PR4SATURN32519YHousehold Microwave Oven

MICROWAVE OVEN HOOD COMBINATION OWNER’S MANUAL MANUEL DE L’UTILISATEUR DE L’ENSEMBLE FOUR À MICRO-ONDES/HOTTE Table of Contents/Table des matières MICROWAVE OVEN SAFETY.............................................2 Microwave Oven Safety ..................................................2 MICROWAVE OVEN MAINTENANCE AND CARE..................4 General Cleaning...........................................................4 INSTALLATION INSTRUCTIONS........................................4 REQUIREMENTS.............................................................4 Tools and Parts .............................................................4 Parts Supplied...............................................................5 Location Requirements ...................................................6 Product Dimensions .......................................................6 Installation Dimensions ...................................................6 Electrical Requirements ..................................................7 INSTALLATION...............................................................7 Prepare Microwave Oven Hood Combination.......................7 Separate Cardboard Template..........................................8 Installation Types...........................................................8 Find the Wall Stud(s) ......................................................9 Mark and Drill Upper Cabinet.......................................... 10 Mark and Drill Rear Wall................................................ 11 Attach Mounting Plate to Wall ......................................... 11 Rotate Blower Motor..................................................... 12 Install Damper Assembly............................................... 15 Install the Microwave Oven ............................................ 16 Complete Installation .................................................... 17 VENTING DESIGN SPECIFICATIONS................................ 17 SÉCURITÉ DU FOUR À MICRO-ONDES............................ 20 Sécurité du four à micro-ondes ....................................... 20 ENTRETIEN ET RÉPARATION DU FOUR À MICRO- ONDES........................................................................ 22 Nettoyage général........................................................ 22 INSTRUCTIONS D’INSTALLATION................................... 22 SPÉCIFICATIONS.......................................................... 22 Outils et Pièces ........................................................... 22 Pièces fournies............................................................ 23 Exigences d’Emplacement............................................. 24 Dimensions du produit .................................................. 24 Dimensions d’installation ............................................... 25 Spécifications électriques .............................................. 25 INSTALLATION............................................................. 26 Préparation de l’ensemble four à micro-ondes/hotte ............ 26 Séparer le gabarit en carton ........................................... 26 Type d’installation ........................................................ 27 Trouver les montants de cloison...................................... 28 Marquage et perçage de l’armoire supérieure .................... 29 Marquage et perçage du mur arrière ................................ 30 Fixation de la plaque de montage au mur .......................... 31 Réorientation du moteur du ventilateur ............................. 32 Installation du clapet antiretour ....................................... 35 Installation du four à micro-ondes.................................... 35 Achever l’installation..................................................... 36 SPÉCIFICATION DE LA CONCEPTION DU CIRCUIT D’ÉVACUATION............................................................. 37 W11698719A 09-Apr-2024 23:30:08 EDT | RELEASED In some European factories the letter "W" of the part code mentioned herein will be automatically replaced by the number "4000" (e.g. "W12345678" becomes "400012345678") 2 MICROWAVE OVEN SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean: DANGER You can be killed or seriously injured if you don't immediately follow instructions. WARNING You can be killed or seriously injured if you don’t follow instructions. All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed. 09-Apr-2024 23:30:08 EDT | RELEASED In some European factories the letter "W" of the part code mentioned herein will be automatically replaced by the number "4000" (e.g. "W12345678" becomes "400012345678") 3 IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances basic safety precautions should be followed, including the following: WARNING:To reduce the risk of burns, electric shock, fire, injury to persons, or exposure to excessive microwave energy: �Read all instructions before using the appliance. �Read and follow the specific “PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY” found in this manual. �This appliance must be grounded. Connect only to properly grounded outlet. See “GROUNDING INSTRUCTIONS” found in this section. �Install or locate this appliance only in accordance with the provided Installation Instructions. �Some products such as whole eggs and sealed containers - for example, closed glass jars - are able to explode and should not be heated in this oven. �Use this appliance only for its intended use as desc…

Text truncated - open the document above for the full version.

