QA6-CONVERSTVLICENSED NON-BROADCAST TRANSMITTER WORN ON BODY

The Assistive Listening Device by Conversor Limited User’s Manual 39123/Conversor TV Pro A3 user guide 21/12/09 14:57 Page 1 Table of Contents: Welcome! How to Charge Conversor TV Pro Setting up Conversor TV Profor the First Time Make Sure Your Hearing Instrument is/are Working Setting up the Transmitter Setting up the Receiver To use the Receiver on its own How to Listen with Conversor TV Pro Checking the Sound Balance Sockets and Connections Care Instructions Changing the Battery in the Receiver Troubleshooting Manufacturer’s Warranty Statements of Compliance and Conformity © Copyright 2009 Conversor Limited. All rights reserved Welcome! Thank you for your purchase of Conversor TV Pro, an Assistive Listening Devices which greatly enhances the clarity of sound received by your Hearing Instrument(s). Conversor TV Proconsists of two lightweight components and charging system, including: • A Transmitter • A Pendant Receiver • A Power Supply Unit and Mains Lead Conversor Pro Pendant Receiver Conversor TV Pro Transmitter 39123/Conversor TV Pro A3 user guide 21/12/09 14:57 Page 2 Used together with your Hearing Instrument(s), Conversor TV Prowill greatly improve your ability to hear, select and focus on a particular sound. Connect the TV Pro transmitter to the television or sound source, plug in and switch on. The Pendant Receiver is worn at all times during use around your neck, either above or beneath clothing. In order to set up Conversor TV Procorrectly and to familiarize yourself with the controls and buttons, please read this User Guide carefully. *In order to receive the benefits of Conversor TV Pro, your Hearing Instrument(s) must have a “T” or Telecoil setting. How to switch on the TV Pro Transmitter and how to Charge Conversor Pro Receiver: TV Pro Transmitter Pendant Receiver Power Supply Unit TV Adapter Cable; Audio Jack Cable 1. Attach the correct mains adaptor to the charger 2. Attach to the TV Pro Transmitter and Receiver using the dual plugs 3. Plug into mains socket and charge according to the instructions below 4. The green light will flash on the transmitter indicating that it is transmitting. Note: the transmitter should be connected at all times to the charger as it has no battery. 5. The lights on the ON/OFF switch on the receiver will stay red until the unit is fully charged when they turn green 39123/Conversor TV Pro A3 user guide 21/12/09 14:57 Page 3 Below is a guide showing you charge times and corresponding battery life. * Please note that you do not need to wait until your batteries are completely run down before you recharge them. You can “top-up” the charge any time at your convenience. However it is recommended you fully discharge all batteries approximately once a month When the battery indicator light turns red, it indicates that only 25% charge remains. The battery needs recharging soon Setting up Conversor TV Profor the First Time Please ensure that the TV Pro Receiver is fully charged (see page 6). and that the TV Pro Transmitter is connected to the charger and the power switched on. 1. Make sure your hearing instrument is working Switch your Hearing Instrument to the Telecoil Mode. (See your Hearing Instrument User Guide or Consult your Audiologist.) 2. Transmitter Set-up Charge time on fully discharged batteries* 25 Minutes 40 Minutes 65 Minutes 90 Minutes 150 Minutes Approximate battery life 1 Hour 2 Hours 4 Hours 6 Hours 8 Hours Antenna wire - do not remove 1. Plug charger into the transmitter socket with symbol and switch on the power. A green light will indicate that the transmitter is working. 2. Insert Jack Plug into transmitter socket with symbol and connect twin phono plugs to TV (with or without connecting scart plug see page 11). 3. Switch TV on and select programme. Adjust the volume on the Receiver until you are comfortable with the volume level. 39123/Conversor TV Pro A3 user guide 21/12/09 14:57 Page 4 4. The Volume on the TV is independent of Conversor TV Pro and can be adjusted to suit the needs of the other listeners. 4. Do not cut off the antenna wire attached to the transmitter. Setting up Conversor TV Profor the First Time 4. Setting up the Receiver 1. Switch the Receiver ON/OFF by pressing the bottom button 2. To adjust the volume* between high and low select the button to increase the volume. 3. To adjust the volume between high and low select the button to decrease the volume. 4. Independent microphone The Conversor Pro receiver has a green light when it is “paired” correctly with the transmitter*. If the light goes Red, the Battery is low and operation may stop within the hour. If the receiver’s light is half Red and half Green the receiver is not paired with the transmitter, and the receiver uses its internal microphone. 5. To use The Conversor ProReceiver on its own The Conversor ProReceiver has an onboard microphone which enables it to be used as an assistive Listening Device without the Transmitter. To use in this mode, turn on only the Receiver. *When the receiver is too far away from the transmitter, the receiver automatically swiches to the onboard microphone. The transmitter has range of approximately 20 metres. *Volume Memory – The Conversor ProReceiver automatically stores the most recent volume level selected before the unit was switched off. This level remains selected until a new level is chosen. Each level is indicated by a “beep” when the volume control is pressed. When the top of the volume range is reached a higher pitch “beep” can be heard. 39123/Conversor TV Pro A3 user guide 21/12/09 14:58 Page 5 6. How to Listen with Conversor TV Pro Switch your hearing instrument to 'T', but do not adjust its volume control. Ensure the TV is switched on and the TV Pro transmitter green light is on. As you turn up the volume control on the Receiver, you should begin to hear sound transmitted from the TV clearly. 7. Checking the sound balance When the Hearing Instrument is set to the “T” Setting, a buzz may be heard if the Heari…

