PJMMR100-PR100Passive Tag Reader

i-scan M10202-2de-ID-B.DOC OBID  Montageanleitung / Mounting Instruction ID ISC.MR100-A / ID ISC.PR100-A (deutsch / english) Identifikation System OBID  i-scan Seite2von34FEIG ELECTRONIC GmbH D E U T S C H deutsche Versionab Seite3 english versionfrom page19 E N G L I S H MontageanleitungID ISC.MR100-A / ID ISC.PR100-A FEIG ELECTRONIC GmbHSeite3von34 D E U T S C H Ausgabe: cf/01/09/24-m10202-2de-id-b.doc © Copyright 2001 by FEIG ELECTRONIC GmbH Weitergabe sowie Vervielfältigung dieses Dokuments, Verwertung und Mitteilung ihres Inhalts sind nicht gestat- tet, soweit nicht ausdrücklich zugestanden. Zuwiderhandlung verpflichtet zu Schadenersatz. Alle Rechte für den Fall der Patenterteilung oder Gebrauchsmuster-Eintragung vorbehalten. Die Angaben in dieser Montageanleitung können ohne vorherige Ankündigung geändert werden. Alle früheren Ausga- ben verlieren mit dieser Montageanleitung ihre Gültigkeit. Die Zusammenstellung der Informationen in dieser Montageanleitung erfolgt nach bestem Wissen und Gewissen. FEIG ELECTRONIC GmbH übernimmt keine Gewährleistung für die Richtigkeit und Vollständigkeit der gemachten Angaben. Insbesondere kann FEIG ELECTRONIC GmbH nicht für Folgeschäden aufgrund fehlerhafter oder unvollständiger An- gaben haftbar gemacht werden. Die in diesem Handbuch gemachten Installationsempfehlungen gehen von günstigsten Rahmenbedingungen aus. FEIG ELECTRONIC GmbH übernimmt keine Gewähr für die einwandfreie Funktion einer OBID ® -Anlage in systemfremden Umgebungen. Da sich Fehler, trotz aller Bemühungen nie vollständig vermeiden lassen, sind wir für Hinweise jederzeit dankbar. FEIG ELECTRONIC GmbH übernimmt keine Gewährleistung dafür, dass die in diesem Dokument enthaltenden Infor- mationen frei von fremden Schutzrechten sind. FEIG ELECTRONIC GmbH erteilt mit diesem Dokument keine Lizenzen auf eigene oder fremde Patente oder andere Schutzrechte. OBID ® ist ein eingetragenes Warenzeichen der FEIG ELECTRONIC GmbH Identifikation System OBID  i-scan Seite4von34FEIG ELECTRONIC GmbH D E U T S C H Funkzulassungen Europa (CE) Die Funkanlage entspricht, bei bestimmungsgemäßer Verwendung den grundlegenden Anforde- rungen des Artikels 3 und den übrigen einschlägigen Bestimmungen der R&TTE Richtlinie 1999/5/E6 vom März 99. USA (FCC) FCC ID: PJMMR100-PR100 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Unauthorized modifications may void the authority granted under Federal communications Commission Rules permitting the operation of this device. ID ISC.MR100 : Die Zulassung nach FCC 47 CFR CH. I Part 15 gilt im Zusammenhang mit der Antenne ID ISC.ANT340/240A. MontageanleitungID ISC.MR100-A / ID ISC.PR100-A FEIG ELECTRONIC GmbHSeite5von34 D E U T S C H Inhalt 1.Sicherheits- und Warnhinweise................................................................................6 2.Leistungsmerkmale der Reader................................................................................7 2.1Leistungsmerkmale...........................................................................................................7 2.2Verfügbare Readertypen....................................................................................................7 3.Montage und Anschluß..............................................................................................8 3.1Spannungs- und Schnittstellenanschluß X2....................................................................8 3.2Versorgungsspannung......................................................................................................9 3.3Antennenanschluß X4 (nur ID ISC.MR100).....................................................................10 3.4Asynchrone Schnittstelle................................................................................................11 3.4.1Schnittstellenkonfiguration mittels Jumper..................................................................11 3.4.2RS232-Schnittstelle....................................................................................................12 3.4.3RS485 Schnittstelle.....................................................................................................13 3.4.4Adresseinstellung für Busbetrieb.................................................................................13 4.Bedien- und Anzeigeelemente.................................................................................14 4.1LED....................................................................................................................................14 5.Technische Daten.....................................................................................................15 6.Anhang......................................................................................................................17 6.1Zubehör............................................................................................................................17 6.1.1Serielles Datenkabel ID CAB.RS-A.............................................................................18 6.1.2Netzteil ID NET.12VDC...............................................................................................18 Identifikation System OBID  i-scan Seite6von34FEIG ELECTRONIC GmbH D E U T S C H 1.Sicherheits- und Warnhinweise Vor Inbetriebnahme unbedingt lesen ! •Das Gerät darf nur für den vom Hersteller vorgesehenen Zweck verwendet werden. •Die Bedienungsanleitung ist zugriffsfähig aufzubewahren und jedem Benutzer auszuhändigen. •Unzulässige Veränderungen und die Verwendung von Ersatzteilen und Zusatzeinrichtungen, die nicht vom Hersteller des Gerätes verkauft oder empfohlen werden, können Brände, elektri- sche Schläge und Verletzungen verursachen. Solche Maßnahmen führen daher zu einem Aus- schluß der Haftung und …