CFR 47 §2.911(d)(5)(i) Attestation Letter Whirlpool Microwave Products Development Limited. Address: 17th Fl, Elite Centre,22 Hung To Rd,Kwun Tong, Hong Kong Email: [email protected] Tel: 8675583811688 Attestation Letter Date: 2024-09-23 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i) Filing FCC ID:PR4SATURN32519Y Whirlpool Microwave Products Development Limited.certifies that the equipment for which authorization is sought, is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signature Bobo Lin Approbation Manager

U.S. AGENT LETTER OF ATTESTATION Date: 2024-09-23 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(7) Filing FCC ID: PR4SATURN32519Y Whirlpool Microwave Products Development Limited. certifies that, as of the date of the filing of the application, Whirlpool Corporation is our designated U.S. agent for service of process for the above referenced FCC ID. Whirlpool Microwave Products Development Limited. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Whirlpool Corporation accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Name: Whirlpool Corporation Address: 2000 M63 North Benton Harbor, MI 49022 United States FRN: 0011042405 Tel.: (269) 923-5068 Email: [email protected] Signed by (printed name): Cammie Rhodes Signature: Applicant: Whirlpool Microwave Products Development Limited. Address: 17th Fl, Elite Centre,22 Hung To Rd,Kwun Tong, Hong Kong FRN: 0012635595 Tel: 8675583811688 Email: [email protected] Signed by (printed name): Bobo Lin Signature:

CFR 47 §2.911 (d)(5)(ii) Attestation Letter Whirlpool Microwave Products Development Limited. Address: 17th Fl, Elite Centre,22 Hung To Rd,Kwun Tong, Hong Kong Email: [email protected] Tel: 8675583811688 Attestation Letter Date: 2024-09-23 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(ii) Filing FCC ID: PR4 SATURN32519Y Whirlpool Microwave Products Development Limited.certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signature Name: Bobo Lin Title: Approbation Manager

Whirlpool Microwave Products Development Limited. Address: 17th Fl, Elite Centre,22 Hung To Rd,Kwun Tong, Hong Kong Email: [email protected] Tel: 8675583811688 QA-FR-170-B 7/29/2014 FCC Authorization Date: 2024-09-23 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, Whirlpool Microwave Products Development Limited. the undersigned, hereby authorizes World Alliance Testing and Certification (Shenzhen) Co., Ltd to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by World Alliance Testing and Certification (Shenzhen) Co., Ltd on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely, Signature Bobo Lin Approbation Manager

Whirlpool Microwave Products Development Limited. Address: 17th Fl, Elite Centre,22 Hung To Rd,Kwun Tong, Hong Kong Email: [email protected] Tel: 8675583811688 FCC Confidential Authorization Date: 2024-09-23 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: PR4SATURN32519Y In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Whirlpool Microwave Products Development Limited. hereby requests long-term confidential treatment of information accompanying this application as outlined below: • Block Diagram • Schematics • Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature Bobo Lin Approbation Manager

Report No.: 2405X27407E Page 1 of 4 EUT EXTERNAL PHOTOGRAPHS Report No.: 2405X27407E Page 2 of 4 Report No.: 2405X27407E Page 3 of 4 Report No.: 2405X27407E Page 4 of 4

Label Label Location Information

Report No.: 2405X27407E Page 1 of 11 EUT INTERNAL PHOTOGRAPHS Report No.: 2405X27407E Page 2 of 11 Report No.: 2405X27407E Page 3 of 11 Report No.: 2405X27407E Page 4 of 11 Report No.: 2405X27407E Page 5 of 11 Report No.: 2405X27407E Page 6 of 11 Report No.: 2405X27407E Page 7 of 11 Report No.: 2405X27407E Page 8 of 11 Report No.: 2405X27407E Page 9 of 11 Report No.: 2405X27407E Page 10 of 11 Report No.: 2405X27407E Page 11 of 11

Report No.: 2405X27407EA Report Template: TR-4-E-013/V1.1 Page 20 of 22 3.7 Radio frequency exposure Test Date: 2024-09-13 Test By: Lirou Li Environment condition: Temperature: 23.9C; Relative Humidity:61%; ATM Pressure: 101.4kPa Radiation leakage was measured in the as-received condition with the oven door closed using a microwave leakage meter. A 275mL water load was placed in the center of the oven and the oven was operated at maximum output power. There was no microwave leakage exceeding a power level of 0.1mW/cm 2 observed at any point 5 cm or more from the external surface of the oven. A maximum of 1.0mW/cm 2 is allowed in accordance with the applicable Federal Standards. Hence, microwave leakage in the as-received condition with the oven door closed was below the maximum allowed.

