PJMCVENDContactless Payment and Ticketing Module

cVEND plug - Precautions User Manual Company: FEIG ELECTRONIC GmbH Name: Ludger Bernard Date: 4/8/15 File: cVEND plug - Precautions User Manual.doc Changes or modifications made to the equipment not expressly approved by FEIG ELECTRONIC GmbH may void the FCC / IC authorization to operate this equipment. The use of the transceiver module is authorized in mobile or fixed host devices taking into account the conditions listed below:  OEM Integrator must ensure that the end user manual may not contain any information about the way to install or remove the module from the final product.  Depending on the final host device additional authorization requirements for the non- transmitter functions of the transmitter module may be required (i.e., Verification, or Declaration of Conformity) The OEM integrator is responsible for ensuring that after the module is installed and operational the host continues to be compliant with the Part 15B unintentional radiator requirements.  The information on the label and in the user manual is required to be incorporated in the user manual of the final host. See 47 CFR15 requirements for more details (e.g. 15.19 / 15.21 / 15.101 / 15.105 / RSS-GEN).  Additional label with the words ‘Contains FCC ID: PJMCVEND’ and ‘Contains IC: 6633A- CVEND’ shall be applied and visible from the outside of the host product.  The module must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the module.  The power supply for the module must be 5,0 to 5,5 V DC (Ripple < 80 mVpp).  It is not necessary to shield the module to comply with the FCC / IC requirements. The antenna must not be shielded.  The antenna of the module may not be removed, replaced nor modified. The antenna must not be co-located or operating in conjunction with any other antenna or transmitter. No additional antenna must be used.

INSTALLATION Preliminary Confidential 2015-02-20 - cVEND plug - User manual.docx cVEND plug Contactless Payment and Ticketing Module Installation cVEND plug FEIG ELECTRONIC GmbH Page 2 of 24 cVEND plug - User manual.docx Note  Copyright 2014 by FEIG ELECTRONIC GmbH Lange Strasse 4 D-35781 Weilburg Tel.: +49 6471 3109-0 http://www.feig.de With the edition of this document, all previous editions become void. Indications made in this manual may be changed without previous notice. The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or design. Composition of the information in this document has been done to the best of our knowledge. FEIG ELECTRONIC GmbH does not guarantee the correctness and completeness of the details given in this manual and may not be held liable for damages ensuing from incorrect or incomplete information. Since, despite all our efforts, errors may not be completely avoided, we are always grateful for your useful tips. The instructions given in this manual are based on advantageous boundary conditions. FEIG ELECTRONIC GmbH does not give any guarantee promise for perfect function in cross environments and does not give any guaranty for the functionality of the complete system which incorporates the subject of this document. FEIG ELECTRONIC call explicit attention that devices which are subject of this document are not designed with components and testing methods for a level of reliability suitable for use in or in connection with surgical implants or as critical components in any life support systems whose failure to perform can reasonably be expected to cause significant injury to a human. To avoid damage, injury, or death, the user or application designer must take reasonably prudent steps to protect against system failures. FEIG ELECTRONIC GmbH assumes no responsibility for the use of any information contained in this document and makes no representation that they free of patent infringement. FEIG ELECTRONIC GmbH does not convey any license under its patent rights nor the rights of others. All brand names, trademarks or logos are property of their respective owners. Contact: Commercial Questions: [email protected] Technical Questions: [email protected] Installation cVEND plug FEIG ELECTRONIC GmbH Page 3 of 24 cVEND plug - User manual.docx Contents 1. Warnings - Read before start-up ! 4 1.1. Safety Instructions ............................................................................................................ 4 1.2. Security Instructions ......................................................................................................... 4 2. Characterization 5 3. Mechanical Integration 7 3.1. Dimensions ........................................................................................................................ 9 4. Connection 10 4.1. Connector X1 - Ethernet Interface .................................................................................. 11 4.2. Connector X2 - USB Device Interface ............................................................................ 12 4.3. Connector X3 - RS232 V.24 (UART#1) Interface ............................................................ 13 4.4. Connector X4 - RS232-LVTTL (UART#0) Interface ........................................................ 14 4.5. Connector X5 – Power Supply Vcc ................................................................................. 15 4.6. Wake-Up ........................................................................................................................... 16 4.7. Connector X6, X11, X12 - Extension Interfaces ............................................................. 17 4.7.1. Connector X6 - RGB Display (cVEND plug flex only) ................................................. 17 4.7.2. Connector X11 - SAM and SD Interface ..................................................................... 18 4.7.3. Connector X12 - Auxiliary Interfaces .......................................................................... 18 5. Technical Data 19 5.1. Standard Compliance ...................................................................................................... 20 5.2. Radio Approvals .............................................................................................................. 20 5.2.1. Europe (CE) ............................................................................................................... 20 5.2.2. USA (FCC) and Canada (IC) ...................................................................................... 21 6. cVEND plug SAM Extension - Option 23 Installation cVEND plug FEIG ELECTRONIC GmbH Page 4 of 24 cVEND plug - User manual.docx 1. Warnings - Read before start-up ! 1.1. Safety Instructions  The device may only be used for the intended purpose designed for by the manufacturer.  The operation manual should be conveniently kept available at all times for each user.  Unauthorized changes and the use of spare parts and additional devices which have not been sold or recommended by the manufacturer may cause fire, electric shocks or injuries. Such unauthorized measures shall exclude any liability by the manufacturer.  The liability-prescriptions of the manufacturer in the issue valid at the time of purchase are valid for the device. The manufacturer shall not be held legally responsible for inaccuracies, errors, or omissions in the manual or automatically set parameters for a device or for an incorrect application of a device.  Repairs may only be executed by the manufacturer.  Installation, operation, and maintenance procedures should only be carried out by qualified personnel.  Use of the device and its installation must be in accordance with national legal requirements…

Text truncated - open the document above for the full version.