Text truncated - open the document above for the full version.

Professional Installation Guide ID ISC.MR100 1/1 File:ID ISCMR100-Installation Guide.DOC Date:10.09.2001 Professional Installation Guide ID ISC.MR100 for FCC Requirements Installation with FCC Approval: Electrical connection, commissioning, maintenance, measurement and calibration work on the unit is to be performed only by electrical specialists or persons with equivalent training. In countries where FCC approval is required, the ID ISC.MR100 Reader may only be operated using the antennas listed in Table 1. Changes or modifications not expressly authorized by the relevant approval body may result in revocation of the user’s operating permission. An SMA socket is provided on the circuit board for connecting the external antenna. The maximum tightening torque for the SMA sockets is 0.45 Nm. (Caution: Higher tightening torque will damage the connector.) Article No.Part No. 1663.000.00.00ID ISC.ANT340/240 Table 1: Antennas with FCC Approval

September 17, 2001 CONFIDENTIALITY REQUEST CKC Certification Services, 4933 Sierra Pines Dr., Mariposa, CA 95338, Re: Feig Electronic GmbH application with FCC ID:PJMMR100-PR100 Gentlemen: Feig Electronic GmbH Lange Strasse 4, Weilburg, Germany DE-35781, requests, pursuant to 47CFR 0.459, post grant confidentiality for portions of the material contained in this application such that the identified material will be withheld from public inspection following the grant of this authorization. This material, as indicated by request for confidentiality of the item during the electronic submission process and further identified below, includes: Circuit diagrams , block diagram, bill of material and all schematics Regards, Gerald Schmidt, Cetecom ICT Services GmbH, Germany Untertuerkheimer Strasse 6-10 D-66117 Saarbruecken

For External Photos, please see the following pages of the below mentioned documents: For Model PR100 Please refer to pages 22-24 and 27-29 of test report with the filename “2521-C.pdf” For Model MR100 Please refer to pages 20-23, & 26 of test report with the filename “2521-D.pdf”

LabelID ISC.MR100 / ID ISC.PR100 1 / 1 File :ID ISCMR100-Label.DOC Date :10.09.2001 Label ID ISC.MR100 und ID ISC.PR100 Label ID ISC.PR100Label ID ISC.MR100 Label Position : Back of the Reader (Serial Nr.) (Serial Nr.)

LabelID ISC.MR100 / ID ISC.PR100 1 / 1 File :ID ISCMR100-Label.DOC Date :10.09.2001 Label ID ISC.MR100 und ID ISC.PR100 Label ID ISC.PR100Label ID ISC.MR100 Label Position : Back of the Reader (Serial Nr.) (Serial Nr.)

