Q35-MOD6RF Transceiver Module

Carematix #### Adapter Connecting to a Device 1. Please ensure that the batteries are installed in the adapter. See below for instructions on how to install batteries. 2. Connect the device to the adapter using the adapter’s cable. Make sure that the connection is secure. Transmitting a Measurement 1. Take a measurement as you normally do using the device. 2. If your adapter does not have a Send button, then the measurement will be automatically transmitted from the device to the adapter. 3. If your adapter does have a Send button, please press it once after the device has taken the measurement. Your measurement will now be send to the adapter and then on to the receiver hub. 4. Do not yank at the cable as its connection to the peak flow meter may become unsecured. Helpful Hints 1. Please insure that the device and the adapter fit together securely. 2. The connector will fit properly only one way. If resistance is encountered while connecting, please check and reorient connector if necessary. 3. Please check batteries after approximately 6 months of regular use and replace if necessary. Power Supply Battery Installation 1. Open the battery compartment cover on the underside of the adapter. 2. When the compartment is opened, insert 2 AA batteries, making sure they are oriented correctly. 3. Replace the battery compartment cover. Notes: 1. Since the batteries installed from the factory at the time of shipment are monitor batteries, their life may be shorter than regular, new batteries. Care and Maintenance 1. Because this unit uses precision parts, care should be taken to avoid extremes in temperature variations, humidity, shock, dust and direct sunlight. 2. Do not open or take apart the adapter or its components. There are no user serviceable parts. 3. Do not drop or strike this unit. 5. If the unit is to be stored for a long period, please disconnect it from the peak flow meter and be sure to remove batteries before storage. Specifications Operating Principle Serial interface Power Supply 2 AA batteries Operating Temperature +50°F to +104°F Relative humidity 15 to 90% Storage Temperature -4°F to +122°F Specifications are subject to change without prior notice due to improvements in performance and quality. Warranty This equipment is guaranteed for the period of 1 year after the date of purchase against manufacturing defects when returned along with the proof of date of purchase. During this period, the unit will be repaired or replaced free of charge if the failure is attributable to faulty design or manufacture. This warranty does not cover damage or malfunctions caused by improper handling or use contrary to the instructions in this manual. Opening or taking apart the unit or its components will void the warranty. Should your unit require service, please e-mail to us at [email protected] SAFETY PRECAUTION Regarding Use of Information From the Carematix #### The Carematix #### Adapter is designed to provide supplemental information only. Changes in treatment or therapy should not be based on information provided by the Adapter. The clinician is expected to exercise clinical judgment and independently corroborate the information provided by the Carematix #### Adapter prior to making any treatment or therapy decisions Therapy or intervention decisions should not be based on information provided by the Carematix #### Adapter. Any changes in therapy should be based on an actual examination by the clinician. SAFETY PRECAUTIONS Batteries should not be left in the Carematix 7100 Adapter for an extended period of time that the Adapter is not is use. Batteries should be disposed of properly according to the manufacturer’s recommendations. If the monitor is accompanied by a base station (hub) requiring plugging into a phone line, the line should NEVER be plugged in during a thunderstorm. CAUTION Changes or modifications to this equipmen t not expressly approved by Carematix, Inc. could void the user’s authority to operate the equipment. NOTICE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Carematix , Inc . 2 N ORTH L A S ALLE S TREET , S UITE 1805 C HICAGO , IL 60602 WEB SITE: HTTP//WWW.CAREMATIX.COM

FCC ID: Q35-MOD6DD4ULX1 LIST OF CRYSTAL FREQUENCIES The following is a list of crystal frequencies used in the Transmitter Model No: AS01HUB5A0001A and AS01HUB5A0001B 16 MHz. & .032768 MHz

