Q2QEE440ESL Electronic Shelf Label

Electronic shelf label EE440 The EE440 is a E-ink based electronic shelf label with a screen size of 4.4” and with 802.15.4 based wireless communication. Preliminary Specifications Manual Opticon EE440 Preliminary Specifications Manual All information subject to change without notice. Document History Model Number: EE440 Specification Number: Edition: 0.1 Original Spec Number: Date: 2015 Copyright 2015 Opticon. All rights reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon. Limited Warranty and Disclaimers PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING OR USING THE PRODUCT. Serial Number A serial number appears on all Opticon products. This official registration number is directly related to the device purchased. Do not remove the serial number from your Opticon device. Removing the serial number voids the warranty. Warranty Unless otherwise agreed in a written contract, all Opticon products are warranted against defects in materials and workmanship for two years after purchase. Opticon will repair or, at its option, replace products that are defective in materials or workmanship with proper use during the warranty period. Opticon is not liable for damages caused by modifications made by a customer. In such cases, standard repair charges will apply. If a product is returned under warranty and no defect is found, standard repair charges will apply. Opticon assumes no liability for any direct, indirect, consequential or incidental damages arising out of use or inability to use both the hardware and software, even if Opticon has been informed about the possibility of such damages. Packaging The packing materials are recyclable. We recommend that you save all packing material to use should you need to transport your scanner or send it for service. Damage caused by improper packaging during shipment is not covered by the warranty. Trademarks Trademarks used are the property of their respective owners. Opticon Inc. and Opticon Sensors Europe B.V. are wholly owned subsidiaries of OPTOELECTRONICS Co., Ltd., 12- 17, Tsukagoshi 4-chome, Warabi-shi, Saitama, Japan 335-0002. TEL +81-(0) 48-446-1183; FAX +81-(0) 48-446-1184 SUPPORT USA Europe Phone: 800-636-0090 Email: [email protected] Email: [email protected] Web: www.opticonusa.com Web: www.opticon.com 2 EE440 Specifications manual Contents 1. Abstract ..................................................................................................................................... 5 2. Overview ................................................................................................................................... 5 3. Physical Features ..................................................................................................................... 6 3.1. Dimensions ....................................................................................................................... 6 3.2. Weight ............................................................................................................................... 6 4. Environmental Specifications .................................................................................................. 6 4.1. Operating Temperature and Humidity ................................................................................ 6 4.2. Storage Temperature and Humidity ................................................................................... 6 4.3. Static Electricity ................................................................................................................. 6 4.4. Drop resistance. ................................................................................................................ 6 4.5. Dust and Drip Proof ........................................................................................................... 7 5. Controls ..................................................................................................................................... 8 6. Electrical Specifications ........................................................................................................... 8 6.1. Electrical Characteristics ................................................................................................... 8 6.2. Battery ............................................................................................................................... 9 7. Specifications ........................................................................................................................... 9 7.1. Protocol ............................................................................................................................. 9 7.1.1. The physical layer ...................................................................................................................... 9 7.1.2. The medium access control layer .............................................................................................. 9 7.2. Security ............................................................................................................................. 9 8. Labeling ................................................................................................................................... 10 8.1. Product label ................................................................................................................... 10 8.2. Shipment box labels ........................................................................................................ 12 9. Accessories ............................................................................................................................ 13 10. Packaging Specifications ....................................................................................................... 13 10.1. Individual Packaging Specification ..…

Text truncated - open the document above for the full version.

