PPT277T5LAMPT8-T5 Converter Fitting

“WARNING” – Risk of fire or electric shock. Kit installation requires knowledge of fluorescent lighting luminaries electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician. “WARNING – Risk of Fire or electric shock. Install this kit only in the luminaries that has the construction features and dimensions shown in the photographs and/or drawings” “Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation” “WARNING – To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects” “WARNING – After the luminaire has been modified, it can no longer accept original lamp(s). Have a label affixed (provided by the retrofit manufacturer), indicating the luminaire has been modified and can no longer operate the original intended lamp(s). “WARNING” – Risk of fire or electric shock. Kit installation requires knowledge of fluorescent lighting luminaries electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician. “WARNING – Risk of Fire or electric shock. Install this kit only in the luminaries that has the construction features and dimensions shown in the photographs and/or drawings” “Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation” “WARNING – To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects” “WARNING – After the luminaire has been modified, it can no longer accept original lamp(s). Have a label affixed (provided by the retrofit manufacturer), indicating the luminaire has been modified and can no longer operate the original intended lamp(s). FCC statement: This Product may cause interference to radio equipment and should not be installed near maritime safety communications equipment or other critical navigation or communication equipment operating between 0.009-30 MHz. This device complies with Part 18 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference (2) this device must accept any interference received, including interference that may cause undesired operation.

ACL Marketing Ltd. Address: Flat 3B，Pilkem House 45-51 Pilkem Street， Ya u M a Te i，HONG KONG Phone: 86-18922838182 FAX : 852-24923009 AGENCY AUTHORIZATION LETTER FCC ID: PPT277T5LAMP Date:2012/9/17 To whom it may concern: We, the undersigned, hereby authorize ECMG to act on our behalf , as our agent ,in the following matters related to the FCC approval of our products: report submittal, related correspondence, the signing of all documents relating to the matters. and any other lawful activity necessary to obtain such certification. Any act carried out by ECMG within the scope of this authorization shall have the same effects as our own. This authorization shall expire 6 months from original date , if you have any question regarding the authorization , please don’t hesitate to contact us , thank you. Walt Chan Phone : 86-18922838182 FAX : 852-24923009 E-Mail: [email protected]

ACL Marketing Ltd. Date:2012/9/17 Federal communications commission Authorization and Evaluation Division FCC ID: PPT277T5LAMP Confidentiality Request Pursuant to section 0.457 and 0.459 of the commission’s rules, the applicant hereby requests confidential treatment of information accompanying this application as outline below: 1 Schematics 2 Block diagram 3 Operational description The above materials contain trade secrets and proprietary information not customarily released to the public, the public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to rule 0.457, disclosure of this application and all accompanying documentation will not be made before the date of the grant for this application. Sincerely, Walt Chan ACL Marketing Ltd Phone : 86-18922838182 FAX : 852-24923009 E-Mail: [email protected]

EUT External Photos: EUT- Exterior View #1 EUT- Exterior View #2 EUT- Exterior View #3

Proposed FCC Label Format: ACL Marketing Ltd. T8 ‐ T5 Converter Fitting Model Number: 120V ‐ T5 ‐ 23WHEB Rated Input: 100V ‐ 120V Rated Power: 23W FCC ID ： PPT277T5LAMP SUITABLE FOR DRY LOCATIONS LUMINAIRE CONVERSION, RETROFIT WITH RESPECT ONLY TO RISK OF FIRE or RISK OF SHOCK FOR USE ONLY WITH FLUORESCENT LUMINAIRES The retrofit assembly is accepted as a component of a fluorescent luminaire where the suitability of the combination shall be determined by CSA or authorities having jurisdiction Label location

EUT Internal Photos: Inside View of 120V-T5-23WHEB Inside View of 240V-T5-23WHEB Inside View of 277V-T5-23WHEB PCB Board top view of 120V-T5-23WHEB PCB Board bottom view of 120V-T5-23WHEB PCB Board top view of 277V-T5-23WHEB PCB Board bottom view of 277V-T5-23WHEB PCB Board top view of 240V-T5-23WHEB PCB Board bottom view of 240V-T5-23WHEB

