PR4FLUSHP2YHousehold microwave oven

W11595045A MICROWAVEOVEN HOOD COMBINATION OWNER’S MANUAL MANUAL DEL PROPIETARIO DE LA COMBINACIÓN DE HORNO DE MICROONDAS Y CAMPANA Table of Contents/Índice MICROWA VE OVEN SAFETY.............................................2 Microwave Oven Safety ..................................................2 MICROWAVE OVEN MAINTENANCE AND CARE..................4 General Cleaning...........................................................4 INSTALLATION INSTRUCTIONS........................................4 REQUIREMENTS.............................................................4 Tools and Parts .............................................................4 Location Requirements ...................................................6 Product Dimensions .......................................................6 Installation Dimensions ...................................................6 Electrical Requirements ..................................................7 INSTALLATION...............................................................7 Prepare Microwave Oven Hood Combination.......................7 Installation Types...........................................................8 Find the Cardboard Plate.................................................8 Find the Wall Stud(s) ......................................................8 Find the Flush Point........................................................9 Mark Upper Cabinet ..................................................... 10 Mark Rear Wall............................................................ 11 Drill holes in Upper Cabinet............................................ 12 Drill holes in Rear Wall .................................................. 12 Attach Mounting Plate to Wall ......................................... 13 Rotate Blower Motor..................................................... 14 Install Damper Assembly............................................... 17 Install the Microwave Oven ............................................ 17 Complete Installation .................................................... 18 VENTING DESIGN SPECIFICATIONS................................ 19 Venting Design Specifications......................................... 19 SEGURIDAD DEL HORNO DE MICROONDAS.................... 21 Seguridad del horno de microondas................................. 21 MANTENIMIENTO Y CUIDADO DEL HORNO MICROONDAS.............................................................. 23 Limpieza general ......................................................... 23 INSTRUCCIONES DE INSTALACIÓN................................ 23 REQUISITOS................................................................. 23 Herramientas y piezas .................................................. 23 Requisitos de ubicación ................................................ 25 Dimensiones del producto ............................................. 25 Dimensiones de instalación............................................ 25 Requisitos eléctricos..................................................... 26 INSTALACIÓN............................................................... 26 Preparar la combinación de horno de microondas y campana.................................................................... 26 Tipos de instalación...................................................... 27 Encontrar plantilla de cartón........................................... 27 Encontrar las vigas de pared .......................................... 27 Encontrar el punto al ras................................................ 28 Marcar gabinete superior............................................... 29 Marque la pared posterior.............................................. 30 Taladrar los orificios en el gabinete superior....................... 31 Taladre orificios en la pared posterior ............................... 31 Fije la placa de montaje a la pared................................... 32 Gire el motor del soplador.............................................. 33 Instale el conjunto de la compuerta.................................. 36 Instalación del horno de microondas ................................ 37 Finalización de la instalación .......................................... 38 ESPECIFICACIONES PARA EL DISEÑO DE LA VENTILACIÓN............................................................... 39 Especificaciones para el diseño de la ventilación ................ 39 IMPORTANT: Save for local electrical inspector’s use. IMPORTANTE: Guarde para tener a disposición del inspector de electricidad local. 2 MICROW AVE OVEN SAFETY Y our safety and the safety of others are very important. W e have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean: D ANGER Y ou can be killed or seriously injured if you don't immediately follow instructions. WARNING Y ou can be killed or seriously injured if you don’t follow instructions. All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed. IMPORT ANT SAFETY INSTRUCTIONS When using electrical appliances basic safety precautions should be followed, including the following: W ARNING: T o reduce the risk of burns, electric shock, fire, injury to persons, or exposure to excessive microwave energy: �Read all instructions before using the appliance. �Read and follow the specific "PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY" found in this manual. �This appliance must be grounded. Connect only to properly grounded outlet. See “GROUNDING INSTRUCTIONS” found in this section. �Install or locate this appliance only in accordance with the provided I…

Text truncated - open the document above for the full version.

CFR 47 §2.911(d)(5)(i) Attestation Letter Whirlpool Microwave Products Development Limited. Address: 17th Fl, Elite Centre,22 Hung To Rd,Kwun Tong, Hong Kong Email: [email protected] Tel: 8675583811688 Attestation Letter Date: 2024-01-26 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i) Filing FCC ID: PR4FLUSHP2Y Whirlpool Microwave Products Development Limited. certifies that the equipment for which authorization is sought, is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signature Bobo Lin Approbation Manager