EE440 Operational description EE440 is an E-ink based ESL with a 2.4GHz radio for data communication. This product uses Direct Sequence Spread Spectrum RF technology that allows for an ultra-low power consumption combined with a reduced sensitivity to background noise. That means less interference by other radios that operate in the 2.4GHz band. The radio protocol that is used is based on the IEEE 802.15.4 standard that specifies the physical layer and media access control for low-rate wireless personal area networks. The protocol is entirely implemented, except for some small changes that have to do with the connection protocol to a base station. When the base station is not available the EE440 switches to a non- 802.15.4 standard to lower the power. That is especially useful when the EE440 is not being used for a prolonged period of time (e.g. during storage). The EE440 is intended to be operated in combination with a base station such as the EBS30 which can control a large number of EE440 and other types of ESL of the same family such as EE201. The ESL is in sleep mode almost the entire time. The device wakes up at regular intervals (called the poll time) and it then transmits a poll request to the base station. When the base station has no data to send, it just acknowledges the poll after which the ESL immediately goes back to sleep. The poll rate is configurable and is set to 20 seconds by default. A higher poll rate will decrease the power consumption but will increase the response time. Below table shows the power characteristics. The battery supply consists of two pieces of AAA batteries with below specifications: Parameter Typ Unit Remarks Operating voltage 3.0 V 2x Alkaline AAA size battery Sleep current <1 uA When the transmitter and receiver are idle Poll time 20 seconds This document must not without our permission be copied, imparted to a third party or otherwise used without authorization. Contravention will be prosecuted. Author: Signature: Date: alaz Filename and status: Level of confidentiality: EE440 Operational description.docx level of confidentiality Project: Project Date: Page: 3/6/2015 1(3) 1. Microcontroller and RF transceiver U1: cc2530 (TI) Texas Instruments CC2530 is System on Chip (SoC) solution for 802.15.4, ZigBee. cc2530 has a combined RF transceiver and 8051 MCU, in-system programmable Flash memory. Table 1 shows the cc2530 control specifications. Table 2 shows the radio specifications of cc2530. Items Specifications Remarks Type 8051 core 8-bit MCU Internal flash ROM 256KB Internal RAM 8 KB Clock frequency 32 MHz LCD Active area W 89.6 x H 67.2 mm Number of dots W 400 x H 300 Dot pitch 113 Horizontal 113 Vertical Dots per Inch Radio Modulation DSSS Frequency 2405 ~ 2480 MHz Globally approved 2.4GHz band. Baud rate 250 Kbits / second Table 1. cc2530 specifications Table 2. cc2530 Radio specifications Parameter Min Typ Max Unit Remarks Receiver sensitivity -97 -89 dBm Over the entire temp. and operating voltage range Nominal output power -3 4.5 7 dBm Frequency 2405 2480 MHz Over the entire temp. and operating voltage range Transfer rate 250Kbit/s RSSI range 100 dB Signal strength indication that can be reported to the base station Filename and status: Document: EE440 Operational description.docx Title Project: Doc. no. Date: Page: Project level of confidentiality 15-03-06 2(3) 2. Antenna The antenna is a sheet metal PIFA with operating frequency 2405-2480 MHz. Peak Gain = -4dBi 3. Balun U3: 2450BM15A0002 (Johanson Technology) The Balun which is Low Pass Filter integrated passive components has been implemented in cc2530 RF front-end. Filename and status: Document: EE440 Operational description.docx Title Project: Doc. no. Date: Page: Project level of confidentiality 15-03-06 3(3)

RF_160, Issue 03 Declaration of Authorization We Name: Opticon Sensors Europe B.V. Address: Opaallaan 35, 2132 XV Hoofddorp, The Netherlands City: Hoofddorp Country: Netherlands Declare that: Name Representative of agent: Willis Chen (1) Agent Company name: SGS Taiwan Ltd. Address: 134, Wu Kung Rd., Wuku Industrial Zone City: Wuku Area New Taipei City Country Taiwan is authorized to apply for Certification of the following product(s): Product description: ESL Electronic Shelf Label Type designation: EE440 Trademark: Opticon on our behalf. Date: 2015/02/16 City: Hoofddorp Name: Alexander Azhari (2) Function: Certification Specialist Signature: . Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

FCC, Request for non-disclosure Date: 16-Jul-10 RF_501, Issue 6 Page 1 of 1 Company Name: Opticon Sensors Europe B.V. Address: Opaallaan 35, 2132 XV Hoofddorp, The Netherlands City: Hoofddorp Country: Netherlands To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: Q2QEE440 Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (note 1): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Planned Release Date STC: (notes 2, 3, 4, 5) Date: 2015/02/16 Name and signature of applicant: Alexander Azhari Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

