PJMLRU2000RFID Reader

MONTAGE INSTALLATION final public (B) 2006-09-03 M60801-0de-ID-B.doc OBID i-scan ® ID ISC.LRU2000 (deutsch / english) OBID i-scan ® MontageID ISC.LRU2000 FEIG ELECTRONIC GmbHSeite 2 von 56M60801-0de-ID-B.doc D E U T S C H deutsche Version ab Seite 3 english version from page 30 E N G L I S H OBID i-scan ® MontageID ISC.LRU2000 FEIG ELECTRONIC GmbHSeite 3 von 56M60801-0de-ID-B.doc D E U T S C H Hinweis © Copyright 2004 - 2006 by FEIG ELECTRONIC GmbH Lange Strasse 4 D-35781 Weilburg-Waldhausen Tel.: +49 6471 3109-0 http://www.feig.de Alle früheren Ausgaben verlieren mit dieser Ausgabe ihre Gültigkeit. Die Angaben in diesem Dokument können ohne vorherige Ankündigung geändert werden. Weitergabe sowie Vervielfältigung dieses Dokuments, Verwertung und Mitteilung ihres Inhalts sind nicht gestattet, soweit nicht ausdrücklich zugestanden. Zuwiderhandlung verpflichtet zu Schadenersatz. Alle Rechte für den Fall der Patenterteilung oder Gebrauchsmuster-Eintragung vorbehalten. Die Zusammenstellung der Informationen in diesem Dokument erfolgt nach bestem Wissen und Gewissen. FEIG ELECTRONIC GmbH übernimmt keine Gewährleistung für die Richtigkeit und Vollständigkeit der An- gaben in diesem Dokument. Insbesondere kann FEIG ELECTRONIC GmbH nicht für Folgeschäden auf Grund fehlerhafter oder unvollständiger Angaben haftbar gemacht werden. Da sich Fehler, trotz aller Bemü- hungen nie vollständig vermeiden lassen, sind wir für Hinweise jederzeit dankbar. Die in diesem Dokument gemachten Installationsempfehlungen gehen von günstigsten Rahmenbedingun- gen aus. FEIG ELECTRONIC GmbH übernimmt weder Gewähr für die einwandfreie Funktion in system- fremden Umgebungen, noch für die Funktion eines Gesamtsystems, welches die in diesem Dokument be- schriebenen Geräte enthält. FEIG ELECTRONIC weist ausdrücklich darauf hin, dass die in diesem Dokument beschriebenen Geräte nicht für den Einsatz mit oder in medizinischen Geräten oder für Geräte für lebenserhaltende Maßnahmen konzipiert sind, bei denen ein Fehler eine Gefahr für menschliches Leben oder für die gesundheitliche Un- versehrtheit zur Folge haben kann. Der Applikationsdesigner ist dafür verantwortlich geeignete Maßnahmen zu ergreifen um Gefahren, Schäden oder Verletzungen zu vermeiden. Geräte, die in diesem Dokument beschrieben werden dürfen nicht im "Transport Markt" verkauft, benutz, geleast, angeboten oder anderweitig übertragen, exportiert und importiert werden. Als "Transport Markt" sind folgende Anwendungen definiert: (I) Elektronische Maut und Verkehrs Management (ETTM), (II) öffentliche Kraftfahrzeugzulassung, -Registrierung und -Kontrolle (III) Verfolgung von schienengebundenen Lokomoti- ven und Wagons (IV) erdgebundene Managementsysteme für Flughafen Transporte (GTMS) und Taxi Ab- fertigung (V) kostenpflichtige Parksysteme und (VI) Fahrzeug initiierte mobile Bezahlsysteme, bei denen der RFID Transponder bereits bei Auslieferung montiert ist, aber nicht beim Fahrzeughersteller in das Fahrzeug integriert wurde. FEIG ELECTRONIC GmbH übernimmt keine Gewährleistung dafür, dass die in diesem Dokument enthal- tenden Informationen frei von fremden Schutzrechten sind. FEIG ELECTRONIC GmbH erteilt mit diesem Dokument keine Lizenzen auf eigene oder fremde Patente oder andere Schutzrechte. OBID ® und OBID i-scan ® ist ein eingetragenes Warenzeichen der FEIG ELECTRONIC GmbH OBID i-scan ® MontageID ISC.LRU2000 FEIG ELECTRONIC GmbHSeite 4 von 56M60801-0de-ID-B.doc D E U T S C H Inhalt 1Sicherheits- und Warnhinweise - vor Inbetriebnahme unbedingt lesen6 2Leistungsmerkmale der Readerfamilie ID ISC.LRU20007 2.1Leistungsmerkmale.......................................................................................................7 2.2Verfügbare Readertypen...............................................................................................7 2.3Montage..........................................................................................................................8 2.3.1 Kabelverschraubungen ...................................................................................................9 2.3.2 Öffnen des Deckels .......................................................................................................10 2.4Anschlussklemmen.....................................................................................................11 2.5Antennenanschluss ....................................................................................................12 2.6Versorgungsspannung ...............................................................................................12 2.7Eingänge / Ausgänge ..................................................................................................13 2.7.1 Optokoppler ...................................................................................................................13 2.7.2 Relais ............................................................................................................................15 2.7.3 Readersynchronisation..................................................................................................16 2.8Anschluss externer Diagnose-LEDs..........................................................................17 2.9Schnittstellen ...............................................................................................................18 2.9.1 RS232-Schnittstelle .......................................................................................................18 2.9.2 RS485/RS422 Schnittstelle ...........................................................................................19 2.9.3 Netzwerkanschluss .......................................................................................................20 2.9.4 CompactFlash-Steckplatz (nur Gerätevarianten mit ACC)..........................................20 3Bedien- und Anzeigeelemente21 3.1LEDs ..................................................................................................…

Text truncated - open the document above for the full version.