Letter of Agency Date: May 4, 2004 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: Please be advised that Carematix, Inc. authorizes D.L.S. Electronic Systems, Inc. to act on our behalf, until otherwise notified, for applications submitted to American Telecommunications Certification Body, Inc. (ATCB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002(b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you for your attention to this matter. Signatory, Arnom C. Rowe EMC ENGINEER EMC-001375-NE D.L.S. Electronic Systems, Inc. FCC Labeling Requirements and Information Date: May 4, 2004 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: FCC Labeling Requirements FCC ID: Q35-MOD6 The following label information is required by the FCC Rules and Regulations for certified devices. Also attached, please find marketing information required by the FCC Rules and Regulations. Thank you for your attention to these matters. Sincerely, Arnom C. Rowe EMC ENGINEER EMC-001375-NE D.L.S. Electronic Systems, Inc. Request for Confidentiality Date: May 4, 2004 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: Certification Application FCC ID: Q35-MOD6 Please be advised that the following information is to be held confidential and behalf of APPLICANT NAME: • Block Diagram • Schematics • Parts Lists The application contains technical information which Carematix, Inc. deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Signatory Arnom C. Rowe EMC ENGINEER EMC-001375-NE D.L.S. Electronic Systems, Inc. Modification Letter Date: May 4, 2004 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: Certification Application FCC ID: Q35-MOD6 Please be advised that the following information is a list of modifications that will be included in the production process for the above-referenced equipment. Change 1: Model Number AS0HUB5A0001A (longer antenna) output power was reduced approximately by 3 dB to meet the fundamental radiated emissions requirements. Change 2: Model Number AS0HUB5A0001B (shorter antenna) output power was reduced by 2.5 dB to meet the fundamental radiated emissions requirements. Change 3: In both models the shielded was well grounded to meet low radiated (915.19 MHz) emission requirements. Change 4: In AS0HUB5A0001B the 4.7 pF cap was moved closed to antenna to meet harmonic emissions requirements. Thank you for your attention to this matter. Signatory Arnom C. Rowe EMC ENGINEER EMC-001375-NE D.L.S. Electronic Systems, Inc. Manufacturer’s Letter Date: May 4, 2004 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: Certification Application FCC ID: Q35-MOD6 To Whom It May Concern: Please be advised that the manufacturer will ensure that the above-referenced model will be manufactured in accordance with the FCC Rules and Regulations. Thank you for your attention to this matter. Signatory Arnom C. Rowe EMC ENGINEER EMC-001375-NE D.L.S. Electronic Systems, Inc.

FCC ID: Q35-MOD6 D.L.S. ELECTRONIC SYSTEMS, INC. 1250 Peterson Drive Wheeling, Illinois 60090 FCC Authorization & Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21045-0429 Gentlemen: We are submitting for Carematix Inc., a Carematix Weight Scale, Model Number(s) AS01HUB5A0001A and AS01HUB5A0001B, with a FCC ID: Q35-MOD6 for certification. This unit has been tested and complies to Part 15, Subpart C. If there are any questions in regards to this application, please call D.L.S. Electronic Systems, Inc. at (847) 537 6400. Enclosed you will find a copy of our test report with the information and results of tests that is required under Part 15, Section 15.249. Thank you for your assistance in this matter. Sincerely, Arnom C. Rowe EMC-001375-NE FCC ID: Q35-MOD6 TABLE OF CONTENTS FCC ID: Q35-MOD6 EXHIBIT 1 LABEL FCC ID: Q35-MOD6 FCC ID: Q35-MOD6 EXHIBIT 2 AUTHORIZATION FCC ID: Q35-MOD6 FCC ID: Q35-MOD6 EXHIBIT 3 DESCRIPTION OF MEASUREMENT FACILITIES Site on File with the FCC ID Number: 31040/SIT FCC ID: Q35-MOD6 EXHIBIT 4 TECHNICAL REPORT FCC ID: Q35-MOD6 EXHIBIT 4a TECHNICAL REPORT Manufacturer: Carematix Inc. Model Number: AS01HUB5A0001A and AS01HUB5A0001B Additional Models: None Users’ Manual: “INCLUDED” FCC ID: Q35-MOD6 EXHIBIT 4b INSTALLATION & OPERATING INSTRUCTIONS (USER’S MANUAL) FCC ID: Q35-MOD6 FCC ID: Q35-MOD6 EXHIBIT 5 EXPOSITORY STATEMENT FCC ID: Q35-MOD6 EXHIBIT 5a DESCRIPTION OF OPERATION FCC ID: Q35-MOD6 FCC ID: Q35-MOD6 EXHIBIT 5b LIST OF CRYSTAL FREQUENCIES FCC ID: Q35-MOD6 FCC ID: Q35-MOD6 EXHIBIT 5c BLOCK DIAGRAMS AND SCHEMATICS FCC ID: Q35-MOD6 FCC ID: Q35-MOD6 FCC ID: Q35-MOD6 EXHIBIT 5d PARTS LIST FCC ID: Q35-MOD6 FCC ID: Q35-MOD6 EXHIBIT 6 PHOTOGRAPHS FCC ID: Q35-MOD6 TOP VIEW FCC ID: Q35-MOD6 BOTTOM VIEW FCC ID: Q35-MOD6 FCC ID: Q35-MOD6 FCC ID: Q35-MOD6 EXHIBIT 7 TEST REPORT FCC ID: Q35-MOD6