Text truncated - open the document above for the full version.

Conversor Products Limited The Lansbury Estate 102 Lower Guildford Road Knaphill Woking Surrey GU21 2EP Tel: 0870 0663499 Fax: 0870 0663669 Email: [email protected] Website: www.conversorproducts.com Attention: Application Examiner Re: Request for confidentiality Applicant: Conversor Products Limited FCC ID: QA6-CONVERSTV To whom it may concern, July 2010 Permanent Confidentiality Request is hereby submitted by Conversor Products limited to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: • Schematics • Detailed Block diagrams • Detailed Operational/Functional Description • Tune up procedure • Parts list Rationale for request for confidentiality: Conversor Products limited has invested considerable time and materials in research and development to produce the referenced product. Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. If you have questions or need further information, please contact the undersigned. Sincerely, Jeremy Brassington Managing Director Conversor Products Limited

Registered in England Number:4872186. Registered Office: The Lansbury Estate, 102 Lower Guildford Road, Woking, Surrey GU21 2EP Conversor Limited The Lansbury Estate 102 Lower Guildford Road Knaphill Woking Surrey GU21 2EP Tel: 0870 0663499 Freephone: 0800 298 9982 Fax: 0870 0663669 Email: [email protected] Website: www.conversorproducts.com Declaration of Conformity 28 th July 2010 Type of equipment: Radio receiver Model: Receiver for use with Conversor Pro and TV Pro I hereby declare that the equipment specified above conforms to the essential requirements under part 15 Subpart B equipment class CYY(communication receiver used with part 15 transmitter). The test facility used was Intertek Testing and Certification Ltd of Leatherhead, England. For and on behalf of Conversor Limited: Signed Jeremy Brassington Managing Director

