSION - FCC FORM 731 APPLICATION FOR EQUIPMENT AUTHORIZATION Approved by OMB 3060 - 0934 Expires 02/28/2005 Item 1. Applicant's complete, legal business name: Raymarine UK Limited Item 2. Applicant's mailing address Line 1: Quay Point Line 2: Northarbour Road P.O.Box: City: Portsmouth State: Hampshire Country (if foreign address): England, U.K. Zip/Postal Code: PO6 3TD Item 3. FCC ID: Grantee code: PJ5 Grantee Code Registration No. GC819326 * Equipment Product Code (14 characters maximum): -LTT Item 4. Person at the applicant's address to receive grant or for contact: First Name: Peter Mail Stop: Last Name: Bowen Telephone: +44 (0)23 9269 3611 Ext: 1307 Title: EMC Team Leader E-mail: [email protected] Fax No: +44 (0)23 9269 4642 Item 5. Instead of Applicant, the original Grant is authorized to be mailed to: Item 6. Technical Contact: Firm Name: Raymarine UK Ltd. Telephone: +44 (0)23 9269 3611 Ext: 1307 Fax No: +44 (0)23 9269 4642 First Name: Peter Middle Initial: A Last Name: Bowen Address Line 1: Quay Point P.O.Box: Address Line 2: Northarbour Road City: Portsmouth Country (if foreign address): England, U.K. Zip/Postal Code: PO6 3TD E-mail: [email protected] Item 7. Non-Technical Contact: Firm Name: Raymarine UK Ltd. Telephone: +44 (0)23 9269 3611 Ext: 1307 Fax No: +44(0)23 9269 4642 First Name: Peter Middle Initial: A Last Name: Bowen Address Line 1: Quay Point P.O.Box: Address Line 2: Northarbour Road City: Portsmouth Country (if foreign address): England, U.K. Zip/Postal Code: PO6 3TD E-mail: [email protected] Item 8. * Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules? If "Yes" see instructions. (please mark as appropriate) Ο ΟΟ Ο Yes Ο ΟΟ Ο No Item 9. Does the applicant request that the Commission defer grant of this application pursuant 47 CFR § 0.457(d)(1)(ii)? (See instructions) No If so, specify date when grant may be issued (MM/DD/YYYY format): Item 10. * Equipment Class: Part 15 Spread Spectrum Transmitter * Description of Product as it is Marketed: Wireless MOB System LifeTag (NOTE: This text will appear below the equipment class on the grant) Item 11. * Application is for: (please mark as appropriate) Ο ΟΟ Ο Original Equipment (See instructions) Ο ΟΟ Ο Change in identification of presently authorized equipment: Original FCC ID: Grant Date (MM/DD/YYYY format): Ο ΟΟ Ο Class II permissive change or modification of presently authorized equipment (See instructions) Item 12. Is the equipment in this application: * (a) a composite device subject to an additional equipment authorization? * (b) part of a system that operates with, or is marketed with, another device that requires an equipment authorization? If either of the above questions is answered "Yes" complete section 12(c). Ο ΟΟ Ο Yes Ο ΟΟ Ο No Ο ΟΟ Ο Yes Ο ΟΟ Ο No (c) The related application: Ο ΟΟ Ο has been granted under the FCC ID listed to the right Ο ΟΟ Ο is in the process of being filed under the FCC ID listed to the right Ο ΟΟ Ο is pending with the FCC under the FCC ID listed to the right FCC ID PJ5-LTB Item 13. Name of test firm and contact person on file with the FCC, if different from applicant or contact person: Firm Name: Raymarine Limited (FCC Reg. No. 970522) Last Name: Telephone Ext Fax No. E-mail: Item 14. Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization. This product forms part of the Raymarine Wireless MOB System E12185 Read each certification carefully before answering and signing this application WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTITUTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503). Item 15. *SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION: The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes. Does the applicant or authorized agent so certify? Ο ΟΟ Ο Yes Ο ΟΟ Ο No Item 16. APPLICANT/AGENT CERTIFICATION: I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. IN accepting a Grant of Equipment Authorization issued by the FCC as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements. Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application. If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time. * Signature of Authorized Person Filing: FRN 0013-3487-27 Title of authorized …

Text truncated - open the document above for the full version.