Report Template: TR-4-E-013/V1.1 FCC Report No.: 2405X27407EA Applicant: Whirlpool Microwave Products Development Limited. Address: 17th Fl, Elite Centre,22 Hung To Rd,Kwun Tong, Hong Kong Product Name: Household Microwave Oven Product Model: YKMMS130RPS00 Multiple Models: N/A Trade Mark: Whirlpool FCC ID: PR4SATURN32519Y Standards: FCC CFR Title 47 Part 1 Test Date: 2024-09 Test Result: Complied Report Date: 2024-09 Reviewed by: Abel Chen Project Engineer World Alliance Testing No. 1002, East Block, Laobing Building, Xingye Road 3012, Xixiang street, Bao'an This report may contain data that are not covered by the NVLAP accreditation and shall be marked with an asterisk “★” Report No.: 13/V1.1 Page 1 of 22 FCC Test Report 2405X27407EA Whirlpool Microwave Products Development Limited. 17th Fl, Elite Centre,22 Hung To Rd,Kwun Tong, Hong Kong Household Microwave Oven YKMMS130RPS00 Whirlpool SATURN32519Y FCC CFR Title 47 Part 18 09-13 to 2024-09-15 Complied 09-18 Approved by: Abel Chen Project Engineer Prepared by: World Alliance Testing & Certification (Shenzhen) Co., Ltd No. 1002, East Block, Laobing Building, Xingye Road 3012, Xixiang street, Bao'an Guangdong, People’s Republic of China This report may contain data that are not covered by the NVLAP accreditation and shall be marked with an Report No.: 2405X27407EA Whirlpool Microwave Products Development Limited. 17th Fl, Elite Centre,22 Hung To Rd,Kwun Tong, Hong Kong Jacob Kong Manager Certification (Shenzhen) Co., Ltd No. 1002, East Block, Laobing Building, Xingye Road 3012, Xixiang street, Bao'an District, Shenzhen, This report may contain data that are not covered by the NVLAP accreditation and shall be marked with an Report Template: TR-4-E-013/V1.1 1. This test report shall not be reproduced except in full, without the written approval of World Alliance Testing & Certification (Shenzhen) Co., Ltd 2. The results in this report apply only to the sample tested. 3. This sample tested is in compliance with the limits of the above regulation. 4. This report must not be used by the client to claim product certification, a NVLAP, NIST, or any agency of the 5. The information marked “#” authenticity and this information can affect the validity of the result in t addresses, names, trademarks etc. are included. Version No. 00 Report No.: 13/V1.1 Page 2 of 22 Announcement This test report shall not be reproduced except in full, without the written approval of World Alliance Certification (Shenzhen) Co., Ltd 2. The results in this report apply only to the sample tested. in compliance with the limits of the above regulation. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Customer model name, addresses, names, trademarks etc. are included. Revision History Issued Date Description 2024-09-18 Original Report No.: 2405X27407EA This test report shall not be reproduced except in full, without the written approval of World Alliance pproval, or endorsement by is provided by the applicant, the laboratory is not responsible for its he test report. Customer model name, Description Original Report Template: TR-4-E-013/V1.1 1 General Information ................................ 1.1 Client Information ................................ 1.2 Product Description of 1.3 Related Submittal(s)/Grant(s) 1.4 Measurement Uncertainty 1.5 Laboratory Location ................................ 1.6 Test Methodology ................................ 2 Description of Measurement 2.1 Test Configuration ................................ 2.2 Test Auxiliary Equipment 2.3 Test Setup ................................ 2.4 Test Procedure ................................ 2.5 Measurement Method 2.6 Measurement Equipment 3 Test Results ................................ 3.1 Test Summary ................................ 3.2 Limit ................................ 3.3 Operating frequencies 3.4 Power Output Measurement 3.5 AC Line Conducted Emissions 3.6 Radiated emission Test Data 3.7 Radio frequency exposure 4 Test Setup Photo ................................ 5 E.U.T Photo ................................ Report No.: 13/V1.1 Page 3 of 22 Contents ................................................................................................ ................................................................................................ of EUT ................................................................................................ Related Submittal(s)/Grant(s) ................................................................ Measurement Uncertainty ................................................................................................ ................................................................................................ ................................................................................................ Measurement ................................................................................................ ................................................................................................ Auxiliary Equipment ................................................................................................ ................................................................................................ ................................................................................................ Method................................................................................................ Equipment ................................................................................................ ................................................................................................................................ ...................................................…

Text truncated - open the document above for the full version.

Report No.: 2405X27407E Page 1 of 3 TEST SETUP PHOTOGRAPHS AC Line Conducted Emission Report No.: 2405X27407E Page 2 of 3 Radiated Emission Below 1GHz Report No.: 2405X27407E Page 3 of 3 Above 1 GHz