For Internal Photos, please see the following pages of the below mentioned documents: For Model PR100 Please refer to pages 25-26 and 30-31 of test report with the filename “2521-C.pdf” For Model MR100 Please refer to pages 24 & 25 of test report with the filename “2521-D.pdf”

Operational DescriptionID ISC.MR100 ID ISC.PR100 1 / 1 File :ID ISCMR100-Description.DOC Date :10.09.2001 Operational Description ID ISC.MR100-A / ID ISC.PR100-A The Reader is designed for reading passive data carriers, so-called „Smart Labels“ at an operating frequency of 13.56 MHz. The reader ID ISC.MR100 is suitable for all applications in which moderate reading distances are required. Also required is an external antenna connected to the Reader. The ID ISC.PR100 is suitable for all applications which don’t require wide reader ranges. The reader contains of an internal antenna, so that is no external antenna necessary. An anti-collision function enables simultaneous reading of up to 30 transponders per second. The Reader electronics is contained in a plastic housing having an IP30 enclosure rating. The Reader comes with an asynchronous port which can be configured for RS232 or RS485. The ability to configure the port means that the Reader can also be operated on a databus with RS485 interface. The address of the Reader is configured via software.

CETECOM ICT Services GmbH Radio Satellite Communication Untertürkheimer Straße 6-10 . D-66117 SaarbrückenTelefon: +49 (0)681 598-9100Telefax: -9075 RSC11issue test report consist of31 PagesPage 1 (31) Test report no.: 2_2521-C/01 FCC Rule 15.225 ID ISC.PR100 Akkreditiertes Prüflaboratorium DAR-Registriernummer: TTI-P-G 166/98 CETECOM ICT Services GmbH Test report no.: 2_2521-C/01Issue Date: 13.06.2001Page 2 (31) Table of Contents 1 General information 1.1 Notes 1.2 Testing laboratory 1.3 Details of applicant 1.4 Application details 1.5 Test item 1.6 Test standards 2 Technical test 2.1 Summary of test results 2.2 Test report 1 General information 1.1 Notes The test results of this test report relate exclusively to the test item specified in 1.5. The CETECOM ICT Services GmbH does not assume responsibility for any conclusions and generalisations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of the CETECOM ICT Services GmbH. CETECOM ICT Services GmbH Test report no.: 2_2521-C/01Issue Date: 13.06.2001Page 3 (31) 1.2Testing laboratory CETECOM ICT Services GmbH 66117 Saarbrücken Untertürkheimer Straße 6 - 10 Deutschland Telefone: + 49 681 598 - 8411 Telefax : + 49 681 598 - 9075 E-mail: [email protected] Internet: www.cetecom.de Accredited testing laboratory DAR-registration number : TTI-P-G-166/98 1.3Details of applicant Name : FEIG ELECTRONIC GmbH Street : Lange Straße 4 City : D-35781 Weilburg-Waldhausen Country : Germany Telephone : +49 (0)6471 / 3109-0 Telefax : +49 (0)6471 / 3109-99 Contact : Mr. C.Fiedler Telephone: +49 (0)6471 / 3109-95 1.4Application details Date of receipt of application : 03.05.01 Date of receipt of test item : 03.05.01 Date of test: 03.05.01 1.5Test item Type of equipment : Passive Transponder Reader Type designation: ID ISC.PR100 Manufacturer: -applicant- Street: City: Country: Serial number: Additional informations: : Frequency: 13,56 MHz / 5K00A1D Output RF Power: 0.5 W Number of channels : 1 Antenna: Inductive loop antenna Power supply: 12-24V DC / 0.4 A ext. / 5V DC / 0.4A via USB Type of equipment : Carrier power: 0,29 mW EIRP for USB / 0,29 mW EIRP for extern DC 1.6Test standards: FCC Rule Part 15.225 CETECOM ICT Services GmbH Test report no.: 2_2521-C/01Issue Date: 