PXWHL700MLCD Monitor

WOO YOUNG Telecom CO.,LTD. U s e rs Refere n c e FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or tele- vision reception, with can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. - Only shielded interface cable should be used. Finally, any changes or modifications to the equipment by the user not expressly approved by the grantee or manufacturer could void the users authority to operate such equipment. Appendix A. Specifications The specification of this monitor is subject to be changed without notice to improve perfor- mance. Panel Display Resolution Frequency Sync Signal Connectors Tilting Degree (U/D) Plug&Play Power Power Management Environmental Consideration Dimensions Weight TFT active matrix 17 inch 337.92mm270.336mm 0.264mm0.264mm 8-bit (16,777,216 colors) 12801024@60Hz 1280 1024@75Hz 31.5~80KHz 56~75Hz TTL, P. or N. D-Sub 15pin connector Speaker Input / Headphone Output (Audio Cable) 24pin Digital Cable Audio Cable RCA Cable S-Video Cable External TV Box(HL700MT Only) -3~20Degree VESA DDC 1/2B 90~265VAC Adapter DC 12V, 4.16A VESA DPMS 0~40C (32F~104F) 90% less 416mm(W)409mm(H)186mm(D) 5.2kg 3kg Type Pixel Pitch Display Color Basic Maximum Horizontal Vertical Input Output Consumption Standby mode Temperature Humidity Outside Monitor Carton Size 1 Contents 1. Before Setting up3 Brief Specification of LCD Monitor 3 In multimedia Model, added the below functions 3 Precautions 4 2. Items6 3. Setting up the LCD monitor8 Where is a good place to position the monitor?8 Check before connecting the power cord and the signal cable !!8 Monitor’s connectors (HL700A)9 Monitor’s connectors (HL700M / MT)10 Connecting Your LCD Monitor11 Plug & Play12 Warm-up Time12 4. Adjusting The Monitor13 The Function Control Buttons (HL700A)13 How to use the Hot Key. (HL700A)13 The Function Control Buttons (HL700M / MT)14 How to use the Hot Key. (HL700M / MT)14 Main OSD Menu15 BRIGHTNESS/CONTRAST15 2 POSITION &CLOCK/PHASE16 COLOR17 OSD MENU ADJUSTMENT & INPUT SOURCE17 SETUP MENU 18 Input Source18 Video1, Video219 5. Appendix20 Appendix A. Specifications20 Appendix B. 15-pin D-Sub Connector21 Appendix C. 24-pin DVI Connector22 Appendix D. DPMS Power Saving Mode23 6. Troubleshooting24 3 Before setting up1 Resolution : 17.0 inch SXGA (1280 X 1024@75Hz) Color display : 16,777,216 colors DPMS (Display Power Management Signaling) OSD (On Screen Display) Auto Configuration : Hot key Speaker [L + R : 3W + 3W = 6W (max)] DDC 1/2B : Plug & Play This is 17.0 inch TFT-LCD monitor. Before setting up the LCD Monitor, please read this manual to help your understanding of the LCD Monitor. Brief Specification of LCD Monitor DVI(Digital Video Interface) Composit video input Composit Audio input S-Video input TV(HL700MT Only) In Multimedia Model, added the below function: According to PC system, DDC 1/2B may not be supported. If you meet Error message,check your video card which compatibility with DDC. If you eant to know more information, please contact our service center. Notice 4 Do not use Ketone type material (ex. Acetone), Ethyl Alcohol, Toluene, Ethyl Acid or Methyl chloride, to clear the panel. It might permanently damage the panel. 90V~265V Check the voltage corresponds to the local electrical supply before connecting the AC power cord. Never use the damaged AC power cord. Keeps it away from stoves, heaters, fireplaces and other sources of heat and magnets. Don’t put your LCD monitor in a location with high humidity and dust. Temperature : 0~40。C Humidity : 90% less Place the LCD monitor on a solid sur- face. If dropped, the screen can be damaged easily. Precautions 5 Don’t touch the screen with a acute nail and pin The LCD monitor can be damaged easi- ly by shock. The LCD monitor consists of electrical devices. If the LCD monitor is damaged, contact immediately our service center. Don’t use your LCD monitor under direct sunlight. If you don’t use the LCD monitor for a long time, unplug the LCD monitor. 6 Items LCD MonitorUser Manual 2 How to fold stand If you need to fold stand for movimg. please refer to the below picture. To fold stand, you must down lever, and you can fold stand. Notice 7 Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Notice 15-pin D-Sub Signal CableAudio CableRCA Cable S-Video Cable DC Adapter 24pin Digital Cable(Option)External TV Box (HL700MT Only) 8 Setting up the LCD monitor3 Place the LCD monitor on a solid and flat surface. If dropped, the screen can be dam- aged easily. Turn off the PC power before connecting the power cord and signal cable to the LCD monitor. Where is a good place to position the monitor? Check before connecting the power cord and the signal cable !! 9 Monitor’s connectors (HL700A) 1 3 4 2 PC15-pin D-Sub Signal Cable DC Adaptor Audio Cable External Speaker DC12V PC AUDIO IN SPK OUT No. Cable connectionsName 10 PCVIDEO 1DVIDigital Video Cable(option)6AUDIO(R)Audio output(R) (Red) 2PC 15-pin D-Sub Signal Cable7AUDIO(L)Audio output(L) (White) 3DC12VDC Adapter8VIDEO1DVD/VC…