Raymarine UK Limited. Registered in England. Company No. 04578449 Registered Office: Quay point, Portsmouth PO6 3TD Raymarine Limited Quay Point Portsmouth Hampshire PO6 3TD England 023 9269 3611 023 9269 4642 (Fax) www.raymarine.com Telecommunication Certification Body RFI Global Services Ltd Pavilion A Ashwood Park Basingstoke Hampshire RG23 8BG Attention: Mr Kevin Hall 6th June 2006 Dear Sir, Application for Grant of FCC Equipment Authorization- LifeTag PJ5-LTT We hereby declare that the Raymarine LifeTag, part Number E15026, FCC ID PJ5-LTT, is a component part of the Raymarine LifeTag Wireless MOB System, Part Number E12185. This system as sold comprises two LifeTags E15026 and a LT Base Station, Part Number A18130, FCC ID PJ5-LTB. However, a working system may utilize up to sixteen LifeTags and, for larger vessels where the normal range of operation is insufficient, a second LT Base Station may be installed and configured to act as a wireless router with the sole function of retransmitting data from out-of-range LifeTags to the first LT Base Station. An explanation of operation of the LT Base Station as a router is given in the Technical Description, and configuration information is given in the user documentation. Sincerely, Peter Bowen, EMC Team Leader, Raymarine UK Limited

Raymarine Limited Quay Point Northarbour Road Portsmouth Hampshire PO6 3TD England 023 9269 3611 023 9269 4642 (Fax) www.raymarine.com Telecommunication Certification Body RFI Global Services Ltd Pavilion A Ashwood Park Basingstoke Hampshire RG23 8BG 30th May 2006 Certification Application Confidentiality Request regarding application for certification of the following FCC Identifiers: • FCC ID PJ5-LTB (LT Base Station A18130 - Part of LifeTag Wireless MOB System E12185) • FCC ID PJ5-LTT (LifeTag E15026 - Part of LifeTag Wireless MOB System E12185) Pursuant to Sections 0.457 and 0.459 of the Commission's Rules, we hereby request confidential treatment of information accompanying these applications as outlined below: • Schematics • Block Diagrams • Parts Lists The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of these applications and all accompanying documentation will not be made before the date of the Grant for these applications. Yours faithfully, Peter Bowen EMC Team Leader, Raymarine Limited

RFI Global Services Ltd Ewhurst Park Ramsdell Basingstoke Hants RG26 5RQ 07 July 2006 UK Ref FCC ID:PJ5-LTT TC810343 Dear Sir When the original upload was carried out 4 test reports were uploaded, 2 FCC reports and 2, by error, EU reports, not required for the FCC application. I have uploaded the FCC reports again (Test Report 1, Test report 2) as I am not sure of the first 4 which is which.. Could you supersede the original reports Yours sincerely Principal Engineer

E15026 LifeTag PJ 5-LTT IC:4069B-LTT (Part of LifeTag Wireless MOB Syst em E12185) External Photographs LifeTag Front View LifeTag Re ar View LifeTag Lower Rear Perspective View

E15026 LifeTag PJ5-LTT IC:4069B-LTT (Part of LifeTag Wireless MOB System E12185) Labels LifeTag Label Position Close-up Photograph of LifeTag label

E15026 LifeTag PJ 5-LTT IC:4069B-LTT (Part of LifeTag Wireless MOB System E12185) Internal Photographs LifeTag Rear cover removed sho wing PCB and battery compartment LifeTag Internal View, Fron t & Rear Covers with PCB removed LifeTag LifeTag PCB Front View PCB Rear View

LifeTag Wireless MOB System E12185 Internal Photographs A18130 LT Base Station PJ5-LTB IC:4069B-LTB E15026 LifeTag PJ 5-LTT IC:4069B-LTT LT Base Station LT Base Station LT Base Sta tion Front View, Primary Cover Second ary Cover Front View, Primary and Removed Secondary Covers Removed LT Base Station PCB Front View LT Base Station PCB Rear View LifeTag Rear cover removed sho wing PCB and battery compartment LifeTag Internal View, Fron t & Rear Covers with PCB removed LifeTag LifeTag PCB Front View PCB Rear View

