Q9DAPIN0755ACCESS POINT

Mark Hill Regulatory Compliance Engineer Hewlett Packard Enterprise Company [email protected] +1 408-807-0476 6280 America Center Drive San Jose, CA 95002 USA hpe.com Date: 19-Jul-2024 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(5) Attestation FCC ID: Q9DAPIN0755 1. Hewlett Packard Enterprise Company (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2. Hewlett Packard Enterprise Company (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Mark Hill Hewlett Packard Enterprise Company 6280 America Center Dr, San Jose, CA 95002 USA

Mark Hill Regulatory Compliance Engineer Hewlett Packard Enterprise Company [email protected] +1 408-807-0476 6280 America Center Drive San Jose, CA 95002 USA hpe.com Date: 19-Jul-2024 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) Agent Designation Attestation FCC ID: Q9DAPIN0755 FCC FRN: 0026486175 To whom it may concern: Hewlett Packard Enterprise Company (“the applicant”) as required by section §2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC ID: Q9DAPIN0755 The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility under CFR 47 §2.929(c) to inform the FCC whenever the agent information changes. Mark Hill Hewlett Packard Enterprise Company 6280 America Center Dr, San Jose, CA 95002 USA [email protected] Sincerely yours, Mark Hill Hewlett Packard Enterprise Company 6280 America Center Dr, San Jose, CA 95002 USA

Page 1 of 1 Mark Hill Regulatory Compliance Engineer Hewlett Packard Enterprise Company [email protected] +1 408 8070476 Office 6280 America Center Drive San Jose, CA 95002 USA hpe.com Date: 19-Jul-2024 Software Defined Radio (SDR) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attention: OET Dept. FCC ID: Q9DAPIN0755 Regarding Certification as a Software Defined Radio This letter is to notify the FCC of our intentions regarding submitting for grant approvals as a Software Defined Radio in accordance to KDB 442812 D01 SDR Apps Guide v02r03. All supporting documentation to be approved as an SDR will be included. Sign by: Print Name: Mark Hill Title: Regulatory Compliance Engineer Company: Hewlett Packard Enterprise Company

Page 1 of 2 Mark Hill Regulatory Compliance Engineer Hewlett Packard Enterprise Company [email protected] +1 408 8070476 Office 6280 America Center Drive San Jose, CA 95002 USA hpe.com Date: 19-Jul-2024 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern: I, the undersigned, hereby authorize MRT Technology (Suzhou) Co., Ltd to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by MRT Technology (Suzhou) Co., Ltd on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing MRT Technology (Suzhou) Co., Ltd as our representative, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to us relating to the product’s compliance with requirements of the relevant standard and to make these records available when requested; Page 2 of 2 Mark Hill Regulatory Compliance Engineer Hewlett Packard Enterprise Company [email protected] +1 408 8070476 Office 6280 America Center Drive San Jose, CA 95002 USA hpe.com j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Name: Mark Hill Position: Regulatory Compliance Engineer Hewlett Packard Enterprise Company

Page 1 of 2 Mark Hill Regulatory Compliance Engineer Hewlett Packard Enterprise Company [email protected] +1 408 8070476 Office 6280 America Center Drive San Jose, CA 95002 USA hpe.com Date: 19-Jul-2024 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: Q9DAPIN0755 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Software Security Requirements Cover Letter Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until (180 days): External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Page 2 of 2 Mark Hill Regulatory Compliance Engineer Hewlett Packard Enterprise Company [email protected] +1 408 8070476 Office 6280 America Center Drive San Jose, CA 95002 USA hpe.com Best Regards, Name: Mark Hill Position: Regulatory Compliance Engineer Hewlett Packard Enterprise Company

Page 1 of 1 Mark Hill Regulatory Compliance Engineer Hewlett Packard Enterprise Company [email protected] +1 408 8070476 Office 6280 America Center Drive San Jose, CA 95002 USA hpe.com Date: 19-Jul-2024 Software Defined Radio (SDR) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attention: OET Dept. FCC ID: Q9DAPIN0755 Regarding Certification as a Software Defined Radio This letter is to notify the FCC of our intentions regarding submitting for grant approvals as a Software Defined Radio in accordance to KDB 442812 D01 SDR Apps Guide v02r03. All supporting documentation to be approved as an SDR will be included. Sign by: Print Name: Mark Hill Title: Regulatory Compliance Engineer Company: Hewlett Packard Enterprise Company