CONFIDENTIALITY REQUEST Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 December 04, 2006 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, FEIG ELECTRONIC GmbH requests confidentiality for the following products: FCC ID Number Product Title/Model PJMLRU2000ID ISC.LRU2000 / ID ISC.LRMU2000 For the product stated above, we request that the following information be held confidential: 1.Circuit diagrams, BOM, and PCBs submitted as Equipment Authorization Electronic Filing attachment: “ LRU2000 ‐ Schematic Analog.pdf” “ LRU2000 ‐ Schematic Digital.pdf” “ LRU2000 ‐ BOM Analog.pdf” “ LRU2000 ‐ BOM Digital.pdf” “ LRU2000 ‐ PCB Analog.pdf” “ LRU2000 ‐ PCB Digital.pdf”. 2. Block diagram submitted as Equipment Authorization Electronic Filing attachment: “ LRU2000 ‐ Block Diagram.pdf” 3. Operational description submitted as Equipment Authorization Electronic Filing attachment: “ LRU2000 ‐ Product Description.pdf”. The above exhibits contain FEIG ELECTRONIC GmbH trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our mobile handset. This material is not customarily available to the general public and we request that it be withheld from public inspection. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name:Elmar Reichwein Company:FEIG ELECTRONIC GmbH Address:Lange Strasse 4 D‐35781 Weilburg‐Waldhausen Germany Phone:+49 6471 3109 438 Email:[email protected]

FCC ID: PJMLRU2000 FEIG ELECTRONIC GmbH1/1 Modular Approval requests ID ISC.LRMU2000 / ID ISC.LRU2000 The requirements of Public Notice DA 00-1407 are met as follows: 1. The UHF circuitry of the reader module has its own RF shielding. The RF shielding is shown in the photographs of the Test Report. 2. The ID ISC.LRMU2000 or the ID ISC.LRU2000 have buffered data inputs 3. The ID ISC.LRMU2000 or the ID ISC.LRU2000 have their own voltage regulators. 4. A unique SMA-connector provides connection between the ID ISC.LRMU2000 or the ID ISC.LRU2000 and an external antenna as shown in the photographs of the Test Report. 5. The EUTs were tested in a standalone type configuration as described below: The reader was set in the buffered read mode. In this mode the reader buffers all read data of transponders till the buffers are read out of a host. 6. A label with the FCC ID is stuck on the module an a copy of this label has been included in the Installation Manual for this product. The Installation also includes instructions how to label the end product. 7. The ID ISC.LRMU2000 or the ID ISC.LRU2000 are compliant with all applicable FCC rules. Instructions for maintaining compliance are given in the Installation Manual. 8. The ID ISC.LRMU2000 or the ID ISC.LRU2000 are compliant with all applicable RF exposure requirements for devices intended for mobile operation.

CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4329-01-02/06 Date: 2006-12-04 Page 38 of 41 5 Photographs of EUT Photo 1: Photo 2:

FCC ID: PJMLRU2000 FEIG ELECTRONIC GmbH1/1 Labels ID ISC.LRMU2000 / ID ISC.LRU2000 ID ISC.LRMU2000: 25 x 16 mm 2 ID ISC.LRU2000: 25 x 16 mm 2 Position of the Label: The label position on the ID ISC.LRU2000 and the ID ISC.LRMU2000 is the same.

CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4329-01-02/06 Date: 2006-12-04 Page 38 of 41 5 Photographs of EUT Photo 1: Photo 2: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4329-01-02/06 Date: 2006-12-04 Page 39 of 41 Photo 3: Photo 4: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4329-01-02/06 Date: 2006-12-04 Page 40 of 41 Photo 5: Photo 6: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4329-01-02/06 Date: 2006-12-04 Page 41 of 41 Photo 7: Photo 8:

FCC ID: PJMLRU2000 FEIG ELECTRONIC GmbH1/1 RF Exposure Compliance Requirement ID ISC.LRMU2000 / ID ISC.LRU2000 The maximum permissible exposure (MPE) for general population is defined as 0.6mW/cm 2 ( f / 1500, FCC OET Bulletin 65, Supplement B). The distance from the transmitting antenna where the exposure level reaches the maximum permitted level is calculated using equation (1): 2 4R EIRP S ⋅⋅ = π (1) where: S = Power density 0.6mW/cm 2 EIRP = Power output of an isotropic antenna 4W R = Distance to the centre of the radiation of the antenna Solving equation (1) the minimum distance at which a person must keep away in a uncontrolled exposure is R = 23cm The maximum permissible exposure (MPE) for controlled exposure is defined as 3mW/cm 2 ( f / 300, FCC OET Bulletin 65, Supplement B). Solving equation (1) where S = 3mW/cm 2 the minimum distance at which a person must keep away in a uncontrolled exposure is R = 10,3cm

CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4329-01-02/06 Date: 2006-12-04 Page 1 of 41 P:\06\4329_1\Task2(SRD FCC part15)\2-4329-01-02-06_v3.doc Recognized by the Federal Communications Commission Anechoic chamber registration no.: 90462 (FCC) Anechoic chamber registration no.: 3463 (IC) TCB ID: DE 0001 Accredited by the German Accreditation Council DAR–Registration Number DAT-P-176/94-D1 Independent ETSI compliance test house ETSI Accredited Bluetooth ® Test Facility (BQTF) Test report no. : 2-4329-01-02/06 Applicant : FEIG ELECTRONIC GmbH Type : ID ISC.LRU2000 Test Standard : FCC Part 15.247 RSS210 Issue 6 FCC ID : PJMLRU2000 Certification No. IC : -.- The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Cetecom ICT is under license CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4329-01-02/06 Date: 2006-12-04 Page 2 of 41 Table of contents 1. ADMINISTRATIVE DATA ......................................................................................................................................3 1.1. ADMINISTRATIVE DATA OF THE TEST FACILITY..................................................................................................... 3 1.1.1 Identification of the testing laboratory ......................................................................................................... 3 1.1.2 Organizational items.....................................................................................................................................3 1.1.3 Applicant ́s details ........................................................................................................................................ 4 1.2 ADMINISTRATIVE DATA OF MANUFACTURER / MEMBER........................................................................................ 4 1.3 DESCRIPTION OF THE EQUIPMENT UNDER TEST (EUT) .......................................................................................... 5 1.3.1 EUT: Type, S/N etc. ......................................................................................................................................5 1.3.2 If RF component testing only, describtion of additional used HW/SW ......................................................... 5 1.3.3 Additional EUT information For IC Canada (appendix 2)........................................................................... 6 1.3.4 EUT operating modes ................................................................................................................................... 7 1.3.5 Extreme conditions testing values................................................................................................................. 7 2. TESTSTANDARD & SUMMARY LIST OF ALL PERFORMED TEST CASES .............................................. 8 3. RF MEASUREMENT TESTING ............................................................................................................................. 9 3.1 DESCRIPTION OF TEST SET-UP................................................................................................................................ 9 3.1.1 Radiated measurements ................................................................................................................................ 9 3.1.2 Conducted measurements ............................................................................................................................. 9 3.2 REFERENCED DOCUMENTS................................................................................................................................... 10 3.3 ADDITIONAL COMMENTS..................................................................................................................................... 10 3.4 ANTENNA GAIN................................................................................................................................................... 10 3.5 CARRIER FREQUENCY SEPARATION §15.247(A)(1) .............................................................................................. 11 3.6 NUMBER OF HOPPING CHANNELS §15.247(A)(1)..................................................................................................12 3.7 TIME OF OCCUPANCY (DWELL TIME) §15.247(A)(1)(III)...................................................................................... 13 3.8 POWER SPECTRAL DENSITY (HYBRID SYSTEM IN INQUIRY MODE/PAGE SCAN) §15.247(E) ................................. 14 3.9 SPECTRUM BANDWIDTH OF A FHSS SYSTEM / 20DB BANDWITH §15.247(A)(1)................................................. 15 3.10 MAXIMUM OUTPUT POWER (CONDUCTED) § 15.247 (B)(1) .................................................................................. 17 3.11 MAX. PEAK OUTPUT POWER (RADIATED) § 15.247 (B)(1) .................................................................................... 19 3.12 BAND-EDGE COMPLIANCE OF CONDUCTED EMISSIONS §15.247 (D) ..................................................................... 20 3.13 BAND-EDGE COMPLIANCE OF RADIATED EMISSIONS §15.205 .............................................................................. 23 3.14 SPURIOUS EMISSIONS - CONDUCTED (TRANSMITTER) § 15.247 (C)(1) ................................................................ 25 3.15 SPURIOUS EMISSIONS > 30 MHZ- RADIATED (TRANSMITTER) § 15.247 (C)(1) .................................................... 27 3.16 SPURIOUS EMISSIONS - RADIATED (RECEIVER) § 15.109 ..................................................................................... 31 3.17 SPURIOUS EMISSIONS < 30 MHZ - TRANSMITTER RADIATED § 15.209 ................................................................ 32 3.17 SPURIOUS EMISSION…

Text truncated - open the document above for the full version.

CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4329-01-02/06 Date: 2006-12-04 Page 36 of 41 4 Photographs of Test Set-up Photo 1: Radiated Emissions Photo 2: Radiated Emissions CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-0 Fax: -9075 Test report no.: 2-4329-01-02/06 Date: 2006-12-04 Page 37 of 41 Photo 3: Radiated Emissions