www.ecmg-global.net FCC TEST REPORT On Model Name: T8-T5 Converter Fitting Model Number: 120V-T5-23WHEB,240V-T5-23WHEB, 277V-T5-23WHEB Brand Name: LM (Light Master) FCC ID Number: PPT277T5LAMP Prepared for ACL Marketing Ltd According to FCC 47 CFR Part 18(2012) Test Report #: ACL-1205-10824-FCC Tested by: ECMG Engineer Company Name Reviewed by: ECMG Senior Engineer Company Name QC Manager: ECMG QC Manager Company Name Test Report Released by: September 19 th, , 2012 ⎯⎯⎯⎯⎯⎯⎯ ⎯⎯⎯⎯⎯⎯⎯ Swall Zhang Date Test Location Tests performed in a Certified ANSI Semi-Anechoic Chamber and Shielded Room. Test Site Location (1): Shenzhen Academy of Metrology and quality Inspection. Bldg. of Metrology & Quality Inspection, Longzhu Road,Nanshan District,Shenzhen, Guangdong, China. Tel: (86)-755-26941599 Fax: (86)-755-26941615 Test Facility The test facility was recognized, certified, or accredited by the following organizations: CNAL- LAB Code: L0579 SMQ EMC Laboratory has been assessed and in compliance with CNAL/AC01:2002 accreditation criteria for testing laboratories (identical to ISO/IEC 17025:2005 General Requirements)for the Competence of Testing Laboratories. FCC -Registration No.: 979748 SMQ EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC was maintained in our files. Tests performed in a Certified ANSI Semi-Anechoic Chamber and Shielded Room. Test Site Location (2): NTEK Testing Technology Co.,Ltd. Fenda Science Park,Sanwei Community,Xixiang Street,Bao'an Tel: (86)-755-61156588 Fax: (86)-755-61156599 Test Facility The test facility was recognized, certified, or accredited by the following organizations: CNAL- LAB Code: L5516 NTEK EMC Laboratory has been assessed and in compliance with CNAL/AC01:2002 accreditation criteria for testing laboratories (identical to ISO/IEC 17025:2005 General Requirements)for the Competence of Testing Laboratories. FCC -Registration No.: 238937 NTEK EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC was maintained in our files. List of Attached Files Exhibit Type File Description File Name Test Report Test Report PPT277T5LAMP _Test report.pdf Operation Description Technical Description PPT277T5LAMP _operation description.pdf External Photos External Photos PPT277T5LAMP _External Photos Internal Photos Internal Photos PPT277T5LAMP _Internal Photos Block Diagram Block Diagram PPT277T5LAMP _Block Diagram.pdf Schematics Circuit Diagram PPT277T5LAMP _Schematics.pdf ID Label/Location Label and Location PPT277T5LAMP _Label & Location.pdf User Manual User Manual PPT277T5LAMP _User Manual.pdf Test set-up photos Test setup photos PPT277T5LAMP _Test Set-up Photos Table of Contents GOVERNMENT DISCLAIMER NOTICE ____________________________________________ 1 REPRODUCTION CLAUSE _______________________________________________________ 1 OPINIONS AND INTERPRETATIONS _____________________________________________ 1 STATEMENT OF MEASUREMENT UNCERTAINTY _________________________________ 1 ADMINISTRATIVE DATA ________________________________________________________ 2 EUT DESCRIPTION ______________________________________________________________ 3 EUT MODEL DERIVED___________________________________________________________ 3 TEST SUMMARY ________________________________________________________________ 4 TEST MODE JUSTIFICATION ____________________________________________________ 5 EUT EXERCISE SOFTWARE ______________________________________________________ 5 EQUIPMENT MODIFICATION ____________________________________________________ 5 EUT SAMPLE PHOTOS __________________________________________________________ 6 TEST SYSTEM DETAILS ________________________________________________________ 12 ATTACHMENT 1 - CONDUCTED EMISSION TEST RESULTS ______________________ 14 ATTACHMENT 2 - RADIATED EMISSION TEST RESULTS_________________________ 21 FCC Test Report #: ACL-1205-10824-FCC Prepared for ACL Marketing Ltd. Prepared by ECMG Electronic Technical Testing Corp (Shenzhen) Page 1 of 26 Government Disclaimer Notice When government drawing, specification, or other data are used for any purpose other than in connection with a definitely related government procurement operation, the United States Government thereby incurs no responsibility nor any obligation whatsoever; and the fact that the Government may have formulated, furnished, or in any way supplied the said drawing, specifications, or other data, is not to be regarded by implication or otherwise in any manner licensing the holder or any other person or corporation, or conveying any rights or permission to manufacture, use, or sell patented invention that may in any way be related thereto.This report must not be used to claim product endorsement by NVLAP or any agency of the U.S. Government. Reproduction Clause Any reproduction of this document must be done in full. No single part of this document may be reproduced without permission from ECMG Electronic Technical Testing Corp (Shenzhen). Opinions and Interpretations This test report relates to the abovementioned equipment under test (EUT).Without the permission of ECMG Electronic Technical Testing Corp (Shenzhen) Test Lab this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark on this or similar products. The manufacturer has sole responsibility of continued compliance of the device. Statement of Measurement Uncertainty The data and results referenced in the document are true and accurate. The reader is cautioned that there may be errors within the calibration limits of the equipment and facilities that can account for a nominal measurement error. Furthermore, component and process variability of devices similar to that tested may result in additional deviation. FCC Test Report #: ACL-1205-10824-FCC Prepared for ACL Marke…

Text truncated - open the document above for the full version.

Test Set-up Photos: Conducted Emission Test Set-up Radiated Emission Test Set-up