Q9YSENTRY1Mobile Biometric Device

Crossmatch ™ Verifier ® Sentry Operator Manual Part Number 870391 V1.0 © Copyright, 2014 Cross Match Technologies, Inc. All rights reserved. Specifications are subject to change without prior notice. Verifier is a registered trademark, and Crossmatch is a trademark, of Cross Match Technologies, Inc. All other trademarks are the property of their respective owners. No portion of this guide may be reproduced in any form without the express written permission of Cross Match Technologies, Inc. i Contents Introduction How this book is arranged .......................................................................................... 1 Standards ................................................................................................................. 1 Glossary ................................................................................................................... 2 Specifications for the Sentry ...................................................................................... 2 Accessories for the Sentry ......................................................................................... 3 FCC Statement ........................................................................................................... 3 Industry Canada ........................................................................................................ 3 Certification identifiers for wireless modules ............................................................... 4 Recycling information ................................................................................................ 4 Battery disposal .................................................................................................... 4 WEEE Directive .......................................................................................................... 4 Description The front of the Sentry ............................................................................................... 6 The left side of the Sentry .......................................................................................... 7 The right side of the Sentry ........................................................................................ 8 The back of the Sentry ............................................................................................... 9 The top of the Sentry ................................................................................................ 10 The bottom of the Sentry ........................................................................................... 10 Use the Sentry Start the Sentry ....................................................................................................... 11 Stop the Sentry ........................................................................................................ 12 Scan a Contact Card .................................................................................................. 13 Scan a Contactless Card ............................................................................................ 14 Read an ePassport .................................................................................................... 16 Capture and verify the biometrics .............................................................................. 17 Capture a photograph ................................................................................................ 18 Read a barcode ........................................................................................................ 18 Maintenance Remove the battery ................................................................................................... 21 Install the battery .................................................................................................... 22 Insert a SAM card ..................................................................................................... 22 Remove a SAM card .................................................................................................. 22 Insert the SIM card ................................................................................................... 23 Remove the SIM card ................................................................................................ 23 Insert the Micro SD card ........................................................................................... 23 Remove the Micro SD card ......................................................................................... 24 Find the Product Label .............................................................................................. 24 Replace the fingerprint sensor ................................................................................... 24 Customer Care Technical Support ..................................................................................................... 25 iiVerifier ® Sentry Operator Manual 870391 V1.0 E-mail ..................................................................................................................... 25 Telephone and facsimile ............................................................................................ 25 Return and repair of the Sentry .................................................................................. 26 Delivery costs .......................................................................................................... 26 Contact information .................................................................................................. 26 Warranty LIMITED WARRANTY .................................................................................................. 27 Index Contents iii Figures Figure 1: The front of the Sentry ............................................................................. 6 Figure 2: The left side of the Sentry ........................................................................ 7 Figure 3: The right …

Text truncated - open the document above for the full version.

1 of 1 April 01, 2015 TIMCO Engineering Subject: Response letter to JOB 2322UC14 - Cross Match Technologies This application has been hold for months because the modules included in the host device did not meet the SAR requirements for use in a hand held device. The client has since performed SAR testing on these modules and obtained a change in identification for each module and a class II permissive change for each module. The original FCC identifiers for these modules were TFB-TIWI1-01 and QIPPHS8-P. The new FCC identifiers for these models are Q9YSENTRY2 and Q9YSENTRY3. Please find the following uploaded exhibits to support these changes: 1) Q9PSENTRY1 731 Form Rev c.doc . per request: 731 Form: Item 12(b) must be marked as yes, and item 12(c) must list the FCCIDs of the two co-located modules and the box checked for “has been granted under FCCIDs listed to the right”. 2) Q9PSENTRY1 Label Example REV B.pdf Should you have any questions or concerns, please feel free to contact me directly. Regards, Steven Hoke EMC Site Manager