13.06.2001Page 4 (31) 2 Technical test 2.1Summary of test results The tested ID system has identical layout on the PCBs, but differs in power supply. The type PR100 USB is directly powered by the USB connection. The type PR100 extern is powered by an external DC power supply between 12 and 24 Volt. No deviations from the technical specification(s) were ascertained in the course of the tests performed. Technical responsibility for area of testing : 09.05.01RSC8414 Ames.H DateSectionNameSignature 09.05.01RSC8411 Berg.M DateSectionNameSignature CETECOM ICT Services GmbH Test report no.: 2_2521-C/01Issue Date: 13.06.2001Page 5 (31) 2.2Test report TEST REPORT FCC Rule Part 15.225 Test report no. : 2_2521-C/01 CETECOM ICT Services GmbH Test report no.: 2_2521-C/01Issue Date: 13.06.2001Page 6 (31) TEST REPORT REFERENCE LIST OF MEASUREMENTS SUBCLAUSEPARAMETER TO BE MEASUREDPAGE Transmitter parameters § 15.225 (a)Field strength of fundamental7 § 15.209Emissions radiated outside of the specified frequency bands8 Band edge compliance § 15.225 (c)Frequency tolerance14 § 15.207Conducted limits16 Test equipment listing17 Photographs of the equipment19 CETECOM ICT Services GmbH Test report no.: 2_2521-C/01Issue Date: 13.06.2001Page 7 (31) Equipment under test : ID ISC.PR100 Ambient temperature : 23° °° °C Relative humidity : 37% REFERENCE NUMBER(S) OF TEST EQUIPMENT USED (for reference numbers see test equipment listing) 42 , 65 FIELD STRENGTH OF FUNDAMENTIAL SUBCLAUSE § 15.225 (a) Polarisation of the measurements for the larger power level .: vertical Measurement distance 30 m TEST CONDITIONSFIELD STRENGTH (μV/m ) Frequency (MHz)PR100 USBPR100 extern T nom ( 23 )° °° °C V nom ( 5V/17.0 )V QP: 3162 μV/m 70.0 dBμV/m QP: 668 μV/m 56.5 dBμV/m Maximum deviation from output power under extreme test conditions (dBc) -0,18-0.2 Measurement uncertainty±3dB Limits SUBCLAUSE § 15.225 (a) Frequency (MHz)Field strength (μV/m)Measurement distance (m) 13,5610,000 80 dBμV/m 30 CETECOM ICT Services GmbH Test report no.: 2_2521-C/01Issue Date: 13.06.2001Page 8 (31) Equipment under test : ID ISC.PR100 Ambient temperature : 23° °° °C Relative humidity : 37% REFERENCE NUMBER(S) OF TEST EQUIPMENT USED (for reference numbers see test equipment listing) 17 - 24 EMISSIONS RADIATEDSUBCLAUSE §15.209 Transmitter operatingModulated/Unmodulated* *(Delete whichever is inappropriate) Measurement distance see table SPURIOUS EMISSIONS LEVEL (μV/m) 13,56 MHz USB13,56 MHz extern f (MHz) DetectorLevel (μV/m) f (MHz) DetectorLevel (μV/m) f (MHz) DetectorLevel (μV/m) 40.82QP60.341.02QP93.3 81.71QP52.591.89QP75.0 98.39QP24.5100.4QP139.6 108.5QP26.6149.8QP98.8 163.6QP47.31100.0AV25.1 196.9QP40.7 392.4QP171.8 426.4QP195.0 1116.0AV50.3 1213.6AV31.6 1318.8AV28.2 Measurement uncertainty± 3dB Limits SUBCLAUSE § 15.209 Frequency (MHz)Field strength (μV/m)Measurement distance (m) 0.009 - 0.4902400/F(kHz)300 0.490 - 1.70524000/F(kHz)30 1.705 - 30.03030 30 - 881003 88 - 2161503 216 - 9602003 above 9605003 CETECOM ICT Services GmbH Test report no.: 2_2521-C/01Issue Date: 13.06.2001Page 9 (31) Equipment under test : ID ISC.PR100 Ambient temperature : 23° °° °C Relative humidity : 37% REFERENCE NUMBER(S) OF TEST EQUIPMENT USED (for reference numbers see test equipment listing) 17 - 24 EMISSIONS RADIATED>30 MHzSUBCLAUSE §15.209 ID ISC.PR100 USB PEAK QUASI-PEAKAVERAGE FREQUENCY [MHz] EMISSION LEVEL[dBuV/m] 3010010004000 20 40 60 80 100 FCC Part 15 Feig Electronic ID ISC.PR100 with computer, vertical USB power supply 3 May 2…

Text truncated - open the document above for the full version.

