PXWHLM151XAR15" Color LCD Monitor

FCC RF INTERFERENCE STATEMENT NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to corre ct the interference by one or more of the following measures. -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiv er is connected. -Consult the dealer or an experienced radio, TV technical for help. -Only shielded interface cable should be used. Finally, any changes or modifications to the equipment by the user not expressly approved by the grantee or manufacturer could void the users authority to operate such equipment, Contents 1 Before Setting up --------------------------------------------------------------------------------------------------------------3 Brief Specification of LCD Monitor-----------------------------------------------------------------------------------3 Precautions------------------------------------------------------------------------------------------------------------------------4 Items--------------------------------------------------------------------------------------------------------------------------------------6 Setting up the LCD monitor -------------------------------------------------------------------------------------------8 Where is a good place to position the monitor?--------------------------------------------------------------8 Check before connecting the power cord and the signal cable !!----------------------------------8 How to connect the power cord and the signal cable to the LCD monitor.--------------------9 Connecting Your LCD Monitor-----------------------------------------------------------------------------------------9 Plug & Play------------------------------------------------------------------------------------------------------------------------9 Warm-up Time-------------------------------------------------------------------------------------------------------------------9 Adjusting The Monitor ---------------------------------------------------------------------------------------------------10 The Function Control Buttons-----------------------------------------------------------------------------------------10 How to use function control button---------------------------------------------------------------------------------10 How to use the Hot Key.-------------------------------------------------------------------------------------------------11 Main OSD Menu--------------------------------------------------------------------------------------------------------------12 COLOR----------------------------------------------------------------------------------------------------------------------------13 USER COLOR-----------------------------------------------------------------------------------------------------------------13 OSD POSITION--------------------------------------------------------------------------------------------------------------14 2 VIDEO------------------------------------------------------------------------------------------------------------------------------15 Appendix----------------------------------------------------------------------------------------------------------------------------17 Appendix A. Display Modes-------------------------------------------------------------------------------------------17 Appendix B. 15-pin D-Sub Connector----------------------------------------------------------------------------17 Appendix C. DPMS Power Saving Mode----------------------------------------------------------------------18 Troubleshooting--------------------------------------------------------------------------------------------------------------19 1 Before Setting up 3 This is 15 inch TFT-LCD monitor. Before Setting up the LCD Monitor, Please this manual read help your understanding ok. Resolution : 15 inch XGA (1024 X 768 @60Hz) Color display : 16,777,216 colors DPMS (Display Power Management Signaling) OSD (On Screen Display) Auto Configuration : Hot key DDC 1/2B : Plug & Play Speaker : Max 4W [2W X 2W] Brief Specification of LCD Monitor According to PC system, DDC 1/2B may not be supported. If you meet Display Error message, check your video card which compatibility with DDC. If you want to know more information, please contact our service center. Notice 4 Do not use Ketone type material (ex. Acetone), Ethyl Alcohol, Toluene, Ethyl Acid or Methyl chloride, to clear the panel. It might permanently damage the panel. Check the voltage corresponds to the local electrical supply before connecting the AC power cord, Never use the damaged AC power cord. Keep it away from stoves, heaters, fireplaces and other sources of heat and magnets. Don’t put your LCD monitor in a location with high humidity and dust. Temperature : 0~40 ̊C Humidity : 90% less Place the LCD monitor on a solid surface. If dropped, the screen can be damaged easily. Precautions 5 Don’t touch the screen with a acute nail and pin The LCD monitor can be damaged easily by shock. The LCD monitor consists of electrical devices. If the LCD monitor is damaged, contact immediately our service center. Don’t use your LCD monitor in under direct sunlight. If you don’t use the LCD monitor for a long time, unplug the LCD monitor. 6 2 Items User ManualLCD Monitor 15-pin …

Text truncated - open the document above for the full version.