Adapter (Bottom View) Label Stereo Pin Connector Stereo Pin Connector Adapter (Bottom View) Label

FCC ID MOD6 PCB (Bottom View)

Adapter (Bottom View) Label Stereo Pin Connector

FCC Label for the Carematix Module Transceiver: Carematix Inc. XYZ Adapter Model Number: #### FCC ID: Q35-MOD6

Antenna (Top View) RF Shield (Top View) Stereo Pin Connector (Top View) Adapter Housing (Top View) DC-DC Converter PCB (Top View) MOD6 PCB (Top View) Stereo Pin Connector MOD6 PCB (Top View) Housing Cover DC-DC Converter PCB (Top View) Battery Terminal Antenna MOD6 PCB (Top View) DB9 Connector RF Shield (Top View)

General Description of the Carematix Module Transceiver: The Carematix module transceiver will work with any device that sends its data serially. It operates at 915.05 MHz and uses Frequency Shift Keying (FSK) modulation to transmit data. The transceiver microcontroller is usually in the sleep state, but has a running internal Real Time Clock (RTC). This sleep state can either be interrupted when it receives new data reading from the device or when a previously pending reading needs to be sent to a CPH200 Hub. All new data readings sent by the device are saved onto the EEPROM by the transceiver microcontroller along with the current (real-time) timestamp. After the transceiver has received new data readings it uses a custom RF protocol to transmit the data to the CPH200 Hub.

