PRIADT-2000FTADigital Satellite Receiver

Appendix F. USER`S MANUAL AD-2000FTA Appendix F. USER`S MANUAL Appendix F. USER`S MANUAL Appendix F. USER`S MANUAL Appendix F. USER`S MANUAL Appendix F. USER`S MANUAL Appendix F. USER`S MANUAL Appendix F. USER`S MANUAL Appendix F. USER`S MANUAL Appendix F. USER`S MANUAL Appendix F. USER`S MANUAL Appendix F. USER`S MANUAL Appendix F. USER`S MANUAL Appendix F. USER`S MANUAL Appendix F. USER`S MANUAL Appendix F. USER`S MANUAL Appendix F. USER`S MANUAL Appendix F. USER`S MANUAL Appendix F. USER`S MANUAL Appendix F. USER`S MANUAL Appendix F. USER`S MANUAL Appendix F. USER`S MANUAL Appendix F. USER`S MANUAL FCC WARNING This equipment generates or uses radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. INFORMATION TO THE USER This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can generate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer for technical assistance.

Report No: E01.0624.FCC15B.247N FCC ID : PRIADT-2000FTA Date of Test : June 21 ~ 22, 2001 1 of 1 Advanced Digital Technology Co.,Ltd. Digital Satellite Receiver Model :ADT-2000FTA Appendix E. Block Diagram

Report No: E01.0624.FCC15B.247N FCC ID : PRIADT-2000FTA Date of Test : June 21 ~ 22, 2001 1 of 1 Advanced Digital Technology Co.,Ltd. Digital Satellite Receiver Model :ADT-2000FTA Appendix C. External Photographs

Report No: E01.0624.FCC15B.247N FCC ID : PRIADT-2000FTA Date of Test : June 21 ~ 22, 2001 1 of 1 Advanced Digital Technology Co.,Ltd. Digital Satellite Receiver Model :ADT-2000FTA Appendix A. ID Label and Location Product Label Sample with FCC ID Label information Following is a sample copy of the label that will be placed on the bottom cabinet of the product. The FCC identifier and compliance statement are marked in the product label. Label Location The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase.(Labeling requirements per 2.925) Advanced Digital Technology FCC ID : PRIADT-2000FTA Model Name: ADT-2000FTA Serial No : Power : AC 100V 60/50Hz 1.6 ~0.8A This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Advanced Digital Technology 137-130 ADT BLDG., 3-3, Yangjae-Dong, Seocho-Gu, Seoul, Korea

Report No: E01.0624.FCC15B.247N FCC ID : PRIADT-2000FTA Date of Test : June 21 ~ 22, 2001 1 of 1 Advanced Digital Technology Co.,Ltd. Digital Satellite Receiver Model :ADT-2000FTA Appendix D. Internal Photographs Report No: E01.0624.FCC15B.247N FCC ID : PRIADT-2000FTA Date of Test : June 21 ~ 22, 2001 2 of 2 Advanced Digital Technology Co.,Ltd. Digital Satellite Receiver Model :ADT-2000FTA Appendix D. Internal Photographs Report No: E01.0624.FCC15B.247N FCC ID : PRIADT-2000FTA Date of Test : June 21 ~ 22, 2001 3 of 3 Advanced Digital Technology Co.,Ltd. Digital Satellite Receiver Model :ADT-2000FTA Appendix D. Internal Photographs Report No: E01.0624.FCC15B.247N FCC ID : PRIADT-2000FTA Date of Test : June 21 ~ 22, 2001 4 of 4 Advanced Digital Technology Co.,Ltd. Digital Satellite Receiver Model :ADT-2000FTA Appendix D. Internal Photographs Report No: E01.0624.FCC15B.247N FCC ID : PRIADT-2000FTA Date of Test : June 21 ~ 22, 2001 5 of 5 Advanced Digital Technology Co.,Ltd. Digital Satellite Receiver Model :ADT-2000FTA Appendix D. Internal Photographs Report No: E01.0624.FCC15B.247N FCC ID : PRIADT-2000FTA Date of Test : June 21 ~ 22, 2001 6 of 6 Advanced Digital Technology Co.,Ltd. Digital Satellite Receiver Model :ADT-2000FTA Appendix D. Internal Photographs