LCD CONNECTOR Inverte r 14.31818MHz Connector VIDEO SIGINAL 12.000MHz MICRO CONTROLLER SOUND SIGINAL Key J402Connector AUDIO L HLM151XAR INVERTER SCALAR X-TAL VIDEO 12V ADAPTER VIDEO LCD MODULE X-TAL ADC DC JACK D-SUB SAA7114 24.576MHz AUDIO R

ID Label Sample & Location Information

File No. 02-IST-199/FB IST EMC LAB. Page 1 of 23 IST EMC Lab. San 21-8 Goan-Ri, Baekam-Myun, Yongin-Si, Kyunggi-Do, KOREA International - Tel : 82-31 - 333 - 4093. Fax : 82-31 - 333 - 4094. Domestic - Tel : 031 - 333 - 4093. Fax : 031 - 333 - 4094. IST EMC LAB. EMISSION TEST REPORT Test report file No. : 02-IST-199/FB Date of issue : Oct. 02, 2002 Model / Type No. : HLM151XAR ■ Basic □ Alternate Kind of product Brand name Applicant Manufacturer License holder Address : 15” LCD Monitor : WOOYOUNG : WOO YOUNG Telecom CO.,LTD. : WOO YOUNG Telecom CO.,LTD. : WOO YOUNG Telecom CO.,LTD. : 222-1, Suwolam-Ri, Seotan-Myum, Pyungtaek-City, Kyunggi-Do, 451-852, Korea Test result according to the regulation(s) „ Positive † Negative at page 3. This test report with appendix consists of 23 pages. The test result only responds to the tested sample. It is not allowed to copy this report even partly without the allowance of the Test Laboratory. This equipment is complied with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.4-1992. File No. 02-IST-199/FB IST EMC LAB. Page 2 of 23 IST EMC Lab. San 21-8 Goan-Ri, Baekam-Myun, Yongin-Si, Kyunggi-Do, KOREA International - Tel : 82-31 - 333 - 4093. Fax : 82-31 - 333 - 4094. Domestic - Tel : 031 - 333 - 4093. Fax : 031 - 333 - 4094. DIRECTORY A) Documentation. Page Directory Test regulations Information of Test Laboratory Equipment under Test Test Conditions Test Result Test-setup (Drawings) Test-setup (Photos) Summary 2 3 3 3 5 ~ 6 7 8 9 ~ 10 16 ~ 17 23 B) Test Data. Conducted emissions (Mains) Radiated emissions : 450 kHz - 30 MHz : 30 MHz – 1 GHz 11 ~ 13 18 ~ 20 14 ~ 15 21 ~ 22 C) Appendix File No. 02-IST-199/FB IST EMC LAB. Page 3 of 23 IST EMC Lab. San 21-8 Goan-Ri, Baekam-Myun, Yongin-Si, Kyunggi-Do, KOREA International - Tel : 82-31 - 333 - 4093. Fax : 82-31 - 333 - 4094. Domestic - Tel : 031 - 333 - 4093. Fax : 031 - 333 - 4094. TEST REGULATIONS The tests were performed according to the following regulations ; ■ - FCC Part 15, Subpart B (Unintentional Radiators, Class B) Information of Test Laboratory IST EMC Lab. San 21-8 Goan-Ri, Baekam-Myun, Yongin-Si, Kyunggi-Do, Korea International - Tel : 82-31 - 333 - 4093. Fax : 82-31 - 333 - 4094. Domestic - Tel : 031 - 333 - 4093. Fax : 031 - 333 - 4094. EQUIPMENT UNDER TEST Equipment Description : Resolution : 15inch XGA (1024 X 768 @60Hz) Color display : 16,777,216 colors Plug & Play : DDC1/DDC2B Power Saving : DPMS Power Supply Adapter : Linearity1 Electronics Co.,Ltd. LAD6019AB4 Input 100~240VAC 1.5A 50~60Hz Output 12VDC 3A Option : A/V Speaker : Max 4W [2W X 2W] File No. 02-IST-199/FB IST EMC LAB. Page 4 of 23 IST EMC Lab. San 21-8 Goan-Ri, Baekam-Myun, Yongin-Si, Kyunggi-Do, KOREA International - Tel : 82-31 - 333 - 4093. Fax : 82-31 - 333 - 4094. Domestic - Tel : 