Test report no.: 1-8870/14-01-01_AnnexA Page 1 of 4 Annex A This test report annex is electronically signed and valid without handwriting signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report annex authorised: Christoph Schneider Radio Communications & EMC Test report no.: 1-8870/14-01-01_AnnexA Page 2 of 4 External ph ot os o f t he EU T Photo 1: Photo 2: Test report no.: 1-8870/14-01-01_AnnexA Page 3 of 4 Photo 3: Photo 4: Test report no.: 1-8870/14-01-01_AnnexA Page 4 of 4 Docu men t his to r y Version Applied changes Date of release Initial release 2015-02-13

Label cVEND plug 1 / 1 File : cVEND plug - Label.DOC Date : 2015-04-08 Dimensions (W x H): approx. 12 x 65 mm² Position:

Internal Photos cVEND plug 1 / 3 File : cVEND plug - Internal Photos.DOC Date : 2015-02-20 Plug Internal Photos cVEND plug 2 / 3 File : cVEND plug - Internal Photos.DOC Date : 2015-02-20 Antenna Internal Photos cVEND plug 3 / 3 File : cVEND plug - Internal Photos.DOC Date : 2015-02-20 Mainboard

TEST REPORT Test report no.: 1-8870/14-01-05-A Testing laboratory Applicant CETECOM ICT Services GmbH Untertuerkheimer Strasse 6 – 10 66117 Saarbruecken / Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: http://www.cetecom.com e-mail: [email protected] Accredited Testing Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2005) by the Deutsche Akkreditierungsstelle GmbH (DAkkS) The accreditation is valid for the scope of testing procedures as stated in the accreditation certificate with the registration number: D-PL-12076-01-00 FEIG ELECTRONIC GmbH Lange Str. 4 35781 Weilburg-Waldhausen / GERMANY Phone: +49 6471 31 09-0 Fax: -/- Contact: Ludger Bernard e-mail: [email protected] Phone: -/- Manufacturer FEIG ELECTRONIC GmbH Lange Str. 4 35781 Weilburg-Waldhausen / GERMANY Test standard/s 47 CFR Part 15 Title 47 of the Code of Federal Regulations; Chapter I; Part 15 - Radio frequency devices RSS - 210 Issue 8 Spectrum Management and Telecommunications Radio Standards Specification - Licence-exempt Radio Apparatus (All Frequency Bands): Category I Equipment For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: Secure Device for Contactless Payment & Ticketing Model name: cVEND plug FCC ID: PJMCVEND IC: 6633A-CVEND Frequency: 13.56 MHz Technology tested: RFID Antenna: Integrated antenna Power supply: 5.0 V DC by external power supply Temperature range: -25°C to +70°C This test report is electronically signed and valid without handwriting signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report authorised: Test performed: p. o. Marco Bertolino Christoph Schneider Radio Communications & EMC Radio Communications & EMC Test report no.: 1-8870/14-01-05-A Page 2 of 20 1 Table of contents 1 Table of contents ............................................................................................................................................ 2 2 General information ....................................................................................................................................... 3 2.1 Notes and disclaimer .......................................................................................................................... 3 2.2 Application details ............................................................................................................................... 3 3 Test standard/s ............................................................................................................................................... 3 4 Test environment ............................................................................................................................................ 4 5 Test item .......................................................................................................................................................... 4 5.1 Additional information ........................................................................................................................ 4 6 Test laboratories sub-contracted ................................................................................................................. 4 7 Description of the test setup ......................................................................................................................... 5 7.1 Radiated measurements ..................................................................................................................... 5 7.2 Open area site ...................................................................................................................................... 6 7.3 AC conducted ...................................................................................................................................... 7 7.4 Conducted measurements ................................................................................................................. 8 8 Summary of measurement results ............................................................................................................... 9 9 Additional comments ................................................................................................................................... 10 10 Measurement results ................................................................................................................................ 11 10.1 Field strength of the fundamental ................................................................................................ 11 10.2 99 % emission bandwidth ............................................................................................................. 12 10.3 Field strength of the harmonics and spurious ........................................................................... 13 10.4 Frequency tolerance ...................................................................................................................... 17 11 Test equipment and ancillaries used for tests ...................................................................................... 18 12 Observations ............................................................................................................................................. 18 Annex A Document history .......................................................................................................................... 19 Annex B Further information ........................................................................................................................ 19 Annex C Accreditation Certificate ............................................................................................................... 20 Test report no.: 1-8870/14-01-05-A Page 3 of 20 2 General information 2.1 Notes and disclaimer The test results of this test report relate exclus…

Text truncated - open the document above for the full version.

Test report no.: 1-8870/14-01-01_AnnexC Page 1 of 4 Annex C This test report annex is electronically signed and valid without handwriting signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report annex authorised: Christoph Schneider Radio Communications & EMC Test report no.: 1-8870/14-01-01_AnnexC Page 2 of 4 EUT Test se tu p p h otos Photo 1: Photo 2: Test report no.: 1-8870/14-01-01_AnnexC Page 3 of 4 Photo 3: Photo 4: Test report no.: 1-8870/14-01-01_AnnexC Page 4 of 4 Docu men t his to r y Version Applied changes Date of release Initial release 2015-02-13