www.ETL.re.kr E-RAE Testing Laboratory This report only responds to the tested sample and may not be reproduced, except in full, without written approval of the ETL,Inc. Electromagnetic Emission FCC MEASUREMENT REPORT VERIFICATION OF COMPLIANCE FCC Part 15 Certification Measurement This Digital Satellite Receiver Model ADT-2000FTA has been tested in accordance with the measurement procedures specified in ANSI C63.4-1992 at the ETL/EMC Test Laboratory and has been shown to be complied with the electromagnetic radiated emission limits specified in FCC Rule Part15 Subpart B : Unintentional Radiators. I attest to the accuracy of data. All measurement herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. The results of testing in this report apply to the product/system which was tested only. Other similar equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties Name : Kayoung Kim Title : Chief Engineer & Lab.Manager E-RAE Testing Laboratory Inc. 371-51, Gasan-Dong, Geumcheon-Gu, Seoul, 153-023, Korea PRODUCT : Digital Satellite Receiver MODEL/TYPE NO : ADT-2000FTA FCC ID : PRIADT-2000FTA APPLICANT : Advanced Digital Technology Co.,Ltd. ADT BLDG., 3-3, Yangjae-Dong, Seocho-Gu, Seoul, Korea Attn. : Dong Hoon, Kim FCC CLASSIFICATION : TV Interface Devices(HID) FCC RULE PART(S) : FCC Part 15 Subpart B FCC PROCEDURE : Certification TRADE NAME : ADT TEST REPORT No. : E01.0624.FCC.247N DATES OF TEST : June 20 ~ 21 , 2001 DATES OF ISSUE : June 24, 2001 TEST LABORATORY ETL Inc ( FCC Registration Number : 95422) 371-51, Gasan-Dong, Geumcheon-Gu, Seoul, Korea Tel : (031) 885-0072 Fax : (031) 885-0074 Report No: E01.0624.FCC15B.247N FCC ID : PRIADT-2000FTA Date of Test : June 21 ~ 22, 2001 ETL Inc. 371-51 Gasan-Dong, eumcheon-Gu, Seoul, 153-023, Korea Advanced Digital Technology Co.,Ltd. Digital Satellite Receiver Model :ADT-2000FTA Table of Contents ATTACHMENT A: COVER LETTER(S) FCC Measurement Report 1. Introduction 2. Product Information 3. Description of Tests 4. Test Condition 5. Test Results 5.1 Summary of Test Results 5.2 Conducted Emission Test 5.3 Radiated Emission Test 5.4 Output Signal Level Measurement 5.5 Output Terminal Conducted Spurious Emission Measurement 5.6 Transfer Switch Measurement 6. Sample Calculations 7. List of test Equipment used for Measurement Appendix A. FCC ID Label and Location Appendix B. Test Setup Photographs Appendix C. External Photographs Appendix D. Internal Photographs Appendix E. Block Diagram Appendix F. Operating Manual Report No: E01.0624.FCC15B.247N FCC ID : PRIADT-2000FTA Date of Test : June 21 ~ 22, 2001 ETL Inc. 371-51 Gasan-Dong, Geumcheon-Gu, Seoul, 153-023, Korea Advanced Digital Technology Co.,Ltd. Digital Satellite Receiver Model :ADT-2000FTA FCC MEASUREMENT REPORT Scope – Measurement and determination of electromagnetic emission(EME) of radio frequency devices including intentional radiators and/or unintentional radiators for compliance with the technical rules and regulations of the U.S Federal Communications Commission(FCC) General Information l EUT Type : Digital Satellite Receiver l Model Number : ADT-2000FTA l FCC Identifier : PRIADT-2000FTA l S/N : Prototype l Freq. Range : 60 MHz – 72 MHz l FCC Rule Part(s) : Part 15 Subpart B Section 15.115 l Test Procedure : MP-3 ; ANSI C63.4-1992 l FCC Classification : TV Interface