Text truncated - open the document above for the full version.

HL700M Block Diagram

ID Label Sample & Location Information

File No. 03-IST-059/FB IST EMC LAB. 117 IST EMC Lab. San 21-8 Goan-Ri, Baekam-Myun, Yongin-Si, Kyunggi-Do, KOREA International - Tel : 82-31 - 333 - 4093. Fax : 82-31 - 333 - 4094. Domestic - Tel : 031 - 333 - 4093. Fax : 031 - 333 - 4094. IST EMC LAB. EMISSION TEST REPORT Test report file No. : 03-IST-059/FB Date of issue : Feb. 24, 2003 Model / Type No. : HL700M Basic Alternate Kind of product Brand name Applicant Manufacturer License holder Address : 17” LCD Monitor : WOOYOUNG : WOO YOUNG Telecom CO.,LTD. : WOO YOUNG Telecom CO.,LTD. : WOO YOUNG Telecom CO.,LTD. : 222-1, Suwolam-Ri, Seotan-Myum, Pyungtaek-City, Kyunggi-Do, 451-852, Korea Test result according to the regulation(s) Positive Negative at page 3. This test report with appendix consists of 17 pages. The test result only responds to the tested sample. It is not allowed to copy this report even partly without the allowance of the Test Laboratory. This equipment is complied with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.4-1992. File No. 03-IST-059/FB IST EMC LAB. 217 IST EMC Lab. San 21-8 Goan-Ri, Baekam-Myun, Yongin-Si, Kyunggi-Do, KOREA International - Tel : 82-31 - 333 - 4093. Fax : 82-31 - 333 - 4094. Domestic - Tel : 031 - 333 - 4093. Fax : 031 - 333 - 4094. DIRECTORY A) Documentation. Page Directory Test regulations Information of Test Regulation Equipment under Test Test Conditions Test Result Measurement Uncertainty Test-setup Summary 2 3 3 4 5 ~ 6 7 8 9 ~ 11 17 B) Test Data. Conducted emissions (Mains) Radiated emissions : 150 kHz - 30 MHz : 30 MHz – 1 GHz 12 ~ 14 15 ~ 16 C) Appendix File No. 03-IST-059/FB IST EMC LAB. 317 IST EMC Lab. San 21-8 Goan-Ri, Baekam-Myun, Yongin-Si, Kyunggi-Do, KOREA International - Tel : 82-31 - 333 - 4093. Fax : 82-31 - 333 - 4094. Domestic - Tel : 031 - 333 - 4093. Fax : 031 - 333 - 4094. TEST REGULATIONS The tests were performed according to the following regulations ; - FCC Part 15, Subpart B (Unintentional Radiators, Class B) Information of Test Laboratory IST EMC Lab. San 21-8 Goan-Ri, Baekam-Myun, Yongin-Si, Kyunggi-Do, Korea International - Tel : 82-31 - 333 - 4093. Fax : 82-31 - 333 - 4094. Domestic - Tel : 031 - 333 - 4093. Fax : 031 - 333 - 4094. EQUIPMENT UNDER TEST Equipment Description : Panel : TFT active matrix Size – 337.92 x 270.336 mm M170EN05 (AU Optronics Corp.) Resolution : 1280 x 1024, 75 Hz (max.) Plug & Play : VESA DDC 1/2B Power Saving : VESA DPMS Power Supply Adapter : Maker - Edac Power Electronics Co., Ltd. Model - EA1050C0120 Input - 100 ~ 240 Vac, 1.5 A, 50/60 Hz Output – 12 Vdc, 4.2 A File No. 03-IST-059/FB IST EMC LAB. 417 IST EMC Lab. San 21-8 Goan-Ri, Baekam-Myun, Yongin-Si, Kyunggi-Do, KOREA International - Tel : 82-31 - 333 - 4093. Fax : 82-31 - 333 - 4094. Domestic - Tel : 031 - 333 - 4093. Fax : 031 - 333 - 4094. EQUIPMENT UNDER TEST EUT Type : Table-Top. Floor-Standing. Table-Top and