SP629-004 - EMC Compliance Technical Description Issue 1.02.doc SP629-004 Issue 1.02 Page 1 DO NOT DISTRIBUTE Project Development Number LifeTag System – Technical Description D629 Prepared by Date Issue Stephen Grant – Raymarine 17th May 2006 1.02 RAYMARINE LIMITED/RAYMARINE INC PROPRIETARY DATA This document contains proprietary technical data pertaining to items, or components, or processes or other matter developed or acquired at the private expense of Raymarine Limited/Raymarine Inc and is restricted to use only by Raymarine employees or other persons authorised by Raymarine Limited/Raymarine Inc in writing to use it. Neither said document nor said technical data shall be furnished or disclosed to or copied or used by persons outside Raymarine Limited/Raymarine Inc without the express written approval of Raymarine Limited/Raymarine Inc. Issued copies to be signed off below: Author Date Stephen Grant 17th May 2006 Project Manager Date Colin Metcalfe 17th May 2006 IMPORTANT NOTE This document is controlled under PVCS. It is the responsibility of the person using this document to ensure that it is the latest Revision. If there is any doubt about whether or not this document is the latest Revision then please check with the Vessel Control and Data Manager. SP629-004 - EMC Compliance Technical Description Issue 1.02.doc SP629-004 Issue 1.02 Page 2 DO NOT DISTRIBUTE Change Notes Revision Description Date 1.0 Initial Issue 23 March 2006 1.01 Router duty cycle increased due to larger Unicast packet with security. The packet size has increased from 36 to 46 bytes, Receiver sensitivity specification changed after testing LifeTag - 76dBm, Base Station –71dBm 12 April 2006 1.02 Layout and grammatical revisions 17th May 2006 SP629-004 - EMC Compliance Technical Description Issue 1.02.doc SP629-004 Issue 1.02 Page 3 DO NOT DISTRIBUTE CONTENT 1 Purpose ..............................................................................................................................4 2 Reference Documents ......................................................................................................4 2.1 RAYMARINE....................................................................................................................4 2.2 NON-RAYMARINE............................................................................................................4 3 Introduction........................................................................................................................5 4 Description of Product......................................................................................................6 4.1 LIFETAG.........................................................................................................................6 4.1.1 Block Diagram.......................................................................................................6 4.2 LIFETAG BASE STATION..................................................................................................6 4.2.1 Block Diagram.......................................................................................................6 4.2.2 RF Transceiver .....................................................................................................7 4.2.3 Host Processor .....................................................................................................7 4.2.4 Seatalk Interface and Power.................................................................................7 5 Description of System ......................................................................................................8 5.1 SINGLE BASE STATION SYSTEM......................................................................................8 5.2 EXTENDED SYSTEM........................................................................................................8 6 System Operation Description.........................................................................................9 6.1 SINGLE BASE STATION (CO-ORDINATOR) AND MULTIPLE TAGS.........................................9 6.1.1 Description of Operation .......................................................................................9 6.1.2 Normal Operation - Communication Sequence ....................................................9 6.2 TWO BASE STATIONS (CO-ORDINATOR AND ROUTER) ....................................................10 6.2.1 Description of Operation .....................................................................................10 6.2.2 Two Base Stations - Communication Sequence ................................................10 6.2.2.1 Communication Sequence from Tag to Co-ordinator. ................................................ 10 6.2.2.2 Communication Sequence from Tag to Co-ordinator through Router ........................ 10 7 RF Implementation ..........................................................................................................11 7.1 RF PHYSICAL LAYER....................................................................................................11 7.2 RF DUTY CYCLE..........................................................................................................11 7.2.1 Life Tag Duty Cycle.............................................................................................11 7.2.1.1 Transmission Duty Cycle Characteristics ................................................................... 11 7.2.1.2 100mSecond Duty Cycle ............................................................................................ 11 7.2.1.3 Calculation.................................................................................................................. 12 7.2.2 Co-ordinator Duty Cycle......................................................................................12 7.2.2.1 Transmission Duty Cycle Characteristics ................................................................... 12 7.2.2.2 100mSecon…

Text truncated - open the document above for the full version.

E15026 LifeTag PJ5-LTT IC:4069B-LTT (Part of LifeTag Wireless MOB System E12185) RF Exposure FCC Rule 15.247(b) requires an rf expo sure evaluation to ensure that FCC guidelines on rf exposure limits are n ot exceeded. The LifeTag complies with these Guidelines and details of t he calculations on which compliance is based are given in the Test Report b elow, which is filed under Exhibits: Test Reports: E15026 LifeTag PJ 5-LTT Report 629/1012, Section 12. IC:4069B-LTT

Raymarine Ltd. Register…

Text truncated - open the document above for the full version.