U.S. AGENT LETTER OF ATTESTATION Date: 2024-01-26 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(7) Filing FCC ID: PR4FLUSHP2Y Whirlpool Microwave Products Development Limited. certifies that, as of the date of the filing of the application, Whirlpool Corporation is our designated U.S. agent for service of process for the above referenced FCC ID. Whirlpool Microwave Products Development Limited. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Whirlpool Corporation accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Name: Whirlpool Corporation Address: 2000 M63 North Benton Harbor, MI 49022 United States FRN: 0011042405 Tel.: 918-697-1336 Email: [email protected] Signed by (printed name): Cammie Rhodes Signature: Applicant: Whirlpool Microwave Products Development Limited. Address: 17th Fl, Elite Centre,22 Hung To Rd,Kwun Tong, Hong Kong FRN: 0012635595 Tel: 8675583811688 Email: [email protected] Signed by (printed name): Bobo Lin Signature:

CFR 47 §2.911 (d)(5)(ii) Attestation Letter Whirlpool Microwave Products Development Limited. Address: 17th Fl, Elite Centre,22 Hung To Rd,Kwun Tong, Hong Kong Email: [email protected] Tel: 8675583811688 Attestation Letter Date: 2024-01-29 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(ii) Filing FCC ID: PR4FLUSHP2Y Whirlpool Microwave Products Development Limited. certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signature Name: Bobo Lin Title: Approbation Manager

Whirlpool Microwave Products Development Limited. Address: 17th Fl, Elite Centre,22 Hung To Rd,Kwun Tong, Hong Kong Email: [email protected] Tel: 8675583811688 QA-FR-170-B 7/29/2014 FCC Authorization Date: 2024-01-26 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, Whirlpool Microwave Products Development Limited. the undersigned, hereby authorizes World Alliance Testing and Certification (Shenzhen) Co., Ltd to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by World Alliance Testing and Certification (Shenzhen) Co., Ltd on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely, Signature Bobo Lin Approbation Manager

Whirlpool Microwave Products Development Limited. Address: 17th Fl, Elite Centre,22 Hung To Rd,Kwun Tong, Hong Kong Email: [email protected] Tel: 8675583811688 FCC Confidential Authorization Date: 2024-01-26 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: PR4FLUSHP2Y In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Whirlpool Microwave Products Development Limited. hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature Bobo Lin Approbation Manager

Report No.: RWAO202400008 Page 1 of 4 EUT EXTERNAL PHOTOGRAPHS Report No.: RWAO202400008 Page 2 of 4 Report No.: RWAO202400008 Page 3 of 4 Report No.: RWAO202400008 Page 4 of 4

Label Label Location Information

Report No.: RWAO202400008 Page 1 of 20 EUT INTERNAL PHOTOGRAPHS Report No.: RWAO202400008 Page 2 of 20 Report No.: RWAO202400008 Page 3 of 20 Report No.: RWAO202400008 Page 4 of 20 Report No.: RWAO202400008 Page 5 of 20 Report No.: RWAO202400008 Page 6 of 20 Report No.: RWAO202400008 Page 7 of 20 Report No.: RWAO202400008 Page 8 of 20 Report No.: RWAO202400008 Page 9 of 20 Report No.: RWAO202400008 Page 10 of 20 Report No.: RWAO202400008 Page 11 of 20 Report No.: RWAO202400008 Page 12 of 20 Report No.: RWAO202400008 Page 13 of 20 Report No.: RWAO202400008 Page 14 of 20 Report No.: RWAO202400008 Page 15 of 20 Report No.: RWAO202400008 Page 16 of 20 Report No.: RWAO202400008 Page 17 of 20 Report No.: RWAO202400008 Page 18 of 20 Report No.: RWAO202400008 Page 19 of 20 WiFi ANT Report No.: RWAO202400008 Page 20 of 20

Report Te 3.7 R Test Da Enviro Radiatio n leakage m A 275mL power. There w a from the A maxim microwa emplate: TR-4 Radio fre ate: onment condi n leakage wa meter. L water load as no microw e external sur mum of 1.0m ve leakage in 4-E-013/V1 equency 202 tion: Te m as measured was placed i wave leakage face of the o v mW/cm2 is n the as‐receiv y exposu 24-01-08 mperature: 25 in the as‐rec in the center exceeding a p ven. allowed in ved condition Page ure 5.1C; Relative ceived condit r of the oven power level o accordance n with the ov 21 of 23 Test By: e Humidity:54% tion with the n and the ove of 0.1mW/cm with the a ven door close Repor %; ATM Press oven door c en was opera m 2 observed a pplicable Fe ed was below rt No.: RWAO2 Lirou Li sure: 101.2kPa closed using ated at maxi at any point 5 deral Standa w the maximu 202400008A a a microwave mum output 5 cm or more ards. Hence, um allowed. e t e ,

