PJMMRU200UHF Reader

MONTAGE INSTALLATION final public (B) 2007-12-20 M70201-0de-ID-B.doc OBID i-scan ® ID ISC.MRU200 MidRange Reader UHF (deutsch / english) OBID i-scan ® MontageID ISC.MRU200 FEIG ELECTRONIC GmbHSeite 2 von 53M70201-0de-ID-B.doc D E U T S C H deutsche Version ab Seite 3 english version from page 30 E N G L I S H OBID i-scan ® MontageID ISC.MRU200 FEIG ELECTRONIC GmbHSeite 3 von 53M70201-0de-ID-B.doc D E U T S C H Hinweis © Copyright 2007 by FEIG ELECTRONIC GmbH Lange Straße 4 D-35781 Weilburg-Waldhausen Tel.: +49 6471 3109-0 http://www.feig.de Alle früheren Ausgaben verlieren mit dieser Ausgabe ihre Gültigkeit. Die Angaben in diesem Dokument können ohne vorherige Ankündigung geändert werden. Weitergabe sowie Vervielfältigung dieses Dokuments, Verwertung und Mitteilung ihres Inhalts sind nicht gestattet, soweit nicht ausdrücklich zugestanden. Zuwiderhandlung verpflichtet zu Schadenersatz. Alle Rechte für den Fall der Patenterteilung oder Gebrauchsmuster-Eintragung vorbehalten. Die Zusammenstellung der Informationen in diesem Dokument erfolgt nach bestem Wissen und Gewissen. FEIG ELECTRONIC GmbH übernimmt keine Gewährleistung für die Richtigkeit und Vollständigkeit der An- gaben in diesem Dokument. Insbesondere kann FEIG ELECTRONIC GmbH nicht für Folgeschäden auf Grund fehlerhafter oder unvollständiger Angaben haftbar gemacht werden. Da sich Fehler, trotz aller Bemü- hungen nie vollständig vermeiden lassen, sind wir für Hinweise jederzeit dankbar. Die in diesem Dokument gemachten Installationsempfehlungen gehen von günstigsten Rahmenbedingun- gen aus. FEIG ELECTRONIC GmbH übernimmt keine Gewähr für die einwandfreie Funktion in systemfrem- den Umgebungen. FEIG ELECTRONIC GmbH übernimmt keine Gewährleistung dafür, dass die in diesem Dokument enthal- tenden Informationen frei von fremden Schutzrechten sind. FEIG ELECTRONIC GmbH erteilt mit diesem Dokument keine Lizenzen auf eigene oder fremde Patente oder andere Schutzrechte. OBID ® und OBID i-scan ® ist ein eingetragenes Warenzeichen der FEIG ELECTRONIC GmbH OBID i-scan ® MontageID ISC.MRU200 FEIG ELECTRONIC GmbHSeite 4 von 53M70201-0de-ID-B.doc D E U T S C H Inhalt 1Sicherheits- und Warnhinweise - vor Inbetriebnahme unbedingt lesen6 2Leistungsmerkmale7 2.1Verfügbare Readertypen...............................................................................................7 2.2Lieferumfang..................................................................................................................7 3Montage8 3.1Kabelverschraubungen.................................................................................................8 3.2Dichtverschlüsse...........................................................................................................9 3.3Deckelhalter ...................................................................................................................9 3.4Designblenden.............................................................................................................10 4Anschlussklemmen und -buchsen11 4.1Versorgungsspannung ...............................................................................................12 4.2Antennenanschlüsse ..................................................................................................13 4.3Schnittstellen ...............................................................................................................14 4.3.1 RS232-Schnittstelle .......................................................................................................14 4.3.2 RS485- / RS422-Schnittstelle (ID ISC.MRU200-USB) ..................................................15 4.3.3 Ethernet-Schnittstelle (ID ISC.MRU200-E)....................................................................16 4.3.4 USB-Schnittstelle (ID ISC.MRU200-USB).....................................................................17 4.4Eingänge ......................................................................................................................17 4.5Ausgänge .....................................................................................................................19 4.5.1 Optokoppler ...................................................................................................................19 4.5.2 Relais ............................................................................................................................20 5Bedien- und Anzeigeelemente21 5.1LEDs .............................................................................................................................21 OBID i-scan ® MontageID ISC.MRU200 FEIG ELECTRONIC GmbHSeite 5 von 53M70201-0de-ID-B.doc D E U T S C H 5.2T1: Reset-Taster ..........................................................................................................21 5.3J1-J8: Schnittstellenkonfiguration.............................................................................22 5.4X60: Default-Einstellung .............................................................................................23 6Technische Daten24 6.1Zulassung ....................................................................................................................26 6.1.1 Europa (CE) ..................................................................................................................26 6.1.2 USA (FCC) ....................................................................................................................26 OBID i-scan ® MontageID ISC.MRU200 FEIG ELECTRONIC GmbHSeite 6 von 53M70201-0de-ID-B.doc D E U T S C H 1 Sicherheits- und Warnhinweise - vor Inbetriebnahme unbedingt lesen • Das Gerät darf nur für den vom Hersteller vorgesehenen Zweck verwendet werden. • Beim Aufstellen des Gerätes im Geltungsbereich der FCC 47 CFR Part 15 ist ein Mindestabstand von 20 cm zwischen Antenne und menschlichem Körper zu gewährleisten. • Die Bedienungsanleitung ist zugriffsfähig aufzubewahren und jedem Benutzer auszuhändige…

Text truncated - open the document above for the full version.