FRELEASE SANDY CHEN06/18/24 WNC CONFIDENTIAL LASER ENGRAVING,4013961-03,AGENCY , AP-755,R7PB-A2 F 2 CATHY CHEN06/18/24 06/18/24 CATHY CHEN 06/18/24 SANDY CHEN *1 *2 3 4 44.2 69.2 3±0.5 3±0.5

MRT Technology (Suzhou) Co., Ltd Report No.: 2403RSU068-U8 Phone: +86-512-66308358 Report Version: V01 Web: www.mrt-cert.com Issue Date: 2024-07-30 Template Version:0.1 1 of 13 RF Exposure Evaluation Declaration FCC ID: Q9DAPIN0755 Applicant: Hewlett Packard Enterprise Company Product: ACCESS POINT Model No.: APIN0755 Trademark: FCC Rule Part(s): FCC Part 2.1091 Result: Complies Evaluation Date: 2024-07-30 Reviewed By: Jame Yuan Approved By: Robin Wu The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standards through the calibration of the equipment and evaluated measurement uncertainty herein. The test report shall not be reproduced except in full without the written approval of MRT Technology (Suzhou) Co., Ltd. Report No.: 2403RSU068-U8 2 of 13 Revision History Report No. Version Description Issue Date Note 2403RSU038-U8 V01 Initial Report 2024-07-30 Valid Report No.: 2403RSU068-U8 3 of 13 CONTENTS Description Page 1. General Information ............................................................................................................................... 4 1.1. Applicant ........................................................................................................................................4 1.2. Manufacturer .................................................................................................................................4 1.3. Testing Facility ...............................................................................................................................4 1.4. Product Information .......................................................................................................................5 1.5. Antenna Details .............................................................................................................................6 1.6. Device Classification .....................................................................................................................7 1.7. Applied Standards .........................................................................................................................7 2. RF Exposure Evaluation ........................................................................................................................ 8 2.1. Limits .............................................................................................................................................8 2.2. MPE Exemptions ...........................................................................................................................9 2.3. Calculated Result ....................................................................................................................... 12 Report No.: 2403RSU068-U8 4 of 13 1. General Information 1.1. Applicant Hewlett Packard Enterprise Company 6280 America Center Drive, San Jose CA 95002, United States 1.2. Manufacturer Hewlett Packard Enterprise Company 6280 America Center Drive, San Jose CA 95002, United States 1.3. Testing Facility Test Site – MRT Suzhou Laboratory Laboratory Location (Suzhou - Wuzhong) D8 Building, No.2 Tian’edang Rd., Wuzhong Economic Development Zone, Suzhou, China Laboratory Location (Suzhou - SIP) 4b Building, Liando U Valley, No.200 Xingpu Rd., Shengpu Town, Suzhou Industrial Park, China Laboratory Accreditations A2LA: 3628.01 CNAS: L10551 FCC: CN1166 ISED: CN0001 VCCI: R-20025 G-20034 C-20020 T-20020 R-20141 G-20134 C-20103 T-20104 Test Site – MRT Shenzhen Laboratory Laboratory Location (Shenzhen) 1G, Building A, Junxiangda Building, Zhongshanyuan Road West, Nanshan District, Shenzhen, China Laboratory Accreditations A2LA: 3628.02 CNAS: L10551 FCC: CN1284 ISED: CN0105 Test Site – MRT Taiwan Laboratory Laboratory Location (Taiwan) No. 38, Fuxing 2nd Rd., Guishan Dist., Taoyuan City 333, Taiwan (R.O.C.) Laboratory Accreditations TAF: 3261 FCC: 291082, TW3261 ISED: TW3261 Report No.: 2403RSU068-U8 5 of 13 1.4. Product Information Product Name ACCESS POINT Model No. APIN0755 Wi-Fi Specification 802.11a/b/g/n/ac/ax/be Bluetooth Specification BLE only ZigBee Specification 802.15.4 GNSS Specification GPS, Galileo Antenna Information Refer to Section 1.5 Power Type AC Adapter Input or PoE Input Operating Environment Indoor Use Remark: The information of EUT was provided by the manufacturer, and the accuracy of the information shall be the responsibility of the manufacturer. Report No.: 2403RSU068-U8 6 of 13 1.5. Antenna Details BLE/ZigBee Antenna Type Frequency Band (GHz) Antenna Gain (dBi) Ant 7 Ant 8 Ant 14 PIFA 2.4 ~ 2.5 4.4 2.1 5.7 Wi-Fi Antenna Type Wi-Fi Antenna Frequency Band (GHz) T X Paths Directional Gain (dBi) Uncorrelated Correlated PIFA Ant 1 5.15 ~ 5.9 4 3.6 9.5 PIFA Ant 2 Alford Loop Ant 3 Alford Loop Ant 4 Alford Loop Ant 5 5.925 ~ 7.125 4 3.6 9.4 Alford Loop Ant 6 PIFA Ant 7 PIFA Ant 8 Dipole Ant 9 2.4 ~ 2.5 4 3.10 9.00 Dipole Ant 10 PIFA Ant 11 PIFA Ant 12 Note: 1, The EUT supports Cyclic Delay Diversity (CDD) mode, and CDD signals are correlated. 2, The EUT also supports Beam Forming mode, and the Beam Forming support 802.11n/ac/ax/be, not include 802.11a/b/g. 3, For beamforming operation, Aruba OS automatically backs power down based on CDD power. 4, The detail calculation method of directional gain refers to antenna specification provided by the applicant. Report No.: 2403RSU068-U8 7 of 13 1.6. Device Classification According to the user manual, this device is classified as a Mobile Device. So, the RF exposure evaluation requirements of § 2.1091 for mobile device exposure conditions subject to MPE limits. 1.7. Applied Standards According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards: ⚫ FCC Part 2.1091 & KDB 447498 D04 Interim General RF Exposure Guidance v01 Report No.: 2403RSU068-U8 8 of 13 2. RF Exposure Evaluation 2.1. Test Limit According to FCC §1.1310: The crit…