CETECOM ICT Services GmbH Radio Satellite Communication Untertürkheimer Straße 6-10 . D-66117 SaarbrückenTelefon: +49 (0)681 598-9100Telefax: -9075 RSC11issue test report consist of26 PagesPage 1 (26) Test report no.: 2_2521-D/01 FCC Rule 15.225 ID ISC.MR100 Akkreditiertes Prüflaboratorium DAR-Registriernummer: TTI-P-G 166/98 CETECOM ICT Services GmbH Test report no.: 2_2521-D/01Issue Date: 15.06.2001Page 2 (26) Table of Contents 1 General information 1.1 Notes 1.2 Testing laboratory 1.3 Details of applicant 1.4 Application details 1.5 Test item 1.6 Test standards 2 Technical test 2.1 Summary of test results 2.2 Test report 1 General information 1.1 Notes The test results of this test report relate exclusively to the test item specified in 1.5. The CETECOM ICT Services GmbH does not assume responsibility for any conclusions and generalisations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of the CETECOM ICT Services GmbH. CETECOM ICT Services GmbH Test report no.: 2_2521-D/01Issue Date: 15.06.2001Page 3 (26) 1.2Testing laboratory CETECOM ICT Services GmbH 66117 Saarbrücken Untertürkheimer Straße 6 - 10 Deutschland Telefone: + 49 681 598 - 8411 Telefax : + 49 681 598 - 9075 E-mail: [email protected] Internet: www.cetecom.de Accredited testing laboratory DAR-registration number : TTI-P-G-166/98 1.3Details of applicant Name : FEIG ELECTRONIC GmbH Street : Lange Straße 4 City : D-35781 Weilburg-Waldhausen Country : Germany Telephone : +49 (0)6471 / 3109-0 Telefax : +49 (0)6471 / 3109-99 Contact : Mr. C.Fiedler Telephone: +49 (0)6471 / 3109-95 1.4Application details Date of receipt of application : 03.05.01 Date of receipt of test item : 03.05.01 Date of test: 03.05.01 1.5Test item Type of equipment : Passive Transponder Reader Type designation: ID ISC.MR100 Manufacturer: -applicant- Street: City: Country: Serial number: Additional informations: : Frequency: 13,56 MHz / 5K00A1D Cond. output RF Power: 1.0 W Number of channels : 1 Antenna: Inductive loop antenna ID ISC.ANT340/240 Power supply: 12-24V DC Type of equipment : Carrier power: 1.5 mW EIRP 1.6Test standards: FCC Rule Part 15.225 CETECOM ICT Services GmbH Test report no.: 2_2521-D/01Issue Date: 15.06.2001Page 4 (26) 2 Technical test 2.1Summary of test results No deviations from the technical specification(s) were ascertained in the course of the tests performed. Technical responsibility for area of testing : 09.05.01RSC8414 Ames.H DateSectionNameSignature 09.05.01RSC8411 Berg.M DateSectionNameSignature CETECOM ICT Services GmbH Test report no.: 2_2521-D/01Issue Date: 15.06.2001Page 5 (26) 2.2Test report TEST REPORT FCC Rule Part 15.225 Test report no. : 2_2521-D/01 CETECOM ICT Services GmbH Test report no.: 2_2521-D/01Issue Date: 15.06.2001Page 6 (26) TEST REPORT REFERENCE LIST OF MEASUREMENTS SUBCLAUSEPARAMETER TO BE MEASUREDPAGE Transmitter parameters § 15.225 (a)Field strength of fundamental7 § 15.209Emissions radiated outside of the specified frequency bands8 Band edge compliance § 15.225 (c)Frequency tolerance12 § 15.207Conducted