Test Report Number 14F360B Product Safe ty Engine e ring, Inc 12955 Be llamy Brothe rs Blvd. Dade City, FL 33525 Te l (352) 588-2209 Fax (352) 588-2544 Page 2 of 12 D I R E C T O R Y - EMISSIONS Page(s) A)Documentation Test report1 - 10 Directory2 Test Regulations3 General Remarks10 Test-setups (Photos)11 - 12 B) Test data Conducted emissions10/150 kHz - 30 MHz5, 9 Radiated emissions10 kHz - 30 MHz5, 9 Radiated emissions30 MHz - 1000 MHz6, 9 Disturbance power30 MHz - 300 MHz6, 9 Equivalent Radiated emissions1 GHz - 18 GHz7, 9 Antenna Disturbance Voltage30 MHz - 1,000 MHz7,9 C) Appendix A Test Data Sheets A2 - A11 D) Appendix B System Under Test DescriptionB2 - B2 E) Appendix C Measurement Protocol C1 - C2 Test Report Number 14F360B Product Safe ty Engine e ring, Inc 12955 Be llamy Brothe rs Blvd. Dade City, FL 33525 Te l (352) 588-2209 Fax (352) 588-2544 Page 3 of 12 EMISSIONS TEST REGULATIONS : The emissions tests were performed according to following regulations: 9 - EN 61000-6-3:2007 9 - EN 61000-6-4:2007 9 - EN 55011 : 2009/A1:2010 9 - Group 1 9 - Group 2 9 - Class A9 - Class B 9 - EN 55013 : 2001 /A1:2003 /A2:2006 9 - EN 55014 -1: 2006/A2:2011 9 - Household appliances and similar 9 - Portable tools 9 - Semiconductor devices 9 - EN 55022:2010/AC:2011 # - Class A9 - Class B 9 - CISPR 22:2008 9 - Class A9 - Class B 9 -AS/NZS CISPR 22:2009 9 - Class A9 - Class B # - RSS-210 Issue 7 # - Class A9 - Class B 9 - CNS 13438 9 - Class A9 - Class B 9 - VCCI V-3/2010.4 # - Class A9 - Class B # - FCC Part 15.225 (per ANSI C63.4) 9- Class A9 - Class B # - Certification 9 - Verification 9 - Declaration of Conformity 9 - FCC Part 18 Test Report Number 14F360B Product Safe ty Engine e ring, Inc 12955 Be llamy Brothe rs Blvd. Dade City, FL 33525 Te l (352) 588-2209 Fax (352) 588-2544 Page 4 of 12 Environmental conditions during testing: LAB OATS Temperature: * _________ : ________ Relative Humidity: ** _________ : ________ * The ambient temperature during the testing was within the range of (50 o - 104 o F) unless indicted above. ** The humidity levels during the testing was within the range of (10% - 90%) relative humidity unless indicated above. Power supply system: 120 Volts 60 Hz SINGLE phase Sign Explanations: 9 - not applicable # - applicable Test Report Number 14F360B Product Safe ty Engine e ring, Inc 12955 Be llamy Brothe rs Blvd. Dade City, FL 33525 Te l (352) 588-2209 Fax (352) 588-2544 Page 5 of 12 Emissions Test Conditions: CONDUCTED EMISSIONS (Interference Voltage) The CONDUCTED EMISSIONS (INTERFERENCE VOLTAGE) measurements were performed at the following test location: 9 - Test not applicable 9 - Darby Test Site (Open Area Test Site) # - Darby Laboratory Test equipment used : Model NumberManufacturerDescriptionSerial Number 9 -8028-50Solar50 S LISN829012, 829022 9 -8012Solar50 S LISN924840 # -EMC-30Electro-MetricsEMI Receiver191 9 -8566BHewlett-PackardSpectrum Analyzer2421A00526 9 -85650AHewlett-PackardQuasi-Peak Adapter2043A00209 9 -85662AHewlett Packard Analyzer Display2403A07352 9 -8028-50Solar50 S LISN903725, 903726 9 -FCC-TLISN-T4-02Fisher Custom Com.Telecom ISN20454 9 - # - FCC-TLISN-T8-02 LI-125 Fisher Custom Com. Com-Power Telecom ISN 50 S LISN 20452 191080/191081 Emissions Test Conditions: RADIATED EMISSIONS (Magnetic Field) The RADIATED EMISSIONS (MAGNETIC FIELD) measurements were performed at the following test location: * AC power applied to host computer - Darby Test Site (Open Area Test Site) 9 - 9 - at a test distance of : 9 - 3 meters # - 30 meters 9 - Test not applicable Test equipment used : Model NumberManufacturerDescriptionSerial Number 9 -3148EMCOLog Periodic Antenna00044783 9 -BIA-25Electro-MetricsBiconical Antenna4283 # - 8566BHewlett-PackardSpectrum Analyzer2532A02418 # - 85662AHewlett-PackardAnalyzer Display2403A07352 # - 85650AHewlett-PackardQuasi-Peak Adapter2043A00358 # - ALR-30MElectro-MetricsLoop Antenna824 # - 8447DHewlett PackardPreamplifier2944A06901 9 - 9 - EMC-30 ALA-130/A Electro-Metrics Antenna Research EMI Receiver Loop Antenna 191 106 Test Report Number 14F360B Product Safe ty Engine e ring, Inc 12955 Be llamy Brothe rs Blvd. Dade City, FL 33525 Te l (352) 588-2209 Fax (352) 588-2544 Page 6 of 12 Emissions Test Conditions: RADIATED EMISSIONS (Electric Field) The RADIATED EMISSIONS (ELECTRIC FIELD) measurements, in the frequency range of 30 MHz-1000 MHz, were tested in a horizontal and vertical polarization at the following test location : 9 99 9 - Test not applicable # - Darby Site (Open Area Test Site) 9 - Darby Lab 9 - at a test distance of : 9 - 3 meters # - 10 meters 9 - 30 meters Test equipment used : Model NumberManufacturerDescriptionSerial Number 9 -HLP 3003CEMC AutomationHybrid Periodic Antenna017501 # - 8447DHewlett-PackardPreamplifier (26dB)2944A06901 # - 8566BHewlett-PackardSpectrum Analyzer2532A02418 9 -85662AHewlett-PackardAnalyzer Display2403A06604 # - 85650AHewlett-PackardQuasi-Peak Adapter2043A00358 9 -BIA 25 Electro-Metrics Biconical Antenna4283 9 -EMC-30Electro-MetricsEMI Receiver191 9 - 9 - # - 9 - # - 8566B 85650A 85662A LPA30 3104C Hewlett Packard Hewlett Packard Hewlett Packard Electro-Metrics Emco Spectrum Analyzer Quasi-Peak Adapter Analyzer Display Log Periodic Biconical Antenna 2532A02418 2043A00358 2403A07352 2280 00075927 # - 3148 ETS Lindgren Log Periodic Antenna 75741 Emissions Test Conditions): DISTURBANCE POWER The DISTURBANCE POWER measurements were performed by using the absorbing clamp on the mains and interface cables in the frequency range 30 MHz - 300 MHz at the following test location : # - Test not applicable 9 - Darby Lab 9 - Test equipment used : Model NumberManufacturerDescriptionSerial Number 9 -MDS-21Rhode&SchwarzAbsorbing Clamp8608447020 9 -8566BHewlett-PackardSpectrum Analyzer2532A02418 9 -85662AHewlett-PackardAnalyzer Display2403A07352 9 -85650AHewlett-PackardQuasi-Peak Adapter2043A00358 9 -8447DHewlett-PackardAmplifier (26 dB)2944A06901 9 - EMC-30 Electro-Metrics EMI Receiver 191 Test Report Number…

Text truncated - open the document above for the full version.

Test Report Number 14F360B Product Safe ty Engine e ring, Inc 12955 Be llamy Brothe rs Blvd. Dade City, FL 33525 Te l (352) 588-2209 Fax (352) 588-2544 Page 11 of 12 Test-setup photo(s): Conducted emission 150 kHz - 30 MHz Test Report Number 14F360B Product Safe ty Engine e ring, Inc 12955 Be llamy Brothe rs Blvd. Dade City, FL 33525 Te l (352) 588-2209 Fax (352) 588-2544 Page 12 of 12 Test-setup photo(s): Radiated emission 30 MHz - 1000 MHz