Text truncated - open the document above for the full version.

Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 1/98 Antenna Composite Gain Test Report 1. Test Information Equipment Campus Access Points Brand Name Aruba Model Name AP755 Applicant Aruba Manufacturer Aruba 2. Testing Location Testing Location WNC ADD：20 Park Ave. ll, Hsinchu Science Park, Hsinchu 308 Taiwan Test Condition Test Engineer Test Environment ( O C / %) Test Date Radiated Leo Chuang 20-24 / 45-60 03.20.2024~04.03.2024 3. Test Frequency Band (MHz) Test Frequency (MHz) 1165-1185 1176 1560-1590 1575 2401-2423 2401 2441-2463 2452 2473-2484 2484 5150-5250 5150 5470-5725 5550 5725-5850 5850 5850~5895 5850, 5895 5925-6425 5925 6425-6525 6555 6875-7125 7125 4. Antenna Information Ant. Position Brand Name Model Name Ant. Type Connector Antenna 1 (5G/6G) Aruba 95XPAD15.G38 PIFA I-PEX Antenna 2 (5G/6G) Aruba 95XPAD15.G39 PIFA I-PEX Antenna 3 (5G/6G) Aruba 95XPAD15.G40 Alford Loop I-PEX Antenna 4 (5G/6G) Aruba 95XPAD15.G41 Alford Loop I-PEX Antenna 5 (6G) Aruba 95XPAD15.G42 Alford Loop I-PEX Antenna 6 (6G) Aruba 95XPAD15.G43 Alford Loop I-PEX Antenna 7 (2G/6G) Aruba 95XPAD15.G44 PIFA I-PEX Antenna 8 (2G/6G) Aruba 95XPAD15.G45 PIFA I-PEX Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 2/98 Antenna 9 (2G/5G/6G) Aruba 95XPAD15.G46 Dipole I-PEX Antenna 10 (2G/5G/6G) Aruba 95XPAD15.G47 Dipole I-PEX Antenna 11 (2G/5G/6G) Aruba 95XPAD15.G48 PIFA I-PEX Antenna 12 (2G/5G/6G) Aruba 95XPAD15.G49 PIFA I-PEX Antenna 13 (GPS) Aruba 95XPAD15.G50 PIFA I-PEX Antenna 14 (BLE) Aruba 95XPAD15.G51 Alford Loop I-PEX 5. Test Configuration ETS-AMS 8500 System Item Device Type/Model Serial# Manufacturer Cal. Date Cal. Due Date 1 Anechoic Chamber ETS-AMS 8500 ETS-Lindgren 2024/03/09 2025/03/08 2 Turn Table ETS ETS-Lindgren 2024/03/09 2025/03/08 3 Multi-Device Positioning Controller Model 2090 142407 ETS-Lindgren 2024/03/09 2025/03/08 4 Network Analyzer E5071C 0171E5485A6J Keysight 2023/05/31 2024/05/30 5 Horn antenna 3164-08 140264 ETS-Lindgren 2024/03/09 2025/03/08 6 Cable 7.5m 400MHz to 18GHz (H-pol) SS402 00100A1F5A1XXS Woken 2024/03/09 2025/03/08 7 Cable 7.5m 400MHz to 18GHz (V-pol) SS402 00100A1F5A1XXS Woken 2024/03/09 2025/03/08 8 Cable 14m 400MHz to 18GHz SS402 00100A1F5A1XXS Woken 2024/03/09 2025/03/08 9 Temperature & Humidity Meter HTC-01 Metravi 2024/03/09 2025/03/08 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 3/98 6. Reference Calibration 7. Test Method The “great circle” cut method, whereby the Measurement Antenna remains fixed and the EUT is rotated about two axes in sequential order.The radiated RF performance of the Equipment Under Test (EUT) is measured by sampling the radiated transmit power of the mobile at various locations surrounding the device. A three-dimensional characterization of the 'transmit' performance of the EUT is pieced together by analyzing the data from the spatially distributed measurements. Data points taken every 15 degrees in the theta and in the phi axes are deemed sufficient