031 - 333 - 4093. Fax : 031 - 333 - 4094. EUT Type : Table-Top. Floor-Standing. Table-Top and Floor-Standing(Combination). Operation – mode of the E.U.T. : The equipment under test was operated during the measurement under following conditions : Standby. Operational Condition : 1) Scrolling “H” characters under MS Windows 98, Test mode : 1024 X 768, 75 Hz 2) Displaying color bar. Configuration of the equipment under test : Following peripheral devices and interface cables were connected during the measurement : Equipment Type Brand Serial No. PC Brio BA600/550 HP SG01603782 Keyboard SK-2502C HP M000456678 PS/2 Mouse M-S48A HP LZE01000039 Serial Mouse M-S428 Logitech LCA53305547 Printer A0302384 Northern Telecom 26633S60168 Pattern Generator PM5418 Fluke 945205418003 Connecting Interface Cables : - Unshielded AC power cable : 1.8 m - Unshielded DC power cable : 1.5 m - Shielded monitor’s signal cable : 1.5 m - Shielded printer’s signal cable : 1.5 m - Unshielded Audio cable : 1.2 m - Unshielded RCA cable : 1.6 m File No. 02-IST-199/FB IST EMC LAB. Page 5 of 23 IST EMC Lab. San 21-8 Goan-Ri, Baekam-Myun, Yongin-Si, Kyunggi-Do, KOREA International - Tel : 82-31 - 333 - 4093. Fax : 82-31 - 333 - 4094. Domestic - Tel : 031 - 333 - 4093. Fax : 031 - 333 - 4094. TEST CONDITIONS The measurement of the conducted emissions (Interference voltage) was performed in a shielded room. Test location : Shielded room. No.1 Compact chamber 2 Used testing instruments : Name Type Manufacturer Calibration. Date Serial Number ESH 3 Test Receiver Rohde & Schwarz Jul. 25, 2002 892108/018 3725/2 LISN EMCO Aug. 22, 2002 9101-2068 KNW-407 LISN Hyup-Rip Aug. 21, 2002 8-883-10 ESH 3-Z2 Pulse Limiter Rohde & Schwarz Jul. 25, 2002 357.8810.52 Test - accessories : Type Manufacturer Aneroid Barometer Sato Hygrometer Sato Measurement Procedures : Conducted emissions measurments were made in accordance with ANSI C-63.4-1992, “Method of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz”. The measurement were performed over the frequency range of 0.45MHz to 30MHz using a 50 Ω /50uH LISN as the input transducer to an EMI/Field Intensity Meter. The measurements were made with the detector set for “Peak” amplitude within an IF bandwidth of 10kHz or for “quasi-peak” within a bandwidth of 9kHz. All used test-instruments as well as the test-accessories are calibrated regularly. File No. 02-IST-199/FB IST EMC LAB. Page 6 of 23 IST EMC Lab. San 21-8 Goan-Ri, Baekam-Myun, Yongin-Si, Kyunggi-Do, KOREA International - Tel : 82-31 - 333 - 4093. Fax : 82-31 - 333 - 4094. Domestic - Tel : 031 - 333 - 4093. Fax : 031 - 333 - 4094. The measurement of the radiated emissions (Electric field) in the frequency range from 30 MHz to 1GHz was performed in horizontal and vertical antenna polarization at a open-site which meet the site attenuation requirement of ANSI C63.4-1992 and a test distance of : Location : Open Site No. 1 Open Site No. 2 Open Site No. 3 Distance : 3 meters 10 meters Used testing instruments : Name Type Manu…

Text truncated - open the document above for the full version.