QA6-CONVERSTV Internal Photographs

EMC TEST REPORT COMPANY: CONVERSOR Ltd PRODUCT : TESTING TO CFR47 PART 95G ON A CONVERSOR LTD CONVERSOR TV PRO LPRS ANSMITTER REPORT : EM10047208A WRITTEN BY: D Forrest _________________ REVIEWED BY: D Feasey _________________ TEST ENGINEER: D Forrest _________________ ISSUE: 2 DATE: 28 th July 2010 TOTAL PAGES: 20 This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Report No.: EM1047208A Page: 2 of 20 Product: LPRS Transmitter Issue Date: 28th July 2010 Model No.: Conversor TV Pro Issue No.: 2 Contents Page No. 1. TEST SUMMARY....................................................................................................... 4 1.1. Conversor TV Pro Transmitter.......................................................................... 4 2. EQUIPMENT UNDER TEST (EUT)......................................................................... 5 2.1. Description of the EUT....................................................................................... 5 2.2. EUT’s Modes of Operation................................................................................ 5 2.3. EUT Configuration Diagram.............................................................................. 5 2.4. EUT Support Equipment.................................................................................... 5 2.5. Cables Associated With the EUT..................................................................... 5 3. TESTS.......................................................................................................................... 6 3.1. Radiated Peak Power........................................................................................ 6 3.2. Occupied Bandwidth.......................................................................................... 7 3.4 Radiated Emissions < 1000MHz............................................................................... 8 Test Procedure................................................................................................................ 8 3.5 Radiated Emissions > 1000MHz......................................................................... 11 3.6 Uncertainty Budget Calculations.................................................................... 15 4 Photographs of test setups..................................................................................... 16 5 TEST EQUIPMENT.................................................................................................. 19 Annex 1.............................................................................................................................. 20 TABLES Table 1: Radiated Emissions below 1GHz............................................... 9 GRAPHS Graph 1 : Radiated Emissions below 1 GHz.............................................10 Report No.: EM1047208A Page: 3 of 20 Product: LPRS Transmitter Issue Date: 28th July 2010 Model No.: Conversor TV Pro Issue No.: 2 JOB DESCRIPTION Equipment: Low Power Radio Service Transmitter operating at 216MHz Equipment Model No.: Conversor TV Pro Equipment Serial No.: None Phase: Compliance Customer: Conversor Ltd The Landsbury Estate 102 Guildford Road Woking Surrey GU21 2EP Test Plan Reference: - Test Standards: CFR 47 Part 95G FCC Ident QA6 - CONVERSTV Test Location: Intertek ETL Semko (Leatherhead) Unit D Randalls Way Leatherhead Surrey KT22 TS Test Work Started: 10/06/2010 Test Work Completed: 14/06/2010 Report No.: EM1047208A Page: 4 of 20 Product: LPRS Transmitter Issue Date: 28th July 2010 Model No.: Conversor TV Pro Issue No.: 2 1. TEST SUMMARY 1.1. Conversor TV Pro Transmitter 1.1.1. CFR 47 Part 95 : sub part G TEST STANDARD TEST COMMENT CFR47:Part 2:1046 Radiated Power Pass CFR47:Part 2:1049 Occupied Bandwidth Pass CFR47:Part 2:1053 Spurious Radiations Note 1 Pass Note 1: This test was carried out in a FCC registered chamber, which complies with FCC limits for Radiated Emissions over the frequency range 30MHz to 1000MHz. See Annex 1 for certification number. 1.1.2. CFR 47 Part 15: sub part C (Intentional Radiators) TEST STANDARD TEST COMMENT CFR47 15: 209 Radiated Emissions (Note 1) Pass CFR47 15: 205 Restricted Bands of Operation Pass Note 1: This test was carried out in a FCC registered chamber, which complies with FCC limits for Radiated Emissions over the frequency range 30MHz to 1000MHz. All the above tests have been carried out to meet the requirements of ANSI C63.4:2003 Test procedures. Report No.: EM1047208A Page: 5 of 20 Product: LPRS Transmitter Issue Date: 28th July 2010 Model No.: Conversor TV Pro Issue No.: 2 2. EQUIPMENT UNDER TEST (EUT) 2.1. Description of the EUT The Conversor Limited “Conversor TV Pro” is a discreet radio transmitter that connects to an audio source and transmits sound to a loop inductor pendant necklace personal hearing aid. The unit can be handheld or placed on a surface near to the sound source. The transmitter is powered by an internal battery of 3.7vdc and operates in the LPRS 216MHz frequency band with a maximum radiated power limit of 100mWatts. The EUT was as received with no external visible signs of damage and was of production quality. 2.2. EU…

Text truncated - open the document above for the full version.

Receiver radiated emissions below 1GHz Transmitter radiated emissions below 1GHz Radiated Emissions above 1GHz Environmental Chamber Occupied Bandwidth