Report No.: RWAO202400008C Report Template: TR-4-E-016/V1.0 Page 1 of 6 RF Exposure Evaluation Report Report No.: RWAO202400008C Applicant: Whirlpool Microwave Products Development Limited. Address: 17th Fl, Elite Centre,22 Hung To Rd,Kwun Tong, Hong Kong Product Name: Household microwave oven Product Model: YKMMF730P Multiple Models: N/A Trade Mark: Whirlpool FCC ID: PR4FLUSHP2Y Standards: 47 CFR §1.1310 KDB 447498 D01 General RF Exposure Guidance v06 Test Date: 2024-01-08 Test Result: Complied Report Date: 2024-02-05 Reviewed by: Approved by: Abel Chen Project Engineer Jacob Kong Manager Prepared by: World Alliance Testing and Certification (Shenzhen) Co., Ltd No. 1002, East Block, Laobing Building, Xingye Road 3012, Xixiang street, Bao'an District, Shenzhen, Guangdong, People’s Republic of China This report may contain data that are not covered by the NVLAP accreditation and shall be marked with an asterisk “★” Report No.: RWAO202400008C Report Template: TR-4-E-016/V1.0 Page 2 of 6 Announcement 1．This test report shall not be reproduced in full or partial, without the written approval of World Alliance Testing and Certification (Shenzhen) Co., Ltd 2. The results in this report apply only to the sample tested. 3. This sample tested is in compliance with the limits of the above regulation. 4. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. 5. The information marked “#” is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Customer model name, addresses, names, trademarks etc. are included. Revision History Version No. Issued Date Description 00 2024-02-05 Original Report No.: RWAO202400008C Report Template: TR-4-E-016/V1.0 Page 3 of 6 Contents 1 General Information ............................................................................................................................ 4 1.1 Client Information ...................................................................................................................... 4 1.2 Product Description of EUT ....................................................................................................... 4 1.3 Laboratory Location ................................................................................................................... 4 2 RF Exposure Evaluation ..................................................................................................................... 5 2.1 Standard .................................................................................................................................... 5 2.2 Result......................................................................................................................................... 6 Report No.: RWAO202400008C Report Template: TR-4-E-016/V1.0 Page 4 of 6 1 General Information 1.1 Client Information Applicant: Whirlpool Microwave Products Development Limited. Address: 17th Fl, Elite Centre,22 Hung To Rd,Kwun Tong, Hong Kong Manufacturer: Whirlpool Microwave Products Development Limited. Address: 17th Fl, Elite Centre,22 Hung To Rd,Kwun Tong, Hong Kong 1.2 Product Description of EUT The EUT is Microwave Over operate on 2450MHz ISM frequency Band. Sample Serial Number 29-1(assigned by WATC) Sample Received Date 2024-01-08 Sample Status Good Condition Operating Frequency Range 2450MHz±50.0 MHz Power Supply AC 120V/60Hz Microwave Rated Input Power # 1500W Microwave Rated Output Power # 850W Modification Sample No Modification by the test lab 1.3 Laboratory Location World Alliance Testing and Certification (Shenzhen) Co., Ltd No. 1002, East Block, Laobing Building, Xingye Road 3012, Xixiang street, Bao'an District, Shenzhen, Guangdong, People’s Republic of China Tel: +86-755-29691511, Email: [email protected] The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 463912, the FCC Designation No. : CN5040. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0160. Report No.: RWAO202400008C Report Template: TR-4-E-016/V1.0 Page 5 of 6 2 RF Exposure Evaluation 2.1 Standard According to §1.1310, radio frequency devices shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. Calculation formula: Prediction of power density at the distance of the applicable MPE limit S = PG/4πR² = power density (in appropriate units, e.g. mW/cm 2 ); P = power input to the antenna (in appropriate units, e.g., mW); G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain; R = distance to the center of radiation of the antenna (appropriate units, e.g., cm); For simultaneously transmit system, the calculated power density should comply with: Report No.: RWAO202400008C Report Template: TR-4-E-016/V1.0 Page 6 of 6 2.2 Result Radio Frequency (MHz) Maximum Conducted Power including Tune-up Tolerance Antenna Gain Min. test separation distance (cm) Power Density (mW/cm 2 ) MPE Limit (mW/cm 2 ) Verdict (dBm) (mW) (dBi) (numeric) 2.4G WLAN 2412-2462 22.0 158.49 4.2 2.63 20 0.0829 1.0 Pass BT 2402-2480 3.0 2.0 4.2 2.63 20 0.0005 1.0 Pass BLE 2402-2480 0 1.0 4.2 2.63 20 0.0010 1.0 Pass Note: The device contains a certified Wi-Fi module(Model: RIGEL, FCC ID: 2AC7Z-RIGEL), the Maximum Conducted Power including Tune-up Tolerance and Antenna Gain in above table was refer from the module report. For microwave oven, refer report RWAO202400008A, the maximum tested microwave leakage is 0.1mW/cm 2 , the limit is 1.0mW/cm 2 Simultaneously transmit Consideration: Microwave Oven + Wi-Fi module The ra…

Text truncated - open the document above for the full version.