to fully characterize the EUT's Far-Field radiation pattern and total radiated power All of the measured power values will be integrated Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 4/98 8. Measured Values and Calculation of Correlated / Uncorrelated Gains Antenna Peak Gain Table (Ant. Position：5G/6G Ant.1~4) Band (MHz) 5150-5470 5470-5725 5725-5850 5850~5895 Frequency (MHz) 5150 5550 5850 5850 5895 Ant.1 Max Gain (dBi) 3.7 5.5 5.4 5.4 5.5 Ant.2 Max Gain (dBi) 3.4 5.8 4.4 4.4 4.5 Ant.3 Max Gain (dBi) 3.8 4.4 3.5 3.5 4.2 Ant.4 Max Gain (dBi) 4.7 4.6 4.1 4.1 4.1 Max Gain (dBi) 4.7 5.8 5.4 5.4 5.5 Band (MHz) 5925-6425 6425-6525 6525-7125 Frequency (MHz) 5925 6555 7125 Ant.1 Max Gain (dBi) 5.1 5.3 6.0 Ant.2 Max Gain (dBi) 4.8 5.8 4.8 Ant.3 Max Gain (dBi) 4.6 3.6 3.3 Ant.4 Max Gain (dBi) 4.0 4.3 3.0 Max Gain (dBi) 5.1 5.8 6.0 Antenna Peak Gain Table (Ant. Position：6G Ant.5~8) Band (MHz) 5925-6425 6425-6525 6525-7125 Frequency (MHz) 5925 6555 7125 Ant.5 Max Gain (dBi) 4.4 4.3 4.6 Ant.6 Max Gain (dBi) 4.1 4.6 4.6 Ant.7 Max Gain (dBi) 5.9 5.4 5.7 Ant.8 Max Gain (dBi) 5.2 5.7 5.3 Max Gain (dBi) 5.9 5.7 5.7 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 5/98 Antenna Peak Gain Table (Ant. Position：2G/5G/6G Ant.9~12) Band (MHz) 2401-2423 2441-2463 2473-2484 Frequency (MHz) 2401 2452 2484 Ant.9 Max Gain (dBi) 4.8 5.0 4.7 Ant.10 Max Gain (dBi) 4.5 5.0 5.2 Ant.11 Max Gain (dBi) 2.3 3.6 4.1 Ant.12 Max Gain (dBi) 2.8 3.2 3.2 Max Gain (dBi) 4.8 5.0 5.2 Band (MHz) 5150-5470 5470-5725 5725-5850 5850~5895 Frequency (MHz) 5150 5550 5850 5850 5895 Ant.9 Max Gain (dBi) 4.4 5.6 5.6 5.6 5.7 Ant.10 Max Gain (dBi) 4.9 5.1 5.0 5.0 4.4 Ant.11 Max Gain (dBi) 4.6 3.6 4.0 4.0 4.0 Ant.12 Max Gain (dBi) 3.9 4.7 5.4 5.4 5.7 Max Gain (dBi) 4.9 5.6 5.6 5.6 5.7 Band (MHz) 5925-6425 6425-6525 6525-7125 Frequency (MHz) 5925 6555 7125 Ant.9 Max Gain (dBi) 5.6 5.7 5.3 Ant.10 Max Gain (dBi) 4.6 5.2 5.0 Ant.11 Max Gain (dBi) 4.5 3.3 4.2 Ant.12 Max Gain (dBi) 4.7 4.1 5.0 Max Gain (dBi) 5.6 5.7 5.3 Antenna Peak Gain Table (Ant. Position：GPS Ant.13) Band (MHz) 1165-1185 1560-1590 Frequency (MHz) 1176 1575 Ant.13 Max Gain (dBi) 2.9 3.3 Antenna Peak Gain Table (Ant. Position：BLE Ant.7~8, 14) Band (MHz) 2401-2423 2441-2463 2473-2484 Frequency (MHz) 2401 2452 2484 Ant.7 Max Gain (dBi) 2.9 3.9 4.4 Ant.8 Max Gain (dBi) 2.1 2.1 2.1 Ant.14 Max Gain (dBi) 5.2 5.7 5.3 Max Gain (dBi) 5.2 5.7 5.3 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 6/98 Antenna Correlated / Uncorrelated Gain Table (Ant. Position：5G/6G Ant.1~4) Frequency (MHz) Correlated Gain (dBi) Uncorrelated Gain (dBi) 5150 8.4 2.7 5550 9.5 3.6 5850 9.0 3.0 5895 8.1 2.4 5925 8.1 2.4 6555 9.2 3.2 7125 8.5 2.8 Antenna Correlated / Uncorrelated Gain Table (Ant. Position：6G Ant.5~8) Frequency (MHz) Correlated Gain (dBi) Uncorrelated Gain (dBi) 5925 9.1 3.1 6555 9.0 3.0 7125 9.4 3.6 Antenna Correlated / Uncorrelated Gain Table (Ant. Position：2G/5G/6G Ant.9~12) Frequency (MHz) Correlated Gain (dBi) Uncorrelated Gain (dBi) 2401 8.2 2.4 2452 8.7 2.9 2484 9…