limits14 Test equipment listing15 Photographs of the equipment17 CETECOM ICT Services GmbH Test report no.: 2_2521-D/01Issue Date: 15.06.2001Page 7 (26) Equipment under test : ID ISC.MR100 Ambient temperature : 23° °° °C Relative humidity : 37% REFERENCE NUMBER(S) OF TEST EQUIPMENT USED (for reference numbers see test equipment listing) 42 , 65 FIELD STRENGTH OF FUNDAMENTIAL SUBCLAUSE § 15.225 (a) Polarisation of the measurements for the larger power level .: vertical Measurement distance 30 m TEST CONDITIONSFIELD STRENGTH (μV/m ) Frequency (MHz)MR100 T nom ( 23 )° °° °C V nom ( 17.0 )V QP: 9250 μV/m 79.3 dBμV/m Maximum deviation from output power under extreme test conditions (dBc) -0,18 Measurement uncertainty±3dB Limits SUBCLAUSE § 15.225 (a) Frequency (MHz)Field strength (μV/m)Measurement distance (m) 13,5610,000 80 dBμV/m 30 CETECOM ICT Services GmbH Test report no.: 2_2521-D/01Issue Date: 15.06.2001Page 8 (26) Equipment under test : ID ISC.MR100 Ambient temperature : 23° °° °C Relative humidity : 37% REFERENCE NUMBER(S) OF TEST EQUIPMENT USED (for reference numbers see test equipment listing) 17 - 24 EMISSIONS RADIATEDSUBCLAUSE §15.209 Transmitter operatingModulated/Unmodulated* *(Delete whichever is inappropriate) Measurement distance see table SPURIOUS EMISSIONS LEVEL (μV/m) 13,56 MHz f (MHz) DetectorLevel (μV/m) f (MHz) DetectorLevel (μV/m) f (MHz) DetectorLevel (μV/m) 40.82QP31.6 54.46QP18.8 67.83QP88.1 81.71QP18.8 95.08QP84.1 122.6QP139.6 135.8QP53.1 149.8QP133.4 163.6QP47.9 176.9QP56.9 231.5QP80.4 Measurement uncertainty± 3dB Limits SUBCLAUSE § 15.209 Frequency (MHz)Field strength (μV/m)Measurement distance (m) 0.009 - 0.4902400/F(kHz)300 0.490 - 1.70524000/F(kHz)30 1.705 - 30.03030 30 - 881003 88 - 2161503 216 - 9602003 above 9605003 CETECOM ICT Services GmbH Test report no.: 2_2521-D/01Issue Date: 15.06.2001Page 9 (26) Equipment under test : ID ISC.MR100 Ambient temperature : 23° °° °C Relative humidity : 37% REFERENCE NUMBER(S) OF TEST EQUIPMENT USED (for reference numbers see test equipment listing) 17 - 24 EMISSIONS RADIATED>30 MHzSUBCLAUSE §15.209 ID ISC.MR100 PEAKQUASI-PEAK FREQUENCY [MHz] EMISSION LEVEL[dBuV/m] 3010010004000 20 40 60 80 100 FCC Part 15 Feig Electronic Antenne Model 1 stehend quer TX mit Karte und Laptop 8 Jun 2001 10:29:47CETECOM ICT SERVICES GMBH FCC Part 15.209 hp hp CETECOM ICT Services GmbH Test report no.: 2_2521-D/01Issue Date: 15.06.2001Page 10 (26) Equipment under test : ID ISC.MR100 Ambient temperature : 23° °° °C Relative humidity : 37% REFERENCE NUMBER(S) OF TEST EQUIPMENT USED (for reference numbers see test equipment listing) 17 - 24 EMISSIONS RADIATED<30 MHzSUBCLAUSE §15.209 ID ISC.MR100 10 20 30 40 50 60 70 80 90…

Text truncated - open the document above for the full version.

For Test Setup Photos, please see the following pages of the below mentioned documents: For Model PR100 Please refer to pages 19-21 of test report with the filename “2521-C.pdf” For Model MR100 Please refer to pages 17-19 of test report with the filename “2521-D.pdf”