Report No.: RWAO202400008A Report Template: TR-4-E-013/V1 Page 1 of 23 FCC Test Report Report No.: RWAO202400008A Applicant: Whirlpool Microwave Products Development Limited. Address: 17th Fl, Elite Centre,22 Hung To Rd,Kwun Tong, Hong Kong Product Name: Household microwave oven Product Model: YKMMF730P Multiple Models: N/A Trade Mark: Whirlpool FCC ID: PR4FLUSHP2Y Standards: FCC CFR Title 47 Part 18 Test Date: 2024-01-08 Test Result: Complied Report Date: 2024-01-09 Reviewed by: Approved by: Abel Chen Project Engineer Jacob Kong Manager Prepared by: World Alliance Testing and Certification (Shenzhen) Co., Ltd No. 1002, East Block, Laobing Building, Xingye Road 3012, Xixiang street, Bao'an District, Shenzhen, Guangdong, People’s Republic of China This report may contain data that are not covered by the NVLAP accreditation and shall be marked with an asterisk “★” Report No.: RWAO202400008A Report Template: TR-4-E-013/V1 Page 2 of 23 Announcement 1．This test report shall not be reproduced in full or partial, without the written approval of World Alliance Testing and Certification (Shenzhen) Co., Ltd 2. The results in this report apply only to the sample tested. 3. This sample tested is in compliance with the limits of the above regulation. 4. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. 5. The information marked “#” is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Customer model name, addresses, names, trademarks etc. are included. Revision History Version No. Issued Date Description 00 2024-01-09 Original Report No.: RWAO202400008A Report Template: TR-4-E-013/V1 Page 3 of 23 Contents 1 General Information ............................................................................................................................ 4 1.1 Client Information ...................................................................................................................... 4 1.2 Product Description of EUT ....................................................................................................... 4 1.3 Related Submittal(s)/Grant(s) .................................................................................................... 4 1.4 Measurement Uncertainty ......................................................................................................... 4 1.5 Laboratory Location ................................................................................................................... 5 1.6 Test Methodology ...................................................................................................................... 5 2 Description of Measurement .............................................................................................................. 6 2.1 Test Configuration ...................................................................................................................... 6 2.2 Test Auxiliary Equipment ........................................................................................................... 6 2.3 Test Setup .................................................................................................................................. 6 2.4 Test Procedure .......................................................................................................................... 8 2.5 Measurement Method................................................................................................................ 9 2.6 Measurement Equipment .......................................................................................................... 9 3 Test Results ....................................................................................................................................... 11 3.1 Test Summary ........................................................................................................................... 11 3.2 Limit ......................................................................................................................................... 12 3.3 Operating frequencies ............................................................................................................. 13 3.4 Power Output Measurement ................................................................................................... 14 3.5 AC Line Conducted Emissions Test Data ................................................................................ 15 3.6 Radiated emission Test Data ................................................................................................... 17 3.7 Radio frequency exposure ...................................................................................................... 21 4 Test Setup Photo ............................................................................................................................... 22 5 E.U.T Photo ........................................................................................................................................ 23 Report No.: RWAO202400008A Report Template: TR-4-E-013/V1 Page 4 of 23 1 General Information 1.1 Client Information Applicant: Whirlpool Microwave Products Development Limited. Address: 17th Fl, Elite Centre,22 Hung To Rd,Kwun Tong, Hong Kong Manufacturer: Whirlpool Microwave Products Development Limited. Address: 17th Fl, Elite Centre,22 Hung To Rd,Kwun Tong, Hong Kong 1.2 Product Description of EUT The EUT is Microwave Over operate on 2450MHz ISM frequency Band. Sample Serial Number 29-1(assigned by WATC) Sample Received Date 2024-01-08 Sample Status Good Condition Operating Frequency Range 2450MHz±50.0 MHz Power Supply AC 120V/60Hz Microwave Rated Input Power # 1500W Microwave Rated Output Power # 850W Modification Sample No Modification by the test lab 1.3…

Text truncated - open the document above for the full version.

Report No.: RWAO202400008 Page 1 of 3 TEST SETUP PHOTOGRAPHS AC Line Conducted Emission Report No.: RWAO202400008 Page 2 of 3 Radiated Emission Below 1GHz Report No.: RWAO202400008 Page 3 of 3 Above 1 GHz