CONFIDENTIALITY REQUEST Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 November 05, 2007 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, FEIG ELECTRONIC GmbH requests confidentiality for the following products: FCC ID Number Product Title/Model PJMMRU200ID ISC.MRU200 For the product stated above, we request that the following information be held confidential: 1. Circuit diagrams, BOM, and PCBs submitted as Equipment Authorization Electronic Filing attachment: “ MRU200 ‐ Schematic.pdf” “ MRU200 ‐ BOM‐USB.pdf” “ MRU200 ‐ BOM‐E.pdf” “ MRU200 ‐ PCB.pdf” 2. Block diagram submitted as Equipment Authorization Electronic Filing attachment: “ MRU200 ‐ Block Diagram.pdf” 3. Operational description submitted as Equipment Authorization Electronic F iling attachment: “ MRU200 ‐ Product Description.pdf”. The above exhibits contain FEIG ELECTRONIC GmbH trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our mobile handset. This material is not customarily available to the general public and we request that it be withheld from public inspection. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name:Andreas Wennrich Company:FEIG ELECTRONIC GmbH Address:Lange Strasse 4 D‐35781 Weilburg‐Waldhausen Germany Phone:+49 6471 3109 468 Email:[email protected]

CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-8412 Fax: -8484 Test report no.: 2-4765-01-03/07 Date: 2007-12-20 Page 66 of 73 5 Photographs of EUT Photo 1: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-8412 Fax: -8484 Test report no.: 2-4765-01-03/07 Date: 2007-12-20 Page 67 of 73 Photo 2:

CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-8412 Fax: -8484 Test report no.: 2-4765-01-03/07 Date: 2007-12-20 Page 72 of 73 Photo 7: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-8412 Fax: -8484 Test report no.: 2-4765-01-03/07 Date: 2007-12-20 Page 73 of 73 Photo 8:

FCC ID: PJM MRU200 FEIG ELECTRONIC GmbH1/1 Labels ID ISC.MRU200 ID ISC.MRU200 (USB Version): 50 x 25 mm 2 ID ISC.MRU200 (Ethernet Version): 50 x 25 mm 2 Position of the Label on the case:

CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-8412 Fax: -8484 Test report no.: 2-4765-01-03/07 Date: 2007-12-20 Page 69 of 73 Photo 4: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-8412 Fax: -8484 Test report no.: 2-4765-01-03/07 Date: 2007-12-20 Page 70 of 73 Photo 5: CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-8412 Fax: -8484 Test report no.: 2-4765-01-03/07 Date: 2007-12-20 Page 71 of 73 Photo 6:

CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-8412 Fax: -8484 Test report no.: 2-4765-01-03/07 Date: 2007-12-20 Page 23 of 73 MPE calculation These equations are generally accurate in the far field of an antenna but will over predict power density in the near field, where they could be used for making a “worst case” prediction. S = PG/4πR 2 where S = power density ( in appropriate units, e.g. mW/cm 2 ) P = power input to the antenna (in appropriate units e.g. mW) G = power gain of the antenna in the direction of interest relative to the isotropic radiator R = distance to the center of radiation of the antenna (appropriate units e.g. cm) Or S = EIRP/4πR 2 where EIRP = equivalent isotropically radiated power Calculation: (Calculated for max. EIRP) EIRP: 30.9 dBm = 1230 mW calculated at distance of 20 cm: power density = 1230 /4π20 2 = 0.245 mW/ cm 2 Limit: 1mW/ cm 2 is the reference level for general public exposure according to the OET Bulletin 65, Edition 97-01 Table 1.

CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-8412 Fax: -8484 Test report no.: 2-4765-01-03/07 Date: 2007-12-20 Page 1 of 73 Recognized by the Federal Communications Commission Anechoic chamber registration no.: 90462 (FCC) Anechoic chamber registration no.: IC 3463A-1 TCB ID: DE 0001 Accredited by the German Accreditation Council DAR–Registration Number DAT-P-176/94-D1 Accredited Bluetooth ® Test Facility (BQTF) Test report no. : 2-4765-01-03/07 Applicant : Feig Electronic GmbH Type : ID ISC.MRU200 Test Standard : FCC Part 15.247 RSS-210 Issue 7 FCC ID : PJMMRU200 Certification No. IC : -/- The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Cetecom ICT is under license CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-8412 Fax: -8484 Test report no.: 2-4765-01-03/07 Date: 2007-12-20 Page 2 of 73 Table of contents 1. ADMINISTRATIVE DATA ...................................................................................................................................... 3 1.1. ADMINISTRATIVE DATA OF THE TEST FACILITY..................................................................................................... 3 1.1.1 Identification of the testing laboratory ......................................................................................................... 3 1.1.2 Organizational items..................................................................................................................................... 3 1.1.3 Applicant ́s details ........................................................................................................................................ 4 1.2 ADMINISTRATIVE DATA OF MANUFACTURER / MEMBER........................................................................................ 4 1.3 DESCRIPTION OF THE EQUIPMENT UNDER TEST (EUT) .......................................................................................... 5 1.3.1 EUT: Type, S/N etc. ...................................................................................................................................... 5 1.3.2 If RF component testing only, describtion of additional used HW/SW ......................................................... 5 1.3.3 Additional EUT information For IC Canada (appendix 2)...........................................................................6 1.3.4 EUT operating modes ................................................................................................................................... 7 1.3.5 Extreme conditions testing values................................................................................................................. 7 2. TESTSTANDARD & SUMMARY LIST OF ALL PERFORMED TEST CASES .............................................. 8 3. RF MEASUREMENT TESTING ............................................................................................................................. 9 3.1 DESCRIPTION OF TEST SET-UP................................................................................................................................9 3.1.1 Radiated measurements ................................................................................................................................ 9 3.1.2 Conducted measurements ............................................................................................................................. 9 3.2 REFERENCED DOCUMENTS................................................................................................................................... 10 3.3 ADDITIONAL COMMENTS..................................................................................................................................... 10 3.5 CARRIER FREQUENCY SEPARATION §15.247(A)(1)(I) .......................................................................................... 11 3.6 NUMBER OF HOPPING CHANNELS §15.247(A)(1)(I).............................................................................................. 12 3.7 TIME OF OCCUPANCY (DWELL TIME) §15.247(A)(1)(I)........................................................................................ 13 3.8 POWER SPECTRAL DENSITY §15.247(E)........................................................................................................... 15 3.9 SPECTRUM BANDWIDTH OF A FHSS SYSTEM / 20DB BANDWITH §15.247(A)(1)................................................. 16 3.10 MAXIMUM OUTPUT POWER (CONDUCTED) § 15.247 (B)(2) .................................................................................. 19 3.11 MAX. PEAK OUTPUT POWER (RADIATED) § 15.247 (B)(2) .................................................................................... 22 3.12 BAND-EDGE COMPLIANCE OF CONDUCTED EMISSIONS §15.247 (D) ..................................................................... 24 3.13 BAND-EDGE COMPLIANCE OF RADIATED EMISSIONS §15.205............................................................................ 28 3.15 SPURIOUS EMISSIONS > 30 MHZ- RADIATED (TRANSMITTER) § 15.247 (C)(1) .................................................... 33 3.16 SPURIOUS EMISSIONS - RADIATED (RECEIVER) § 15.109 ..................................................................................... 53 3.17 SPURIOUS EMISSIONS < 30 MHZ - TRANSMITTER RADIATED § 15.209 ................................................................ 54 3.17 SPURIOUS EMISSIONS < 30 MHZ - TRANSMITTER RADIATED § 15.209 ................................................................ 54 3.18 CONDUCTED EMISSIONS <30 MHZ § 15.107/207 ................................................................................................ 56 4 PHOTOGRAPHS OF TEST SET-UP ...................................................................................…

Text truncated - open the document above for the full version.

CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-8412 Fax: -8484 Test report no.: 2-4765-01-03/07 Date: 2007-12-20 Page 61 of 73 4 Photographs of Test Set-up Photo 1: Radiated Emissions with housing CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-8412 Fax: -8484 Test report no.: 2-4765-01-03/07 Date: 2007-12-20 Page 62 of 73 Photo 2: Radiated Emissions with housing CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-8412 Fax: -8484 Test report no.: 2-4765-01-03/07 Date: 2007-12-20 Page 63 of 73 Photo 3: Radiated Emissions without housing CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-8412 Fax: -8484 Test report no.: 2-4765-01-03/07 Date: 2007-12-20 Page 64 of 73 Photo 4: Radiated Emissions without housing CETECOM ICT Services GmbH Untertürkheimer Str. 6-10, 66117 Saarbruecken Phone: +49 (0) 681 598-0 Fax: -9075 RSC-Laboratory Phone: +49 (0) 681 598-8412 Fax: -8484 Test report no.: 2-4765-01-03/07 Date: 2007-12-20 Page 65 of 73 Photo 5: Conducted Emissions