Device(HID) l RF Channels : Ch. 3 / Ch. 4 l Dates of Tests : June 20 ~ 21, 2001 l Place of Tests : ETL Inc 584, Sangwhal-Ri, Kanam-Myun, Yoju-Kun, Kyounggi-Do, Korea Tel : (031) 885-0072 Fax : (031) 885-0074 l Test Report No. : E01.0624.FCC15B.247N Applicant Name : Advanced Digital Technology Co.,Ltd. Address : ADT Bldg., 3-3, Yangjae-Dong, Seocho-Gu, Seoul, Korea Attention : Mr. Jung Hawan, Park Report No: E01.0624.FCC15B.247N FCC ID : PRIADT-2000FTA Date of Test : June 21 ~ 22, 2001 ETL Inc. 371-51 Gasan-Dong, Geumcheon-Gu, Seoul, 153-023, Korea Advanced Digital Technology Co.,Ltd. Digital Satellite Receiver Model :ADT-2000FTA The measurement test for radiated and conducted emission test were conducted at the open area test site of E- RAE Testing Laboratiry Inc. facility located at 584, Sangwhal-ri, Ganam-myun, Youju-kun, Kyoungki-do, Korea. The site is constructed in conformance with the requirements of the ANSI C63.4-1992 and CISPR Publication 16. The ETL has site descriptions on file with the FCC for 3 and 10 meter site configurations. Detailed description of test facility was found to be in compliance with the requirements of Section 2.948 FCC Rules according to the ANSI C63.4-1992 and registered to the Federal Communications Commission(Registration Number : 95422 ). The measurement procedure described in American National Standard for Method of Measurement of Radio-Noise Emission from Low-Voltage Electrical and Electronic Equipment in the Range of 9kHz to 40GHz (ANSI C.63.4- 1992) was used in determining radiated and conducted emissions from the Advanced Digital Technology Co.,Ltd. Digital Satellite Receiver Model : ADT-2000FTA. Report No: E01.0624.FCC15B.247N FCC ID : PRIADT-2000FTA Date of Test : June 21 ~ 22, 2001 ETL Inc. 371-51 Gasan-Dong, Geumcheon-Gu, Seoul, 153-023, Korea Advanced Digital Technology Co.,Ltd. Digital Satellite Receiver Model :ADT-2000FTA 2.1 Equipment Description The Equipment Under Test(EUT) is the Advanced Digital Technology Co., Ltd. Digital Satellite Receiver Model : ADT-2000FTA (FCC ID : ADT-2000FTA). 2.2 General Specification - Chassis Type : Metal - List of Each OSC. Or X-Tal. Freq.(>=1MHz) : 27MHz -. RF MODULATOR : LG Innotek Co., Ltd., TAM C-H 001F (Ch 3/ Ch 4) Channel : 14 to 83 RF signal : PAL B/G D/K NTSC M -. Tuner(LNB) : NIM MODULE (Tuner) : LG Innotek Co.,Ltd., TDQB-S001F WAVE Form : QPSK, Symbol rate : 1-45 Msps Input Frequency : 950 …

Text truncated - open the document above for the full version.

Report No: E01.0624.FCC15B.247N FCC ID : PRIADT-2000FTA Date of Test : June 21 ~ 22, 2001 1 of 1 Advanced Digital Technology Co.,Ltd. Digital Satellite Receiver Model :ADT-2000FTA Appendix B. Test Setup Photographs AC Power Line Conducted Emission Test Setup Report No: E01.0624.FCC15B.247N FCC ID : PRIADT-2000FTA Date of Test : June 21 ~ 22, 2001 2 of 2 Advanced Digital Technology Co.,Ltd. Digital Satellite Receiver Model :ADT-2000FTA Appendix B. Test Setup Photographs Radiated Emission Test Setup Output Signal Level Measurement Setup Report No: E01.0624.FCC15B.247N FCC ID : PRIADT-2000FTA Date of Test : June 21 ~ 22, 2001 3 of 3 Advanced Digital Technology Co.,Ltd. Digital Satellite Receiver Model :ADT-2000FTA Appendix B. Test Setup Photographs Output Terminal Conducted Spurious Emission Measurement Setup Transfer Switch Measurement