Floor-Standing(Combination). Operation – mode of the E.U.T. : The equipment under test was operated during the measurement under following conditions : Standby. Operational Condition : Scrolling “H” characters under MS Windows, at test mode of 1280 X 1024, 75 Hz Configuration of the equipment under test : Following peripheral devices and interface cables were connected during the measurement : Equipment Type Brand Serial No. PC Vectra VL420MT HP SG23101784 Keyboard SK-2502C HP M020321066 PS/2 Mouse M-S48a HP LZC20602926 Serial Mouse M-S428 Logitech LCA53305547 Printer A0302384 Northern Telecom 26633S60168 Head set NM-V33 TOCO Unknown Tuner TAPC-H701F LG Innotek Unknown Connecting Interface Cables : - Unshielded AC power cable : 1.8 m - Unshielded DC power cable : 1.5 m - Shielded monitor’s signal cable : 1.5 m - Shielded printer’s signal cable : 1.8 m - Unshielded RCA cable : 1.8 m - Unshielded S-Video Cable : 1.5 m - Shielded DVI cable : 1.9 m File No. 03-IST-059/FB IST EMC LAB. 517 IST EMC Lab. San 21-8 Goan-Ri, Baekam-Myun, Yongin-Si, Kyunggi-Do, KOREA International - Tel : 82-31 - 333 - 4093. Fax : 82-31 - 333 - 4094. Domestic - Tel : 031 - 333 - 4093. Fax : 031 - 333 - 4094. TEST CONDITIONS The measurement of the conducted emissions (Interference voltage) was performed in a shielded room. Test location : Shielded room. No.1 Compact chamber 2 Used testing instruments : Name Type Manufacturer Calibration. Date Serial Number ESH 3 Test Receiver Rohde & Schwarz Jul. 25, 2002 892108/018 3725/2 LISN EMCO Aug. 22, 2002 9101-2068 KNW-407 LISN Hyup-Rip Aug. 21, 2002 8-883-10 ESH 3-Z2 Pulse Limiter Rohde & Schwarz Jul. 25, 2002 357.8810.52 Test - accessories : Type Manufacturer Aneroid Barometer Sato Hygrometer Sato Measurement Procedures : Conducted emissions measurments were made in accordance with ANSI C-63.4-1992, “Method of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz”. The measurement were performed over the frequency range of 0.15MHz to 30MHz using a 50 ? /50uH LISN as the input transducer to an EMI/Field Intensity Meter. The measurements were made with the detector set for “Peak” amplitude within an IF bandwidth of 10kHz or for “quasi-peak” within a bandwidth of 9kHz. All used test-instruments as well as the test-accessories are calibrated regularly. File No. 03-IST-059/FB IST EMC LAB. 617 IST EMC Lab. San 21-8 Goan-Ri, Baekam-Myun, Yongin-Si, Kyunggi-Do, KOREA International - Tel : 82-31 - 333 - 4093. Fax : 82-31 - 333 - 4094. Domestic - Tel : 031 - 333 - 4093. Fax : 031 - 333 - 4094. The measurement of the radiated emissions (Electric field) in the frequency range from 30 MHz to 1GHz was performed in horizontal and vertical antenna polarization at a open-site which meet the site attenuation requirement of ANSI C63.4-1992 and a test distance of : Location : Open Site No. 1 Open Site No. 2 Open Site No. 3 Distance : 3 meters 10 meters Used testing instruments : Name Type Manufact…

Text truncated - open the document above for the full version.