1250 Peterson Dr., Wheeling, IL 60090 Company: Carematix Inc. Model Tested: AS01HUB5A0001A and AS01HUB5A0001B Report Number: 10594 FCC Rules and Regulations / Intentional Radiators Operational in the 902-928 MHz, 2400-2483.5 MHz, 5725-5875 MHz, and 24.0-24.25 GHz Bands Part 15, Subpart C, Section 15.249 THE FOLLOWING ''MEETS'' THE ABOVE TEST SPECIFICATION Formal Name: Carematix Weight Scale Kind of Equipment: Medical Test Configuration: Modular (can be designed in as a module in various end products) (Tested at 6 vdc) FCC ID Number: Q35-MOD6 Frequency Band: 902-928 MHz Model Number(s): AS01HUB5A0001A and AS01HUB5A0001B Model(s) Tested: AS01HUB5A0001A and AS01HUB5A0001B Serial Number(s): NA Date of Tests: February 26 & 27, 2004 Test Conducted For: Carematix Inc. 2 North LaSalle Street, Suite 1805 Chicago, Illinois 60602 NOTICE: “This report must not be used by the client to claim product endorsement by NVLAP or any agency of the U.S. Government”. Please see the "Additional Description of Equipment Under Test" page listed inside of this report. This report must not be reproduced (except in full), without the approval of D.L.S. Electronic Systems. Page - 1 - 1250 Peterson Dr., Wheeling, IL 60090 Company: Carematix Inc. Model Tested: AS01HUB5A0001A and AS01HUB5A0001B Report Number: 10594 SIGNATURE PAGE Report By: Arnom C. Rowe Test Engineer EMC-001375-NE Reviewed By: William Stumpf OATS Manager Approved By: Brian Mattson General Manager Company Official: Carematix Inc. Page - 2 - 1250 Peterson Dr., Wheeling, IL 6009 Company: Carematix Inc. Model Tested: AS01HUB5A0001A and AS01HUB5A0001B Report Number: 10594 Page -3- 1250 Peterson Dr., Wheeling, IL 6009 Company: Carematix Inc. Model Tested: AS01HUB5A0001A and AS01HUB5A0001B Report Number: 10594 Page -4- 1250 Peterson Dr., Wheeling, IL 6009 Page -4- Company: Carematix Inc. Model Tested: AS01HUB5A0001A and AS01HUB5A0001B Report Number: 10594 1250 Peterson Dr., Wheeling, IL 6009 Page -5- Company: Carematix Inc. Model Tested: AS01HUB5A0001A and AS01HUB5A0001B Report Number: 10594 1250 Peterson Dr., Wheeling, IL 6009 Company: Carematix Inc. Model Tested: AS01HUB5A0001A and AS01HUB5A0001B Report Number: 10594 Page -6- 1250 Peterson Dr., Wheeling, IL 6009 Company: Carematix Inc. Model Tested: AS01HUB5A0001A and AS01HUB5A0001B Report Number: 10594 Page -7- 1250 Peterson Dr., Wheeling, IL 6009 Company: Carematix Inc. Model Tested: AS01HUB5A0001A and AS01HUB5A0001B Report Number: 10594 Page -8- 1250 Peterson Dr., Wheeling, IL 6009 Company: Carematix Inc. Model Tested: AS01HUB5A0001A and AS01HUB5A0001B Report Number: 10594 Page -9- 1250 Peterson Dr., Wheeling, IL 6009 Company: Carematix Inc. Model Tested: AS01HUB5A0001A and AS01HUB5A0001B Report Number: 10594 Page -10- 1250 Peterson Dr., Wheeling, IL 6009 Company: Carematix Inc. Model Tested: AS01HUB5A0001A and AS01HUB5A0001B Report Number: 10594 Page -11- 1250 Peterson Dr., Wheeling, IL 6009 Company: Carematix Inc. Model Tested: AS01HUB5A0001A and AS01HUB5A0001B Report Number: 10594 Page -12- 1250 Peterson Dr., Wheeling, IL 6009 Company: Carematix Inc. Model Tested: AS01HUB5A0001A and AS01HUB5A0001B Report Number: 10594 TABLE OF CONTENTS i. Cover Page...........................................................................................................................1 ii. Signature Page.....................................................................................................................2 iii. NVLAP Certificate of Accreditation...................................................................................3 iv. NVLAP Scope of Accreditation..........................................................................................4 v. Table of Contents...............................................................................................................13 1.0 Summary of Test Report....................................................................................................15 2.0 Introduction........................................................................................................................15 3.0 Object.................................................................................................................................15 4.0 Test Set-Up........................................................................................................................16 5.0 Test Equipment..................................................................................................................17 6.0 Ambient Measurements.....................................................................................................18 7.0 Description of Test Sample................................................................................................19 8.0 Additional Description of Test Sample..............................................................................22 9.0 AS01HUB5A0001A Photo Information and Test Set-Up.................................................23 10.0 AS01HUB5A0001A Radiated Photos Taken During Testing...........................................24 10.0 AS01HUB5A0001A Conducted Photos Taken During Testing........................................27 9.0 AS01HUB5A0001B Photo Information and Test Set-Up.................................................28 10.0 AS01HUB5A0001B Conducted Photos Taken During Testing........................................31 11.0 Results of Tests..................................................................................................................32 12.0 Conclusion.........................................................................................................................32 TABLE 1 – EQUIPMENT LIST...................................................................................................33 Page -13- 1250 Peterson Dr., Wheeling, IL 6009 Company: Carematix Inc. Model Tested: AS01HUB5A0001A and AS01HUB5A0001B Report Number: 10594 TABLE OF CONTENTS Appendix A – Electric Field R…

Text truncated - open the document above for the full version.