Text truncated - open the document above for the full version.

Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 47/98 Ant. Position：GPS Ant.13 XY_Pol._Phi_Ant.13 XY_Pol._Theta_Ant.13 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 48/98 XZ_Pol._Phi_Ant.13 XZ_Pol._Theta_Ant.13 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 49/98 YZ_Pol._Phi_Ant.13 YZ_Pol._Theta_Ant.13 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 50/98 Ant. Position：BLE Ant.14 XY_Pol._Phi_Ant.14 XY_Pol._Theta_Ant.14 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 51/98 XZ_Pol._Phi_Ant.14 XZ_Pol._Theta_Ant.14 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 52/98 YZ_Pol._Phi_Ant.14 YZ_Pol._Theta_Ant.14 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 53/98 Appendix _Radiated Total Gain Result Ant. Position：5G/6G Ant.1 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 54/98 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 55/98 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 56/98 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 57/98 Ant. Position：5G/6G Ant.2 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 58/98 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 59/98 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 60/98 Ant. Position：5G/6G Ant.3 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 61/98 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 62/98 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 63/98 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 64/98 Ant. Position：5G/6G Ant.4 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 65/98 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 66/98 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 67/98 Ant. Position：6G Ant.5 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 68/98 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 69/98 Ant. Position：6G Ant.6 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 70/98 Ant. Position：2G/6G Ant.7 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 71/98 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 72/98 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 73/98 Ant. Position：2G/6G Ant.8 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 74/98 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 75/98 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 76/98 Ant. Position：2G/5G/6G Ant.9 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 77/98

Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 78/98 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 79/98 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 80/98 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 81/98 Ant. Position：2G/5G/6G Ant.10 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 82/98 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 83/98 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 84/98 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 85/98 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 86/98 Ant. Position：2G/5G/6G Ant.11 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 87/98 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 88/98 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 89/98 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 90/98 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 91/98 Ant. Position：2G/5G/6G Ant.12 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 92/98 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 93/98 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 94/98 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 95/98 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 96/98 Ant. Position：GPS Ant.13 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 97/98 Ant. Position：BLE Ant.14 Doc.No.:3.8.05 Rev Regulatory WIFI Antenna Information 98/98

MRT Technology (Suzhou) Co., Ltd Report No.: 2403RSU068-U6 Phone: +86-512-66308358 Report Version: V02 Web: www.mrt-cert.com Issue Date: 2024-08-13 Template Version:0.0 1 of 310 RF MEASUREMENT REPORT FCC ID: Q9DAPIN0755 Applicant: Hewlett Packard Enterprise Company Product: ACCESS POINT Model No.: APIN0755 Trademark: FCC Classification: 15E 6GHz Low Power Indoor ACCESS POINT (6ID) FCC Rule Part(s): Part 15 Subpart E (Section 15.407) Result: Complies Received Date: 2024-03-29 Test Date: 2024-04-18 ~ 2024-07-26 Reviewed By: Jame Yuan Approved By: Robin Wu The test results relate only to the samples tested. This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in KDB789033. Test results reported herein relate only to the item(s) tested. The test report shall not be reproduced except in full without the written approval of MRT Technology (Suzhou) Co., Ltd. Report No.: 2403RSU068-U6 2 of 310 Revision History Report No. Version Description Issue Date Note 2403RSU068-U6 V01 Initial Report 2024-07-27 Invalid 2403RSU068-U6 V02 Remove some test data of channel puncturing 2024-08-13 Valid Report No.: 2403RSU068-U6 3 of 310 CONTENTS Description Page 1. General Information ................................................................................................................................ 6 1.1. Applicant ...................................................................................................................................... 6 1.2. Manufacturer ............................................................................................................................... 6 1.3. Testing Facility ............................................................................................................................. 6 1.4. Product Information ..................................................................................................................... 7 1.5. Radio Specification under Test .................................................................................................... 7 1.6. Working Frequencies ................................................................................................................... 8 1.7. Description of Antenna RF Port .................................................................................................10 1.8. Antenna Details ......................................................................................................................... 11 2. Test Configuration ................................................................................................................................. 12 2.1. Test Mode ..................................................................................................................................12 2.2. Test System Connection Diagram .............................................................................................13 2.3. Test Software .............................................................................................................................13 2.4. Applied Standards .....................................................................................................................14 2.5. Test Environment Condition ......................................................................................................14 3. Antenna Requirements ......................................................................................................................... 15 4. Measuring Instrument ........................................................................................................................... 16 5. Decision Rules and Measurement Uncertainty .................................................................................. 18 5.1. Decision Rules ...........................................................................................................................18 5.2. Measurement Uncertainty .........................................................................................................18 6. Test Result .............................................................................................................................................. 19 6.1. Summary ...................................................................................................................................19 6.2. 26dB Bandwidth Measurement .................................................................................................20 6.2.1. Test Limit ...................................................................................................................................20 6.2.2. Test Procedure ..........................................................................................................................20 6.2.3. Test Setting .............................…

Text truncated - open the document above for the full version.