Report No.: E2/2015/10022 FCC ID: Q2QEE440 Issue Date: Feb. 12, 2015 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (8862) 22993279 f (8862) 22980488 www.tw.sgs.com Member of SGS Group EXTERNAL PHOTOGRAPHS OF EUT Report No.: E2/2015/10022 FCC ID: Q2QEE440 Issue Date: Feb. 12, 2015 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (8862) 22993279 f (8862) 22980488 www.tw.sgs.com Member of SGS Group Front View of EUT Back View of EUT Report No.: E2/2015/10022 FCC ID: Q2QEE440 Issue Date: Feb. 12, 2015 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (8862) 22993279 f (8862) 22980488 www.tw.sgs.com Member of SGS Group Side View of EUT – 1 Side View of EUT – 2 Report No.: E2/2015/10022 FCC ID: Q2QEE440 Issue Date: Feb. 12, 2015 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (8862) 22993279 f (8862)…

Text truncated - open the document above for the full version.

Report No.: E2/2015/10022 FCC ID: Q2QEE440 Issue Date: Feb. 12, 2015 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (8862) 22993279 f (8862) 22980488 www.tw.sgs.com Member of SGS Group INTERNAL PHOTOGRAPHS OF EUT Report No.: E2/2015/10022 FCC ID: Q2QEE440 Issue Date: Feb. 12, 2015 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (8862) 22993279 f (8862) 22980488 www.tw.sgs.com Member of SGS Group Open View of EUT-1 Open View of EUT-2 Report No.: E2/2015/10022 FCC ID: Q2QEE440 Issue Date: Feb. 12, 2015 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (8862) 22993279 f (8862) 22980488 www.tw.sgs.com Member of SGS Group Open View of EUT-3 Internal View of EUT-1 Report No.: E2/2015/10022 FCC ID: Q2QEE440 Issue Date: Feb. 12, 2015 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (8862) 22993279 f (88…

Text truncated - open the document above for the full version.

Report No.: E2/2015/10022 FCC ID: Q2QEE440 Issue Date: Feb. 12, 2015 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (8862) 22993279 f (8862) 22980488 www.tw.sgs.com Member of SGS Group MAXIMUM PERMISSIBLE EXPOSURE (MPE) Standard Applicable According to 1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Com- mission’s guideline. This is a Mobile device, the MPE is required. According to 1.1310 and 2.1093 RF exposure is calculated. Limits for Maximum Permissive Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minute) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *(100) 30 1.34-30 824/f 2.19/f *(180/f 2 ) 30 30-300 27.5 0.073 0.2 30 300-1500 / / F/1500 30 1500-15000 / / 1.0 30 F = frequency in MHz * = Plane-wave equipment power density Report No.: E2/2015/10022 FCC ID: Q2QEE440 Issue Date: Feb. 12, 2015 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (8862) 22993279 f (8862) 22980488 www.tw.sgs.com Member of SGS Group Maximum Permissible Exposure (MPE) Evaluation Frequency (MHz) Output Power (dBm) Output Power (W) Limit (W) 2405 -0.24 0.0009 1 2440 -0.70 0.0009 1 2480 -1.10 0.0008 1 Prediction of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 S=PG/4R 2 Where: S = Power density P = Power input to antenna G = Power gain of the antenna in the direction of interest relative to an isotropic radiator R = Distance to the center of radiation of the antenna Maximum peak output power at antenna input terminal: -0.24 (dBm) Maximum peak output power at antenna input terminal: 0.946237161 (mW) Duty cycle: 100 (%) Maximum Pav : 0.946237161 (mW) Antenna gain (Maximum): -4 (dBi) Antenna gain (linear): 0.398107171 (numeric) Prediction distance: 20 (cm) Prediction frequency: 2405 (MHz) MPE limit for uncontrolled exposure at prediction1 (mW/cm2) Power density at predication frequency at 20 (cm)0.0000750 (mW/cm^2) Measurement Result The predicted power density level at 20 cm is 0.000075 mW/cm 2 . This is below the uncontrolled expo- sure limit of 1 mW/cm 2 at 2405MHz. ~ End of Report ~

Report No.: E2/2015/10022 FCC ID: Q2QEE440 Issue Date: Feb. 12, 2015 Page: 1 of 45 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documen…

Text truncated - open the document above for the full version.